| View previous topic :: View next topic |
| Author |
Message |
njcwotx
Guru
Joined: 25 Feb 2005
Posts: 587
Location: Texas
|
 Posted: Sat Aug 22, 2009 4:45 am Post subject: Nvidia-drivers, compiz-fusion, xorg, Xgl, Aiglx[SOLVED]! |
 |
|
I cannot get compiz-fusion working, Im using the nvidia-drivers. Heres all the configs and output I can find. I have done a lot of research and trial and error but get nowhere. Need assistance.
xorg.conf
| Code: |
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 31.5 - 91.1
VertRefresh 56.0 - 85.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "False"
Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
|
xorg.log
| Code: |
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-gentoo-r4 x86_64
Current Operating System: Linux nclinux 2.6.30-gentoo-r4 #5 SMP PREEMPT Thu Aug 20 21:39:59 CDT 2009 x86_64
Build Date: 21 August 2009 02:44:06AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 21 23:25:33 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x1200
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
(II) Loader running on linux
(--) using VT number 7
(--) PCI: (0@4:0:0) nVidia Corporation unknown chipset (0x05e0) rev 161, Mem @ 0xf7000000/16777216, 0xc0000000/268435456, 0xf4000000/33554432, I/O @ 0x00009c00/128, BIOS @ 0x????????/524288
(--) PCI:*(0@5:0:0) nVidia Corporation unknown chipset (0x05e0) rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/524288
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.60 Mon May 11 15:53:29 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.60 Mon May 11 15:33:16 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "False"
(**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce GTX 295 (GT200) at PCI:5:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 917504 kBytes
(--) NVIDIA(0): VideoBIOS: 62.00.45.00.0b
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce GTX 295 at PCI:5:0:0:
(--) NVIDIA(0): Acer AL1914 (CRT-1)
(--) NVIDIA(0): NEC LCD200VX (DFP-0)
(--) NVIDIA(0): Acer AL1914 (CRT-1): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): NEC LCD200VX (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): NEC LCD200VX (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): Invalid display device in Mode Description
(WW) NVIDIA(0): "nvidia-auto-select"
(WW) NVIDIA(0): Not using mode description "nvidia-auto-select"; unable to map
(WW) NVIDIA(0): to display device
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select,nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 295 (GT200) at PCI:4:0:0 (GPU-1)
(--) NVIDIA(GPU-1): Memory: 917504 kBytes
(--) NVIDIA(GPU-1): VideoBIOS: 62.00.45.00.0a
(II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
(--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
(--) NVIDIA(GPU-1): Connected display device(s) on GeForce GTX 295 at PCI:4:0:0:
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "nvidia-auto-select,nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event4"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device HID 04d9:1135
(**) HID 04d9:1135: always reports core events
(**) HID 04d9:1135: Device: "/dev/input/event5"
(II) HID 04d9:1135: Found 5 mouse buttons
(II) HID 04d9:1135: Found x and y relative axes
(II) HID 04d9:1135: Configuring as mouse
(**) HID 04d9:1135: YAxisMapping: buttons 4 and 5
(**) HID 04d9:1135: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 04d9:1135" (type: MOUSE)
|
glxinfo snippet
| Code: |
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
.
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTX 295/PCI/SSE2
OpenGL version string: 3.0.0 NVIDIA 180.60
OpenGL shading language version string: 1.30 NVIDIA via Cg compiler
|
when run compiz-manger, I can run ccm and have some settings turned on and emeral runs, but I get no window borders and all the windows are locked in place.
Xgl seems to be an issue, but I find nothing on installing it.
| Code: |
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log
Detected PCI ID for VGA: 05:00.0 0300: 10de:05e0 (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1600x1200) to maximum 3D texture size (8192): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
Starting emerald
|
xvinfo seems to say nothign of Xgl, its what compiz-manager uses in its start up script to check for Xgl.
_________________
Drinking from the fountain of knowldege.
Sometimes sipping.
Sometimes gulping.
Always thirsting.
Last edited by njcwotx on Sun Aug 23, 2009 2:42 am; edited 1 time in total |
|
| Back to top |
|
 |
jms.gentoo
Tux's lil' helper
Joined: 07 May 2009
Posts: 98
|
| Posted: Sat Aug 22, 2009 7:15 am Post subject: |
|
|
From what I remember you don´t use xgl and aiglx but one or the other.
My belief for nvidia it will be aiglx at least on recent card.
one setting was not enabled by default in the compiz ebuild/ccm ebuild and this will give you this tipical result:
no border deco and can´t move windows.
I think you should check your config in the ccm.
look for something about windows manager (from what I recall) and you should enable it.
I am sure in the forum there is an old thread somewhere about this. |
|
| Back to top |
|
|
njcwotx
Guru
Joined: 25 Feb 2005
Posts: 587
Location: Texas
|
| Posted: Sat Aug 22, 2009 3:41 pm Post subject: |
|
|
Yes they were enabled, I had found that post, but so far no luck. I have tried several things. ill reread post i saw and see if i missed something.
its using emerald, how would I change it to another manager to see if its an emerald issue?
_________________
Drinking from the fountain of knowldege.
Sometimes sipping.
Sometimes gulping.
Always thirsting. |
|
| Back to top |
|
|
njcwotx
Guru
Joined: 25 Feb 2005
Posts: 587
Location: Texas
|
| Posted: Sun Aug 23, 2009 2:01 am Post subject: |
|
|
Ive tried many things, changing the window manager, making sure the plugins were enabled and a number of different things like fusion-icon, use flags, tons of re-emerging packages, masking to lower versions. It appears from poking around the compiz forums the xgl message is ok and not the issue, compiz is starting and running and working from a starting up point of view. There is some disconnect in the plugins or something. I just cant figure out what makes the window decorations not appear thought I have it all enabled. Tried the post about missing and no borders without luck. Is there any logs or good doc on the under-the-hood tweaks?
_________________
Drinking from the fountain of knowldege.
Sometimes sipping.
Sometimes gulping.
Always thirsting. |
|
| Back to top |
|
|
njcwotx
Guru
Joined: 25 Feb 2005
Posts: 587
Location: Texas
|
| Posted: Sun Aug 23, 2009 2:47 am Post subject: |
|
|
I did 100 things over weekend but I managed to get it to work with following several suggestions
make sure 0.8.2 for both libcompiz and compiz (masking out both -r2 and r1), emerge start fusion icon. Making sure All the proper use flags on all the packages are there.
Once fusion icon starts, start changing and setting back the settings, once I went back into config settings windows decorations, move and resize were finally responding. for 2 days I had those plugins set.
There has to have been some disconnect between plugin settings on the default install that fusion icon fixes.
_________________
Drinking from the fountain of knowldege.
Sometimes sipping.
Sometimes gulping.
Always thirsting. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
