| View previous topic :: View next topic |
| Author |
Message |
Jebediah
n00b
Joined: 22 Jul 2006
Posts: 9
Location: Poland, Snk
|
 Posted: Wed Oct 07, 2009 11:56 am Post subject: wirelees i livecd gentoo |
 |
|
Chciałbym się połączyć z internetem za pomocą wifi na laptopie z karta sieciową opartą o kontroler Atheros AR9285.
Używam livecd-amd64-minimal-20090903, sumy kontrolne się zgadzały i system poprawnie wykrył karte sieciową.
Problem jest z konfiguracją, do testów wyłączyłem zabezpieczenie na routerze WPA/WPA2
Wpisałem do /etc/conf.d/net takie coś:
| Code: | # /etc/conf.d/net
modules_wlan0=( "iwconfig" )
essid_wlan0=( "jebediah" )
preferred_aps=( "jebediah" )
config_jebediah=( "dhcp" )
dhcpcd_jebediah="-t 10"
|
I dostaje takie coś:
xx:xx:xx:xx:xx:xx - to jest w rzeczywistości MAC routera
| Code: | livecd / # /etc/init.d/net.wlan0 start
* Configuring wireless network for wlan0
* wlan0 connected to ESSID "jebediah" at xx:xx:xx:xx:xx:xx
* in managed mode on channel 1 (WEP disabled)
* Bringing up wlan0
* dhcp
* Running dhcpcd ...
wlan0: dhcpcd 4.0.13 starting
wlan0: broadcasting for a lease
wlan0: offered 192.168.0.105 from 192.168.0.1
wlan0: acknowledged 192.168.0.105 from 192.168.0.1
wlan0: checking 192.168.0.105 is available on attached networks
wlan0: NAK (null) from 192.168.0.1
[...]
wlan0: timed out
|
Podobna sprawa jest jak zabezpieczenia są uruchomione:
| Code: | # /etc/conf.d/net
modules_wlan0=( "iwconfig" )
essid_wlan0=( "jebediah" )
key_jebediah=("s:tMOD9SnNqh[1] enc open")
preferred_aps=( "jebediah" )
config_jebediah=( "dhcp" )
dhcpcd_jebediah="-t 10"
|
Wtedy:
| Code: | livecd / # /etc/init.d/net.wlan0 start
* Configuring wireless network for wlan0
* wlan0 connected to ESSID "jebediah" at xx:xx:xx:xx:xx:xx
* in managed mode on channel 1 (WEP enabled - open)
* Bringing up wlan0
* dhcp
* Running dhcpcd ...
wlan0: dhcpcd 4.0.13 starting
wlan0: broadcasting for a lease
wlan0: timed out
|
Wie ktoś jak rozwiązać problem?
Z góry dzięki  |
|
| Back to top |
|
 |
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Wed Oct 07, 2009 11:59 am Post subject: |
|
|
A z palca:
| Code: | ifconfig wlan0 up
iwconfig wlan0 key "klucz." #w przypadku gdy uzywasz wepa.
iwconfig wlan0 essid jebediah
dhcpcd wlan0 |
smiga? |
|
| Back to top |
|
|
Jebediah
n00b
Joined: 22 Jul 2006
Posts: 9
Location: Poland, Snk
|
| Posted: Wed Oct 07, 2009 12:43 pm Post subject: |
|
|
Nie śmiga, nie pobiera adresu.. 
Kończy się tak:
| Code: | livecd ~ # dhcpcd wlan0
wlan0: dhcpcd 4.0.13 starting
wlan0: waiting for carrier
wlan0: timed out
|
iwconfig wlan0:
| Code: | livecd ~ # iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"jebediah"
Mode:Managed Frequency:2.412 GHz Access Point: xx:xx:xx:xx:xx:xx
Tx-power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr:off
Encryption key:744D-4F44-3954-6E4E-7168-5B31-5D Security mode:open
Power Management:off
Link Quality=55/70 Signal level=-55 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
|
|
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Wed Oct 07, 2009 1:24 pm Post subject: |
|
|
| Nieprzyjemne, zawsze mozesz na lenia zbootowac ubuntu livecd na czas instalacji. Na atherosach sie nie znam, ale moze w dmesgu cos o missing firmware jest? |
|
| Back to top |
|
|
|
Polskie forum (Polish)
