| View previous topic :: View next topic |
| Author |
Message |
feiticeir0
Apprentice
Joined: 13 Jul 2005
Posts: 288
Location: Castelo Branco, Portugal
|
 Posted: Mon Dec 07, 2009 4:13 pm Post subject: nvidia 9300 GE 256LB [CLOSED] |
 |
|
Hi !
I've performed a fresh Gentoo install in my new computer, but now i'm stuck with Xorg and a black screen....
When i do the X -config xorg.conf.new (after performed Xorg -configure) i get a black screen and no error messages anywhere...
Even after copying xorg.conf to /etc/X11 and changed some options, i start xdm and the same black screen....
here is my lspci:
| Code: |
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03)
00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03)
00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation ICH10 USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation ICH10 USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation ICH10 USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation ICH10 USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation ICH10 HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation ICH10 PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation ICH10 PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation ICH10 USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation ICH10 USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation ICH10 USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation ICH10 USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2)
00:1f.0 ISA bridge: Intel Corporation ICH10 LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation ICH10 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation ICH10 SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation ICH10 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Device 06e0 (rev a1)
|
i'm using nvidia-drivers-190.42-r3 (i know, it's unstable, but i'm using them in two other computers and it's working fine)
I don't get any errors in /var/log/messages or /var/log/xorg.0.log...
what could it be?
Cheers
Bruno
_________________
Do It With Rhythm
Last edited by feiticeir0 on Tue Dec 15, 2009 1:55 pm; edited 1 time in total |
|
| Back to top |
|
 |
feiticeir0
Apprentice
Joined: 13 Jul 2005
Posts: 288
Location: Castelo Branco, Portugal
|
| Posted: Mon Dec 07, 2009 5:50 pm Post subject: |
|
|
Hi !
I'm getting this error in /var/log/messages (and dmesg) and i think is related to my graphics card:
| Code: |
[ 195.408126] DRHD: handling fault status reg 2
[ 195.408128] DMAR:[DMA Read] Request device [01:00.0] fault addr 12a9cb000
[ 195.408129] DMAR:[fault reason 01] Present bit in root entry is clear
[ 195.410438] DRHD: handling fault status reg 2
[ 195.410441] DMAR:[DMA Read] Request device [01:00.0] fault addr 12a9cb000
[ 195.410442] DMAR:[fault reason 01] Present bit in root entry is clear
[ 195.412716] DRHD: handling fault status reg 2
[ 195.412719] DMAR:[DMA Read] Request device [01:00.0] fault addr 12a9cb000
[ 195.412719] DMAR:[fault reason 01] Present bit in root entry is clear
[ 195.412723] DMAR:[DMA Read] Request device [01:00.0] fault addr 12a9cb000
[ 195.412724] DMAR:[fault reason 01] Present bit in root entry is clear
[ 195.415006] DRHD: handling fault status reg 2
[ 195.415010] DMAR:[DMA Read] Request device [01:00.0] fault addr 12a9cb000
[ 195.415010] DMAR:[fault reason 01] Present bit in root entry is clear
[ 195.417214] DRHD: handling fault status reg 2
[ 195.417217] DMAR:[DMA Read] Request device [01:00.0] fault addr 12a9cb000
[ 195.417218] DMAR:[fault reason 01] Present bit in root entry is clear
[ 195.419534] DRHD: handling fault status reg 2
[ 195.419536] DMAR:[DMA Read] Request device [01:00.0] fault addr 12a9cb000
[ 195.419537] DMAR:[fault reason 01] Present bit in root entry is clear
[ 195.422397] DRHD: handling fault status reg 2
[ 195.422399] DMAR:[DMA Read] Request device [01:00.0] fault addr 12a9cb000
[ 195.422400] DMAR:[fault reason 01] Present bit in root entry is clear
|
the device 01:00.0 is my graphics card !
any idea why ?
_________________
Do It With Rhythm |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
