| View previous topic :: View next topic |
| Author |
Message |
uhai
Veteran
Joined: 23 Aug 2007
Posts: 1358
Location: Eppingen, Germany
|
 Posted: Wed Dec 16, 2009 11:09 am Post subject: (gelöst) append a correct "root=" boot option |
 |
|
Beim reboot gescheitert - sozusagen auf der Zielgeraden:
| Code: | VFS> CAnnot open root device "sda3" or unknown-block(0,0)
Please append a correct "root="boot option
here are the available partitions ... (leider abgeschnitten)
PID: 1,comm: swapper not tainted 2.6.31-gentoo-r6 #2 |
Also das sind die Partitionen:
| Code: | (chroot) livecd / # fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2a973529
Device Boot Start End Blocks Id System
/dev/sda1 * 1 32 257008+ 83 Linux
/dev/sda2 33 5000 39905460 82 Linux swap / Solaris
/dev/sda3 5001 14593 77055772+ 83 Linux
|
Dazu diese grub.conf:
| Code: | (chroot) livecd / # cat /boot/grub/grub.conf
# This is a sample grub.conf for use with Genkernel, per the Gentoo handbook
# http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=10#doc_chap2
# If you are not using Genkernel and you need help creating this file, you
# should consult the handbook. Alternatively, consult the grub.conf.sample that
# is included with the Grub documentation.
default 0
timeout 30
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title Gentoo Linux 2.6.31-r6
root (hd0,0)
kernel /boot/kernel-2.6.31-gentoo-r6 root=/dev/sda3
#initrd /boot/initramfs-genkernel-x86-2.6.24-gentoo-r5
# vim:ft=conf:
|
Sata & SCSI ist im Kernel:
| Code: | ...
#
# Executable file formats / Emulations --> Intel Core2 64bit-Kernel
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_NET=y
....
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_NET=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
...
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
...
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
... |
fstab ist wohl noch nicht eingelesen, trotzdem die auch noch:
| Code: |
(chroot) livecd / # cat /etc/fstab
# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/sda1 /boot reiserfs noauto,noatime,notail 1 2
/dev/sda3 / reiserfs noatime 0 1
/dev/sda2 none swap sw 0 0
/dev/cdrom /mnt/cdrom auto noauto,ro,user 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
|
Irgendwie kann ich den Fehler nicht finden. Sieht jemand mehr als ich?
uhai
Last edited by uhai on Thu Dec 17, 2009 8:38 am; edited 1 time in total |
|
| Back to top |
|
 |
Hollowman
Guru
Joined: 19 Apr 2007
Posts: 584
|
| Posted: Wed Dec 16, 2009 11:49 am Post subject: |
|
|
Das ist nen relativ neues System mit Sata oder?
Wenn ja dann setz ma CONFIG_SATA_AHCI is not set auf "y"
Heißt im menuconfig "AHCI SATA Support" und steht unter Device Drivers -> Serial Ata (prod)...
Sebastian |
|
| Back to top |
|
|
uhai
Veteran
Joined: 23 Aug 2007
Posts: 1358
Location: Eppingen, Germany
|
| Posted: Wed Dec 16, 2009 4:53 pm Post subject: |
|
|
Das ist ein geliehener Fujitsu/Siemens Amilo. Alle anderen Kisten hier sind mit IDE, maximal mit EIDE ausgestattet...
Aber Gentoo l'uft auf allem 
Der Tip war gut, er bootet noch nciht richtig, aber der Fehler ist jetzt ein anderer:
| Code: | Starting udevd udevd [1167]: error getting socket: Address familiy not supported by protocoll
error initialiying control socket udevd [1167]> error initialiying udevd s (Zeile bricht ab)
No /sbin/udevd found running; none killed
.....
Checking root file system....
Failed to open the device '/dev/sda3': No such file or directory
Filesystem couldn't be fixed:C
Give root password for maintenance...... |
Ich denke, udevd ist nicht im Default Runlevel / das mache ich noch.
Evtl. sollte ich notail fuer /dev/sda3 noch in fstab ergaenzen?
uhai |
|
| Back to top |
|
|
mrsteven
Veteran
Joined: 04 Jul 2003
Posts: 1938
|
| Posted: Wed Dec 16, 2009 10:31 pm Post subject: |
|
|
Ja, mit dem Konfigurieren des Kernels kann man schon mal eine Zeit verbringen, da man schnell mal irgendwas wichtiges vergisst. Im Source-Tarball von udev gibt es ein README, dort steht unter anderem das hier:
| Code: | Requirements:
- Version 2.6.25 of the Linux kernel with sysfs, procfs, signalfd, inotify,
unix domain sockets, networking and hotplug enabled:
CONFIG_HOTPLUG=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_SYSFS=y
CONFIG_SYSFS_DEPRECATED*=n
CONFIG_PROC_FS=y
CONFIG_TMPFS=y
CONFIG_INOTIFY=y
CONFIG_SIGNALFD=y
CONFIG_TMPFS_POSIX_ACL=y (user ACLs for device nodes)
CONFIG_BLK_DEV_BSG=y (SCSI tape devices)
- For reliable operation, the kernel must not use the CONFIG_SYSFS_DEPRECATED*
option.
|
Schau doch mal nach, ob du die entsprechenden Optionen alle richtig gesetzt hast.
notail ist für das root-Dateisystem nicht unbedingt nötig. An der Runlevel-Zuordnung von udev brauchst du normalerweise auch nichts ändern.
_________________
Unix philosophy: "Do one thing and do it well."
systemd: "Do everything and do it wrong." |
|
| Back to top |
|
|
uhai
Veteran
Joined: 23 Aug 2007
Posts: 1358
Location: Eppingen, Germany
|
| Posted: Thu Dec 17, 2009 8:31 am Post subject: |
|
|
Danke, zwei der Optionen habe ich übersehen. Jetzt habe ich diesen Fehler übersprungen und einen neuen. 
Manche Optionen tauchen mit make menuconfig gar nicht auf, so habe ich zum erstenmal die .config von Hand editiert. Geht eigentlich schneller...
uhai |
|
| Back to top |
|
|
Hollowman
Guru
Joined: 19 Apr 2007
Posts: 584
|
| Posted: Thu Dec 17, 2009 10:09 am Post subject: |
|
|
| Quote: | | Manche Optionen tauchen mit make menuconfig gar nicht auf, so habe ich zum erstenmal die .config von Hand editiert. Geht eigentlich schneller... |
Das hängt damit zusammen das es da auch Abhängikeiten gibt.
Du kannst in Menuconfig auch suchen. Geht genauso wie in vi. Einfach Shift + 7 (/) drücken. Dann kannst du da in das Feld was eingeben. Da siehst du die Abhängikeiten und wo sie die einzelnen Punkte befinden.
Sebastian |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
