| View previous topic :: View next topic |
| Author |
Message |
Mati
Apprentice
Joined: 02 Sep 2008
Posts: 172
|
 Posted: Sat Dec 26, 2009 5:56 pm Post subject: X Server dont start: AGPGart and more |
 |
|
Hi there,
i have serious problem to getting my xserver started correctly. I installed a new genkernel gentoo on my notebook.
It has a onboard intel graphics card.
When booting the xserver tries to start but stays black for 1 minute after returning to prompt.
I will append my /var/log/Xorg so you can see that the problem is the agpgart thing.
| Code: |
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r6 i686
Current Operating System: Linux dhcppc1 2.6.31-gentoo-r6 #1 SMP Mon Dec 14 18:48:36 GMT 2009 i686
Build Date: 04 December 2009 01:34:30PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 26 18:41:30 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/misc/
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x3aa0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:1028:024f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000ef98/8
(--) PCI: (0:0:2:1) 8086:2a43:1028:024f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6b00000/1048576
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 2.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
[drm] failed to load kernel module "i915"
(EE) intel(0): [drm] Failed to open DRM device for : No such file or directory
(EE) intel(0): Failed to become DRM master.
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xF6C00000 size 4194304
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 2728
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output HDMI-2 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_C" initialized.
(II) intel(0): HDMI output 2 detected
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 2728
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Output HDMI-2 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1440x900
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000206 to 0x00000236
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS OFIELD_INT_STATUS EFIELD_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000d0 to 0x000c00d0
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x41008600 to 0x29004000
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) intel(0): /dev/agpgart is either not available, or no memory is available
for allocation. Please enable agpgart
.(WW) intel(0): VideoRam reduced to 32760 KB (page aligned - was 32763 KB)
(WW) intel(0): DRI2: failed to open drm device
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(EE) intel(0): Failed to initialize kernel memory manager
(==) intel(0): VideoRam: 32760 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): AGP GART support is either not available or cannot be used.
Make sure your kernel has agpgart support or has
the agpgart module loaded.
(II) intel(0): Tiled allocation failed.
(WW) intel(0): Couldn't allocate tiled memory, fb compression disabled
(II) intel(0): Attempting memory allocation with untiled buffers.
(EE) intel(0): AGP GART support is either not available or cannot be used.
Make sure your kernel has agpgart support or has
the agpgart module loaded.
(II) intel(0): Untiled allocation failed.
(EE) intel(0): Couldn't allocate video memory
Fatal server error:
AddScreen/ScreenInit failed for driver 0
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information
|
I tried several things:
* Set the AGPGART Support within kernel and set the intel drivers within kerne -> Nothing changed
* After trying mknod /dev/agpgart c 10 175 this node is not available after reboot -> Nothing changed
Furthermore there are strange error-messages so i will append my /var/log/messages in the next post: |
|
| Back to top |
|
 |
Mati
Apprentice
Joined: 02 Sep 2008
Posts: 172
|
| Posted: Sat Dec 26, 2009 6:09 pm Post subject: |
|
|
here is my /var/log/messages
[code:1:e64de8fb31]
Dec 26 18:34:54 localhost su[17921]: pam_unix(su:session): session opened for user root by mat(uid=1000)
Dec 26 18:40:01 localhost cron[27131]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Dec 26 18:40:27 localhost init: Switching to runlevel: 6
Dec 26 18:40:27 localhost su[17921]: pam_unix(su:session): session closed for user root
Dec 26 18:40:29 localhost dhcpcd[17562]: eth0: received SIGTERM, stopping
Dec 26 18:40:30 localhost syslog-ng[17129]: Termination requested via signal, terminating;
Dec 26 18:40:30 localhost syslog-ng[17129]: syslog-ng shutting down; version='3.0.4'
Dec 26 18:41:20 localhost syslog-ng[17092]: syslog-ng starting up; version='3.0.4'
Dec 26 18:41:20 localhost oot=/dev/sda1:
Dec 26 18:41:20 localhost kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Dec 26 18:41:20 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Dec 26 18:41:20 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 26 18:41:20 localhost kernel: Enabling fast FPU save and restore... done.
Dec 26 18:41:20 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Dec 26 18:41:20 localhost kernel: Initializing CPU#0
Dec 26 18:41:20 localhost kernel: xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Dec 26 18:41:20 localhost kernel: Initializing HighMem for node 0 (000377fe:000dd04d)
Dec 26 18:41:20 localhost kernel: Memory: 3582832k/3621172k available (3133k kernel code, 37032k reserved, 1282k data, 344k init, 2711868k highmem)
Dec 26 18:41:20 localhost kernel: virtual kernel memory layout:
Dec 26 18:41:20 localhost kernel: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
Dec 26 18:41:20 localhost kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Dec 26 18:41:20 localhost kernel: vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
Dec 26 18:41:20 localhost kernel: lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
Dec 26 18:41:20 localhost kernel: .init : 0xc0550000 - 0xc05a6000 ( 344 kB)
Dec 26 18:41:20 localhost kernel: .data : 0xc040f54b - 0xc054ff54 (1282 kB)
Dec 26 18:41:20 localhost kernel: .text : 0xc0100000 - 0xc040f54b (3133 kB)
Dec 26 18:41:20 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Dec 26 18:41:20 localhost kernel: NR_IRQS:512
Dec 26 18:41:20 localhost kernel: Extended CMOS year: 2000
Dec 26 18:41:20 localhost kernel: Fast TSC calibration failed
Dec 26 18:41:20 localhost kernel: TSC: Using PIT calibration value
Dec 26 18:41:20 localhost kernel: Detected 2526.858 MHz processor.
Dec 26 18:41:20 localhost kernel: Console: colour VGA+ 80x25
Dec 26 18:41:20 localhost kernel: console [tty0] enabled
Dec 26 18:41:20 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.71 BogoMIPS (lpj=25268580)
Dec 26 18:41:20 localhost kernel: Mount-cache hash table entries: 512
Dec 26 18:41:20 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Dec 26 18:41:20 localhost kernel: CPU: L2 cache: 3072K
Dec 26 18:41:20 localhost kernel: CPU: Physical Processor ID: 0
Dec 26 18:41:20 localhost kernel: CPU: Processor Core ID: 0
Dec 26 18:41:20 localhost kernel: mce: CPU supports 6 MCE banks
Dec 26 18:41:20 localhost kernel: CPU0: Thermal monitoring enabled (TM2)
Dec 26 18:41:20 localhost kernel: using mwait in idle threads.
Dec 26 18:41:20 localhost kernel: Checking 'hlt' instruction... OK.
Dec 26 18:41:20 localhost kernel: Freeing SMP alternatives: 27k freed
Dec 26 18:41:20 localhost kernel: ACPI: Core revision 20090521
Dec 26 18:41:20 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Dec 26 18:41:20 localhost kernel: CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
Dec 26 18:41:20 localhost kernel: Booting processor 1 APIC 0x1 ip 0x6000
Dec 26 18:41:20 localhost kernel: Initializing CPU#1
Dec 26 18:41:20 localhost kernel: Calibrating delay using timer specific routine.. 5054.09 BogoMIPS (lpj=25270484)
Dec 26 18:41:20 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Dec 26 18:41:20 localhost kernel: CPU: L2 cache: 3072K
Dec 26 18:41:20 localhost kernel: CPU: Physical Processor ID: 0
Dec 26 18:41:20 localhost kernel: CPU: Processor Core ID: 1
Dec 26 18:41:20 localhost kernel: mce: CPU supports 6 MCE banks
Dec 26 18:41:20 localhost kernel: CPU1: Thermal monitoring enabled (TM2)
Dec 26 18:41:20 localhost kernel: CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
Dec 26 18:41:20 localhost kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Dec 26 18:41:20 localhost kernel: Brought up 2 CPUs
Dec 26 18:41:20 localhost kernel: Total of 2 processors activated (10107.81 BogoMIPS).
Dec 26 18:41:20 localhost kernel: CPU0 attaching sched-domain:
Dec 26 18:41:20 localhost kernel: domain 0: span 0-1 level MC
Dec 26 18:41:20 localhost kernel: groups: 0 1
Dec 26 18:41:20 localhost kernel: CPU1 attaching sched-domain:
Dec 26 18:41:20 localhost kernel: domain 0: span 0-1 level MC
Dec 26 18:41:20 localhost kernel: groups: 1 0
Dec 26 18:41:20 localhost kernel: NET: Registered protocol family 16
Dec 26 18:41:20 localhost kernel: EISA bus registered
Dec 26 18:41:20 localhost kernel: ACPI: bus type pci registered
Dec 26 18:41:20 localhost kernel: dca service started, version 1.8
Dec 26 18:41:20 localhost kernel: PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
Dec 26 18:41:20 localhost kernel: PCI: MCFG area at f8000000 reserved in E820
Dec 26 18:41:20 localhost kernel: PCI: Using MMCONFIG for extended config space
Dec 26 18:41:20 localhost kernel: PCI: Using configuration type 1 for base access
Dec 26 18:41:20 localhost kernel: bio: create slab <bio-0> at 0
Dec 26 18:41:20 localhost kernel: ACPI: EC: Look up EC in DSDT
Dec 26 18:41:20 localhost kernel: ACPI: BIOS _OSI(Linux) query ignored
Dec 26 18:41:20 localhost kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Dec 26 18:41:20 localhost kernel: ACPI: Interpreter enabled
Dec 26 18:41:20 localhost kernel: ACPI: (supports S0 S5)
Dec 26 18:41:20 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Dec 26 18:41:20 localhost kernel: ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
Dec 26 18:41:20 localhost kernel: ACPI: EC: driver started in interrupt mode
Dec 26 18:41:20 localhost kernel: ACPI: No dock devices found.
Dec 26 18:41:20 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Dec 26 18:41:20 localhost kernel: pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:02.0: reg 20 io port: [0xef98-0xef9f]
Dec 26 18:41:20 localhost kernel: pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:19.0: reg 10 32bit mmio: [0xf6ae0000-0xf6afffff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:19.0: reg 14 32bit mmio: [0xf6adb000-0xf6adbfff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:00:19.0: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:00:1a.7: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6adc000-0xf6adffff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:00:1b.0: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.0: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.1: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.2: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:00:1d.7: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.2: PME# supported from D3hot
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.2: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6adaf00-0xf6adafff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
Dec 26 18:41:20 localhost kernel: pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fe000-0xf69fffff]
Dec 26 18:41:20 localhost kernel: pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:0c:00.0: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: bridge 32bit mmio: [0xf6600000-0xf68fffff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: supports D1 D2
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.1: reg 10 32bit mmio: [0xf65ff800-0xf65fffff]
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.1: supports D1 D2
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.1: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.2: reg 10 32bit mmio: [0xf65ff600-0xf65ff6ff]
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.2: supports D1 D2
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.2: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.3: reg 10 32bit mmio: [0xf65ff700-0xf65ff7ff]
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.3: supports D1 D2
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.3: PME# disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1e.0: transparent bridge
Dec 26 18:41:20 localhost kernel: pci 0000:00:1e.0: bridge 32bit mmio: [0xf6500000-0xf65fffff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:00: on NUMA node 0
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Dec 26 18:41:20 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Dec 26 18:41:20 localhost kernel: SCSI subsystem initialized
Dec 26 18:41:20 localhost kernel: PCI: Using ACPI for IRQ routing
Dec 26 18:41:20 localhost kernel: pnp: PnP ACPI init
Dec 26 18:41:20 localhost kernel: ACPI: bus type pnp registered
Dec 26 18:41:20 localhost kernel: pnp: PnP ACPI: found 13 devices
Dec 26 18:41:20 localhost kernel: ACPI: ACPI bus type pnp unregistered
Dec 26 18:41:20 localhost kernel: system 00:05: ioport range 0xc80-0xcaf has been reserved
Dec 26 18:41:20 localhost kernel: system 00:05: ioport range 0xcc0-0xcff could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:09: ioport range 0xcb0-0xcbb has been reserved
Dec 26 18:41:20 localhost kernel: system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0a: ioport range 0x900-0x92f has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0a: ioport range 0x931-0x933 has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0a: ioport range 0x935-0x97f has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0a: ioport range 0x1000-0x1005 has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0a: ioport range 0x1008-0x100f has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0b: ioport range 0xf400-0xf4fe has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0b: ioport range 0x1006-0x1007 has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0b: ioport range 0x100a-0x1059 could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:0b: ioport range 0x1060-0x107f has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0b: ioport range 0x1080-0x10bf has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0b: ioport range 0x1100-0x111f has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0b: ioport range 0x1010-0x102f has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0b: ioport range 0x809-0x809 has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0x0-0x9efff could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xc0000-0xd7fff could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0x100000-0xdd04d3ff could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xdd04d400-0xddafffff could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xddb00000-0xddbfffff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
Dec 26 18:41:20 localhost kernel: system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
Dec 26 18:41:20 localhost kernel: pci 0000:00:1e.0: BAR 9: can't allocate mem resource [0x000000-0x3ffffff]
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.0: IO window: disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.0: MEM window: disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.0: PREFETCH window: disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.1: IO window: disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.1: PREFETCH window: disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.2: IO window: disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.2: MEM window: disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.2: PREFETCH window: disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: IO window: 0xd000-0xdfff
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: MEM window: 0xf6600000-0xf68fffff
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: BAR 9: can't allocate mem resource [0x000000-0x3ffffff]
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: BAR 10: can't allocate mem resource [0x000000-0x3ffffff]
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: IO window: 0x002000-0x0020ff
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: IO window: 0x002400-0x0024ff
Dec 26 18:41:20 localhost kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
Dec 26 18:41:20 localhost kernel: pci 0000:00:1e.0: IO window: 0x2000-0x2fff
Dec 26 18:41:20 localhost kernel: pci 0000:00:1e.0: MEM window: 0xf6500000-0xf65fffff
Dec 26 18:41:20 localhost kernel: pci 0000:00:1e.0: PREFETCH window: disabled
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.0: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.1: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.2: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Dec 26 18:41:20 localhost kernel: pci 0000:00:1c.3: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: pci 0000:00:1e.0: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Dec 26 18:41:20 localhost kernel: pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:0e: resource 0 io: [0xd000-0xdfff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:0e: resource 1 mem: [0xf6600000-0xf68fffff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:0e: resource 2 pref mem [0xf0000000-0xf01fffff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:03: resource 1 mem: [0xf6500000-0xf65fffff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:03: resource 3 io: [0x00-0xffff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:04: resource 0 io: [0x2000-0x20ff]
Dec 26 18:41:20 localhost kernel: pci_bus 0000:04: resource 1 io: [0x2400-0x24ff]
Dec 26 18:41:20 localhost kernel: NET: Registered protocol family 2
Dec 26 18:41:20 localhost kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 26 18:41:20 localhost kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 26 18:41:20 localhost kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Dec 26 18:41:20 localhost kernel: TCP: Hash tables configured (established 131072 bind 65536)
Dec 26 18:41:20 localhost kernel: TCP reno registered
Dec 26 18:41:20 localhost kernel: NET: Registered protocol family 1
Dec 26 18:41:20 localhost kernel: Trying to unpack rootfs image as initramfs...
Dec 26 18:41:20 localhost kernel: Freeing initrd memory: 2742k freed
Dec 26 18:41:20 localhost kernel: highmem bounce pool size: 64 pages
Dec 26 18:41:20 localhost kernel: VFS: Disk quotas dquot_6.5.2
Dec 26 18:41:20 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Dec 26 18:41:20 localhost kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 26 18:41:20 localhost kernel: NTFS driver 2.1.29 [Flags: R/O].
Dec 26 18:41:20 localhost kernel: SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Dec 26 18:41:20 localhost kernel: SGI XFS Quota Management subsystem
Dec 26 18:41:20 localhost kernel: msgmni has been set to 1708
Dec 26 18:41:20 localhost kernel: alg: No test for stdrng (krng)
Dec 26 18:41:20 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Dec 26 18:41:20 localhost kernel: io scheduler noop registered
Dec 26 18:41:20 localhost kernel: io scheduler deadline registered (default)
Dec 26 18:41:20 localhost kernel: pci 0000:00:02.0: Boot video device
Dec 26 18:41:20 localhost kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: pcieport-driver 0000:00:1c.1: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: pcieport-driver 0000:00:1c.2: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: pcieport-driver 0000:00:1c.3: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: isapnp: Scanning for PnP cards...
Dec 26 18:41:20 localhost kernel: isapnp: No Plug & Play device found
Dec 26 18:41:20 localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Dec 26 18:41:20 localhost kernel: brd: module loaded
Dec 26 18:41:20 localhost kernel: loop: module loaded
Dec 26 18:41:20 localhost kernel: input: Macintosh mouse button emulation as /class/input/input0
Dec 26 18:41:20 localhost kernel: Uniform Multi-Platform E-IDE driver
Dec 26 18:41:20 localhost kernel: ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Dec 26 18:41:20 localhost kernel: Probing IDE interface ide0...
Dec 26 18:41:20 localhost kernel: ide0: no devices on the port
Dec 26 18:41:20 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 26 18:41:20 localhost kernel: Probing IDE interface ide1...
Dec 26 18:41:20 localhost kernel: ide1: no devices on the port
Dec 26 18:41:20 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 26 18:41:20 localhost kernel: ide-gd driver 1.18
Dec 26 18:41:20 localhost kernel: ide-cd driver 5.00
Dec 26 18:41:20 localhost kernel: Loading iSCSI transport class v2.0-870.
Dec 26 18:41:20 localhost kernel: iscsi: registered transport (tcp)
Dec 26 18:41:20 localhost kernel: SCSI Media Changer driver v0.25
Dec 26 18:41:20 localhost kernel: Atheros(R) L2 Ethernet Driver - version 2.2.3
Dec 26 18:41:20 localhost kernel: Copyright (c) 2007 Atheros Corporation.
Dec 26 18:41:20 localhost kernel: jme: JMicron JMC2XX ethernet driver version 1.0.4
Dec 26 18:41:20 localhost kernel: aoe: AoE v47 initialised.
Dec 26 18:41:20 localhost kernel: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Dec 26 18:41:20 localhost kernel: i8042.c: Warning: Keylock active.
Dec 26 18:41:20 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 26 18:41:20 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Dec 26 18:41:20 localhost kernel: mice: PS/2 mouse device common for all mice
Dec 26 18:41:20 localhost kernel: EISA: Probing bus 0 at eisa.0
Dec 26 18:41:20 localhost kernel: EISA: Cannot allocate resource for mainboard
Dec 26 18:41:20 localhost kernel: Cannot allocate resource for EISA slot 1
Dec 26 18:41:20 localhost kernel: Cannot allocate resource for EISA slot 2
Dec 26 18:41:20 localhost kernel: EISA: Detected 0 cards.
Dec 26 18:41:20 localhost kernel: cpuidle: using governor ladder
Dec 26 18:41:20 localhost kernel: TCP cubic registered
Dec 26 18:41:20 localhost kernel: NET: Registered protocol family 17
Dec 26 18:41:20 localhost kernel: RPC: Registered udp transport module.
Dec 26 18:41:20 localhost kernel: RPC: Registered tcp transport module.
Dec 26 18:41:20 localhost kernel: Using IPI Shortcut mode
Dec 26 18:41:20 localhost kernel: Freeing unused kernel memory: 344k freed
Dec 26 18:41:20 localhost kernel: Write protecting the kernel text: 3136k
Dec 26 18:41:20 localhost kernel: Write protecting the kernel read-only data: 1016k
Dec 26 18:41:20 localhost kernel: input: AT Translated Set 2 keyboard as /class/input/input1
Dec 26 18:41:20 localhost kernel: libata version 3.00 loaded.
Dec 26 18:41:20 localhost kernel: Error: Driver 'pata_platform' is already registered, aborting...
Dec 26 18:41:20 localhost kernel: input: DualPoint Stick as /class/input/input2
Dec 26 18:41:20 localhost kernel: input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input3
Dec 26 18:41:20 localhost kernel: ahci 0000:00:1f.2: version 3.0
Dec 26 18:41:20 localhost kernel: ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Dec 26 18:41:20 localhost kernel: ahci: SSS flag set, parallel bus scan disabled
Dec 26 18:41:20 localhost kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
Dec 26 18:41:20 localhost kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
Dec 26 18:41:20 localhost kernel: ahci 0000:00:1f.2: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: scsi0 : ahci
Dec 26 18:41:20 localhost kernel: scsi1 : ahci
Dec 26 18:41:20 localhost kernel: scsi2 : ahci
Dec 26 18:41:20 localhost kernel: scsi3 : ahci
Dec 26 18:41:20 localhost kernel: scsi4 : ahci
Dec 26 18:41:20 localhost kernel: scsi5 : ahci
Dec 26 18:41:20 localhost kernel: ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 19
Dec 26 18:41:20 localhost kernel: ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19
Dec 26 18:41:20 localhost kernel: ata3: DUMMY
Dec 26 18:41:20 localhost kernel: ata4: DUMMY
Dec 26 18:41:20 localhost kernel: ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 19
Dec 26 18:41:20 localhost kernel: ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 19
Dec 26 18:41:20 localhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 26 18:41:20 localhost kernel: ata1.00: ATA-8: ST9250410ASG, 0003SDM1, max UDMA/133
Dec 26 18:41:20 localhost kernel: ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 26 18:41:20 localhost kernel: ata1.00: configured for UDMA/133
Dec 26 18:41:20 localhost kernel: scsi 0:0:0:0: Direct-Access ATA ST9250410ASG 0003 PQ: 0 ANSI: 5
Dec 26 18:41:20 localhost kernel: sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Dec 26 18:41:20 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec 26 18:41:20 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 26 18:41:20 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 26 18:41:20 localhost kernel: sda: sda1 sda2 < sda5 sda6 sda7 >
Dec 26 18:41:20 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Dec 26 18:41:20 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec 26 18:41:20 localhost kernel: ata2.00: ATAPI: MATSHITA DVD+/-RW UJ892, 1.01, max UDMA/100, ATAPI AN
Dec 26 18:41:20 localhost kernel: ata2.00: configured for UDMA/100
Dec 26 18:41:20 localhost kernel: scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ892 1.01 PQ: 0 ANSI: 5
Dec 26 18:41:20 localhost kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Dec 26 18:41:20 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Dec 26 18:41:20 localhost kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Dec 26 18:41:20 localhost kernel: ata5: SATA link down (SStatus 0 SControl 300)
Dec 26 18:41:20 localhost kernel: ata6: SATA link down (SStatus 0 SControl 300)
Dec 26 18:41:20 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 26 18:41:20 localhost kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
Dec 26 18:41:20 localhost kernel: NCR53c406a: no available ports found
Dec 26 18:41:20 localhost kernel: scsi: <fdomain> Detection failed (no card)
Dec 26 18:41:20 localhost kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
Dec 26 18:41:20 localhost kernel: qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
Dec 26 18:41:20 localhost kernel: NCR53c406a: no available ports found
Dec 26 18:41:20 localhost kernel: sym53c416.c: Version 1.0.0-ac
Dec 26 18:41:20 localhost kernel: Fusion MPT base driver 3.04.10
Dec 26 18:41:20 localhost kernel: Copyright (c) 1999-2008 LSI Corporation
Dec 26 18:41:20 localhost kernel: Fusion MPT SPI Host driver 3.04.10
Dec 26 18:41:20 localhost kernel: Fusion MPT FC Host driver 3.04.10
Dec 26 18:41:20 localhost kernel: Fusion MPT SAS Host driver 3.04.10
Dec 26 18:41:20 localhost kernel: 3ware Storage Controller device driver for Linux v1.26.02.002.
Dec 26 18:41:20 localhost kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
Dec 26 18:41:20 localhost kernel: Compaq SMART2 Driver (v 2.6.0)
Dec 26 18:41:20 localhost kernel: HP CISS Driver (v 3.6.20)
Dec 26 18:41:20 localhost kernel: Adaptec aacraid driver 1.1-5[2461]-ms
Dec 26 18:41:20 localhost kernel: megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
Dec 26 18:41:20 localhost kernel: megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
Dec 26 18:41:20 localhost kernel: megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
Dec 26 18:41:20 localhost kernel: QLogic Fibre Channel HBA Driver: 8.03.01-k4
Dec 26 18:41:20 localhost kernel: Emulex LightPulse Fibre Channel SCSI driver 8.3.3
Dec 26 18:41:20 localhost kernel: Copyright(c) 2004-2009 Emulex. All rights reserved.
Dec 26 18:41:20 localhost kernel: usbcore: registered new interface driver usbfs
Dec 26 18:41:20 localhost kernel: usbcore: registered new interface driver hub
Dec 26 18:41:20 localhost kernel: usbcore: registered new device driver usb
Dec 26 18:41:20 localhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1a.7: debug port 1
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Dec 26 18:41:20 localhost kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Dec 26 18:41:20 localhost kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 26 18:41:20 localhost kernel: usb usb1: Product: EHCI Host Controller
Dec 26 18:41:20 localhost kernel: usb usb1: Manufacturer: Linux 2.6.31-gentoo-r6 ehci_hcd
Dec 26 18:41:20 localhost kernel: usb usb1: SerialNumber: 0000:00:1a.7
Dec 26 18:41:20 localhost kernel: usb usb1: configuration #1 chosen from 1 choice
Dec 26 18:41:20 localhost kernel: hub 1-0:1.0: USB hub found
Dec 26 18:41:20 localhost kernel: hub 1-0:1.0: 6 ports detected
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1d.7: debug port 1
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
Dec 26 18:41:20 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Dec 26 18:41:20 localhost kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Dec 26 18:41:20 localhost kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 26 18:41:20 localhost kernel: usb usb2: Product: EHCI Host Controller
Dec 26 18:41:20 localhost kernel: usb usb2: Manufacturer: Linux 2.6.31-gentoo-r6 ehci_hcd
Dec 26 18:41:20 localhost kernel: usb usb2: SerialNumber: 0000:00:1d.7
Dec 26 18:41:20 localhost kernel: usb usb2: configuration #1 chosen from 1 choice
Dec 26 18:41:20 localhost kernel: hub 2-0:1.0: USB hub found
Dec 26 18:41:20 localhost kernel: hub 2-0:1.0: 6 ports detected
Dec 26 18:41:20 localhost kernel: Initializing USB Mass Storage driver...
Dec 26 18:41:20 localhost kernel: usbcore: registered new interface driver usb-storage
Dec 26 18:41:20 localhost kernel: USB Mass Storage support registered.
Dec 26 18:41:20 localhost kernel: uhci_hcd: USB Universal Host Controller Interface driver
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
Dec 26 18:41:20 localhost kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Dec 26 18:41:20 localhost kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 26 18:41:20 localhost kernel: usb usb3: Product: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: usb usb3: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
Dec 26 18:41:20 localhost kernel: usb usb3: SerialNumber: 0000:00:1a.0
Dec 26 18:41:20 localhost kernel: usb usb3: configuration #1 chosen from 1 choice
Dec 26 18:41:20 localhost kernel: hub 3-0:1.0: USB hub found
Dec 26 18:41:20 localhost kernel: hub 3-0:1.0: 2 ports detected
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
Dec 26 18:41:20 localhost kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Dec 26 18:41:20 localhost kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 26 18:41:20 localhost kernel: usb usb4: Product: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: usb usb4: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
Dec 26 18:41:20 localhost kernel: usb usb4: SerialNumber: 0000:00:1a.1
Dec 26 18:41:20 localhost kernel: usb usb4: configuration #1 chosen from 1 choice
Dec 26 18:41:20 localhost kernel: hub 4-0:1.0: USB hub found
Dec 26 18:41:20 localhost kernel: hub 4-0:1.0: 2 ports detected
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
Dec 26 18:41:20 localhost kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Dec 26 18:41:20 localhost kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 26 18:41:20 localhost kernel: usb usb5: Product: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: usb usb5: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
Dec 26 18:41:20 localhost kernel: usb usb5: SerialNumber: 0000:00:1a.2
Dec 26 18:41:20 localhost kernel: usb usb5: configuration #1 chosen from 1 choice
Dec 26 18:41:20 localhost kernel: hub 5-0:1.0: USB hub found
Dec 26 18:41:20 localhost kernel: hub 5-0:1.0: 2 ports detected
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
Dec 26 18:41:20 localhost kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Dec 26 18:41:20 localhost kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 26 18:41:20 localhost kernel: usb usb6: Product: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: usb usb6: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
Dec 26 18:41:20 localhost kernel: usb usb6: SerialNumber: 0000:00:1d.0
Dec 26 18:41:20 localhost kernel: usb usb6: configuration #1 chosen from 1 choice
Dec 26 18:41:20 localhost kernel: hub 6-0:1.0: USB hub found
Dec 26 18:41:20 localhost kernel: hub 6-0:1.0: 2 ports detected
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
Dec 26 18:41:20 localhost kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Dec 26 18:41:20 localhost kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 26 18:41:20 localhost kernel: usb usb7: Product: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: usb usb7: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
Dec 26 18:41:20 localhost kernel: usb usb7: SerialNumber: 0000:00:1d.1
Dec 26 18:41:20 localhost kernel: usb usb7: configuration #1 chosen from 1 choice
Dec 26 18:41:20 localhost kernel: hub 7-0:1.0: USB hub found
Dec 26 18:41:20 localhost kernel: hub 7-0:1.0: 2 ports detected
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Dec 26 18:41:20 localhost kernel: uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
Dec 26 18:41:20 localhost kernel: usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
Dec 26 18:41:20 localhost kernel: usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 26 18:41:20 localhost kernel: usb usb8: Product: UHCI Host Controller
Dec 26 18:41:20 localhost kernel: usb usb8: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
Dec 26 18:41:20 localhost kernel: usb usb8: SerialNumber: 0000:00:1d.2
Dec 26 18:41:20 localhost kernel: usb usb8: configuration #1 chosen from 1 choice
Dec 26 18:41:20 localhost kernel: hub 8-0:1.0: USB hub found
Dec 26 18:41:20 localhost kernel: hub 8-0:1.0: 2 ports detected
Dec 26 18:41:20 localhost kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 26 18:41:20 localhost kernel: usbcore: registered new interface driver hiddev
Dec 26 18:41:20 localhost kernel: usbcore: registered new interface driver usbhid
Dec 26 18:41:20 localhost kernel: usbhid: v2.6:USB HID core driver
Dec 26 18:41:20 localhost kernel: sl811: driver sl811-hcd, 19 May 2005
Dec 26 18:41:20 localhost kernel: ohci1394 0000:03:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Dec 26 18:41:20 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f65ff800-f65fffff] Max Packet=[2048] IR/IT contexts=[4/4]
Dec 26 18:41:20 localhost kernel: device-mapper: uevent: version 1.0.3
Dec 26 18:41:20 localhost kernel: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Dec 26 18:41:20 localhost kernel: usb 5-1: new full speed USB device using uhci_hcd and address 2
Dec 26 18:41:20 localhost kernel: md: raid0 personality registered for level 0
Dec 26 18:41:20 localhost kernel: md: raid1 personality registered for level 1
Dec 26 18:41:20 localhost kernel: usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
Dec 26 18:41:20 localhost kernel: usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 26 18:41:20 localhost kernel: usb 5-1: Product: 5880
Dec 26 18:41:20 localhost kernel: usb 5-1: Manufacturer: Broadcom Corp
Dec 26 18:41:20 localhost kernel: usb 5-1: SerialNumber: 0123456789ABCD
Dec 26 18:41:20 localhost kernel: usb 5-1: configuration #0 chosen from 1 choice
Dec 26 18:41:20 localhost kernel: usb 5-1: config 0 descriptor??
Dec 26 18:41:20 localhost kernel: raid6: int32x1 970 MB/s
Dec 26 18:41:20 localhost kernel: raid6: int32x2 975 MB/s
Dec 26 18:41:20 localhost kernel: raid6: int32x4 715 MB/s
Dec 26 18:41:20 localhost kernel: raid6: int32x8 652 MB/s
Dec 26 18:41:20 localhost kernel: raid6: mmxx1 2958 MB/s
Dec 26 18:41:20 localhost kernel: raid6: mmxx2 3375 MB/s
Dec 26 18:41:20 localhost kernel: raid6: sse1x1 2045 MB/s
Dec 26 18:41:20 localhost kernel: raid6: sse1x2 2567 MB/s
Dec 26 18:41:20 localhost kernel: raid6: sse2x1 3706 MB/s
Dec 26 18:41:20 localhost kernel: raid6: sse2x2 4210 MB/s
Dec 26 18:41:20 localhost kernel: raid6: using algorithm sse2x2 (4210 MB/s)
Dec 26 18:41:20 localhost kernel: async_tx: api initialized (async)
Dec 26 18:41:20 localhost kernel: xor: automatically using best checksumming function: pIII_sse
Dec 26 18:41:20 localhost kernel: pIII_sse : 9197.600 MB/sec
Dec 26 18:41:20 localhost kernel: xor: using function: pIII_sse (9197.600 MB/sec)
Dec 26 18:41:20 localhost kernel: md: raid6 personality registered for level 6
Dec 26 18:41:20 localhost kernel: md: raid5 personality registered for level 5
Dec 26 18:41:20 localhost kernel: md: raid4 personality registered for level 4
Dec 26 18:41:20 localhost kernel: md: raid10 personality registered for level 10
Dec 26 18:41:20 localhost kernel: JFS: nTxBlock = 8192, nTxLock = 65536
Dec 26 18:41:20 localhost kernel: fuse init (API version 7.12)
Dec 26 18:41:20 localhost kernel: Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Dec 26 18:41:20 localhost kernel: Copyright (c) 1999-2006 Intel Corporation.
Dec 26 18:41:20 localhost kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc0000ada4090]
Dec 26 18:41:20 localhost kernel: EXT4-fs (/dev/sda1): Update your userspace programs to mount using ext4
Dec 26 18:41:20 localhost kernel: EXT4-fs (/dev/sda1): ext4dev backwards compatibility will go away by 2.6.31
Dec 26 18:41:20 localhost kernel: UDF-fs: No partition found (1)
Dec 26 18:41:20 localhost kernel: XFS mounting filesystem sda1
Dec 26 18:41:20 localhost kernel: Ending clean XFS mount for filesystem: sda1
Dec 26 18:41:20 localhost kernel: udev: starting version 146
Dec 26 18:41:20 localhost kernel: <3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly
Dec 26 18:41:20 localhost kernel: dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Dec 26 18:41:20 localhost kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
Dec 26 18:41:20 localhost kernel: e1000e: Copyright (c) 1999-2008 Intel Corporation.
Dec 26 18:41:20 localhost kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Dec 26 18:41:20 localhost kernel: e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
Dec 26 18:41:20 localhost kernel: e1000e 0000:00:19.0: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: 0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts.
Dec 26 18:41:20 localhost kernel: ACPI: AC Adapter [AC] (on-line)
Dec 26 18:41:20 localhost kernel: Real Time Clock Driver v1.12b
Dec 26 18:41:20 localhost kernel: ACPI: Battery Slot [BAT0] (battery present)
Dec 26 18:41:20 localhost kernel: ACPI: Battery Slot [BAT1] (battery absent)
Dec 26 18:41:20 localhost kernel: input: Lid Switch as /class/input/input4
Dec 26 18:41:20 localhost kernel: ACPI: Lid Switch [LID]
Dec 26 18:41:20 localhost kernel: input: Power Button as /class/input/input5
Dec 26 18:41:20 localhost kernel: ACPI: Power Button [PBTN]
Dec 26 18:41:20 localhost kernel: input: Sleep Button as /class/input/input6
Dec 26 18:41:20 localhost kernel: ACPI: Sleep Button [SBTN]
Dec 26 18:41:20 localhost kernel: thermal LNXTHERM:01: registered as thermal_zone0
Dec 26 18:41:20 localhost kernel: ACPI: Thermal Zone [THM] (37 C)
Dec 26 18:41:20 localhost kernel: ACPI: SSDT dd050995 00281 (v01 PmRef BspIst 00003000 INTL 20050624)
Dec 26 18:41:20 localhost kernel: ACPI: SSDT dd050ded 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
Dec 26 18:41:20 localhost kernel: Monitor-Mwait will be used to enter C-1 state
Dec 26 18:41:20 localhost kernel: Monitor-Mwait will be used to enter C-2 state
Dec 26 18:41:20 localhost kernel: Monitor-Mwait will be used to enter C-3 state
Dec 26 18:41:20 localhost kernel: Marking TSC unstable due to TSC halts in idle
Dec 26 18:41:20 localhost kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Dec 26 18:41:20 localhost kernel: processor LNXCPU:00: registered as cooling_device0
Dec 26 18:41:20 localhost kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Dec 26 18:41:20 localhost kernel: ACPI: SSDT dd050c16 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
Dec 26 18:41:20 localhost kernel: ACPI: SSDT dd0513b3 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
Dec 26 18:41:20 localhost kernel: 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:e9:90:68
Dec 26 18:41:20 localhost kernel: 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
Dec 26 18:41:20 localhost kernel: 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 4003ff-0ff
Dec 26 18:41:20 localhost kernel: yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:024f]
Dec 26 18:41:20 localhost kernel: yenta_cardbus 0000:03:01.0: CardBus bridge, secondary bus 0000:04
Dec 26 18:41:20 localhost kernel: yenta_cardbus 0000:03:01.0: IO window: 0x002000-0x0020ff
Dec 26 18:41:20 localhost kernel: yenta_cardbus 0000:03:01.0: IO window: 0x002400-0x0024ff
Dec 26 18:41:20 localhost kernel: yenta_cardbus 0000:03:01.0: PREFETCH window: 0xf0400000-0xf07fffff
Dec 26 18:41:20 localhost kernel: yenta_cardbus 0000:03:01.0: MEM window: 0xf0800000-0xf0bfffff
Dec 26 18:41:20 localhost kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Dec 26 18:41:20 localhost kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
Dec 26 18:41:20 localhost kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Dec 26 18:41:20 localhost kernel: processor LNXCPU:01: registered as cooling_device1
Dec 26 18:41:20 localhost kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Dec 26 18:41:20 localhost kernel: acpi device:40: registered as cooling_device2
Dec 26 18:41:20 localhost kernel: input: Video Bus as /class/input/input7
Dec 26 18:41:20 localhost kernel: ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
Dec 26 18:41:20 localhost kernel: ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
Dec 26 18:41:20 localhost kernel: input: Video Bus as /class/input/input8
Dec 26 18:41:20 localhost kernel: ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
Dec 26 18:41:20 localhost kernel: yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x04b8, PCI irq 19
Dec 26 18:41:20 localhost kernel: yenta_cardbus 0000:03:01.0: Socket |
|
| Back to top |
|
|
Mati
Apprentice
Joined: 02 Sep 2008
Posts: 172
|
| Posted: Sat Dec 26, 2009 6:10 pm Post subject: |
|
|
And my dmesg output:
| Code: |
5536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Initializing HighMem for node 0 (000377fe:000dd04d)
Memory: 3582832k/3621172k available (3133k kernel code, 37032k reserved, 1282k data, 344k init, 2711868k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0550000 - 0xc05a6000 ( 344 kB)
.data : 0xc040f54b - 0xc054ff54 (1282 kB)
.text : 0xc0100000 - 0xc040f54b (3133 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
NR_IRQS:512
Extended CMOS year: 2000
Fast TSC calibration failed
TSC: Using PIT calibration value
Detected 2526.858 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.71 BogoMIPS (lpj=25268580)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 27k freed
ACPI: Core revision 20090521
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5054.09 BogoMIPS (lpj=25270484)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10107.81 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
dca service started, version 1.8
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0xef98-0xef9f]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xf6ae0000-0xf6afffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xf6adb000-0xf6adbfff]
pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6adc000-0xf6adffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6adaf00-0xf6adafff]
pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fe000-0xf69fffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf6600000-0xf68fffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.1: reg 10 32bit mmio: [0xf65ff800-0xf65fffff]
pci 0000:03:01.1: supports D1 D2
pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.1: PME# disabled
pci 0000:03:01.2: reg 10 32bit mmio: [0xf65ff600-0xf65ff6ff]
pci 0000:03:01.2: supports D1 D2
pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.2: PME# disabled
pci 0000:03:01.3: reg 10 32bit mmio: [0xf65ff700-0xf65ff7ff]
pci 0000:03:01.3: supports D1 D2
pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf6500000-0xf65fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:09: ioport range 0xcb0-0xcbb has been reserved
system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:0a: ioport range 0x900-0x92f has been reserved
system 00:0a: ioport range 0x931-0x933 has been reserved
system 00:0a: ioport range 0x935-0x97f has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x1000-0x1005 has been reserved
system 00:0a: ioport range 0x1008-0x100f has been reserved
system 00:0b: ioport range 0xf400-0xf4fe has been reserved
system 00:0b: ioport range 0x1006-0x1007 has been reserved
system 00:0b: ioport range 0x100a-0x1059 could not be reserved
system 00:0b: ioport range 0x1060-0x107f has been reserved
system 00:0b: ioport range 0x1080-0x10bf has been reserved
system 00:0b: ioport range 0x1100-0x111f has been reserved
system 00:0b: ioport range 0x1010-0x102f has been reserved
system 00:0b: ioport range 0x809-0x809 has been reserved
system 00:0c: iomem range 0x0-0x9efff could not be reserved
system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xd7fff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0xdd04d3ff could not be reserved
system 00:0c: iomem range 0xdd04d400-0xddafffff could not be reserved
system 00:0c: iomem range 0xddb00000-0xddbfffff has been reserved
system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved
system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
pci 0000:00:1e.0: BAR 9: can't allocate mem resource [0x000000-0x3ffffff]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: disabled
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e
pci 0000:00:1c.3: IO window: 0xd000-0xdfff
pci 0000:00:1c.3: MEM window: 0xf6600000-0xf68fffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
pci 0000:03:01.0: BAR 9: can't allocate mem resource [0x000000-0x3ffffff]
pci 0000:03:01.0: BAR 10: can't allocate mem resource [0x000000-0x3ffffff]
pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:01.0: IO window: 0x002000-0x0020ff
pci 0000:03:01.0: IO window: 0x002400-0x0024ff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xf6500000-0xf65fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
pci_bus 0000:0e: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:0e: resource 1 mem: [0xf6600000-0xf68fffff]
pci_bus 0000:0e: resource 2 pref mem [0xf0000000-0xf01fffff]
pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xf6500000-0xf65fffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:04: resource 0 io: [0x2000-0x20ff]
pci_bus 0000:04: resource 1 io: [0x2400-0x24ff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2742k freed
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 1708
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: setting latency timer to 64
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: no devices on the port
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
SCSI Media Changer driver v0.25
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.4
aoe: AoE v47 initialised.
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI Shortcut mode
Freeing unused kernel memory: 344k freed
Write protecting the kernel text: 3136k
Write protecting the kernel read-only data: 1016k
input: AT Translated Set 2 keyboard as /class/input/input1
libata version 3.00 loaded.
Error: Driver 'pata_platform' is already registered, aborting...
input: DualPoint Stick as /class/input/input2
input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input3
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 19
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 19
ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 19
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9250410ASG, 0003SDM1, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9250410ASG 0003 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: MATSHITA DVD+/-RW UJ892, 1.01, max UDMA/100, ATAPI AN
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ892 1.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
NCR53c406a: no available ports found
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.10
Fusion MPT FC Host driver 3.04.10
Fusion MPT SAS Host driver 3.04.10
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2461]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.03.01-k4
Emulex LightPulse Fibre Channel SCSI driver 8.3.3
Copyright(c) 2004-2009 Emulex. All rights reserved.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-gentoo-r6 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-gentoo-r6 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ohci1394 0000:03:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f65ff800-f65fffff] Max Packet=[2048] IR/IT contexts=[4/4]
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
usb 5-1: new full speed USB device using uhci_hcd and address 2
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: 5880
usb 5-1: Manufacturer: Broadcom Corp
usb 5-1: SerialNumber: 0123456789ABCD
usb 5-1: configuration #0 chosen from 1 choice
usb 5-1: config 0 descriptor??
raid6: int32x1 970 MB/s
raid6: int32x2 975 MB/s
raid6: int32x4 715 MB/s
raid6: int32x8 652 MB/s
raid6: mmxx1 2958 MB/s
raid6: mmxx2 3375 MB/s
raid6: sse1x1 2045 MB/s
raid6: sse1x2 2567 MB/s
raid6: sse2x1 3706 MB/s
raid6: sse2x2 4210 MB/s
raid6: using algorithm sse2x2 (4210 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 9197.600 MB/sec
xor: using function: pIII_sse (9197.600 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
fuse init (API version 7.12)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc0000ada4090]
EXT4-fs (/dev/sda1): Update your userspace programs to mount using ext4
EXT4-fs (/dev/sda1): ext4dev backwards compatibility will go away by 2.6.31
UDF-fs: No partition found (1)
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
udev: starting version 146
<3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
e1000e 0000:00:19.0: setting latency timer to 64
0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts.
ACPI: AC Adapter [AC] (on-line)
Real Time Clock Driver v1.12b
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Power Button as /class/input/input5
ACPI: Power Button [PBTN]
input: Sleep Button as /class/input/input6
ACPI: Sleep Button [SBTN]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (37 C)
ACPI: SSDT dd050995 00281 (v01 PmRef BspIst 00003000 INTL 20050624)
ACPI: SSDT dd050ded 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT dd050c16 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT dd0513b3 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:e9:90:68
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 4003ff-0ff
yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:024f]
yenta_cardbus 0000:03:01.0: CardBus bridge, secondary bus 0000:04
yenta_cardbus 0000:03:01.0: IO window: 0x002000-0x0020ff
yenta_cardbus 0000:03:01.0: IO window: 0x002400-0x0024ff
yenta_cardbus 0000:03:01.0: PREFETCH window: 0xf0400000-0xf07fffff
yenta_cardbus 0000:03:01.0: MEM window: 0xf0800000-0xf0bfffff
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
acpi device:40: registered as cooling_device2
input: Video Bus as /class/input/input7
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
input: Video Bus as /class/input/input8
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x04b8, PCI irq 19
yenta_cardbus 0000:03:01.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf6500000 - 0xf65fffff
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0c:00.0: setting latency timer to 64
iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
phy0: Selected rate control algorithm 'iwl-agn-rs'
FAT: bogus number of FAT structure
VFS: Can't find a valid FAT filesystem on dev sda5.
Adding 5454028k swap on /dev/sda7. Priority:-1 extents:1 across:5454028k
Clocksource tsc unstable (delta = -83544463 ns)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
|
|
|
| Back to top |
|
|
cach0rr0
Bodhisattva
Joined: 13 Nov 2008
Posts: 4123
Location: Houston, Republic of Texas
|
| Posted: Sat Dec 26, 2009 6:19 pm Post subject: |
|
|
hiya
can you post your lspci -n, cat /proc/cpuinfo, cat /etc/fstab, and ls -l /usr/src/linux ?
Would also be helpful if you hit pastebin.com and dump your kernel .config there, then share the link with us.
_________________
Lost configuring your system?
dump lspci -n here | see Pappy's guide | Link Stash |
|
| Back to top |
|
|
Mati
Apprentice
Joined: 02 Sep 2008
Posts: 172
|
| Posted: Sat Dec 26, 2009 6:32 pm Post subject: |
|
|
Thanks. I post everything:
lspci:
| Code: |
00:00.0 0600: 8086:2a40 (rev 07)
00:02.0 0300: 8086:2a42 (rev 07)
00:02.1 0380: 8086:2a43 (rev 07)
00:19.0 0200: 8086:10f5 (rev 03)
00:1a.0 0c03: 8086:2937 (rev 03)
00:1a.1 0c03: 8086:2938 (rev 03)
00:1a.2 0c03: 8086:2939 (rev 03)
00:1a.7 0c03: 8086:293c (rev 03)
00:1b.0 0403: 8086:293e (rev 03)
00:1c.0 0604: 8086:2940 (rev 03)
00:1c.1 0604: 8086:2942 (rev 03)
00:1c.2 0604: 8086:2944 (rev 03)
00:1c.3 0604: 8086:2946 (rev 03)
00:1d.0 0c03: 8086:2934 (rev 03)
00:1d.1 0c03: 8086:2935 (rev 03)
00:1d.2 0c03: 8086:2936 (rev 03)
00:1d.7 0c03: 8086:293a (rev 03)
00:1e.0 0604: 8086:2448 (rev 93)
00:1f.0 0601: 8086:2917 (rev 03)
00:1f.2 0104: 8086:282a (rev 03)
00:1f.3 0c05: 8086:2930 (rev 03)
03:01.0 0607: 1180:0476 (rev ba)
03:01.1 0c00: 1180:0832 (rev 04)
03:01.2 0805: 1180:0822 (rev 21)
03:01.3 0880: 1180:0843 (rev 11)
0c:00.0 0280: 8086:4232
|
Then cpuinfo:
| Code: |
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz
stepping : 10
cpu MHz : 2527.248
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida tpr_shadow vnmi flexpriority
bogomips : 5054.49
clflush size : 64
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz
stepping : 10
cpu MHz : 2527.248
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida tpr_shadow vnmi flexpriority
bogomips : 5054.09
clflush size : 64
power management:
|
Here my fstab
| Code: |
# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
#/dev/BOOT /boot ext2 noauto,noatime 1 2
/dev/sda1 / xfs noatime 0 1
/dev/sda5 /home vfat defaults,noatime 0 0
/dev/sda7 none swap sw 0 0
/dev/cdrom /mnt/cdrom auto noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
|
and finally my /usr/src/linux
| Code: |
lrwxrwxrwx 1 root root 22 Dec 2 12:21 /usr/src/linux -> linux-2.6.31-gentoo-r6
|
concerning the bin post. here is the link:
http://pastebin.com/m647d97a0 |
|
| Back to top |
|
|
dtjohnst
Apprentice
Joined: 23 Apr 2006
Posts: 178
|
| Posted: Mon Dec 28, 2009 6:25 pm Post subject: |
|
|
You mention | Quote: | | * After trying mknod /dev/agpgart c 10 175 this node is not available after reboot -> Nothing changed |
What about before the reboot? Does it work then?
I also know this was a common problem with older onboard Intel graphics cards... The resolution at the time was to bump up the amount of memory allocated in BIOS or decrease the colour depth set as default in xorg.conf. Any chance you could paste your xorg.conf as well (if it's really long, use pastebin again please)? |
|
| Back to top |
|
|
Mati
Apprentice
Joined: 02 Sep 2008
Posts: 172
|
| Posted: Mon Dec 28, 2009 8:54 pm Post subject: |
|
|
I forgot to set the kernel to boot directory. Now i think the AGPGart is working.
After rebooting the screen changes to black one with white underscore on top left side. After 20 seconds a login-screen cames but i have no possibility to type anything. And getting back to prompt did not work so i deleted xdm from runlevel by chroot from live cd.
Now i can get back to prompt.
Lets have a look into the new Xorg:
| Code: |
Fatal server error:
Cannot establish any listening sockets - Make sure an X Server isn't already running
Pleaye consult the....
|
Very strange is after booting when typing into the prompt startx as root i have to wait about 60 seconds with black screen and after that the fluxbox appears. but there i cannot use mouse or keyboard. Possibly wrong xorg.conf?And why does fluxbox not
start alone...i have the file .xinitrc in my home directory with the command exec fluxbox
When I want to start fluxbox from prompt it complains with Cannot connect to XServer. So what can i do now?
Do you need any additional information/files?
Thanks again |
|
| Back to top |
|
|
Deathwing00
Bodhisattva
Joined: 13 Jun 2003
Posts: 4087
Location: Dresden, Germany
|
| Posted: Fri Apr 02, 2010 12:09 pm Post subject: |
|
|
| Moved from Installing Gentoo to Desktop Environments. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
