| View previous topic :: View next topic |
| Author |
Message |
samo
Guru
Joined: 13 Mar 2004
Posts: 489
|
 Posted: Sun Jan 17, 2010 6:56 pm Post subject: Failed to open root device with udev-146-r1 [solved] |
 |
|
Hi,
after updating udev-141 to udev-146-r1 my system hangs at startup with the following message: | Code: | ...
Checksum root filesystem
Failed to open device '/dev/sda3': No such file or directory
Filesystem couldn't be fixed
... |
How could I solve the problem?
Last edited by samo on Wed Feb 24, 2010 5:50 am; edited 1 time in total |
|
| Back to top |
|
 |
francofallica
n00b
Joined: 17 Mar 2008
Posts: 33
|
| Posted: Sun Jan 17, 2010 7:00 pm Post subject: |
|
|
did you try to run:
fsck -y /dev/sda3 |
|
| Back to top |
|
|
samo
Guru
Joined: 13 Mar 2004
Posts: 489
|
| Posted: Sun Jan 17, 2010 8:47 pm Post subject: |
|
|
| No, I didn't try. After downgrade to version 141 it works. But with version 146 not. |
|
| Back to top |
|
|
samo
Guru
Joined: 13 Mar 2004
Posts: 489
|
| Posted: Sat Jan 23, 2010 2:35 pm Post subject: |
|
|
| Problem is still pending |
|
| Back to top |
|
|
Hu
Administrator
Joined: 06 Mar 2007
Posts: 23070
|
| Posted: Sun Feb 21, 2010 9:34 pm Post subject: |
|
|
| Please post the output of nl /etc/fstab ; nl /boot/grub/grub.conf ; find /dev -mindepth 1 -maxdepth 1 -name '?d?*' -ls, as run from the working udev. |
|
| Back to top |
|
|
samo
Guru
Joined: 13 Mar 2004
Posts: 489
|
| Posted: Sun Feb 21, 2010 9:45 pm Post subject: |
|
|
With udev-141 I get the following outputs:
| Code: | # nl /etc/fstab
1 # /etc/fstab: static file system information.
2 # $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.14 2003/10/13 20:03:38 azarah Exp $
3 #
4 # noatime turns off atimes for increased performance (atimes normally aren't
5 # needed; notail increases performance of ReiserFS (at the expense of storage
6 # efficiency). It's safe to drop the noatime options if you want and to
7 # switch between notail and tail freely.
8 # <fs> <mountpoint> <type> <opts> <dump/pass>
9 # NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
10 /dev/sda1 /boot ext2 noauto,noatime 1 2
11 /dev/sda2 none swap sw 0 0
12 /dev/sda3 / reiserfs noatime 0 1
13 /dev/sdb6 /mnt/store ext2 noatime 0 0
14 /dev/fd0 /mnt/floppy auto noauto,user 0 0
15 # NOTE: The next line is critical for boot!
16 none /proc proc defaults 0 0
17 # glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
18 # POSIX shared memory (shm_open, shm_unlink).
19 # (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
20 # use almost no memory if not populated with files)
21 # Adding the following line to /etc/fstab should take care of this:
22 none /dev/shm tmpfs nodev,nosuid,noexec 0 0
23 none /proc/bus/usb usbfs defaults 0 0 |
| Code: | # nl /boot/grub/grub.conf
1 #
2 # Sample boot menu configuration file
3 #
4 # Boot automatically after 30 secs.
5 timeout 10
6 # By default, boot the first entry.
7 default 0
8 # Fallback to the second entry.
9 fallback 1
10 splashimage=(hd0,0)/boot/grub/splash.xpm.gz
11 # For booting gentoo on /dev/sda3
12 title gentoo-sda3-2.6.31-gentoo-r9
13 root (hd0,0)
14 kernel /vmlinuz root=/dev/sda3 splash=verbose,theme:emergence video=uvesafb:1024x768-32@75,mtrr:3,ywrap console=tty1
15 initrd /boot/myinitrd/img.cpio.gz
16 # For booting gentoo on /dev/sda3
17 title gentoo-sda3-2.6.31-gentoo-r6
18 root (hd0,0)
19 kernel /vmlinuz-2.6.31-gentoo-r6 root=/dev/sda3 splash=verbose,theme:emergence video=uvesafb:1024x768-32@75,mtrr:3,ywrap console=tty1
20 initrd /boot/myinitrd/img.cpio.gz
21 # For booting gentoo on /dev/sda5
22 title gentoo-sda5-2.6.31-gentoo-r9
23 root (hd0,0)
24 kernel /vmlinuz-2.6.31-gentoo-r9 root=/dev/sda5 splash=verbose,theme:emergence video=uvesafb:1024x768-32@75,mtrr:3,ywrap console=tty1
25 initrd /boot/myinitrd/img.cpio.gz
26 # For booting kubuntu on /dev/sda6
27 title kubuntu
28 root (hd0,5)
29 kernel (hd0,5)/boot/vmlinuz-2.6.31-14-generic root=/dev/sda6
30 initrd (hd0,5)/boot/initrd.img-2.6.31-14-generic
31 # Change the colors.
32 title Change the colors
33 color light-green/brown blink-red/blue |
| Code: | # find /dev -mindepth 1 -maxdepth 1 -name '?d?*' -ls
4086 0 crw-rw---- 1 root audio Feb 21 18:24 /dev/adsp1
2989 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sda1 -> usb/flash/sda1
2964 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sdb6 -> usb/flash/sdb6
2940 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sda5 -> usb/flash/sda5
2916 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sdb5 -> usb/flash/sdb5
2891 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sda7 -> usb/flash/sda7
2861 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sdb3 -> usb/flash/sdb3
2836 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sda2 -> usb/flash/sda2
2811 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sda6 -> usb/flash/sda6
2786 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sda3 -> usb/flash/sda3
2757 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sdb1 -> usb/flash/sdb1
2735 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sdb2 -> usb/flash/sdb2
2637 0 lrwxrwxrwx 1 root root 3 Feb 21 18:24 /dev/cdrw6 -> sr0
2634 0 lrwxrwxrwx 1 root root 3 Feb 21 18:24 /dev/cdrom6 -> sr0
2614 0 lrwxrwxrwx 1 root root 3 Feb 21 18:24 /dev/cdrom3 -> sr1
2577 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sdb4 -> usb/flash/sdb4
2486 0 lrwxrwxrwx 1 root root 14 Feb 21 18:24 /dev/sda4 -> usb/flash/sda4
2364 0 brw-rw---- 1 root disk Feb 21 18:24 /dev/sda
2342 0 brw-rw---- 1 root disk Feb 21 18:24 /dev/sdb
2244 0 brw-rw---- 1 root floppy Feb 21 18:24 /dev/fd0 |
|
|
| Back to top |
|
|
Hu
Administrator
Joined: 06 Mar 2007
Posts: 23070
|
| Posted: Mon Feb 22, 2010 5:21 am Post subject: |
|
|
| What kind of hardware backs sda? You may need to upgrade to a new udev and explore the dev that it creates, then adjust your kernel line accordingly. |
|
| Back to top |
|
|
samo
Guru
Joined: 13 Mar 2004
Posts: 489
|
| Posted: Mon Feb 22, 2010 8:23 pm Post subject: |
|
|
That's it.
I'm using the following udev rules: | Code: | # nl /etc/udev/rules.d/10-udev.rules
1 # Harddisc
2 SUBSYSTEMS=="scsi", KERNEL=="sd?[0-9]", ATTRS{model}=="SAMSUNG HD250HJ", NAME="hd/samsung_hd%n", SYMLINK+="%k", GROUP="disk", MODE="0660"
3 ACTION=="add" SUBSYSTEMS=="scsi", KERNEL=="sd?[0-9]", ATTRS{model}=="Maxtor 6Y080L0", NAME="hd/maxtor_hd%n", SYMLINK+="%k", GROUP="disk", MODE="0660"
4 ACTION=="add" SUBSYSTEMS=="scsi", KERNEL=="sd?[0-9]", ATTRS{model}=="Seagate FreeAgen", NAME="hd/freeagent", SYMLINK+="%k", GROUP="disk", MODE="0660"
5 # Flash
6 #SUBSYSTEMS=="scsi", KERNEL=="sd?[0-9]", NAME="usb/flash/%k", SYMLINK+="%k", GROUP="disk", MODE="0660"
7 SUBSYSTEMS=="scsi", KERNEL=="sd?[0-9]", ATTRS{model}=="SAMSUNG SUM-4G", NAME="usb/samsung%n", SYMLINK+="%k", GROUP="disk", MODE="0660"
8 SUBSYSTEMS=="scsi", KERNEL=="sd?1", ATTRS{model}=="Memorybird", NAME="usb/memorybird", SYMLINK+="%k", GROUP="disk", MODE="0660"
9 SUBSYSTEMS=="scsi", KERNEL=="sd?1", ATTRS{model}=="USB 2.0", NAME="usb/greenhills", SYMLINK+="%k", GROUP="disk", MODE="0660" |
I adjusted my /etc/fstab in the following way: | Code: | # nl /etc/fstab
1 # /etc/fstab: static file system information.
2 # $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.14 2003/10/13 20:03:38 azarah Exp $
3 #
4 # noatime turns off atimes for increased performance (atimes normally aren't
5 # needed; notail increases performance of ReiserFS (at the expense of storage
6 # efficiency). It's safe to drop the noatime options if you want and to
7 # switch between notail and tail freely.
8 # <fs> <mountpoint> <type> <opts> <dump/pass>
9 # NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
10 /dev/hd/samsung_hd1 /boot ext2 noauto,noatime 1 2
11 /dev/hd/samsung_hd2 none swap sw 0 0
12 /dev/hd/samsung_hd3 / reiserfs noatime 0 1
13 /dev/hd/maxtor_hd6 /mnt/store ext2 noatime 0 0
14 /dev/fd0 /mnt/floppy auto noauto,user 0 0
15 # NOTE: The next line is critical for boot!
16 none /proc proc defaults 0 0
17 # glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
18 # POSIX shared memory (shm_open, shm_unlink).
19 # (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
20 # use almost no memory if not populated with files)
21 # Adding the following line to /etc/fstab should take care of this:
22 none /dev/shm tmpfs nodev,nosuid,noexec 0 0
23 none /proc/bus/usb usbfs defaults 0 0 |
But I wonder why the symlinks like /dev/sda3 are not created any longer. Does someone know why? |
|
| Back to top |
|
|
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Mon Feb 22, 2010 9:15 pm Post subject: |
|
|
| Perhaps it's because you're changing NAME (which you should do - udev upstream discourages that). |
|
| Back to top |
|
|
samo
Guru
Joined: 13 Mar 2004
Posts: 489
|
| Posted: Mon Feb 22, 2010 9:24 pm Post subject: |
|
|
| No, I didn't change. Maybe I'm wrong, but from my understanding SYMLINK+="%k" should created e.g. a link /dev/sda3 to /dev/hd/samsung_hd3. |
|
| Back to top |
|
|
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Tue Feb 23, 2010 1:27 am Post subject: |
|
|
| Quote: | | NAME="hd/maxtor_hd%n", |
That looks like attempt to change NAME. |
|
| Back to top |
|
|
samo
Guru
Joined: 13 Mar 2004
Posts: 489
|
| Posted: Tue Feb 23, 2010 4:59 am Post subject: |
|
|
This works with udev-141. Maybe I have to read the udev documentation again.
At least I can boot now. Rest will follow. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
