PCTV HD Pro USB Stick issues

[Bitstream]

Trying to get a Pinnacle PCTV HD Pro USB Stick to work with kernel 2.6.30-gentoo-r5 and dmesg shows the following:

[39554.659823] usb usb2: usb resume
[39554.659832] ehci_hcd 0000:00:1d.7: resume root hub
[39554.679098] hub 2-0:1.0: hub_resume
[39554.679119] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[39554.679130] hub 2-0:1.0: port 1: status 0501 change 0001
[39554.780153] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000
[39554.780171] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[39554.831367] ehci_hcd 0000:00:1d.7: port 1 high speed
[39554.831379] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[39554.882101] usb 2-1: new high speed USB device using ehci_hcd and address 7
[39554.933369] ehci_hcd 0000:00:1d.7: port 1 high speed
[39554.933380] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[39554.996550] usb 2-1: default language 0x0409
[39555.004326] usb 2-1: New USB device found, idVendor=2304, idProduct=0227
[39555.004334] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[39555.004341] usb 2-1: Product: PCTV 800e
[39555.004345] usb 2-1: Manufacturer: Pinnacle Systems
[39555.004351] usb 2-1: SerialNumber: 070501960069
[39555.004498] usb 2-1: uevent
[39555.004535] usb 2-1: usb_probe_device
[39555.004542] usb 2-1: configuration #1 chosen from 1 choice
[39555.004709] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[39555.004756] usb 2-1:1.0: uevent
[39555.004829] em28xx 2-1:1.0: usb_probe_interface
[39555.004836] em28xx 2-1:1.0: usb_probe_interface - got id
[39555.004845] em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0)
[39555.004856] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17)
[39555.005040] em28xx #0: chip ID is em2882/em2883
[39555.006806] usb 2-1: uevent
[39555.147306] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c
[39555.147331] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[39555.147353] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00
[39555.147375] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[39555.147397] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[39555.147419] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[39555.147441] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[39555.147463] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[39555.147484] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[39555.147506] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00
[39555.147528] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 35 00 30 00
[39555.147550] em28xx #0: i2c eeprom b0: 31 00 39 00 36 00 30 00 30 00 36 00 39 00 00 00
[39555.147572] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[39555.147594] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[39555.147615] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[39555.147637] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[39555.147662] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x1fe5a8bf
[39555.147666] em28xx #0: EEPROM info:
[39555.147670] em28xx #0: AC97 audio (5 sample rates)
[39555.147674] em28xx #0: 500mA max power
[39555.147680] em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[39555.151246] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0)
[39555.156370] tuner 1-0061: chip found @ 0xc2 (em28xx #0)
[39555.156473] xc2028 1-0061: creating new instance
[39555.156479] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[39555.156494] i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
[39555.156511] ------------[ cut here ]------------
[39555.156524] WARNING: at fs/sysfs/dir.c:487 sysfs_add_one+0xcf/0xe6()
[39555.156529] Hardware name: 6459CTO
[39555.156533] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1d.7/usb2/2-1/i2c-adapter/i2c-1/i2c-1'
[39555.156539] Modules linked in: vmnet vmblock vmci vmmon lgdt330x em28xx_dvb em28xx_alsa nvidia(P) snd_hda_codec_analog tuner tvp5150 iwl3945 sdhci_pci sdhci snd_hda_intel snd_hda_codec em28xx ir_common thinkpad_acpi videobuf_vmalloc videobuf_core tveeprom snd_hwdep
[39555.156585] Pid: 377, comm: khubd Tainted: P W 2.6.30-gentoo-r5 #6
[39555.156590] Call Trace:
[39555.156601] [<ffffffff81109240>] ? sysfs_add_one+0xcf/0xe6
[39555.156612] [<ffffffff81038c6b>] warn_slowpath_common+0x77/0xa4
[39555.156621] [<ffffffff81038d0d>] warn_slowpath_fmt+0x64/0x66
[39555.156629] [<ffffffff81109169>] ? sysfs_pathname+0x37/0x3f
[39555.156637] [<ffffffff81109169>] ? sysfs_pathname+0x37/0x3f
[39555.156645] [<ffffffff81109169>] ? sysfs_pathname+0x37/0x3f
[39555.156654] [<ffffffff81109169>] ? sysfs_pathname+0x37/0x3f
[39555.156661] [<ffffffff81109240>] sysfs_add_one+0xcf/0xe6
[39555.156670] [<ffffffff811097e6>] create_dir+0x58/0x87
[39555.156678] [<ffffffff8110984d>] sysfs_create_dir+0x38/0x4f
[39555.156689] [<ffffffff811fcb46>] ? kobject_get+0x1a/0x22
[39555.156697] [<ffffffff811fcc8b>] kobject_add_internal+0xd5/0x195
[39555.156706] [<ffffffff811fce23>] kobject_add_varg+0x41/0x4e
[39555.156714] [<ffffffff811fcf35>] kobject_add+0x89/0x8b
[39555.156725] [<ffffffff812b5441>] ? kzalloc+0xf/0x11
[39555.156735] [<ffffffff810b597f>] ? __kmalloc+0x10d/0x11f
[39555.156743] [<ffffffff812b5441>] ? kzalloc+0xf/0x11
[39555.156751] [<ffffffff811fcb46>] ? kobject_get+0x1a/0x22
[39555.156759] [<ffffffff812b5e05>] device_add+0xea/0x552
[39555.156767] [<ffffffff811fc968>] ? kobject_init+0x43/0x83
[39555.156776] [<ffffffff812b6286>] device_register+0x19/0x1e
[39555.156785] [<ffffffff812bcf2f>] _request_firmware+0x1f9/0x3e3
[39555.156794] [<ffffffff812bd1a4>] request_firmware+0xe/0x12
[39555.156805] [<ffffffff813cbeb5>] generic_set_freq+0x243/0x13fb
[39555.156814] [<ffffffff8105afdf>] ? each_symbol+0x48/0x17f
[39555.156826] [<ffffffff8155cf31>] ? printk+0x67/0x69
[39555.156835] [<ffffffff810b597f>] ? __kmalloc+0x10d/0x11f
[39555.156843] [<ffffffff813cbc70>] ? kzalloc+0xf/0x11
[39555.156852] [<ffffffff813cd4d4>] ? xc2028_set_config+0xc9/0xec
[39555.156861] [<ffffffff813cd224>] xc2028_set_analog_freq+0x1b7/0x1c0
[39555.156876] [<ffffffffa00953e8>] fe_set_params+0x46/0x48 [tuner]
[39555.156888] [<ffffffffa0094401>] set_freq+0x23b/0x284 [tuner]
[39555.156898] [<ffffffff810992a8>] ? kstrdup+0x2f/0x4b
[39555.156910] [<ffffffffa0094b06>] tuner_s_frequency+0x87/0x92 [tuner]
[39555.156933] [<ffffffffa0040bff>] em28xx_card_setup+0x79b/0x7c3 [em28xx]
[39555.156942] [<ffffffff813c7c3d>] ? i2c_master_recv+0x3c/0x4b
[39555.156963] [<ffffffffa0040c27>] ? em28xx_tuner_callback+0x0/0x23 [em28xx]
[39555.156983] [<ffffffffa00417a0>] em28xx_usb_probe+0x5b9/0x781 [em28xx]
[39555.156997] [<ffffffff8138fd61>] usb_probe_interface+0x167/0x1c0
[39555.157036] [<ffffffff812b7f1d>] driver_probe_device+0x97/0x13c
[39555.157045] [<ffffffff812b803d>] ? __device_attach+0x0/0x3c
[39555.157053] [<ffffffff812b8070>] __device_attach+0x33/0x3c
[39555.157062] [<ffffffff812b7553>] bus_for_each_drv+0x51/0x88
[39555.157071] [<ffffffff812b80fb>] device_attach+0x5e/0x73
[39555.157080] [<ffffffff812b73ba>] bus_attach_device+0x25/0x57
[39555.157090] [<ffffffff812b60e4>] device_add+0x3c9/0x552
[39555.157101] [<ffffffff810b37e5>] ? virt_to_head_page+0x9/0x2a
[39555.157112] [<ffffffff8138e8e4>] usb_set_configuration+0x5a8/0x615
[39555.157123] [<ffffffff81396736>] generic_probe+0x56/0xa0
[39555.157133] [<ffffffff8138f099>] usb_probe_device+0x67/0x70
[39555.157144] [<ffffffff812b7f1d>] driver_probe_device+0x97/0x13c
[39555.157154] [<ffffffff812b803d>] ? __device_attach+0x0/0x3c
[39555.157164] [<ffffffff812b8070>] __device_attach+0x33/0x3c
[39555.157173] [<ffffffff812b7553>] bus_for_each_drv+0x51/0x88
[39555.157183] [<ffffffff812b80fb>] device_attach+0x5e/0x73
[39555.157193] [<ffffffff812b73ba>] bus_attach_device+0x25/0x57
[39555.157203] [<ffffffff812b60e4>] device_add+0x3c9/0x552
[39555.157213] [<ffffffff81387976>] usb_new_device+0x130/0x192
[39555.157223] [<ffffffff813896b6>] hub_thread+0xd9d/0x13d3
[39555.157236] [<ffffffff8104bbb4>] ? autoremove_wake_function+0x0/0x38
[39555.157246] [<ffffffff81388919>] ? hub_thread+0x0/0x13d3
[39555.157254] [<ffffffff81388919>] ? hub_thread+0x0/0x13d3
[39555.157262] [<ffffffff8104b7c6>] kthread+0x56/0x83
[39555.157272] [<ffffffff8100cafa>] child_rip+0xa/0x20
[39555.157282] [<ffffffff8104b770>] ? kthread+0x0/0x83
[39555.157291] [<ffffffff8100caf0>] ? child_rip+0x0/0x20
[39555.157297] ---[ end trace fe3d381734f38054 ]---
[39555.157307] kobject_add_internal failed for i2c-1 with -EEXIST, don't try to register things with the same name in the same directory.
[39555.157317] Pid: 377, comm: khubd Tainted: P W 2.6.30-gentoo-r5 #6
[39555.157322] Call Trace:
[39555.157331] [<ffffffff811fca25>] ? kobject_put+0x47/0x4b
[39555.157342] [<ffffffff811fcd32>] kobject_add_internal+0x17c/0x195
[39555.157352] [<ffffffff811fce23>] kobject_add_varg+0x41/0x4e
[39555.157361] [<ffffffff811fcf35>] kobject_add+0x89/0x8b
[39555.157370] [<ffffffff812b5441>] ? kzalloc+0xf/0x11
[39555.157381] [<ffffffff810b597f>] ? __kmalloc+0x10d/0x11f
[39555.157390] [<ffffffff812b5441>] ? kzalloc+0xf/0x11
[39555.157399] [<ffffffff811fcb46>] ? kobject_get+0x1a/0x22
[39555.157409] [<ffffffff812b5e05>] device_add+0xea/0x552
[39555.157418] [<ffffffff811fc968>] ? kobject_init+0x43/0x83
[39555.157428] [<ffffffff812b6286>] device_register+0x19/0x1e
[39555.157438] [<ffffffff812bcf2f>] _request_firmware+0x1f9/0x3e3
[39555.157448] [<ffffffff812bd1a4>] request_firmware+0xe/0x12
[39555.157458] [<ffffffff813cbeb5>] generic_set_freq+0x243/0x13fb
[39555.157468] [<ffffffff8105afdf>] ? each_symbol+0x48/0x17f
[39555.157479] [<ffffffff8155cf31>] ? printk+0x67/0x69
[39555.157489] [<ffffffff810b597f>] ? __kmalloc+0x10d/0x11f
[39555.157499] [<ffffffff813cbc70>] ? kzalloc+0xf/0x11
[39555.157509] [<ffffffff813cd4d4>] ? xc2028_set_config+0xc9/0xec
[39555.157520] [<ffffffff813cd224>] xc2028_set_analog_freq+0x1b7/0x1c0
[39555.157534] [<ffffffffa00953e8>] fe_set_params+0x46/0x48 [tuner]
[39555.157547] [<ffffffffa0094401>] set_freq+0x23b/0x284 [tuner]
[39555.157557] [<ffffffff810992a8>] ? kstrdup+0x2f/0x4b
[39555.157570] [<ffffffffa0094b06>] tuner_s_frequency+0x87/0x92 [tuner]
[39555.157592] [<ffffffffa0040bff>] em28xx_card_setup+0x79b/0x7c3 [em28xx]
[39555.157603] [<ffffffff813c7c3d>] ? i2c_master_recv+0x3c/0x4b
[39555.157625] [<ffffffffa0040c27>] ? em28xx_tuner_callback+0x0/0x23 [em28xx]
[39555.157646] [<ffffffffa00417a0>] em28xx_usb_probe+0x5b9/0x781 [em28xx]
[39555.157660] [<ffffffff8138fd61>] usb_probe_interface+0x167/0x1c0
[39555.157672] [<ffffffff812b7f1d>] driver_probe_device+0x97/0x13c
[39555.157682] [<ffffffff812b803d>] ? __device_attach+0x0/0x3c
[39555.157692] [<ffffffff812b8070>] __device_attach+0x33/0x3c
[39555.157702] [<ffffffff812b7553>] bus_for_each_drv+0x51/0x88
[39555.157712] [<ffffffff812b80fb>] device_attach+0x5e/0x73
[39555.157722] [<ffffffff812b73ba>] bus_attach_device+0x25/0x57
[39555.157732] [<ffffffff812b60e4>] device_add+0x3c9/0x552
[39555.157742] [<ffffffff810b37e5>] ? virt_to_head_page+0x9/0x2a
[39555.157753] [<ffffffff8138e8e4>] usb_set_configuration+0x5a8/0x615
[39555.157764] [<ffffffff81396736>] generic_probe+0x56/0xa0
[39555.157774] [<ffffffff8138f099>] usb_probe_device+0x67/0x70
[39555.157784] [<ffffffff812b7f1d>] driver_probe_device+0x97/0x13c
[39555.157794] [<ffffffff812b803d>] ? __device_attach+0x0/0x3c
[39555.157804] [<ffffffff812b8070>] __device_attach+0x33/0x3c
[39555.157814] [<ffffffff812b7553>] bus_for_each_drv+0x51/0x88
[39555.157824] [<ffffffff812b80fb>] device_attach+0x5e/0x73
[39555.157834] [<ffffffff812b73ba>] bus_attach_device+0x25/0x57
[39555.157843] [<ffffffff812b60e4>] device_add+0x3c9/0x552
[39555.157853] [<ffffffff81387976>] usb_new_device+0x130/0x192
[39555.157863] [<ffffffff813896b6>] hub_thread+0xd9d/0x13d3
[39555.157875] [<ffffffff8104bbb4>] ? autoremove_wake_function+0x0/0x38
[39555.157884] [<ffffffff81388919>] ? hub_thread+0x0/0x13d3
[39555.157893] [<ffffffff81388919>] ? hub_thread+0x0/0x13d3
[39555.157903] [<ffffffff8104b7c6>] kthread+0x56/0x83
[39555.157912] [<ffffffff8100cafa>] child_rip+0xa/0x20
[39555.157922] [<ffffffff8104b770>] ? kthread+0x0/0x83
[39555.157930] [<ffffffff8100caf0>] ? child_rip+0x0/0x20
[39555.157938] i2c-adapter i2c-1: fw_register_device: device_register failed
[39555.157946] xc2028 1-0061: Error -17 while requesting firmware xc3028-v27.fw
[39555.158137] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/input/input14
[39555.158842] em28xx #0: Config register raw data: 0xd0
[39555.159664] em28xx #0: AC97 vendor ID = 0xffffffff
[39555.160051] em28xx #0: AC97 features = 0x6a90
[39555.160055] em28xx #0: Empia 202 AC97 audio processor detected
[39555.167798] usb 2-1: uevent
[39555.167838] usb usb2: uevent
[39555.168657] usb 2-1: uevent
[39555.168685] usb usb2: uevent
[39555.251552] tvp5150 1-005c: tvp5150am1 detected.
[39555.344919] em28xx #0: v4l2 driver version 0.1.2
[39555.405120] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[39555.405128] em28xx-audio.c: probing for em28x1 non standard usbaudio
[39555.405132] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[39555.418315] usb 2-1: uevent
[39555.418433] usb usb2: uevent
[39555.420582] usb 2-1: uevent
[39555.420666] usb usb2: uevent
[39555.448814] xc2028 1-0061: attaching existing instance
[39555.448817] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[39555.448819] em28xx #0/2: xc3028 attached
[39555.448821] DVB: registering new adapter (em28xx #0)
[39555.448824] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[39555.449114] Successfully loaded em28xx-dvb
[39555.461180] drivers/usb/core/inode.c: creating file '007'
[39555.540558] tvp5150 1-005c: tvp5150am1 detected.


Any ideas why it thinks it is trying to create duplicate files? Thanks!

[asgentoo]

In case anyone googles this issue, there is a bug in (at least) 2.6.30 that is corrected in (at least) 2.6.32

The bug is: