Gentoo Forums :: View topic - X server wont start, or starts(?),but does naught [updated].

X server wont start, or starts(?),but does naught [updated].

View unanswered posts
View posts from last 24 hours

Goto page 1, 2 Next

Gentoo Forums Forum Index

Kernel & Hardware

View previous topic :: View next topic

Author

Message

Chiitoo
Administrator

Joined: 28 Feb 2010
Posts: 2754
Location: Here and Away Again

Posted: Sun Feb 28, 2010 7:14 pm Post subject: X server wont start, or starts(?),but does naught [updated].

Quote:

Edit:
I see it was cut short.
I shall get only the needed parts up but right now, I don't have the time to do so.
So I'll look into it later / another day but yeah, until then~

Edit 0.1:
I thought I changed to the Desktop Environments to post this on as it seemed a bit more like it but ehh, seems I didn't. :S
Well, it is here now!

Edit 1.0:
Okay, cleaned up the post a little and added info, with a video even!

--=+ Prelude +=--

First of all, I am sorry if the answer lies in one or more of the several similar threads but I've been going thru a LOT of them, tried a LOT of things and frankly, my head is not too pleased so I'm gonna take an advantage of this board as should be, I reckon. ^^

So, I'm a beginner Linux user, THE Noob Unlimited.
Only Linux previously used is Ubuntu and not much of that either so for example the shell is rather new to me though it does take me back to when I got my first PC with some M$D** diskettes hehe...
Somehow, I managed to get everything up and running, even a KDE desktop, on another computer! Most certainly all thanks to the great hand-book and the other guides so a big thank you for your efforts is in place for everyone who are putting their time into it all, for free even, as it speeds up the process of getting in to something a lot, for a beginner.

Really, thank you.

--=+ startx +=--

So yeah, my first try on another computer, a bit older one, went rather smooth except for the graphics card drivers which I could not get running. More specifically, the 173.14.25 (from nVidia), and 173.14.22 (from Portage), whereas the 96.43.16 version DOES work. Details about that problem can be found here, at the nVnews board, if anyone is interested enough to look into that as well. ^^;

So after that, I decided to try on my main computer as well and everything went pretty much the same way, except just faster. /grin
Until the point where I was installing, or trying to install, KDE-4.
Had a lot of problems with circular dependencies but managed to get it installed and so forth.

However, when I start X, the screen goes blank for a while, and then gives me the usual output you would get when it has nothing to run (I imagine). After trying the driver package from nVidia and Portage separately several times, with Xorg -config and nVidia-config, not much seemed to change. I did notice that it was not able to find modules for the mouse and keyboard and realized I had forgotten to put the hal USE flag up. >.<

Either way, I got that sorted so now it really does seem like as if it starts but has nothing to do? No errors that I should be conserned of as far as I know, and KDE should be ready to be used.
I'm thinking I've missed something obvious or doing something obviously wrong I should know of by now but alas, I'm getting tired.
So I would really appreciate any pointers on what to try and so forth. ^^

Hmm, seems there is no option to attach files here, so I shall paste the nvidia-bug-report here, like it or not. D:
Could take it to "pastebin" I guess but well, here it is.
I did remove tons of resolution tests and such so it could be worse. ^^;

I can edit it later or something but for the time being, I'll stuff it here.
I hope that's OK.

Thank you in advance!

Kind Regards,
sh logspam.now

Code:

2.6.31-gentoo-r6 x86_64 AMD Athlon(tm) 7750 Dual-Core Processor AuthenticAMD GNU/Linux

Gentoo Base System release 1.12.13

installer version: 1.0.7

option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
precompiled interfaces : true
no ncurses color : false
query latest version : false
OpenGL header files : true
no questions : false
silent : false
no recursion : false
no backup : false
kernel module only : false
sanity : false
add this kernel : false
no runlevel check : false
no network : false
no ABI note : false
no RPMs : false
no kernel module : false
force SELinux : default
no X server check : false
no cc version check : false
force tls : (not specified)
force compat32 tls : (not specified)
X install prefix : (not specified)
X library install path : (not specified)
X module install path : (not specified)
OpenGL install prefix : (not specified)
OpenGL install libdir : (not specified)
compat32 install chroot : (not specified)
compat32 install prefix : (not specified)
compat32 install libdir : (not specified)
utility install prefix : (not specified)
utility install libdir : (not specified)
doc install prefix : (not specified)
kernel name : (not specified)
kernel include path : (not specified)
kernel source path : (not specified)
kernel output path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp
ftp mirror : ftp://download.nvidia.com
RPM file list : (not specified)

This part from the driver installation seems a bit funky. Hoe does this affect to things and is it essential to do what it tells me to do to fix it?

Code:

test -e include/linux/autoconf.h -a -e include/config/auto.conf || (    \
   echo;                      \
   echo " ERROR: Kernel configuration is invalid.";    \
   echo " include/linux/autoconf.h or include/config/auto.conf are mis
sing."; \
   echo " Run 'make oldconfig && make prepare' on kernel src to fix it
."; \
   echo;                      \

xorg.conf

Code:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Dec 9 16:34:26 PST 2009

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection

Section "Module"

# Load "dri2"
Load "record"
Load "extmod"
Load "glx"
Load "dbe"
# Load "dri"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G92 [GeForce 8800 GT]"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection

Xorg.0.log with resolution etc. tests removed.

Code:

I will include make.conf as well as dmesg and other things if needed, when I can.

Here is a video at Youtube of what happens sometimes during the black screen activity.
Other times, there is nothing visible until the end, or the screen may just stay black and the system will become unresponsive requiring me to do a "hard-reset" via the reset or power switch of the computer...

I think that's it for now.
Thanks. ^^
_________________
Kindest of regardses.

Last edited by Chiitoo on Sun Feb 28, 2010 8:52 pm; edited 1 time in total

NeddySeagoon
Administrator

Joined: 05 Jul 2003
Posts: 54848
Location: 56N 3W

Posted: Sun Feb 28, 2010 8:28 pm Post subject:

Chiitoo,

Welcome to Gentoo.

The first rule of building a stable gentoo system is build on what you have and do it in such a way that you can back out changes when it breaks.
That way you can always go back to a working system.

Please don't use the drivers from the nVidia site directly. Portage often patches the 'shim' code that is the glue between the binary blob and the outside world. You won't get these patches unless you use emerge nvidia-drivers.

The build log is not very useful for debugging unless you have a build problem, which is not the case here. The file /var/log/Xorg.0.log is what we need to see - all of it, there should be much more than what you posted. Please post it in line between code tags, so the formatting is preserved. We prefer that over pastebin as your file is preserved for others to learn from, pastebins tend to evaporate quite quickly.

In line with rule 1, please rename your xorg.config to xorg.config.nvida then

Code:

emerge -1 xf86-video-nv

and start Xorg with no configure file at all. It should just work.
If you want to keep the nv driver up to date as a fallback, which is a good idea anyway, add it to your VIDEO_CARDS setting in /etc/make.conf

When X works with nv, its time to move up to nVidia.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.

Chiitoo
Administrator

Joined: 28 Feb 2010
Posts: 2754
Location: Here and Away Again

Posted: Sun Feb 28, 2010 9:05 pm Post subject:

Thank you! And yes, I know that the post was not good. I figured it has Xorg.0.log etc. "merged" so it seemed like a good idea while I was in haste. Should never do things like that heh. The closing code marker was cut off due to the length so yeah, that was messy. D; Anyways, should be a bit better now. I tried the drivers via portage first but it just wouldn't work (might've been due to the hal thingy? ~facepalm~), and I tried without the xorg.conf as well etc. but it wouldn't work either. I don't actually remember if I tried the drivers via Portage after I rebuilt stuff so I gotta try that indeed... Thanks again for the swift reply. ^^ _________________ Kindest of regardses.

NeddySeagoon
Administrator

Joined: 05 Jul 2003
Posts: 54848
Location: 56N 3W

Posted: Sun Feb 28, 2010 9:14 pm Post subject:

Chiitoo, Do what I asked first. How are you starting Xorg? with startx or X ? The former runs the default xinitrc, which uses twm to draw three xterms and a clock - you will get error messages about twm, xterm and xclock missing is you don't have them. The latter runs X and waits for you to tell it what to do. Ctlr-Alt-Backspace should kill Xorg regardless. _________________ Regards, NeddySeagoon Computer users fall into two groups:- those that do backups those that have never had a hard drive fail.

Chiitoo
Administrator

Joined: 28 Feb 2010
Posts: 2754
Location: Here and Away Again

Posted: Sun Feb 28, 2010 9:25 pm Post subject:

Yeah, starting with startx as it was how it would start KDE on the other machine I got it up and running the first time. Don't really know what went wrong since I did everything pretty much the same way. I was assuming something like that indeed. That I don't have the things it would run as default but like I said, I did everything like before, I think, so why is it not starting the XSESSION="KDE-4" like before? And no, even after adding the cltr-alt-backspace command it wont take it if/when it locks up. :S Either way, looking into it further will probably need to wait until tomorrow or so as it is this same computer we're dealing with (dual-booting XP) and I've got some stuff to do. ^^; Quite anxious on seeing how I will be able to run the apps I casually use as it would be quite nice to be able to ditch the windows for good as I don't really need many things anyways. Thanks again! Bear with me for a bit, I am learning. ^^; _________________ Kindest of regardses.

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Sun Feb 28, 2010 11:31 pm Post subject:

Hi i seem to be having the same problem.
Im not able to start X.
I have a brand new build portage is up to date.

When i try to start x there are no screens found.

When i run

Code:

Xorg -configure

It seems to start to load but then freezes.
. Im not able to control alt backspace it dose not work.

I have emerged nvidia-drivers
and have the line VIDEO_CARDS="nvidia" in my make.conf

I have only just started using gentoo again.
And X seems to have changed ab bit.

I have noticed xorgcfg has also gone.

Can anyone help ?

whiteghost
Guru
Guru

Joined: 26 Jul 2009
Posts: 374
Location: north dakota

Posted: Mon Mar 01, 2010 12:22 am Post subject:

gentoo_newguy wrote

Quote:

When i run
Code:
Xorg -configure

try

Code:

nvidia-xconfig

_________________
www.informationclearinghouse.info
May you re-discover what the poor in 18th century France discovered, that rich people's heads can be mechanically separated from their shoulders if they refuse to listen to reason.

cach0rr0
Bodhisattva

Joined: 13 Nov 2008
Posts: 4123
Location: Houston, Republic of Texas

Posted: Mon Mar 01, 2010 12:37 am Post subject:

gentoo_newguy wrote:

Hi i seem to be having the same problem.
Im not able to start X.
I have a brand new build portage is up to date.

When i try to start x there are no screens found.

When i run

Code:

Xorg -configure

It seems to start to load but then freezes.
. Im not able to control alt backspace it dose not work.

IIRC, doesn't the nvidia-drivers package include a utility for generating an xorg.conf file?

ALSO: ctrl+alt+backspace is disabled by default in X now.

You can either do your X tests with the -retro switch, or hit ALT+SysRq+K to kill X.
_________________
Lost configuring your system?
dump lspci -n here | see Pappy's guide | Link Stash

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Mon Mar 01, 2010 12:32 pm Post subject:

Thank you so much for your reply. Im still having problems. Although using the tool does not freeze my stem. Where is log file stored for when i try and start x so i can upload ? I think when i tried to emerge x and gnome it may have missed a few packages. I have tried running revdep-rebuild but nothing is missing. I have also just emerged xterm and it now loads x but im still missing packages. Is there away to complety reinstall all paclages required for gnome-light and xorg-server ?

NeddySeagoon
Administrator

Joined: 05 Jul 2003
Posts: 54848
Location: 56N 3W

Posted: Mon Mar 01, 2010 10:41 pm Post subject:

gentoo_newguy, Until Xorg works, gnome cannot start as gnome uses Xorg. So lets look at your Xorg log. Its at /var/log/Xorg.0.log please post it all. The log tells what Xorg did when it started. _________________ Regards, NeddySeagoon Computer users fall into two groups:- those that do backups those that have never had a hard drive fail.

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Mon Mar 01, 2010 11:01 pm Post subject:

Neddy My X is starting now after i emerged xterm. What im saying is im defiantly missing packages. revdep-rebuild did not pick up that xterm and the clock were missing. I emerged them and the desktop loaded. now when i start x i get the 3 screens and the little clock in the corner. My mouse and keyboard do not work when X starts. Also i have my session set to gnome in the rc.conf and i have also done echo "exec gnome-session" > ~/.xinitrc My gnome desktop does not load. Im so out of touch with Gentoo. Everything seems to have changed

whiteghost
Guru
Guru

Joined: 26 Jul 2009
Posts: 374
Location: north dakota

Posted: Mon Mar 01, 2010 11:43 pm Post subject:

gentoo_newguy wrote:

Neddy My X is starting now after i emerged xterm.
What im saying is im defiantly missing packages.
revdep-rebuild did not pick up that xterm and the clock were missing.
I emerged them and the desktop loaded.

now when i start x i get the 3 screens and the little clock in the corner.
My mouse and keyboard do not work when X starts.

Also i have my session set to gnome in the rc.conf
and i have also done

echo "exec gnome-session" > ~/.xinitrc

My gnome desktop does not load.

Im so out of touch with Gentoo.
Everything seems to have changed

xterm and the clock are not installed default anymore.
when using nvidia-drivers configure X using:

Code:

nvidia-xconfig

gnome-light is not a full gnome so you will have to install some more things.
do you have in your make.conf

Code:

INPUT_DEVICES="evdev"

Code:

emerge gdm -pv

to see if gnome displaymanager is installed.
if not install it.

Code:

nano -w /etc/conf.d/xdm

edit

Code:

CHECKVT=7
DISPLAYMANAGER="gdm"
NEEDS_HALD="auto"

Code:

rc-update add dbus default
rc-update add hald default
rc-update add consolekit default

emerge world -uDNpv
emerge world -uDN
restart, login as root, and type

Code:

gdm

hopefully you'll be in gnomeland.

this is not the only way to start gnome. it is the way i do it.
_________________
www.informationclearinghouse.info
May you re-discover what the poor in 18th century France discovered, that rich people's heads can be mechanically separated from their shoulders if they refuse to listen to reason.

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Mon Mar 01, 2010 11:46 pm Post subject:

hey man thanks for ur reply. I will try all this now. Never had problems before emerging gnome-light I do not have this in my conf I also dont have this in my make.conf laptop. INPUT_DEVICES="evdev" What is this ? Also i like to startx from the command line. Do i have to install the display manager ? Thank u so much for your help

Chiitoo
Administrator

Joined: 28 Feb 2010
Posts: 2754
Location: Here and Away Again

Posted: Mon Mar 01, 2010 11:54 pm Post subject:

gentoo_newguy

Do you have hal up and running?
The no-keyboard&mouse thing made me think of that...
Oh, someone just posted now before me, oh well.

Updates on my problem.
I tried again going with the xf86-video-nv drivers but the results are more or less the same.

Code:

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r6 x86_64
Current Operating System: Linux Commodorel 2.6.31-gentoo-r6 #1 SMP Sun Feb 28 00:04:26 EET 2010 x86_64
Build Date: 28 February 2010 05:38:50PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 1 11:02:24 2010
(II) Loader magic: 0xd20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI: (0:0:1:3) 10de:0753:1019:2646 nVidia Corporation MCP78S [GeForce 8200] Co-Processor rev 162, Mem @ 0xf3f80000/524288
(--) PCI:*(0:2:0:0) 10de:0611:1682:2333 nVidia Corporation G92 [GeForce 8800 GT] rev 162, Mem @ 0xfc000000/16777216, 0xc0000000/536870912, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
   Identifier "Builtin Default nv Device 0"
   Driver "nv"
EndSection
Section "Screen"
   Identifier "Builtin Default nv Screen 0"
   Device "Builtin Default nv Device 0"
EndSection
Section "Device"
   Identifier "Builtin Default vesa Device 0"
   Driver "vesa"
EndSection
Section "Screen"
   Identifier "Builtin Default vesa Screen 0"
   Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
   Identifier "Builtin Default fbdev Device 0"
   Driver "fbdev"
EndSection
Section "Screen"
   Identifier "Builtin Default fbdev Screen 0"
   Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
   Identifier "Builtin Default Layout"
   Screen "Builtin Default nv Screen 0"
   Screen "Builtin Default vesa Screen 0"
   Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default nv Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default nv Device 0"
(==) No monitor specified for screen "Builtin Default nv Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi/" does not exist.
Entry deleted from font path.
(==) FontPath set to:

(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(WW) Warning, couldn't open module glx
(II) UnloadModule: "glx"
(EE) Failed to load module "glx" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/lib64/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.1.16
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 8800 GTX, GeForce 8800 GTS,
GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
GeForce GTX 295, GeForce GTX 280, GeForce GTX 260, GeForce GTX 285,
GeForce GTX 275, GeForce GTX 295, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce 9800 GX2, GeForce 9800 GT,
GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce 9600 GSO,
GeForce 8800 GT, GeForce 9800 GTX, GeForce 9800 GTX+,
GeForce 9800 GT, GeForce GTS 250, GeForce 9800M GTX,
GeForce GTX 260M, Quadro FX 3700, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce GT 120,
GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce GT 130M,
GeForce 9500 GT, Quadro FX 380, Quadro FX 580, Quadro FX 1700M,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400 GS,
GeForce 9300M GS, GeForce G100, GeForce 9200M GS, GeForce 9300M GS,
Quadro NVS 150M, Quadro NVS 160M, GeForce G 105M, GeForce G 103M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro NVS 295,
GeForce GT 220, GeForce 210, GeForce GT 230M, GeForce GT 240M,
GeForce G210, GeForce 205, GeForce 310, GeForce 210, GeForce 310,
GeForce G210M, Quadro FX 380 LP, GeForce GT 240, GeForce GTS 260M,
GeForce GTS 250M
(II) Primary Device is: PCI 02@00:00:0
(--) NV: Found NVIDIA GeForce 8800 GT at 02@00:00:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Console is VGA mode 0x169
(II) NV(0): Creating default Display subsection in Screen section
"Builtin Default nv Screen 0" for depth/fbbpp 24/32
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0x7fe086c48000
(WW) NV(0): BAR1 is > 256 MB, which is probably wrong. Clamping to 256 MB.
(--) NV(0): Total video RAM: 512.0 MB
(--) NV(0): BAR1 size: 256.0 MB
(--) NV(0): Mapped memory: 256.0 MB
(II) NV(0): Linear framebuffer mapped at 0x7fe076c48000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) NV(0): Connector map:
(--) NV(0): Bus 0 -> DAC1
(--) NV(0): Bus 0 -> SOR0
(--) NV(0): Bus 1 -> DAC2
(--) NV(0): Bus 1 -> SOR1
(--) NV(0): Load detection: 312
(II) NV(0): I2C bus "I2C0" initialized.
(II) NV(0): Output VGA1 has no monitor section
(II) NV(0): Output DVI0 has no monitor section
(II) NV(0): I2C bus "I2C1" initialized.
(II) NV(0): Output VGA2 has no monitor section
(II) NV(0): Output DVI1 has no monitor section
(II) NV(0): Probing for EDID on I2C bus 0...
(II) NV(0): I2C device "I2C0:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: GSM Model: 566b Serial#: 63136
(II) NV(0): Year: 2007 Week: 6
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 49 vert.: 32
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
(II) NV(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x870@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) NV(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NV(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) NV(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 146.2 MHz Image Size: 474 x 296 mm
(II) NV(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 kHz, PixClock max 150 MHz
(II) NV(0): Monitor name: L226W
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff001e6d6b56a0f60000
(II) NV(0): 06110103ea312078eaaec5a2574a9c25
(II) NV(0): 125054a76b80950081808140714f0101
(II) NV(0): 0101010101017c2e90a0601a1e403020
(II) NV(0): 3600da281100001a21399030621a2740
(II) NV(0): 68b03600da281100001c000000fd0038
(II) NV(0): 4b1c530f000a202020202020000000fc
(II) NV(0): 004c32323657200a20202020202000c4
(--) NV(0): Trying load detection on VGA1 ... nothing.
(II) NV(0): EDID vendor "GSM", prod id 22123
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): I2C device "I2C1:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(--) NV(0): Trying load detection on VGA2 ... nothing.
(II) NV(0): Output VGA1 disconnected
(II) NV(0): Output DVI0 connected
(II) NV(0): Output VGA2 disconnected
(II) NV(0): Output DVI1 disconnected
(II) NV(0): Using exact sizes for initial modes
(II) NV(0): Output DVI0 using initial mode 1680x1050
(--) NV(0): Virtual size is 1680x1680 (pitch 1792)
(**) NV(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
(II) NV(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(**) NV(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) NV(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(**) NV(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NV(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NV(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
(II) NV(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(**) NV(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NV(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NV(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NV(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(**) NV(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NV(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NV(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NV(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NV(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(==) NV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(--) NV(0): 212.51 MB available for offscreen pixmaps
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
   32 128x128 slots
   32 256x256 slots
   16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): DPMS enabled
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) NV(0): Setting screen physical size to 474 x 296
(II) config/hal: Adding input device Power Button
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device G15 Keyboard G15 Keyboard
(**) G15 Keyboard G15 Keyboard: always reports core events
(**) G15 Keyboard G15 Keyboard: Device: "/dev/input/event4"
(II) G15 Keyboard G15 Keyboard: Found keys
(II) G15 Keyboard G15 Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "G15 Keyboard G15 Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Gaming Keyboard
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event3"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Gaming Keyboard
(**) Gaming Keyboard: always reports core events
(**) Gaming Keyboard: Device: "/dev/input/event2"
(II) Gaming Keyboard: Found keys
(II) Gaming Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) G15 Keyboard G15 Keyboard: Close
(II) UnloadModule: "evdev"
(II) Gaming Keyboard: Close
(II) UnloadModule: "evdev"
(II) Gaming Keyboard: Close
(II) UnloadModule: "evdev"
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"

(EE) Failed to load module "glx" (module does not exist, 0)

This, and one other, can't remember which, was fixed by re-emerging xorg-server.
Also, here my most current make.conf, as simple as it is. I'm have a feeling I've completely forgotten to use some crucial USE flags or something...

Code:

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.

CFLAGS="-march=amdfam10 -O2 -pipe"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j3"
USE="mmx sse sse2 kde nvidia gtk X -ipv6 nvidia hal"

# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.

CHOST="x86_64-pc-linux-gnu"

# These are the USE flags that were used in addition to what is provided by the
# profile used for building.

GENTOO_MIRRORS="ftp://trumpetti.atm.tut.fi/gentoo/ http://trumpetti.atm.tut.fi/gentoo/ "
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"

VIDEO_CARDS="nv nvidia vesa"
INPUT_DEVICES="evdev keyboard mouse"

Also something I forgot to mention about the lockups when sometimes commencing startx.
Sometimes, even after doing a "hard-reset" on the system, the screen would still be frozen and by frozen, I mean completely unresponsive to the extent that it would not turn off from the power switch, instead I had to unplug the power cord. O.o

Thanks! :]
_________________
Kindest of regardses.

Last edited by Chiitoo on Mon Mar 01, 2010 11:57 pm; edited 2 times in total

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Mon Mar 01, 2010 11:55 pm Post subject:

Hal is up and running my friend. Still no keyboard and mouse.

whiteghost
Guru
Guru

Joined: 26 Jul 2009
Posts: 374
Location: north dakota

Posted: Tue Mar 02, 2010 12:21 am Post subject:

x11-drivers/xf86-input-evdev x11-drivers/xf86-input-mouse x11-misc/xkeyboard-config x11-drivers/xf86-input-synaptics x11-drivers/xf86-input-keyboard check to see if you have these drivers. laptop may need synaptics _________________ www.informationclearinghouse.info May you re-discover what the poor in 18th century France discovered, that rich people's heads can be mechanically separated from their shoulders if they refuse to listen to reason.

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Tue Mar 02, 2010 12:43 am Post subject:

Laptop is running fine Its my pc that aint working. Cheers il check and get back to you.

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Tue Mar 02, 2010 3:16 am Post subject:

Ok very strange all the packages are installed. Rebooted my machine i can log into gnome. I have no nvidia splash screen and my mouse does not work still. Keyboard seems to be working . Also very strange problem my Applications on my gnome menu has nothing in it it does not drop down or anything the other on the menu are working fine. What is happening . I do not understand this is a fresh install ? Guys thanks for all your help im determined to make this work

whiteghost
Guru
Guru

Joined: 26 Jul 2009
Posts: 374
Location: north dakota

Posted: Tue Mar 02, 2010 5:11 am Post subject:

you have used gnome light before? i ended up installing almost every gnome package except evolution when i tried gnome light. usb mouse? please post lspci -k and /usr/src/linux/.config _________________ www.informationclearinghouse.info May you re-discover what the poor in 18th century France discovered, that rich people's heads can be mechanically separated from their shoulders if they refuse to listen to reason.

NeddySeagoon
Administrator

Joined: 05 Jul 2003
Posts: 54848
Location: 56N 3W

Posted: Tue Mar 02, 2010 12:29 pm Post subject:

Chiitoo,

Your log shows that Xorg started, found nothing to and quit.

It looks like you don't have a window manager for X to run. Try the following:-

Code:

emerge twm xclock xterm av

then startx again.
You should find that those packages are all flagged as [ N ] meaning New.

They are not installed by default any more as they are seldom used but they are good for testing.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Tue Mar 02, 2010 12:40 pm Post subject:

Guys thanks for your reply. Yeh i have gnome-light on to machines at home and my laptop . All working fine and all i had to was emerge gnome-light X alsa dbus hal everything works pretty smooth. But my new machine im still having trouble. Neddy X is starting now and im greeted with the gnome desktop just my Applications on the start menu h are missing. The mouse still does not work. Whiteghost i am using a usb mouse you are correct . .

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Tue Mar 02, 2010 12:47 pm Post subject:

Guys thanks for your reply.

Yeh i have gnome-light on to machines at home and my laptop .
All working fine and all i had to was emerge gnome-light X alsa dbus hal everything works pretty smooth. But my new machine im still having trouble.

Neddy X is starting now and im greeted with the gnome desktop just my Applications on the start menu has nothing in it.
Places and system are how they usually are.

The mouse still does not work.

Whiteghost i am using a usb mouse you are correct .

Code:

localhost ~ # lspci -k
00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge
Subsystem: ASRock Incorporation Device 0308
00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Device 1308
00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Device 2308
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
Subsystem: ASRock Incorporation Device 4308
00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller
Subsystem: ASRock Incorporation Device 5308
00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge Controller
Kernel driver in use: pcieport-driver
00:0f.0 IDE interface: VIA Technologies, Inc. Device 5372
Subsystem: ASRock Incorporation Device 5372
Kernel driver in use: sata_via
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard
Kernel driver in use: VIA_IDE
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0)
Subsystem: ASRock Incorporation K7VT6
Kernel driver in use: uhci_hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0)
Subsystem: ASRock Incorporation K7VT6
Kernel driver in use: uhci_hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0)
Subsystem: ASRock Incorporation K7VT6
Kernel driver in use: uhci_hcd
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0)
Subsystem: ASRock Incorporation K7VT6
Kernel driver in use: uhci_hcd
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
Subsystem: ASRock Incorporation K7VT6 motherboard
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237S PCI to ISA Bridge
Subsystem: ASRock Incorporation Device 3372
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
Subsystem: VIA Technologies, Inc. Device 337e
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
Subsystem: ASRock Incorporation K7VT6 motherboard
Kernel driver in use: via-rhine
00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
02:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1)
Kernel driver in use: nvidia
Kernel modules: nvidia
80:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
Subsystem: ASRock Incorporation Device 0888
Kernel driver in use: HDA Intel
localhost ~ #

Kernel conf

http://pastebin.com/hYZa1vpe

.

VoidMage
Watchman

Joined: 14 Oct 2006
Posts: 6196

Posted: Tue Mar 02, 2010 1:13 pm Post subject:

While probably unrelated, drivers for 00:0f.0 and 00:0f.1 suggest you should migrate to pure libata setup. You seem to already have correct drivers selected, simply deselect old ones.

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Tue Mar 02, 2010 1:27 pm Post subject:

Which ones do i need to change ? This is really confusing is that not to do with my ide dvd drive ? Still my mouse is not working . And why does my gnome menu having no applications ? I emerged firefox and nothing i can just click the menu. Normally i have a standard set off applications when i emerge gnome-light

gentoo_newguy
Guru
Guru

Joined: 10 Oct 2006
Posts: 539

Posted: Tue Mar 02, 2010 2:39 pm Post subject:

Ok there seems to be some sort of bug that is messing up the gnome menus.

I have found there are to fixes but which one should i choose.

Code:

Due to bug #256614, you might loose icons in applications menus.
If you use a login manager, please re-select your session.
If you use startx and have no .xinitrc, just export XSESSION=Gnome.
If you use startx and have .xinitrc, export XDG_MENU_PREFIX=gnome-.

Another Option

Code:

Thanks for pointing me in the right direction, this was getting annoying.
I’m running Gentoo and I had the same problem you described, but for me I had to run
ln -s /etc/xdg/menus/gnome-applications.menu ./applications.menu
after remmoving applications.menu before anything reappeared.

Another option i found

Code:

cd /etc/xdg/menus/
sudo cp gnome-applications.menu applications.menu

I currently just type start x to login into gnome.

How would I tell if im using xinitrc or not ?

Also i still cant get my mouse working .

Display posts from previous:

	Gentoo Forums Forum Index Kernel & Hardware	All times are GMT Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2025 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy