| View previous topic :: View next topic |
| Author |
Message |
sputnik_uk
n00b
Joined: 28 Feb 2007
Posts: 47
|
 Posted: Sat Mar 06, 2010 4:12 pm Post subject: PPP connection to three mobile, nothing accessible. |
 |
|
Hi again peeps.
I'm trying to connect to the internet via bluetooth on my mobile phone, using wvdial.
It connects but the only IP i can ping is my local address, all other IP addrresses cannot be reached, even those of the assigned DNS servers.
I called three and i should be able to use the phone as a dial up modem, nothing is blocked their end. I'm not using a firewall.
Do I need to add a default route?
Any ideas?
/etc/wvdial.conf:
| Code: |
[Dialer defaults]
Modem = /dev/rfcomm0
[Dialer three]
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = 1
Modem Type = Analog Modem
ISDN = 0
Phone = *99\#
Modem = /dev/rfcomm0
username = username
Password = password
Dial Command = ATDT
Baud =466600
Init4 = AT+CGDCONT=1,"IP","three.co.uk"
rob@linux-g5a8:~>
|
| Code: |
linux-g5a8:/home/rob # wvdial three
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","three.co.uk"
AT+CGDCONT=1,"IP","three.co.uk"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat Mar 6 16:05:57 2010
--> Pid of pppd: 8203
--> Using interface ppp0
--> local IP address 10.19.41.23
--> remote IP address 10.6.6.6
--> primary DNS address 172.31.140.69
--> secondary DNS address 172.30.140.69
--> Script /etc/ppp/ip-up run successful
--> Default route Ok.
|
netstat -rn
| Code: |
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.6.6.6 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0
|
Thanks. |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54799
Location: 56N 3W
|
| Posted: Sat Mar 06, 2010 6:19 pm Post subject: |
|
|
sputnik_uk,
Yep - your default route is wrong.
The last line | Code: | | 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 |
should have 10.6.6.6 as the gateway, as thats your next hop towards the internet.
However, the first route should allow you to ping 10.6.6.6
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
sputnik_uk
n00b
Joined: 28 Feb 2007
Posts: 47
|
| Posted: Sat Mar 06, 2010 7:26 pm Post subject: |
|
|
| Can't ping the gateway, guess access is blocked at 3's end. Will try on a windows machine later, grr |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
