Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Alsaconf] ne détecte pas ma carte son {Résolu}
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
Damiatux
Apprentice
Apprentice


Joined: 23 Feb 2008
Posts: 194

PostPosted: Fri Mar 12, 2010 4:34 pm    Post subject: [Alsaconf] ne détecte pas ma carte son {Résolu} Reply with quote

Plop,

Je viens d'intaller récement une Gentoo avec un GNOME flambant neuf. Voulant se servir de ce PC comme bureau, j'ai donc suivis cette documentation. Tout ce passe très bien. Mais quand je fais alsaconf, j'ai droit à ça :
« No supported PnP or PCI card found.

Would you like to probe legacy ISA sound cards/ships? »

J'ai pourtant tout bien coché dans la configuration du kernel.
Voici ma carte son au cas où :
Code:
# lspci -v | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)


Que faire ?

Merci d'avance,
Damiatux


Last edited by Damiatux on Sat Mar 13, 2010 8:15 am; edited 1 time in total
Back to top
View user's profile Send private message
jcTux
Apprentice
Apprentice


Joined: 29 Dec 2009
Posts: 276
Location: Tours, France

PostPosted: Fri Mar 12, 2010 4:37 pm    Post subject: Reply with quote

Que renvoie la commande :
Code:
# lsmod

?
Back to top
View user's profile Send private message
Damiatux
Apprentice
Apprentice


Joined: 23 Feb 2008
Posts: 194

PostPosted: Fri Mar 12, 2010 8:25 pm    Post subject: Reply with quote

Code:
$ lsmod
Module                  Size  Used by
vboxnetflt             11632  0
vboxnetadp              5104  0
vboxdrv              1710236  2 vboxnetflt,vboxnetadp
gspca_main             22552  0
scsi_wait_scan          1432  0
test_nx                 2376  0
Back to top
View user's profile Send private message
Poussin
l33t
l33t


Joined: 08 Jun 2007
Posts: 659
Location: Liège

PostPosted: Fri Mar 12, 2010 8:34 pm    Post subject: Reply with quote

La sortie de ça
Code:

cat /usr/src/linux/.config | grep SND | grep -v \#


m'intéresserait
Back to top
View user's profile Send private message
Damiatux
Apprentice
Apprentice


Joined: 23 Feb 2008
Posts: 194

PostPosted: Fri Mar 12, 2010 8:41 pm    Post subject: Reply with quote

Code:
# cat /usr/src/linux/.config | grep SND | grep -v \#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCI=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_USB=y
CONFIG_SND_PCMCIA=y
Back to top
View user's profile Send private message
Poussin
l33t
l33t


Joined: 08 Jun 2007
Posts: 659
Location: Liège

PostPosted: Fri Mar 12, 2010 8:45 pm    Post subject: Reply with quote

essaie de passer alsa en module, de même que le pilote HDA intel

J'ai souvent eu des problemes quand tout cela était compilé en dur
Back to top
View user's profile Send private message
Damiatux
Apprentice
Apprentice


Joined: 23 Feb 2008
Posts: 194

PostPosted: Sat Mar 13, 2010 8:15 am    Post subject: Reply with quote

J'ai passé ALSA en module, et effectivement ça marche.
Merci pour votre aide.
Back to top
View user's profile Send private message
novazur
Guru
Guru


Joined: 19 Mar 2005
Posts: 461
Location: Martinique

PostPosted: Thu Nov 18, 2010 3:46 pm    Post subject: Reply with quote

Désolé de ressortir un vieux sujet, mais j'ai le même genre de problème.
alsaconf ne détecte pas ma carte. Pourtant, alsasound me trouve bien les modules de mon noyau, et alsamixer la voit bien lui.
Et tout ce qui concerne le son (et qui est modulaire) est en module dans mon noyau.
Code:
# /etc/init.d/alsasound start
 * Loading ALSA modules ...
 *   Could not detect custom ALSA settings.  Loading all detected alsa drivers.
 *   Loading: snd_hda_intel ...                                                                   [ ok ]
 *   Loading: snd_intel8x0 ...                                                                    [ ok ]
 *   Loading: snd-seq-oss ...                                                                     [ ok ]
 *   Loading: snd-mixer-oss ...                                                                   [ ok ]
 *   Loading: snd-pcm-oss ...                                                                     [ ok ]
 * Restoring Mixer Levels ...                                                                     [ ok ]

Code:
00:09.0 Audio device [0403]: nVidia Corporation MCP73 High Definition Audio [10de:07fc] (rev a1)
        Subsystem: Micro-Star International Co., Ltd. Device [1462:736b]
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at fea78000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

Code:
# play /usr/local/perso/sounds/sonnerie.wav

/usr/local/perso/sounds/sonnerie.wav:

 File Size: 24.5k     Bit Rate: 177k
  Encoding: Signed PCM
  Channels: 1 @ 16-bit
Samplerate: 11025Hz
Replaygain: off
  Duration: 00:00:01.10

In:100%  00:00:01.10 [00:00:00.00] Out:53.0k [      |      ] Hd:0.7 Clip:0
Done.

Code:

│ Card: HDA NVidia                                                             F1:  Help               │
│ Chip: Nvidia MCP73 HDMI                                                      F2:  System information │
│ View: F3:[Playback] F4: Capture  F5: All                                     F6:  Select sound card  │
│ Item: Master [dB gain: -9,00]                                                Esc: Exit               │
│                                                                                                      │
│                                                                                                      │
│                                                                                                      │
│                                                                                                      │
│                                                                                                      │
│    ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐             │
│    │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │  │     │  │     │  │     │  │             │
│    ├──┤     └──┘     ├──┤     ├──┤     ├──┤     ├──┤     ├──┤     ├──┤     ├──┤     └──┘     ┌──┐    │
│    │OO│              │OO│     │OO│     │OO│     │OO│     │OO│     │MM│     │OO│              │MM│    │
│    └──┘              └──┘     └──┘     └──┘     └──┘     └──┘     └──┘     └──┘              └──┘    │
│     81     83<>83    0<>0     0<>0      0        0       0<>0     0<>0     0<>0     0<>0             │
│ < Master >  PCM     Front   Surround  Center    LFE      Side     Line     Mic    Mic Boos  S/PDIF   │


Pourquoi diable alsaconf ne voit-il pas cette carte ?
Certes, je peux configurer à la main, mais j'aime bien les trucs qui marchent "normalement".

Des idées svp ?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum