| View previous topic :: View next topic |
| Author |
Message |
jettjunker
Apprentice
Joined: 10 Sep 2005
Posts: 267
|
 Posted: Mon Mar 22, 2010 1:37 am Post subject: networkmanager hangs -- won't get IP [SOLVED] |
 |
|
I finally upgraded networkmanager to 0.7.2, and it hangs at IP assignment (both circles green in nm-applet). ["ifconfig wlan0 up & iwconfig wlan0 essid Frink & dhclient wlan0" works just fine.] After "/etc/init.d/NetworkManager stop", "/usr/sbin/NetworkManager --no-daemon" displays:
| Code: | NetworkManager: <info> starting...
* status: started
NetworkManager: <info> (eth1): new Ethernet device (driver: 'e1000e')
NetworkManager: <info> (eth1): exported as /org/freedesktop/Hal/devices/net_00_1d_92_a0_f5_2d
NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'rt61pci')
NetworkManager: <info> (wlan0): exported as /org/freedesktop/Hal/devices/net_00_0e_2e_f1_8c_9f
NetworkManager: <info> (ttyS1): ignoring due to lack of mobile broadband capabilties
NetworkManager: <info> (ttyS0): ignoring due to lack of mobile broadband capabilties
NetworkManager: <info> (eth1): device state change: 1 -> 2 (reason 2)
NetworkManager: <info> (eth1): bringing up device.
NetworkManager: <info> (eth1): preparing device.
NetworkManager: <info> (eth1): deactivating device (reason: 2).
NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2)
NetworkManager: <info> (wlan0): preparing device.
NetworkManager: <info> (wlan0): deactivating device (reason: 2).
-- Error received: Numerical result out of range
-- Original message: type=0x19 length=56 flags=<REQUEST,ACK> sequence-nr=1269221043 pid=4201193
NetworkManager: <WARN> check_one_route(): (wlan0) error -34 returned from rtnl_route_del(): Sucess
NetworkManager: <info> (wlan0): supplicant interface state: starting -> ready
NetworkManager: <info> (wlan0): device state change: 2 -> 3 (reason 0)
NetworkManager: <info> Activation (wlan0) starting connection 'Auto Frink'
NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
NetworkManager: <info> (wlan0): device state change: 4 -> 5 (reason 0)
NetworkManager: <info> Activation (wlan0/wireless): connection 'Auto Frink' requires no security. No secrets needed.
NetworkManager: <info> Config: added 'ssid' value 'Frink'
NetworkManager: <info> Config: added 'scan_ssid' value '1'
NetworkManager: <info> Config: added 'key_mgmt' value 'NONE'
NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
NetworkManager: <info> Config: set interface ap_scan to 1
NetworkManager: <info> (wlan0): supplicant connection state: scanning -> disconnected
NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning
NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating
NetworkManager: <info> (wlan0): supplicant connection state: associating -> associated
NetworkManager: <info> (wlan0): supplicant connection state: associated -> completed
NetworkManager: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Frink'.
NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
NetworkManager: <info> (wlan0): device state change: 5 -> 7 (reason 0)
NetworkManager: <info> Activation (wlan0) Beginning DHCP transaction.
dhcpcd: unknown option `#'
NetworkManager: <info> dhcpcd started with pid 6921
NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
### above is where it hangs; below is after ctrl-C ###
^CNetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting down normally.
NetworkManager: <info> (eth1): now unmanaged
NetworkManager: <info> (eth1): device state change: 2 -> 1 (reason 36)
NetworkManager: <info> (eth1): cleaning up...
NetworkManager: <info> (eth1): taking down device.
NetworkManager: <info> (wlan0): now unmanaged
NetworkManager: <info> (wlan0): device state change: 7 -> 1 (reason 36)
NetworkManager: <info> (wlan0): deactivating device (reason: 36).
NetworkManager: <info> (wlan0): cleaning up...
NetworkManager: <info> (wlan0): taking down device.
NetworkManager: <info> exiting (success) |
any idea why?
_________________
Core2Duo T7100 1.8 ghz mini-itx, Nvidia FX220: Gentoo/Gnome/CompizFusion:XGL
CoreDuo 1.83 ghz 13" Macbook, GMA 950: Ubuntu/Gnome/CompizFusion:AIGLX
Last edited by jettjunker on Wed Mar 24, 2010 1:50 am; edited 1 time in total |
|
| Back to top |
|
 |
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Tue Mar 23, 2010 9:33 am Post subject: |
|
|
| Quote: | | dhcpcd: unknown option `#' |
I'm not sure, but dhcpcd under NetworkManager might still use the file:
Perhaps something wrong is inside there? |
|
| Back to top |
|
|
jettjunker
Apprentice
Joined: 10 Sep 2005
Posts: 267
|
| Posted: Wed Mar 24, 2010 1:50 am Post subject: |
|
|
Ha, that was it! I had a line that said (sans quotes): "option domain_name_servers, domain_name, domain_search # , host_name", and now that I commented it out, it works fine. Thank you 
_________________
Core2Duo T7100 1.8 ghz mini-itx, Nvidia FX220: Gentoo/Gnome/CompizFusion:XGL
CoreDuo 1.83 ghz 13" Macbook, GMA 950: Ubuntu/Gnome/CompizFusion:AIGLX |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
