Gentoo Forums :: View topic - s-ata laufwerk mit udma/133 ?

s-ata laufwerk mit udma/133 ?

View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Gentoo Forums Forum Index

Deutsches Forum (German)

View previous topic :: View next topic

Author

Message

pieter_parker
Veteran
Veteran

Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

Posted: Sun Apr 11, 2010 2:07 pm Post subject: s-ata laufwerk mit udma/133 ?

hab eine meiner s-ata laufwerke abgeklemmt

Code:

Apr 11 15:49:42 pc1 kernel: [3602458.747353] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen
Apr 11 15:49:42 pc1 kernel: [3602458.747357] ata3: irq_stat 0x00400040, connection status changed
Apr 11 15:49:42 pc1 kernel: [3602458.747362] ata3: SError: { PHYRdyChg 10B8B DevExch }
Apr 11 15:49:42 pc1 kernel: [3602458.747370] ata3: hard resetting link
Apr 11 15:49:42 pc1 kernel: [3602459.472038] ata3: SATA link down (SStatus 0 SControl 300)
Apr 11 15:49:47 pc1 kernel: [3602464.472020] ata3: hard resetting link
Apr 11 15:49:48 pc1 kernel: [3602464.779032] ata3: SATA link down (SStatus 0 SControl 300)
Apr 11 15:49:48 pc1 kernel: [3602464.779041] ata3: limiting SATA link speed to 1.5 Gbps
Apr 11 15:49:53 pc1 kernel: [3602469.779470] ata3: hard resetting link
Apr 11 15:49:53 pc1 kernel: [3602470.086059] ata3: SATA link down (SStatus 0 SControl 310)
Apr 11 15:49:53 pc1 kernel: [3602470.086065] ata3.00: disabled
Apr 11 15:49:53 pc1 kernel: [3602470.086074] ata3: EH complete
Apr 11 15:49:53 pc1 kernel: [3602470.086079] ata3.00: detaching (SCSI 2:0:0:0)
Apr 11 15:49:53 pc1 kernel: [3602470.183328] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
Apr 11 15:49:53 pc1 kernel: [3602470.183367] sd 2:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Apr 11 15:49:53 pc1 kernel: [3602470.183371] sd 2:0:0:0: [sdc] Stopping disk
Apr 11 15:49:53 pc1 kernel: [3602470.183389] sd 2:0:0:0: [sdc] START_STOP FAILED
Apr 11 15:49:53 pc1 kernel: [3602470.183391] sd 2:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

und wieder dran gesteckt

Code:

Apr 11 15:50:29 pc1 kernel: [3602506.061847] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
Apr 11 15:50:29 pc1 kernel: [3602506.061852] ata3: irq_stat 0x00000040, connection status changed
Apr 11 15:50:29 pc1 kernel: [3602506.061856] ata3: SError: { CommWake DevExch }
Apr 11 15:50:29 pc1 kernel: [3602506.061865] ata3: hard resetting link
Apr 11 15:50:39 pc1 kernel: [3602516.074385] ata3: softreset failed (device not ready)
Apr 11 15:50:39 pc1 kernel: [3602516.074389] ata3: hard resetting link
Apr 11 15:50:40 pc1 kernel: [3602516.955260] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 11 15:50:40 pc1 kernel: [3602516.956372] ata3.00: ATA-8: ST31000520AS, CC32, max UDMA/133
Apr 11 15:50:40 pc1 kernel: [3602516.956375] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Apr 11 15:50:40 pc1 kernel: [3602516.957886] ata3.00: configured for UDMA/133
Apr 11 15:50:40 pc1 kernel: [3602516.957893] ata3: EH complete
Apr 11 15:50:40 pc1 kernel: [3602516.967464] scsi 2:0:0:0: Direct-Access ATA ST31000520AS CC32 PQ: 0 ANSI: 5
Apr 11 15:50:40 pc1 kernel: [3602516.967611] sd 2:0:0:0: Attached scsi generic sg2 type 0
Apr 11 15:50:40 pc1 kernel: [3602516.968530] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Apr 11 15:50:40 pc1 kernel: [3602516.968561] sd 2:0:0:0: [sdc] Write Protect is off
Apr 11 15:50:40 pc1 kernel: [3602516.968563] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Apr 11 15:50:40 pc1 kernel: [3602516.968882] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 11 15:50:40 pc1 kernel: [3602516.968986] sdc: sdc1
Apr 11 15:50:40 pc1 kernel: [3602516.980178] sd 2:0:0:0: [sdc] Attached SCSI disk

warum laeuft das laufwerk mit udma/133 ? -> "ata3.00: configured for UDMA/133"

ScytheMan
l33t
l33t

Joined: 30 Nov 2005
Posts: 605

Posted: Sun Apr 11, 2010 2:25 pm Post subject:

schuss ins blaue: Im BIOS S-ATA AHCI Mode nicht aktiviert, sondern IDE Mode? gruß ScytheMan

pieter_parker
Veteran
Veteran

Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

Posted: Sun Apr 11, 2010 2:37 pm Post subject:

ne das steht auf ahci

lspci zeigt auch den intel onboard sata kontroller an

Code:

00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02)

und bei lsscsi sehe ich auch das laufwerk

Display posts from previous:

	Gentoo Forums Forum Index Deutsches Forum (German)	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2025 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy