kayve
Apprentice
Joined: 15 Oct 2009
Posts: 220
Location: San Francisco
|
 Posted: Thu Apr 15, 2010 3:42 am Post subject: clunky Mad dog HD |
 |
|
OK I got a nice static shunt now, but I have a feeling that old habits of swapping barebones HDs, 6 of them between two laptops, one IDE and one SATA, without making sure microelectronics conducted by squamous epithelia wouldn't induce the 33% incidence of strange behavior of HDs. One is dual booting FreeBSD 6.2 and a mangled Uncle Bill, if I am not mistaken, and the other fired up and magic smoke making scary noises that would surely menance any exceedingly mellow chihuahua but nonetheless managing to meet most expectations:
| Quote: |
kayve-gentoo emerges # uname -a
Linux kayve-gentoo 2.6.32-gentoo-r7 #1 SMP Fri Apr 9 03:09:09 PDT 2010 i686 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
kayve-gentoo emerges #
|
Both this HD and the FB6.2 make exceedingly macroscopic rattles, and additionally, this Gentoo2.6.32-r7 right now really seems to be pushing it's cooling mechanisms to the limit, with a nonstop purr giving my lap a massage right now.
| Quote: |
kayve-gentoo emerges # dmesg | more
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-gentoo-r7 (root@kayve-gentoo) (gcc version 4
.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Fri Apr 9 03:09:09 PDT 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b76b1000 (usable)
[ 0.000000] BIOS-e820: 00000000b76b1000 - 00000000b76b7000 (reserved)
[ 0.000000] BIOS-e820: 00000000b76b7000 - 00000000b77c5000 (usable)
[ 0.000000] BIOS-e820: 00000000b77c5000 - 00000000b780f000 (reserved)
--More--
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b76b1000 (usable)
[ 0.000000] BIOS-e820: 00000000b76b1000 - 00000000b76b7000 (reserved)
[ 0.000000] BIOS-e820: 00000000b76b7000 - 00000000b77c5000 (usable)
[ 0.000000] BIOS-e820: 00000000b77c5000 - 00000000b780f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b780f000 - 00000000b7909000 (usable)
[ 0.000000] BIOS-e820: 00000000b7909000 - 00000000b7b0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b7b0f000 - 00000000b7b19000 (usable)
[ 0.000000] BIOS-e820: 00000000b7b19000 - 00000000b7b1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b7b1f000 - 00000000b7b65000 (usable)
[ 0.000000] BIOS-e820: 00000000b7b65000 - 00000000b7b9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b7b9f000 - 00000000b7be3000 (usable)
[ 0.000000] BIOS-e820: 00000000b7be3000 - 00000000b7bfd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b7bfd000 - 00000000b7c00000 (usable)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around i
t.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) =
=> (reserved)
[ 0.000000] last_pfn = 0xb7c00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
--More--
d:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b7e00000 - 0000000100000000 (usable) =
=> (reserved)
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009d400 (usable)
[ 0.000000] modified: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000b76b1000 (usable)
[ 0.000000] modified: 00000000b76b1000 - 00000000b76b7000 (reserved)
[ 0.000000] modified: 00000000b76b7000 - 00000000b77c5000 (usable)
[ 0.000000] modified: 00000000b77c5000 - 00000000b780f000 (reserved)
[ 0.000000] modified: 00000000b780f000 - 00000000b7909000 (usable)
[ 0.000000] modified: 00000000b7909000 - 00000000b7b0f000 (reserved)
--More--
0.000000] modified: 00000000b7b0f000 - 00000000b7b19000 (usable)
[ 0.000000] modified: 00000000b7b19000 - 00000000b7b1f000 (reserved)
[ 0.000000] modified: 00000000b7b1f000 - 00000000b7b65000 (usable)
[ 0.000000] modified: 00000000b7b65000 - 00000000b7b9f000 (ACPI NVS)
[ 0.000000] modified: 00000000b7b9f000 - 00000000b7be3000 (usable)
[ 0.000000] modified: 00000000b7be3000 - 00000000b7bfd000 (ACPI data)
[ 0.000000] modified: 00000000b7bfd000 - 00000000b7c00000 (usable)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] ACPI: RSDP 000f7270 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT b7bf4f69 0006C (v01 GATEWA SYSTEM 20081105 LTP 0000
0000)
[ 0.000000] ACPI: FACP b7be7000 000F4 (v03 GATEWA SYSTEM 20081105 ALAN 0000
0001)
[ 0.000000] ACPI: DSDT b7be8000 07C21 (v02 GATEWA SYSTEM 20081105 INTL 2005
0624)
[ 0.000000] ACPI: FACS b7b9efc0 00040
[ 0.000000] ACPI: HPET b7bfcd86 00038 (v01 GATEWA SYSTEM 20081105 LOHR 0000
--More--
[ 0.000000] ACPI: MCFG b7bfcdbe 0003C (v01 GATEWA SYSTEM 20081105 LOHR 0000
005A)
[ 0.000000] ACPI: SLIC b7bfcdfa 00176 (v01 GATEWA SYSTEM 20081105 LTP 0000
0000)
[ 0.000000] ACPI: APIC b7bfcf70 00068 (v01 GATEWA SYSTEM 20081105 LTP 0000
0000)
[ 0.000000] ACPI: BOOT b7bfcfd8 00028 (v01 GATEWA SYSTEM 20081105 LTP 0000
0001)
[ 0.000000] ACPI: SSDT b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 2005
0624)
[ 0.000000] ACPI: SSDT b7be5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 2005
0624)
[ 0.000000] ACPI: SSDT b7be4000 0020F (v01 PmRef ApTst 00003000 INTL 2005
0624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2052MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
--More--
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
[ 0.000000] #3 [0001000000 - 000181edd8] TEXT DATA BSS ==> [0001000000 -
000181edd8]
[ 0.000000] #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 -
0000100000]
[ 0.000000] #5 [000181f000 - 000182620c] BRK ==> [000181f000 -
000182620c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 -
0000011000]
[ 0.000000] #7 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 -
0000018000]
[ 0.000000] found SMP MP-table at [c00f7340] f7340
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000b7c00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
--More--
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000b76b1
[ 0.000000] 0: 0x000b76b7 -> 0x000b77c5
[ 0.000000] 0: 0x000b780f -> 0x000b7909
[ 0.000000] 0: 0x000b7b0f -> 0x000b7b19
[ 0.000000] 0: 0x000b7b1f -> 0x000b7b65
[ 0.000000] 0: 0x000b7b9f -> 0x000b7be3
[ 0.000000] 0: 0x000b7bfd -> 0x000b7c00
[ 0.000000] On node 0 totalpages: 751837
[ 0.000000] free_area_init_node: node 0, pgdat c16f92c0, node_mem_map c182820
0
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4105 pages used for memmap
[ 0.000000] HighMem zone: 520521 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
--More--
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at b7c00000 (gap: b7c00000:4840
--More--
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s33624 r0 d23720 u2097152
[ 0.000000] pcpu-alloc: s33624 r0 d23720 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 745956
[ 0.000000] Kernel command line: root=/dev/sda3
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000377fe:000b7c00)
[ 0.000000] Memory: 2973512k/3010560k available (4542k kernel code, 32868k re
served, 2647k data, 404k init, 2098504k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
--More--
[ 0.000000] .init : 0xc1706000 - 0xc176b000 ( 404 kB)
[ 0.000000] .data : 0xc146fbde - 0xc1705a74 (2647 kB)
[ 0.000000] .text : 0xc1000000 - 0xc146fbde (4542 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, N
odes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.786 MHz processor.
[ 0.001005] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 3989.57 BogoMIPS (lpj=1994786)
[ 0.002088] Security Framework initialized
[ 0.002167] SELinux: Initializing.
[ 0.002247] SELinux: Starting in permissive mode
[ 0.002254] Mount-cache hash table entries: 512
[ 0.002448] Initializing cgroup subsys ns
[ 0.002526] Initializing cgroup subsys cpuacct
[ 0.002605] Initializing cgroup subsys freezer
[ 0.002699] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002814] CPU: L2 cache: 2048K
[ 0.002891] CPU: Physical Processor ID: 0
[ 0.002967] CPU: Processor Core ID: 0
[ 0.003005] mce: CPU supports 6 MCE banks
[ 0.003086] CPU0: Thermal monitoring enabled (TM2)
[ 0.003165] using mwait in idle threads.
[ 0.003246] Performance Events: Core2 events, Intel PMU driver.
[ 0.003403] ... version: 2
[ 0.004002] ... bit width: 40
[ 0.004078] ... generic registers: 2
[ 0.004154] ... value mask: 000000ffffffffff
[ 0.004232] ... max period: 000000007fffffff
[ 0.004310] ... fixed-purpose events: 3
[ 0.004386] ... event mask: 0000000700000003
[ 0.004468] Checking 'hlt' instruction... OK.
[ 0.008640] ACPI: Core revision 20090903
[ 0.020372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030728] CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a
[ 0.030995] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.001999] Initializing CPU#1
[ 0.001999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001999] CPU: L2 cache: 2048K
[ 0.001999] CPU: Physical Processor ID: 0
[ 0.001999] CPU: Processor Core ID: 1
[ 0.001999] CPU1: Thermal monitoring enabled (TM2)
[ 0.101072] CPU1: Intel(R) Core(TM)2 CPU T6400 @ 2.00GHz stepping 0a
[ 0.101678] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.102002] Brought up 2 CPUs
[ 0.102078] Total of 2 processors activated (7979.36 BogoMIPS).
[ 0.103546] khelper used greatest stack depth: 6904 bytes left
[ 0.104021] Time: 3:10:42 Date: 04/15/10
[ 0.104136] NET: Registered protocol family 16
[ 0.104239] ACPI: bus type pci registered
[ 0.104239] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.104239] PCI: Not using MMCONFIG.
[ 0.106916] PCI: PCI BIOS revision 3.00 entry at 0xfdbe1, last bus=7
[ 0.106985] PCI: Using configuration type 1 for base access
[ 0.113034] bio: create slab <bio-0> at 0
[ 0.114325] ACPI: EC: Look up EC in DSDT
[ 0.117438] ACPI: BIOS _OSI(Linux) query ignored
[ 0.121121] ACPI: Interpreter enabled
[ 0.121212] ACPI: (supports S0 S3 S4 S5)
[ 0.121457] ACPI: Using IOAPIC for interrupt routing
--More--
[ 0.001999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001999] CPU: L2 cache: 2048K
[ 0.001999] CPU: Physical Processor ID: 0
[ 0.001999] CPU: Processor Core ID: 1
[ 0.001999] CPU1: Thermal monitoring enabled (TM2)
[ 0.101072] CPU1: Intel(R) Core(TM)2 CPU T6400 @ 2.00GHz stepping 0a
[ 0.101678] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.102002] Brought up 2 CPUs
[ 0.102078] Total of 2 processors activated (7979.36 BogoMIPS).
[ 0.103546] khelper used greatest stack depth: 6904 bytes left
[ 0.104021] Time: 3:10:42 Date: 04/15/10
[ 0.104136] NET: Registered protocol family 16
[ 0.104239] ACPI: bus type pci registered
[ 0.104239] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.104239] PCI: Not using MMCONFIG.
[ 0.106916] PCI: PCI BIOS revision 3.00 entry at 0xfdbe1, last bus=7
[ 0.106985] PCI: Using configuration type 1 for base access
[ 0.113034] bio: create slab <bio-0> at 0
[ 0.114325] ACPI: EC: Look up EC in DSDT
[ 0.117438] ACPI: BIOS _OSI(Linux) query ignored
[ 0.121121] ACPI: Interpreter enabled
[ 0.121212] ACPI: (supports S0 S3 S4 S5)
[ 0.121457] ACPI: Using IOAPIC for interrupt routing
--More--
[ 0.001999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001999] CPU: L2 cache: 2048K
[ 0.001999] CPU: Physical Processor ID: 0
[ 0.001999] CPU: Processor Core ID: 1
[ 0.001999] CPU1: Thermal monitoring enabled (TM2)
[ 0.101072] CPU1: Intel(R) Core(TM)2 CPU T6400 @ 2.00GHz stepping 0a
[ 0.101678] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.102002] Brought up 2 CPUs
[ 0.102078] Total of 2 processors activated (7979.36 BogoMIPS).
[ 0.103546] khelper used greatest stack depth: 6904 bytes left
[ 0.104021] Time: 3:10:42 Date: 04/15/10
[ 0.104136] NET: Registered protocol family 16
[ 0.104239] ACPI: bus type pci registered
[ 0.104239] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.104239] PCI: Not using MMCONFIG.
[ 0.106916] PCI: PCI BIOS revision 3.00 entry at 0xfdbe1, last bus=7
[ 0.106985] PCI: Using configuration type 1 for base access
[ 0.113034] bio: create slab <bio-0> at 0
[ 0.114325] ACPI: EC: Look up EC in DSDT
[ 0.117438] ACPI: BIOS _OSI(Linux) query ignored
[ 0.121121] ACPI: Interpreter enabled
[ 0.121212] ACPI: (supports S0 S3 S4 S5)
[ 0.121457] ACPI: Using IOAPIC for interrupt routing
--More--
[ 0.121584] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.124143] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.124225] PCI: Using MMCONFIG for extended config space
[ 0.634099] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.634271] ACPI: No dock devices found.
[ 0.635284] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.635396] pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf03fffff]
[ 0.635396] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.635396] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.635396] pci 0000:00:02.1: reg 10 64bit mmio: [0xf0400000-0xf04fffff]
[ 0.635396] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.635396] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.635415] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
[ 0.635507] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0b04800-0xf0b04bff]
[ 0.635576] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.636005] pci 0000:00:1a.7: PME# disabled
[ 0.636132] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0900000-0xf0903fff]
[ 0.636186] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.636268] pci 0000:00:1b.0: PME# disabled
[ 0.636422] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.636504] pci 0000:00:1c.0: PME# disabled
[ 0.636662] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.636743] pci 0000:00:1c.2: PME# disabled
--More--
[ 0.636902] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.637004] pci 0000:00:1c.5: PME# disabled
[ 0.637147] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 0.637236] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 0.637324] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 0.637417] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0b04c00-0xf0b04fff]
[ 0.637486] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.637568] pci 0000:00:1d.7: PME# disabled
[ 0.637871] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
[ 0.637878] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
[ 0.637885] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
[ 0.637892] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
[ 0.637899] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.637906] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0b04000-0xf0b047ff]
[ 0.637948] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.638004] pci 0000:00:1f.2: PME# disabled
[ 0.638115] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
[ 0.638133] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.638240] pci 0000:02:00.0: reg 10 64bit mmio: [0xf0500000-0xf0501fff]
[ 0.638347] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.638432] pci 0000:02:00.0: PME# disabled
[ 0.638575] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.638579] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0500000-0xf05fffff]
--More--
[ 0.638587] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0c00000-0xf0cfffff]
[ 0.638639] pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff]
[ 0.638644] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0600000-0xf06fffff]
[ 0.638652] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0d00000-0xf0dfffff]
[ 0.639131] pci 0000:06:00.0: reg 10 64bit mmio: [0xf0700000-0xf0703fff]
[ 0.639182] pci 0000:06:00.0: reg 18 io port: [0x4000-0x40ff]
[ 0.639387] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.639662] pci 0000:06:00.0: supports D1 D2
[ 0.639664] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.639766] pci 0000:06:00.0: PME# disabled
[ 0.640019] pci 0000:00:1c.5: bridge io port: [0x4000-0x4fff]
[ 0.640024] pci 0000:00:1c.5: bridge 32bit mmio: [0xf0700000-0xf07fffff]
[ 0.640088] pci 0000:07:09.0: reg 10 32bit mmio: [0xf0800000-0xf0800fff]
[ 0.640148] pci 0000:07:09.0: supports D1 D2
[ 0.640150] pci 0000:07:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.640233] pci 0000:07:09.0: PME# disabled
[ 0.640352] pci 0000:07:09.2: reg 10 32bit mmio: [0xf0801000-0xf08010ff]
[ 0.640413] pci 0000:07:09.2: supports D1 D2
[ 0.640415] pci 0000:07:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.640498] pci 0000:07:09.2: PME# disabled
[ 0.640622] pci 0000:00:1e.0: transparent bridge
[ 0.640704] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0800000-0xf08fffff]
[ 0.640733] pci_bus 0000:00: on NUMA node 0
--More--
[ 0.640739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.640961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.641063] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.641153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.641230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.653086] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.653718] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *1
0
[ 0.654656] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.655282] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *1
0
[ 0.656003] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
, disabled.
[ 0.656740] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.657359] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *1
1
[ 0.658073] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.658657] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem
,locks=none
[ 0.658657] vgaarb: loaded
[ 0.659026] SCSI subsystem initialized
[ 0.659119] libata version 3.00 loaded.
[ 0.659138] usbcore: registered new interface driver usbfs
[ 0.659138] usbcore: registered new interface driver hub
[ 0.659138] usbcore: registered new device driver usb
[ 0.659138] PCI: Using ACPI for IRQ routing
[ 0.660338] cfg80211: Using static regulatory domain info
[ 0.660338] cfg80211: Regulatory domain: US
[ 0.660338] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp
)
[ 0.660338] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.660353] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.660433] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.661003] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.661083] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.661164] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.661248] cfg80211: Calling CRDA for country: US
[ 0.661341] NetLabel: Initializing
[ 0.661341] NetLabel: domain hash size = 128
[ 0.661341] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.661341] NetLabel: unlabeled traffic allowed by default
[ 0.661341] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.662003] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.665032] Switching to clocksource tsc
[ 0.667007] pnp: PnP ACPI init
[ 0.667094] ACPI: bus type pnp registered
[ 0.671419] pnp: PnP ACPI: found 10 devices
[ 0.671496] ACPI: ACPI bus type pnp unregistered
[ 0.671583] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.671668] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.671749] system 00:05: ioport range 0x480-0x48f has been reserved
[ 0.671829] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.671911] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.671992] system 00:05: ioport range 0x400-0x47f has been reserved
[ 0.672076] system 00:05: ioport range 0x1180-0x11ff has been reserved
[ 0.672157] system 00:05: ioport range 0x164e-0x164f has been reserved
[ 0.672237] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.672322] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.672403] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.672485] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.672566] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.672648] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.672730] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.672812] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.672893] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.707671] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.707752] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.707834] pci 0000:00:1c.0: MEM window: 0xf0500000-0xf05fffff
[ 0.707916] pci 0000:00:1c.0: PREFETCH window: 0x000000f0c00000-0x000000f0c
--More--
fffff
[ 0.708037] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.708117] pci 0000:00:1c.2: IO window: 0x3000-0x3fff
[ 0.708199] pci 0000:00:1c.2: MEM window: 0xf0600000-0xf06fffff
[ 0.708281] pci 0000:00:1c.2: PREFETCH window: 0x000000f0d00000-0x000000f0d
fffff
[ 0.708400] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
[ 0.708480] pci 0000:00:1c.5: IO window: 0x4000-0x4fff
[ 0.708562] pci 0000:00:1c.5: MEM window: 0xf0700000-0xf07fffff
[ 0.708644] pci 0000:00:1c.5: PREFETCH window: 0xb8000000-0xb81fffff
[ 0.708729] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 0.708808] pci 0000:00:1e.0: IO window: disabled
[ 0.708889] pci 0000:00:1e.0: MEM window: 0xf0800000-0xf08fffff
[ 0.708970] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.709064] alloc irq_desc for 17 on node -1
[ 0.709067] alloc kstat_irqs on node -1
[ 0.709072] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.709155] pci 0000:00:1c.0: setting latency timer to 64
[ 0.709164] alloc irq_desc for 18 on node -1
[ 0.709166] alloc kstat_irqs on node -1
[ 0.709170] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.709252] pci 0000:00:1c.2: setting latency timer to 64
[ 0.709261] alloc irq_desc for 16 on node -1
--More--
[ 0.709263] alloc kstat_irqs on node -1
[ 0.709266] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.709349] pci 0000:00:1c.5: setting latency timer to 64
[ 0.709356] pci 0000:00:1e.0: setting latency timer to 64
[ 0.709361] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.709364] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.709366] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.709369] pci_bus 0000:02: resource 1 mem: [0xf0500000-0xf05fffff]
[ 0.709372] pci_bus 0000:02: resource 2 pref mem [0xf0c00000-0xf0cfffff]
[ 0.709375] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 0.709377] pci_bus 0000:04: resource 1 mem: [0xf0600000-0xf06fffff]
[ 0.709380] pci_bus 0000:04: resource 2 pref mem [0xf0d00000-0xf0dfffff]
[ 0.709382] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
[ 0.709385] pci_bus 0000:06: resource 1 mem: [0xf0700000-0xf07fffff]
[ 0.709388] pci_bus 0000:06: resource 2 pref mem [0xb8000000-0xb81fffff]
[ 0.709390] pci_bus 0000:07: resource 1 mem: [0xf0800000-0xf08fffff]
[ 0.709393] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 0.709395] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
[ 0.709424] NET: Registered protocol family 2
[ 0.709575] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.709935] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.710464] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.710739] TCP: Hash tables configured (established 131072 bind 65536)
--More--
[ 0.710819] TCP reno registered
[ 0.710961] NET: Registered protocol family 1
[ 0.711151] RPC: Registered udp transport module.
[ 0.711228] RPC: Registered tcp transport module.
[ 0.711305] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.711394] pci 0000:00:02.0: Boot video device
[ 0.711403] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x1030
[ 0.711405] pci 0000:00:1a.0: Performing full reset
[ 0.711422] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.711424] pci 0000:00:1a.1: Performing full reset
[ 0.711442] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.711444] pci 0000:00:1a.2: Performing full reset
[ 0.711489] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.711491] pci 0000:00:1d.0: Performing full reset
[ 0.711508] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.711510] pci 0000:00:1d.1: Performing full reset
[ 0.711527] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.711529] pci 0000:00:1d.2: Performing full reset
[ 0.711702] Simple Boot Flag at 0x36 set to 0x1
[ 0.712615] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa04
[ 0.712700] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0x0
[ 0.712817] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.712932] Scanning for low memory corruption every 60 seconds
--More--
[ 0.713279] audit: initializing netlink socket (disabled)
[ 0.713366] type=2000 audit(1271301041.713:1): initialized
[ 0.723995] highmem bounce pool size: 64 pages
[ 0.724080] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.726729] VFS: Disk quotas dquot_6.5.2
[ 0.726916] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.727713] msgmni has been set to 1710
[ 0.727945] SELinux: Registering netfilter hooks
[ 0.728299] alg: No test for stdrng (krng)
[ 0.728466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.728579] io scheduler noop registered
[ 0.728655] io scheduler anticipatory registered
[ 0.728732] io scheduler deadline registered
[ 0.728867] io scheduler cfq registered (default)
[ 0.729106] alloc irq_desc for 24 on node -1
[ 0.729109] alloc kstat_irqs on node -1
[ 0.729119] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.729129] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.729332] alloc irq_desc for 25 on node -1
[ 0.729334] alloc kstat_irqs on node -1
[ 0.729342] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
[ 0.729351] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.729553] alloc irq_desc for 26 on node -1
--More--
[ 0.729555] alloc kstat_irqs on node -1
[ 0.729562] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.729572] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.729780] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.732741] Non-volatile memory driver v1.3
[ 0.732932] Linux agpgart interface v0.103
[ 0.733068] agpgart-intel 0000:00:00.0: Intel Mobile Intel�� GM45 Express Chipset
[ 0.733958] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 0.760112] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.761481] ACPI: AC Adapter [ACAD] (on-line)
[ 0.761703] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/in
put0
[ 0.762094] ACPI: Lid Switch [LID]
[ 0.762274] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/
input1
[ 0.762391] ACPI: Power Button [PWRB]
[ 0.762530] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/
input2
[ 0.762645] ACPI: Sleep Button [SLPB]
[ 0.762786] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.762902] ACPI: Power Button [PWRF]
[ 0.763534] ACPI: SSDT b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.764185] ACPI: SSDT b7b19620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
--More--
[ 0.766491] Monitor-Mwait will be used to enter C-1 state
[ 0.766514] Monitor-Mwait will be used to enter C-2 state
[ 0.766521] Marking TSC unstable due to TSC halts in idle
[ 0.766673] Switching to clocksource hpet
[ 0.766755] processor LNXCPU:00: registered as cooling_device0
[ 0.767272] ACPI: SSDT b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.767821] ACPI: SSDT b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.769047] processor LNXCPU:01: registered as cooling_device1
[ 0.775503] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.775587] ACPI: Thermal Zone [TZ00] (34 C)
[ 0.775762] [drm] Initialized drm 1.1.0 20060810
[ 0.775900] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.775982] pci 0000:00:02.0: setting latency timer to 64
[ 0.783280] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-comb
ining
[ 0.783398] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 0.783549] alloc irq_desc for 27 on node -1
[ 0.783552] alloc kstat_irqs on node -1
[ 0.783560] pci 0000:00:02.0: irq 27 for MSI/MSI-X
[ 1.283017] acpi device:07: registered as cooling_device2
[ 1.283516] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:
01/input/input4
[ 1.283638] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.283769] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.283938] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.287142] brd: module loaded
[ 1.288599] loop: module loaded
[ 1.288851] input: Macintosh mouse button emulation as /devices/virtual/input/input5
[ 1.289530] ahci 0000:00:1f.2: version 3.0
[ 1.289545] alloc irq_desc for 19 on node -1
[ 1.289547] alloc kstat_irqs on node -1
[ 1.289553] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.289669] alloc irq_desc for 28 on node -1
[ 1.289671] alloc kstat_irqs on node -1
[ 1.289679] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.289720] ahci: SSS flag set, parallel bus scan disabled
[ 1.289831] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA
mode
[ 1.289947] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pmp pio slum part c
cc sxs
[ 1.290105] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.290467] scsi0 : ahci
[ 1.290738] scsi1 : ahci
[ 1.290923] scsi2 : ahci
[ 1.291115] scsi3 : ahci
[ 1.291307] scsi4 : ahci
[ 1.291491] scsi5 : ahci
[ 1.291672] ata1: SATA max UDMA/133 abar m2048@0xf0b04000 port 0xf0b04100 irq 28
[ 1.291787] ata2: SATA max UDMA/133 abar m2048@0xf0b04000 port 0xf0b04180 irq 28
[ 1.291900] ata3: DUMMY
[ 1.291973] ata4: DUMMY
[ 1.292079] ata5: SATA max UDMA/133 abar m2048@0xf0b04000 port 0xf0b04300 irq 28
[ 1.292192] ata6: SATA max UDMA/133 abar m2048@0xf0b04000 port 0xf0b04380 irq 28
[ 1.292741] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.292821] Copyright (c) 1999-2006 Intel Corporation.
[ 1.292947] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.293054] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.293223] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.293308] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.293518] sky2 driver version 1.25
[ 1.293656] sky2 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.293781] sky2 0000:06:00.0: setting latency timer to 64
[ 1.293867] sky2 0000:06:00.0: Yukon-2 (chip 0xba) chip revision 0
[ 1.294509] alloc irq_desc for 29 on node -1
[ 1.294511] alloc kstat_irqs on node -1
[ 1.294606] sky2 0000:06:00.0: irq 29 for MSI/MSI-X
[ 1.295259] sky2 eth0: addr 00:e0:b8:fd:ca:71
[ 1.295497] console [netcon0] enabled
[ 1.295573] netconsole: network logging started
[ 1.295814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.295894] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
[ 1.295916] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.296008] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.296012] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.296106] drivers/usb/core/inode.c: creating file 'devices'
[ 1.296110] drivers/usb/core/inode.c: creating file '001'
[ 1.296161] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.296311] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered
!ppc ports=6
[ 1.296316] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit
addr
[ 1.296341] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.296422] ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Peri
odic period=1024 Reset HALT
[ 1.300311] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.300313] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 1.300326] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0b04800
[ 1.300408] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=102
4 Reset HALT
[ 1.304306] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024
RUN
[ 1.310264] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
--More--
[ 1.310375] usb usb1: default language 0x0409
[ 1.310382] usb usb1: udev 1, busnum 1, minor = 0
[ 1.310385] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.310466] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.310579] usb usb1: Product: EHCI Host Controller
[ 1.310656] usb usb1: Manufacturer: Linux 2.6.32-gentoo-r7 ehci_hcd
[ 1.310735] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.310847] usb usb1: uevent
[ 1.310890] usb usb1: usb_probe_device
[ 1.310893] usb usb1: configuration #1 chosen from 1 choice
[ 1.310977] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.310991] usb 1-0:1.0: uevent
[ 1.311030] hub 1-0:1.0: usb_probe_interface
[ 1.311033] hub 1-0:1.0: usb_probe_interface - got id
[ 1.311035] hub 1-0:1.0: USB hub found
[ 1.311117] hub 1-0:1.0: 6 ports detected
[ 1.311193] hub 1-0:1.0: standalone hub
[ 1.311194] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.311196] hub 1-0:1.0: individual port over-current protection
[ 1.311198] hub 1-0:1.0: power on to power good time: 20ms
[ 1.311203] hub 1-0:1.0: local power source is good
[ 1.311205] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.311236] drivers/usb/core/inode.c: creating file '001'
[ 1.311265] alloc irq_desc for 23 on node -1
[ 1.311267] alloc kstat_irqs on node -1
[ 1.311271] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.311361] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.311365] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.311446] drivers/usb/core/inode.c: creating file '002'
[ 1.311505] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.311623] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered
!ppc ports=6
[ 1.311627] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit
addr
[ 1.311652] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.311731] ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Peri
odic period=1024 Reset HALT
[ 1.315631] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.315633] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 1.315645] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0b04c00
[ 1.315726] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=102
4 Reset HALT
[ 1.319594] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024
RUN
[ 1.325016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.325109] usb usb2: default language 0x0409
--More--
[ 1.325115] usb usb2: udev 1, busnum 2, minor = 128
[ 1.325118] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.325199] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.325316] usb usb2: Product: EHCI Host Controller
[ 1.325393] usb usb2: Manufacturer: Linux 2.6.32-gentoo-r7 ehci_hcd
[ 1.325473] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.325581] usb usb2: uevent
[ 1.325622] usb usb2: usb_probe_device
[ 1.325625] usb usb2: configuration #1 chosen from 1 choice
[ 1.325707] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.325721] usb 2-0:1.0: uevent
[ 1.325760] hub 2-0:1.0: usb_probe_interface
[ 1.325762] hub 2-0:1.0: usb_probe_interface - got id
[ 1.325764] hub 2-0:1.0: USB hub found
[ 1.325845] hub 2-0:1.0: 6 ports detected
[ 1.325920] hub 2-0:1.0: standalone hub
[ 1.325922] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.325924] hub 2-0:1.0: individual port over-current protection
[ 1.325926] hub 2-0:1.0: power on to power good time: 20ms
[ 1.325930] hub 2-0:1.0: local power source is good
[ 1.325932] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.325962] drivers/usb/core/inode.c: creating file '001'
[ 1.326031] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
--More--
[ 1.326111] ohci_hcd: block sizes: ed 64 td 64
[ 1.326157] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.326262] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.326347] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.326351] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.326433] drivers/usb/core/inode.c: creating file '003'
[ 1.326493] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.326611] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.326692] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.326694] uhci_hcd 0000:00:1a.0: Performing full reset
[ 1.326719] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.326827] usb usb3: default language 0x0409
[ 1.326833] usb usb3: udev 1, busnum 3, minor = 256
[ 1.326836] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.326917] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.327038] usb usb3: Product: UHCI Host Controller
[ 1.327116] usb usb3: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[ 1.327196] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.327311] usb usb3: uevent
[ 1.327352] usb usb3: usb_probe_device
[ 1.327355] usb usb3: configuration #1 chosen from 1 choice
[ 1.327437] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.327455] usb 3-0:1.0: uevent
--More--
[ 1.327496] hub 3-0:1.0: usb_probe_interface
[ 1.327499] hub 3-0:1.0: usb_probe_interface - got id
[ 1.327501] hub 3-0:1.0: USB hub found
[ 1.327580] hub 3-0:1.0: 2 ports detected
[ 1.327656] hub 3-0:1.0: standalone hub
[ 1.327658] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.327660] hub 3-0:1.0: individual port over-current protection
[ 1.327662] hub 3-0:1.0: power on to power good time: 2ms
[ 1.327666] hub 3-0:1.0: local power source is good
[ 1.327668] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.327683] drivers/usb/core/inode.c: creating file '001'
[ 1.327714] alloc irq_desc for 21 on node -1
[ 1.327715] alloc kstat_irqs on node -1
[ 1.327720] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.327806] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.327809] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.327890] drivers/usb/core/inode.c: creating file '004'
[ 1.327946] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.328078] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.328158] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.328160] uhci_hcd 0000:00:1a.1: Performing full reset
[ 1.328185] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.328290] usb usb4: default language 0x0409
--More--
[ 1.328297] usb usb4: udev 1, busnum 4, minor = 384
[ 1.328300] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.328380] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.328493] usb usb4: Product: UHCI Host Controller
[ 1.328570] usb usb4: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[ 1.328649] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.328760] usb usb4: uevent
[ 1.328799] usb usb4: usb_probe_device
[ 1.328801] usb usb4: configuration #1 chosen from 1 choice
[ 1.328883] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.328897] usb 4-0:1.0: uevent
[ 1.328936] hub 4-0:1.0: usb_probe_interface
[ 1.328939] hub 4-0:1.0: usb_probe_interface - got id
[ 1.328940] hub 4-0:1.0: USB hub found
[ 1.329028] hub 4-0:1.0: 2 ports detected
[ 1.329104] hub 4-0:1.0: standalone hub
[ 1.329105] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.329107] hub 4-0:1.0: individual port over-current protection
[ 1.329109] hub 4-0:1.0: power on to power good time: 2ms
[ 1.329113] hub 4-0:1.0: local power source is good
[ 1.329115] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.329130] drivers/usb/core/inode.c: creating file '001'
[ 1.329160] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
--More--
[ 1.329245] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.329248] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.329333] drivers/usb/core/inode.c: creating file '005'
[ 1.329391] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.329509] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.329589] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.329591] uhci_hcd 0000:00:1a.2: Performing full reset
[ 1.329609] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.329712] usb usb5: default language 0x0409
[ 1.329718] usb usb5: udev 1, busnum 5, minor = 512
[ 1.329721] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.329801] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.329914] usb usb5: Product: UHCI Host Controller
[ 1.329993] usb usb5: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[ 1.330088] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.330202] usb usb5: uevent
[ 1.330242] usb usb5: usb_probe_device
[ 1.330245] usb usb5: configuration #1 chosen from 1 choice
[ 1.330330] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.330345] usb 5-0:1.0: uevent
[ 1.330384] hub 5-0:1.0: usb_probe_interface
[ 1.330387] hub 5-0:1.0: usb_probe_interface - got id
[ 1.330389] hub 5-0:1.0: USB hub found
--More--
[ 1.330469] hub 5-0:1.0: 2 ports detected
[ 1.330545] hub 5-0:1.0: standalone hub
[ 1.330547] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.330548] hub 5-0:1.0: individual port over-current protection
[ 1.330551] hub 5-0:1.0: power on to power good time: 2ms
[ 1.330554] hub 5-0:1.0: local power source is good
[ 1.330556] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.330571] drivers/usb/core/inode.c: creating file '001'
[ 1.330603] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.330688] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.330691] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.330772] drivers/usb/core/inode.c: creating file '006'
[ 1.330826] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.330944] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.331033] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.331035] uhci_hcd 0000:00:1d.0: Performing full reset
[ 1.331050] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 1.331055] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.331160] usb usb6: default language 0x0409
[ 1.331167] usb usb6: udev 1, busnum 6, minor = 640
[ 1.331169] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.331250] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.331366] usb usb6: Product: UHCI Host Controller
--More--
[ 1.331443] usb usb6: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[ 1.331523] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.331634] usb usb6: uevent
[ 1.331675] usb usb6: usb_probe_device
[ 1.331678] usb usb6: configuration #1 chosen from 1 choice
[ 1.331760] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 1.331774] usb 6-0:1.0: uevent
[ 1.331816] hub 6-0:1.0: usb_probe_interface
[ 1.331818] hub 6-0:1.0: usb_probe_interface - got id
[ 1.331820] hub 6-0:1.0: USB hub found
[ 1.331899] hub 6-0:1.0: 2 ports detected
[ 1.331975] hub 6-0:1.0: standalone hub
[ 1.331977] hub 6-0:1.0: no power switching (usb 1.0)
[ 1.331979] hub 6-0:1.0: individual port over-current protection
[ 1.331981] hub 6-0:1.0: power on to power good time: 2ms
[ 1.331985] hub 6-0:1.0: local power source is good
[ 1.331987] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 1.332023] drivers/usb/core/inode.c: creating file '001'
[ 1.332059] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.332144] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.332147] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.332228] drivers/usb/core/inode.c: creating file '007'
[ 1.332283] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
--More--
[ 1.332400] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.332480] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.332482] uhci_hcd 0000:00:1d.1: Performing full reset
[ 1.332497] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 1.332502] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.332610] usb usb7: default language 0x0409
[ 1.332617] usb usb7: udev 1, busnum 7, minor = 768
[ 1.332619] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.332700] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.333527] usb usb7: Product: UHCI Host Controller
[ 1.333605] usb usb7: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[ 1.333685] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.333795] usb usb7: uevent
[ 1.333834] usb usb7: usb_probe_device
[ 1.333836] usb usb7: configuration #1 chosen from 1 choice
[ 1.333918] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 1.333933] usb 7-0:1.0: uevent
[ 1.333971] hub 7-0:1.0: usb_probe_interface
[ 1.333974] hub 7-0:1.0: usb_probe_interface - got id
[ 1.333976] hub 7-0:1.0: USB hub found
[ 1.334064] hub 7-0:1.0: 2 ports detected
[ 1.334140] hub 7-0:1.0: standalone hub
[ 1.334142] hub 7-0:1.0: no power switching (usb 1.0)
--More--
[ 1.334143] hub 7-0:1.0: individual port over-current protection
[ 1.334145] hub 7-0:1.0: power on to power good time: 2ms
[ 1.334149] hub 7-0:1.0: local power source is good
[ 1.334151] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 1.334166] drivers/usb/core/inode.c: creating file '001'
[ 1.334199] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.334288] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.334292] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.334372] drivers/usb/core/inode.c: creating file '008'
[ 1.334427] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.334545] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.334626] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.334628] uhci_hcd 0000:00:1d.2: Performing full reset
[ 1.334652] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.334757] usb usb8: default language 0x0409
[ 1.334764] usb usb8: udev 1, busnum 8, minor = 896
[ 1.334766] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.334846] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.334959] usb usb8: Product: UHCI Host Controller
[ 1.335045] usb usb8: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[ 1.335124] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.335235] usb usb8: uevent
[ 1.335279] usb usb8: usb_probe_device
--More--
[ 1.335282] usb usb8: configuration #1 chosen from 1 choice
[ 1.335364] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 1.335378] usb 8-0:1.0: uevent
[ 1.335417] hub 8-0:1.0: usb_probe_interface
[ 1.335419] hub 8-0:1.0: usb_probe_interface - got id
[ 1.335421] hub 8-0:1.0: USB hub found
[ 1.335502] hub 8-0:1.0: 2 ports detected
[ 1.335578] hub 8-0:1.0: standalone hub
[ 1.335580] hub 8-0:1.0: no power switching (usb 1.0)
[ 1.335582] hub 8-0:1.0: individual port over-current protection
[ 1.335584] hub 8-0:1.0: power on to power good time: 2ms
[ 1.335588] hub 8-0:1.0: local power source is good
[ 1.335590] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 1.335610] drivers/usb/core/inode.c: creating file '001'
[ 1.335723] usbcore: registered new interface driver usblp
[ 1.335802] Initializing USB Mass Storage driver...
[ 1.335942] usbcore: registered new interface driver usb-storage
[ 1.336039] USB Mass Storage support registered.
[ 1.336177] usbcore: registered new interface driver libusual
[ 1.336356] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.341186] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.344522] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.344607] serio: i8042 AUX0 port at 0x60,0x64 irq 12
--More--
[ 1.344708] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.344809] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.344908] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.345152] mice: PS/2 mouse device common for all mice
[ 1.345666] rtc_cmos 00:06: RTC can wake from S4
[ 1.345805] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.345909] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.346041] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.346158] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI regio
n SMBI [0x1c00-0x1c0f]
[ 1.346278] ACPI: If an ACPI driver is available for this device, you should use it i
nstead of the native driver
[ 1.346648] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@red
hat.com
[ 1.347108] cpuidle: using governor ladder
[ 1.347635] cpuidle: using governor menu
[ 1.349140] usbcore: registered new interface driver hiddev
[ 1.349269] usbcore: registered new interface driver usbhid
[ 1.349348] usbhid: v2.6:USB HID core driver
[ 1.349630] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 1.350168] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 1.350255] alloc irq_desc for 22 on node -1
[ 1.350257] alloc kstat_irqs on node -1
--More--
[ 1.350263] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.350409] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1.384343] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/inp
ut/input6
[ 1.411104] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CON
NECT
[ 1.411111] hub 1-0:1.0: port 3: status 0501 change 0001
[ 1.425113] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.426792] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/inpu
t7
[ 1.427035] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.427062] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/inpu
t8
[ 1.427340] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card
0/input9
[ 1.428664] ALSA device list:
[ 1.428739] #0: HDA Intel at 0xf0900000 irq 22
[ 1.428859] Netfilter messages via NETLINK v0.30.
[ 1.428951] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.429118] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00
[ 1.429329] ctnetlink v0.93: registering with nfnetlink.
[ 1.430090] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.430191] TCP cubic registered
--More--
[ 1.430269] Initializing XFRM netlink socket
[ 1.430402] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.430743] NET: Registered protocol family 10
[ 1.431922] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.432071] IPv6 over IPv4 tunneling driver
[ 1.432214] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.432841] NET: Registered protocol family 17
[ 1.433671] Using IPI No-Shortcut mode
[ 1.433960] PM: Resume from disk failed.
[ 1.433972] registered taskstats version 1
[ 1.434709] Magic number: 6:46:159
[ 1.434920] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.435034] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.511095] hub 1-0:1.0: state 7 ports 6 chg 0008 evt 0000
[ 1.511105] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 1.562331] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 1.562336] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CO
NNECT
[ 1.613095] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.664206] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 1.664210] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CO
NNECT
[ 1.751085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
--More--
[ 1.753057] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[ 1.753144] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.755608] ata1.00: configured for UDMA/133
[ 1.761612] usb 1-3: skipped 1 descriptor after configuration
[ 1.761617] usb 1-3: skipped 6 descriptors after interface
[ 1.761622] usb 1-3: skipped 1 descriptor after endpoint
[ 1.761626] usb 1-3: skipped 10 descriptors after interface
[ 1.762237] usb 1-3: default language 0x0409
[ 1.768866] usb 1-3: udev 2, busnum 1, minor = 1
[ 1.768869] usb 1-3: New USB device found, idVendor=04f2, idProduct=b071
[ 1.768956] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.769058] usb 1-3: Product: CNF7129
[ 1.769141] usb 1-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.769228] usb 1-3: SerialNumber: SN0001
[ 1.769360] usb 1-3: uevent
[ 1.769425] usb 1-3: usb_probe_device
[ 1.769428] usb 1-3: configuration #1 chosen from 1 choice
[ 1.769847] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
[ 1.771622] usb 1-3:1.0: uevent
[ 1.771733] usb 1-3: adding 1-3:1.1 (config #1, interface 1)
[ 1.771753] usb 1-3:1.1: uevent
[ 1.771836] drivers/usb/core/inode.c: creating file '002'
[ 1.771855] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
--More--
[ 2.454093] usb usb3: suspend_rh (auto-stop)
[ 2.454120] usb usb5: suspend_rh (auto-stop)
[ 2.454145] usb usb6: suspend_rh (auto-stop)
[ 2.454170] usb usb7: suspend_rh (auto-stop)
[ 2.454195] usb usb8: suspend_rh (auto-stop)
[ 2.454219] usb usb4: suspend_rh (auto-stop)
[ 2.474911] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04
000
[ 2.536652] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input
/input10
[ 3.666450] ACPI: Battery Slot [BAT1] (battery present)
[ 3.666715] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI
: 5
[ 3.667262] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.667589] sd 0:0:0:0: [sda] Write Protect is off
[ 3.667669] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.667683] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.667799] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't supp
ort DPO or FUA
[ 3.668071] sda:
[ 3.704044] hub 2-0:1.0: hub_suspend
[ 3.704125] usb usb2: bus auto-suspend
[ 3.704129] ehci_hcd 0000:00:1d.7: suspend root hub
--More--
[ 3.704153] hub 3-0:1.0: hub_suspend
[ 3.704158] usb usb3: bus auto-suspend
[ 3.704161] usb usb3: suspend_rh
[ 3.704179] hub 5-0:1.0: hub_suspend
[ 3.704184] usb usb5: bus auto-suspend
[ 3.704187] usb usb5: suspend_rh
[ 3.704210] hub 6-0:1.0: hub_suspend
[ 3.704212] usb usb6: bus auto-suspend
[ 3.704214] usb usb6: suspend_rh
[ 3.704229] hub 7-0:1.0: hub_suspend
[ 3.704232] usb usb7: bus auto-suspend
[ 3.704234] usb usb7: suspend_rh
[ 3.704249] hub 8-0:1.0: hub_suspend
[ 3.704252] usb usb8: bus auto-suspend
[ 3.704254] usb usb8: suspend_rh
[ 3.736437] sda1 sda2 sda3
[ 3.747641] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.125114] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.144696] ata2.00: ATAPI: Optiarc DVD RW AD-7583S, LX01, max UDMA/100, ATAPI AN
[ 4.165019] ata2.00: configured for UDMA/100
[ 4.166544] scsi 1:0:0:0: CD-ROM Optia
_________________
Kayven Riese, BSCS,
MS (Physiology and Biophysics)
(415) 902 5513 cellular
http://kayve.net/kayve
Webmaster http://ChessYoga.org |
|
| Back to top |
|
 |
kayve
Apprentice
Joined: 15 Oct 2009
Posts: 220
Location: San Francisco
|
|
| Back to top |
|
|
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Thu Apr 15, 2010 8:02 am Post subject: Re: clunky Mad dog HD |
|
|
| kayve wrote: | | Both this HD and the FB6.2 make exceedingly macroscopic rattles, and additionally |
Are you know comparing a HD with FreeBSD6.2?  I think you are also asking two questions:
- One (or two?) of my HD's makes rattling noices, what to do?
- Upgrading the kernel made one of my laptops (the one with FreeBSD6.2) hot, what to do?
Am I right? |
|
| Back to top |
|
|
kayve
Apprentice
Joined: 15 Oct 2009
Posts: 220
Location: San Francisco
|
| Posted: Thu Apr 15, 2010 5:01 pm Post subject: rattling |
|
|
they both rattle, I was getting worried about the wirr. The FB6.2 HW is old, I am not worried about doing anything about that. I guess one thing I would like to know is am I right, static electricity could have caused these rattles? Is there something else going on? This morning the new laptop, I have 3HDs, one with Microsoft, one with Ubuntu, and this one. I physically take them out to swap booting, instead of "dual boot." I have noted that other folk out there do this, there shouldn't be anything wrong with doing this, right? I have taken to avoiding excessive swapping of late. The Gentoo HD is now continuing to spin right now. I have noted that the clunks (different than the "wirr" or the "purr." Clunks sound distinctly like something bad is happening, but nothing seems to really come of it for the most part--the "wirr/purr" right now is scaring me because it is nonstop. It is a normal sound of a HD working, but why is it working all the time like this.. it reminds me of running a CD/DVD based OS like Knoppix or Freesbie (?))..
I have noted that Gentoo is noticing clunks during startup and hangs sometimes. I am worried about this mess. I am wondering about prudent options.. well.. obviously one is "get a new HD" I might do that, but I really hope there is something less drastic right now just because I need to spend time on using this computer and not building a new OS right now.
_________________
Kayven Riese, BSCS,
MS (Physiology and Biophysics)
(415) 902 5513 cellular
http://kayve.net/kayve
Webmaster http://ChessYoga.org |
|
| Back to top |
|
|
kayve
Apprentice
Joined: 15 Oct 2009
Posts: 220
Location: San Francisco
|
| Posted: Thu Apr 15, 2010 7:44 pm Post subject: why is everything that gets posted here pushed off to the le |
|
|
Everything I see written is pushed off to the left. What happened?
_________________
Kayven Riese, BSCS,
MS (Physiology and Biophysics)
(415) 902 5513 cellular
http://kayve.net/kayve
Webmaster http://ChessYoga.org |
|
| Back to top |
|
|
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Fri Apr 16, 2010 12:11 am Post subject: |
|
|
The ratling sound could be the 'click of death' (ie your disk is dying).
Why everything is aligned to the left, I don't know. Thought it was a joke from you or something  |
|
| Back to top |
|
|
kayve
Apprentice
Joined: 15 Oct 2009
Posts: 220
Location: San Francisco
|
| Posted: Sat Apr 17, 2010 2:02 am Post subject: "clunk of death" overrated |
|
|
I have been running the clunky FreeBSD 6.2 for years, although I try not to.
What can I do about my never stopping Gentoo disk?
_________________
Kayven Riese, BSCS,
MS (Physiology and Biophysics)
(415) 902 5513 cellular
http://kayve.net/kayve
Webmaster http://ChessYoga.org |
|
| Back to top |
|
|
Rexilion
Veteran
Joined: 17 Mar 2009
Posts: 1044
|
| Posted: Sat Apr 17, 2010 1:51 pm Post subject: Re: "clunk of death" overrated |
|
|
| kayve wrote: | | What can I do about my never stopping Gentoo disk? |
Perhaps with hdparm you could:
- disable the disk
- enable suspend mode
- disable writebuffer
etc etc |
|
| Back to top |
|
|
kayve
Apprentice
Joined: 15 Oct 2009
Posts: 220
Location: San Francisco
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
