Fritz!DSL beim booten starten

[BaiLong]

Hi,

folgendes Problem: Meine Fritzcard DSL startet erst beim 2. mal vernuenftig:

root@zeus bailong # capiinit start
Warning: loading /lib/modules/2.4.20-gentoo-r2/misc/fcdsl.o will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
/lib/modules/2.4.20-gentoo-r2/misc/fcdsl.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-gentoo-r2/misc/fcdsl.o: insmod /lib/modules/2.4.20-gentoo-r2/misc/fcdsl.o failed
/lib/modules/2.4.20-gentoo-r2/misc/fcdsl.o: insmod fcdsl failed
ERROR: failed to load driver fcdsl

Das war das erste mal. Ein Versuch gleich nochmal bringt folgendes Ergebnis:

root@zeus bailong # capiinit start
Warning: loading /lib/modules/2.4.20-gentoo-r2/misc/fcdsl.o will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module fcdsl loaded, with warnings
1 fcdsl running fcdsl-pci A1 3.10-05 io e9000000 mem e980
2 fcdsl running fcdsl-pci A1 3.10-05 io e9000000 mem e980

Na sowas... geht doch. Aber warum geht das nicht beim ersten mal? Hier ein Log-Auszug:

May 20 19:20:23 zeus kernel: CAPI-driver Rev 1.1.4.1: loaded
May 20 19:20:23 zeus kernel: capifs: Rev 1.1.4.1
May 20 19:20:23 zeus kernel: capi20: started up with major 68
May 20 19:20:23 zeus kernel: kcapi: capi20 attached
May 20 19:20:23 zeus kernel: capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs)
May 20 19:20:23 zeus kernel: fcdsl: AVM FRITZ!Card DSL driver, revision 0.2
May 20 19:20:23 zeus kernel: fcdsl: (fcdsl built on May 19 2003 at 15:02:11)
May 20 19:20:23 zeus kernel: fcdsl: Loading...
May 20 19:20:23 zeus kernel: fcdsl: Driver 'fcdsl' attached to stack
May 20 19:20:23 zeus kernel: kcapi: driver fcdsl attached
May 20 19:20:23 zeus kernel: fcdsl: Auto-attaching...
May 20 19:20:23 zeus kernel: PCI: Enabling device 00:0a.0 (0014 -> 0016)
May 20 19:20:23 zeus kernel: PCI: Assigned IRQ 9 for device 00:0a.0
May 20 19:20:23 zeus kernel: fcdsl: Could not claim required resources.
May 20 19:20:23 zeus kernel: fcdsl: Not loaded.
May 20 19:20:23 zeus kernel: kcapi: driver fcdsl detached
May 20 19:20:23 zeus kernel: fcdsl: Driver 'fcdsl' detached

May 20 19:20:26 zeus kernel: fcdsl: AVM FRITZ!Card DSL driver, revision 0.2
May 20 19:20:26 zeus kernel: fcdsl: (fcdsl built on May 19 2003 at 15:02:11)
May 20 19:20:26 zeus kernel: fcdsl: Loading...
May 20 19:20:26 zeus kernel: fcdsl: Driver 'fcdsl' attached to stack
May 20 19:20:26 zeus kernel: kcapi: driver fcdsl attached
May 20 19:20:26 zeus kernel: fcdsl: Auto-attaching...
May 20 19:20:26 zeus kernel: PCI: Found IRQ 9 for device 00:0a.0
May 20 19:20:26 zeus kernel: kcapi: Controller 1: fcdsl-pci attached
May 20 19:20:26 zeus kernel: kcapi: Controller 2: fcdsl-pci attached
May 20 19:20:26 zeus kernel: fcdsl: Loaded.
May 20 19:20:26 zeus kernel: fcdsl: Using VCC/VPI/VCI = 0x1/0x1/0x20
May 20 19:20:26 zeus kernel: fcdsl: Stack version 3.10-05
May 20 19:20:26 zeus kernel: fcdsl: Stack version 3.10-05
May 20 19:20:26 zeus kernel: kcapi: card 1 "fcdsl-pci" ready.
May 20 19:20:26 zeus kernel: kcapi: card 2 "fcdsl-pci" ready.
May 20 19:20:26 zeus kernel: kcapi: notify up contr 1
May 20 19:20:26 zeus kernel: capi: controller 1 up
May 20 19:20:26 zeus kernel: kcapi: notify up contr 2
May 20 19:20:26 zeus kernel: capi: controller 2 up

Wie zu sehen ist, wird bei beiden Versuchen der gleiche IRQ benutzt, einmal erfolglos, danach erfolgreich. Was ist das Problem?

Gruss
Sven

[ph_flippy]

Hast du's inzwischen zum Laufen bekommen oder brauchst du noch Hilfe?

[BaiLong]

Laeuft. "PnP OS" im Bios abgestellt.