| View previous topic :: View next topic |
| Author |
Message |
bendeguz
Apprentice
Joined: 10 Feb 2010
Posts: 189
|
 Posted: Sun May 02, 2010 12:47 pm Post subject: [solved] yet another nvidia black screen thread |
 |
|
#########
I have put back my radeon, i don't have time for this now. It doesn't worth it, to play with stupid games. 
update: trying again
#########
Hi!
So, I borrowed an nvidia geforce4 mx420 card , to change my radeon with it...
nv driver works
nvidia driver doesn't work: after startx i see a black screen; monitor is not on suspend; have to reset
| Code: |
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo i686
Current Operating System: Linux evilmonkey 2.6.33-gentoo #4 Wed Mar 10 12:27:05 CET 2010 i686
Build Date: 06 February 2010 08:45:03PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 2 13:49:51 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x3aa0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0172:10de:015a nVidia Corporation NV17 [GeForce4 MX 420] rev 163, Mem @ 0xf6000000/16777216, 0xf8000000/67108864, 0xf7800000/524288, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.16 Thu Jan 28 16:14:25 PST 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.16 Thu Jan 28 16:02:25 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
|
| Code: |
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "dri"
Load "glx"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "false"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "hu"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
EndSection
Section "Monitor"
Identifier "My Monitor"
HorizSync 30-96
VertRefresh 50-160
Modeline "800x600_100" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
Modeline "1024x768_100" 113.31 1024 1056 1208 1392 768 769 772 814 -HSync +Vsync
Modeline "1152x864_100" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
EndSection
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
# BusID "PCI:01:00.0"
Driver "nvidia"
VideoRam 65536
# Option "RenderAccel" "True"
# Option "AddARBGLXVisuals" "True"
# Option "AddARBVisuals" "True"
# Option "AGPMode" "4"
# Option "AccelMethod" "EXA"
# Option "AGPFastWrite" "1"
# Option "EnablePageFlip" "1"
# Option "ColorTiling" "1"
# Option "DRI" "1"
# Option "XAANoOffscreenPixmaps"
# Option "UseFastTLS" "2"
# Insert Clocks lines here if appropriate
EndSection
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1152x864_100" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768_100" "800x600_100" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768_100" "1024x768_100" "800x600_100" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#Section "DRI"
# Mode 0666
#EndSection
#Section "Extensions"
#Option "Composite" "Enable"
#Option "RENDER" "Enable"
#EndSection
|
Don't ask me to recompile kernel, because i can't because of another issues:)
Thanks for reading...
Last edited by bendeguz on Tue May 04, 2010 5:46 pm; edited 3 times in total |
|
| Back to top |
|
 |
tryn
Guru
Joined: 21 Dec 2002
Posts: 325
Location: 39.885° N. -88.913° W.
|
| Posted: Sun May 02, 2010 3:30 pm Post subject: |
|
|
You didn't say what Nvidia driver you emerged?
Not all drivers will work with every card.
Don't know if you did this command
Don't know if you ran this command | Code: | | eselect opengl set nvidia |
Probably need the
These are just some of the things that we would need info on to enable us to help you.
There are also settings that you might have to add in the Kernel for it to work if this info isn't there now. |
|
| Back to top |
|
|
bendeguz
Apprentice
Joined: 10 Feb 2010
Posts: 189
|
| Posted: Sun May 02, 2010 4:09 pm Post subject: |
|
|
| tryn wrote: | You didn't say what Nvidia driver you emerged?
Not all drivers will work with every card.
Don't know if you did this command
Don't know if you ran this command | Code: | | eselect opengl set nvidia |
Probably need the
These are just some of the things that we would need info on to enable us to help you.
There are also settings that you might have to add in the Kernel for it to work if this info isn't there now. |
nvidia-drivers-96.43.16
etc-update: nothing to do
did the eselect thing
| Code: |
Portage 2.1.8.3 (default/linux/x86/10.0, gcc-4.4.1, glibc-2.11-r1, 2.6.33-gentoo i686)
=================================================================
System uname: Linux-2.6.33-gentoo-i686-AMD_Athlon-TM-_XP_1700+-with-gentoo-2.0.1
Timestamp of tree: Sun, 18 Apr 2010 01:45:01 +0000
app-shells/bash: 4.1_p2
dev-java/java-config: 1.3.7-r1, 2.1.10
dev-lang/python: 2.4.4-r6, 2.6.4-r1, 3.1.1-r1
dev-python/pycrypto: 2.0.1-r8
dev-util/cmake: 2.8.0-r2
sys-apps/baselayout: 2.0.1
sys-apps/openrc: 0.6.0-r1
sys-apps/sandbox: 2.2
sys-devel/autoconf: 2.13, 2.65
sys-devel/automake: 1.8.5-r3, 1.9.6-r2, 1.10.3, 1.11.1
sys-devel/binutils: 2.20.1
sys-devel/gcc: 4.4.1
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6b
virtual/os-headers: 2.6.33
ACCEPT_KEYWORDS="x86 ~x86"
ACCEPT_LICENSE="* -@EULA PUEL"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=athlon-xp -O2 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/splash /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-march=athlon-xp -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests buildpkg distlocks fixpackages news parallel-fetch protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://gentoo.inf.elte.hu ftp://gd.tuwien.ac.at/opsys/linux/gentoo/"
LANG="hu_HU"
LC_ALL="hu_HU.UTF-8"
LDFLAGS="-Wl,-O1"
LINGUAS="hu en"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="X acl acpi alsa berkdb bzip2 cairo cli cracklib crypt cups cxx dri fortran gdbm gecko gnutls gpm gtk hal iconv jpeg lm_sensors modules mudflap ncurses nls nptl nptlonly opengl openmp pam pcre perl png pppd python readline reflection secure-delete session spl ssl svg sysfs tcpd unicode x86 xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="hu en" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="radeon vesa nvidia nv"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
well, my kernel is set to work with the radeon driver, so agpgart is compiled in, drm is compiled in for radeon, support for frame buffer devices is marked, but there are no devices compiled |
|
| Back to top |
|
|
alunduil
Retired Dev
Joined: 13 Mar 2005
Posts: 96
Location: San Antonio, TX, USA
|
| Posted: Sun May 02, 2010 4:19 pm Post subject: |
|
|
The nvidia-drivers should complain if you have drm compiled into your kernel as they are incompatible. Unfortunately, you may have to rebuild your kernel before the nvidia-drivers run.
Also, I noticed in your Xorg.0.log that everything ran fine. What version of xorg-server do you have and have you tried letting dbus take care of everything?
Regards,
Alunduil |
|
| Back to top |
|
|
bendeguz
Apprentice
Joined: 10 Feb 2010
Posts: 189
|
| Posted: Tue May 04, 2010 10:47 am Post subject: |
|
|
Ok, I've built another kernel without drm and framebuffer.
Now, the nvidia driver works, but I have no direct rendering yet. It still has the mesa glx.
| Code: |
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-gentoo i686
Current Operating System: Linux evilmonkey 2.6.33-gentoo #15 Tue May 4 11:53:09 CEST 2010 i686
Build Date: 04 May 2010 12:21:36PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 4 13:54:44 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoAddDevices" "false"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0172:10de:015a nVidia Corporation NV17 [GeForce4 MX 420] rev 163, Mem @ 0xf6000000/16777216, 0xf8000000/67108864, 0xf7800000/524288, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.16 Thu Jan 28 16:14:25 PST 2010
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.5.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 96.43.16 Thu Jan 28 16:02:25 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 MX 420 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 65536 kBytes
(--) NVIDIA(0): VideoBIOS: 04.17.00.45.af
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 MX 420 at PCI:1:0:0:
(--) NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) NVIDIA(0): Samsung SyncMaster (CRT-0): 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768_100"
(II) NVIDIA(0): "800x600_100"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1024x768_100"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse1: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Mouse1: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(**) Mouse1: (accel) keeping acceleration scheme 1
(**) Mouse1: (accel) filter chain progression: 2.00
(**) Mouse1: (accel) filter stage 0: 20.00 ms
(**) Mouse1: (accel) set acceleration profile 0
(II) Mouse1: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc102"
(**) Keyboard1: XkbModel: "pc102"
(**) Option "XkbLayout" "hu"
(**) Keyboard1: XkbLayout: "hu"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device USB Optical Mouse
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(EE) config/hal: NewInputDeviceRequest failed (8)
|
| Code: |
server glx vendor string: Brian Paul
server glx version string: 1.4 Mesa 7.0.2
client glx vendor string: Brian Paul
client glx version string: 1.4 Mesa 7.0.2
OpenGL vendor string: Brian Paul
OpenGL renderer string: Mesa X11
OpenGL version string: 2.1 Mesa 7.0.2
OpenGL shading language version string: 1.10 Mesa 7.0.2
|
|
|
| Back to top |
|
|
alunduil
Retired Dev
Joined: 13 Mar 2005
Posts: 96
Location: San Antonio, TX, USA
|
| Posted: Tue May 04, 2010 1:44 pm Post subject: |
|
|
Do you have the hald started? Also, just double checking that you're using the nvidia opengl interface?
Regards,
Alunduil |
|
| Back to top |
|
|
bendeguz
Apprentice
Joined: 10 Feb 2010
Posts: 189
|
| Posted: Tue May 04, 2010 2:06 pm Post subject: |
|
|
| alunduil wrote: | Do you have the hald started? Also, just double checking that you're using the nvidia opengl interface?
|
yes, hald is running
well i tried with emerge nvidia-drivers and then "eselect opengl set nvidia", but that didn't work
now i have an installation made by running the install package(that has the ncurses interface) with sh
so now i have:
| Code: |
Available OpenGL implementations:
[1] xorg-x11 *
|
but the nvidia installer should handle this, i guess |
|
| Back to top |
|
|
alunduil
Retired Dev
Joined: 13 Mar 2005
Posts: 96
Location: San Antonio, TX, USA
|
| Posted: Tue May 04, 2010 2:17 pm Post subject: |
|
|
Why didn't the emerge nvidia-drivers work? You mentioned that you were using the nvidia sh installer directly which means that the opengl stuff would need to be setup by hand.
Regards,
Alunduil |
|
| Back to top |
|
|
bendeguz
Apprentice
Joined: 10 Feb 2010
Posts: 189
|
| Posted: Tue May 04, 2010 4:03 pm Post subject: |
|
|
| I've reinstalled nvidia-drivers with emerge and set the nvidia interface, but it produces the same mesa glx. |
|
| Back to top |
|
|
alunduil
Retired Dev
Joined: 13 Mar 2005
Posts: 96
Location: San Antonio, TX, USA
|
| Posted: Tue May 04, 2010 4:32 pm Post subject: |
|
|
It probably does have the same GLX info but what is the new Xorg.0.log with the eselect opengl set nvidia?
Are there new errors?
Regards,
Alunduil |
|
| Back to top |
|
|
unax
n00b
Joined: 04 May 2010
Posts: 20
Location: Russia, Novokuznetsk (Siberia)
|
| Posted: Tue May 04, 2010 4:34 pm Post subject: |
|
|
advise..
Section "Module"
.........
Disable "dri2"
Disable "dri"
.......
EndSection
I have already installed the driver for mx 440, like the same driver version or older. The kernel must be compiled without support nvidea. |
|
| Back to top |
|
|
alunduil
Retired Dev
Joined: 13 Mar 2005
Posts: 96
Location: San Antonio, TX, USA
|
| Posted: Tue May 04, 2010 4:50 pm Post subject: |
|
|
Try this for your xorg.conf:
Section "Device"
Identifier "nvidia"
Driver "nvidia"
EndSection
And post back the Xorg.0.log if it fails for some reason.
Regards,
Alunduil |
|
| Back to top |
|
|
bendeguz
Apprentice
Joined: 10 Feb 2010
Posts: 189
|
| Posted: Tue May 04, 2010 5:02 pm Post subject: |
|
|
looks like i have some big problem here
ldd /usr/bin/glxgears
linux-gate.so.1 => (0xb77e7000)
libGL.so.1 => /usr/local/lib/libGL.so.1 (0xb752a000)
libm.so.6 => /lib/libm.so.6 (0xb7504000)
libX11.so.6 => /usr/lib/libX11.so.6 (0xb73e8000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb73cf000)
libc.so.6 => /lib/libc.so.6 (0xb728a000)
libXext.so.6 => /usr/lib/libXext.so.6 (0xb7279000)
/lib/ld-linux.so.2 (0xb77e8000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb725e000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb725a000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb7254000)
libdl.so.2 => /lib/libdl.so.2 (0xb7250000)
so it seems i have some mesa package in the system which i was installed by hand, and forgot to uninstall  , and applications are built against it
i didn't realize that glxinfo mentions mesa 7.0.2, but i have mesa 7.5.2 from portage 
any suggestions alunduil?
Last edited by bendeguz on Tue May 04, 2010 5:05 pm; edited 1 time in total |
|
| Back to top |
|
|
alunduil
Retired Dev
Joined: 13 Mar 2005
Posts: 96
Location: San Antonio, TX, USA
|
| Posted: Tue May 04, 2010 5:04 pm Post subject: |
|
|
Is there any chance you still have the build directory and can do a make uninstall? If so I recommend that, otherwise you'll have to rebuild the source build and then using the install log remove those files by hand (or some BASH trickery). After that remerge mesa and then revdep-rebuild should take care of everything (crossing my fingers).
Regards,
Alunduil |
|
| Back to top |
|
|
bendeguz
Apprentice
Joined: 10 Feb 2010
Posts: 189
|
| Posted: Tue May 04, 2010 5:12 pm Post subject: |
|
|
| alunduil wrote: | If so I recommend that, otherwise you'll have to rebuild the source build and then using the install log remove those files by hand (or some BASH trickery).
|
you mean compile the 7.0.2 by hand?
what if i build the 7.0.2 by hand, install it, then make an unistall, then revdep-rebuild
no, i don't have the 7.0.2 build files
anyway, it will be fun
or while it is dynamically linked, jus change the symlink to point at /usr/lib/libGL.so(it is already pointing at the nvidia libGL) |
|
| Back to top |
|
|
bendeguz
Apprentice
Joined: 10 Feb 2010
Posts: 189
|
| Posted: Tue May 04, 2010 5:46 pm Post subject: |
|
|
| bendeguz wrote: |
or while it is dynamically linked, jus change the symlink to point at /usr/lib/libGL.so(it is already pointing at the nvidia libGL) |
hurray, it's working
Thank you for the help, Alunduil!
update: no, it's not working. I've tried nexuiz and regnum online, and after a minute X was frozen. I had to reset.
So back to radeon again.  |
|
| Back to top |
|
|
bendeguz
Apprentice
Joined: 10 Feb 2010
Posts: 189
|
| Posted: Wed May 05, 2010 6:30 pm Post subject: |
|
|
ok, it's working...
Maybe it was a BIOS setting, or xorg.conf problem. And i've put a ventilator to the graphics card, too |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
