emerge -uDNpv world [SOLVED]

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

python-updater finished without any errors. I think I'm done updating for now. Thanks for all your help.
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

I spoke too soon. I went ahead and rebooted my system and now my keyboard & mouse are not working. Not sure what could have caused that during the update. I have to step out again and will try to boot with a sysrescue and see what could be wrong.
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

tliou · Posted: Sun May 30, 2010 3:32 am Post subject:

I actually posted something a few days ago that might help. Take a look:

https://forums.gentoo.org/viewtopic-t-828046-highlight-.html

If you can boot the system and ssh into your machine, you should be able to follow the instructions. This looks like the problem that people have been having recently with xorg-server-1.7.6

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

Thanks for the suggestion. I think I should be able to chroot into my system and try your solution. I will report back tomorrow.
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

tliou · Posted: Sun May 30, 2010 4:11 am Post subject:

I'll be on the look out.

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

# emerge -av =xorg-server-1.8.0

* IMPORTANT: 13 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild U ] media-fonts/font-util-1.1.1-r1 [1.1.1] USE="(-debug%)" 0 kB
[ebuild U ] x11-base/xorg-drivers-1.8 [1.7] INPUT_DEVICES="evdev keyboard mouse -acecad -aiptek -joystick -penmount -synaptics -tslib -virtualbox -vmmouse -void -wacom" VIDEO_CARDS="radeonhd -apm -ark -ast -chips -cirrus -dummy -epson -fbdev -fglrx (-geode) -glint -i128 (-i740) (-impact) -intel -mach64 -mga -neomagic (-newport) -nouveau% -nv -nvidia -r128 -radeon -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vesa -via -virtualbox -vmware (-voodoo) (-xgi)" 0 kB
[ebuild U ] x11-libs/libdrm-2.4.19 [2.4.18_pre20100211-r1] USE="-debug" 419 kB
[ebuild U ] media-libs/mesa-7.8.1 [7.7.1] USE="nptl xcb -debug (-gallium) -motif -pic (-selinux)" VIDEO_CARDS="radeonhd -intel -mach64 -mga -none -nouveau -r128 -radeon -savage -sis -svga -tdfx -via (-sunffb%)" 5,018 kB
[ebuild U ] x11-base/xorg-server-1.8.0 [1.7.6] USE="hal ipv6 kdrive nptl udev%* xorg -dmx -doc% -minimal -static-libs% -tslib (-debug%) (-sdl%*)" 4,978 kB
[ebuild U ] x11-apps/xinit-1.2.1-r2 [1.2.0-r3] USE="minimal pam -debug" 139 kB
[blocks b ] <x11-apps/xinit-1.2.1-r1 ("<x11-apps/xinit-1.2.1-r1" is blocking x11-base/xorg-server-1.8.0)

Total: 6 packages (6 upgrades), Size of downloads: 10,551 kB
Conflict: 1 block

Looks like xinit is blocking xorg-server-1.8....how do i fix this problem so everythig goes smoothly?
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

tliou · Posted: Sun May 30, 2010 7:48 pm Post subject:

At first I thought it was init, which would be pretty risky to change. However, it is xinit, and it looks like its just a block

Do this

emerge -C xinit

then

emerge -av xinit

tliou · Posted: Sun May 30, 2010 7:50 pm Post subject:

Make sure to include this in /etc/portage/package.keywords

VoidMage · Watchman Joined: 14 Oct 2006 Posts: 6196

@tliou:

re-read that portage output

@snakeo2: that's only a soft block, it should emerge just fine.

tliou · Posted: Sun May 30, 2010 8:14 pm Post subject:

Ooops. You're right. emerge away.

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

Voidmage,

I went ahead with the emerge but it crashed at the end:

make[4]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0/hw/xfree86/dri'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0/hw/xfree86'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0/hw/xfree86'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0/hw'
make: *** [all-recursive] Error 1
* ERROR: x11-base/xorg-server-1.8.0 failed:
* Compilation failed
*
* Call stack:
* ebuild.sh, line 54: Called src_compile
* environment, line 3906: Called die
* The specific snippet of code:
* die "Compilation failed";
*
* If you need support, post the output of 'emerge --info =x11-base/xorg-server-1.8.0',
* the complete build log and the output of 'emerge -pqv =x11-base/xorg-server-1.8.0'.
* The complete build log is located at '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/environment'.
* S: '/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0'

>>> Failed to emerge x11-base/xorg-server-1.8.0, Log file:

>>> '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/build.log'
*** Resuming merge...

These are the packages that would be merged, in order:

Calculating dependencies... done!

* Messages for package x11-libs/libdrm-2.4.19:

* libdrm's ABI may have changed without change in library name
* Please rebuild media-libs/mesa, x11-base/xorg-server and
* your video drivers in x11-drivers/*.

* Messages for package x11-base/xorg-server-1.8.0:

* Usage of hal is strongly discouraged. Please migrate to udev.
* From next major release on the hal support will be fully disabled.
* Both hal and udev flags are enabled.
* Enabling only udev!
* ERROR: x11-base/xorg-server-1.8.0 failed:
* Compilation failed
*
* Call stack:
* ebuild.sh, line 54: Called src_compile
* environment, line 3906: Called die
* The specific snippet of code:
* die "Compilation failed";
*
* If you need support, post the output of 'emerge --info =x11-base/xorg-server-1.8.0',
* the complete build log and the output of 'emerge -pqv =x11-base/xorg-server-1.8.0'.
* The complete build log is located at '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/environment'.
* S: '/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0'
[ebuild U ] x11-apps/xinit-1.2.1-r2 [1.2.0-r3] USE="minimal pam -debug" 0 kB
[blocks B ] <x11-base/xorg-server-1.8.0 ("<x11-base/xorg-server-1.8.0" is blocking x11-apps/xinit-1.2.1-r2)

Total: 1 package (1 upgrade), Size of downloads: 0 kB
Conflict: 1 block (1 unsatisfied)

* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.

('installed', '/', 'x11-base/xorg-server-1.7.6', 'nomerge') pulled in by
x11-base/xorg-server required by world

For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked

*
* The following package has failed to build or install:
*
* ('ebuild', '/', 'x11-base/xorg-server-1.8.0', 'merge'), Log file:
* '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/build.log'
*
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

tliou · Posted: Mon May 31, 2010 12:30 am Post subject:

Are those all the errors that you got?

It is interesting that before you were getting a block with a lower case "b" but you are now getting a block with a capital "B" for xinit. This requires the emerge -C, emerge sequence I suggested earlier, but let's see if voidmage responds.

I also see the hal vs udev error on your messages. I assume that you are using both? Hopefully it's just a warning and you can deal with that some other time.

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

Yes. I followed the sequence you suggested and got those errors:

"emerge -C xinit

then

emerge -av xinit"

I'm just finding out that Hal is being faced out and I'm not sure if which one I'm using. I can see I have hal in my use flags:

emerge --info
Portage 2.1.8.3 (default/linux/amd64/10.0/desktop, gcc-4.3.4, glibc-2.10.1-r1, 2.6.31.12-std135-amd64 x86_64)
=================================================================
System uname: Linux-2.6.31.12-std135-amd64-x86_64-AMD_Phenom-tm-_II_X4_940_Processor-with-gentoo-1.12.13
Timestamp of tree: Sat, 29 May 2010 19:00:19 +0000
app-shells/bash: 4.0_p37
dev-java/java-config: 2.1.10
dev-lang/python: 2.5.4-r4, 2.6.5-r2, 3.1.2-r3
dev-python/pycrypto: 2.1.0
dev-util/cmake: 2.6.4-r3
sys-apps/baselayout: 1.12.13
sys-apps/sandbox: 1.6-r2
sys-devel/autoconf: 2.13, 2.65
sys-devel/automake: 1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r3, 1.10.3, 1.11.1
sys-devel/binutils: 2.18-r3
sys-devel/gcc: 4.3.4, 4.4.3-r2
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6b
virtual/os-headers: 2.6.30-r1
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=athlon64 -msse3 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/sandbox.d /etc/splash /etc/terminfo"
CXXFLAGS="-march=athlon64 -msse3 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
EMERGE_DEFAULT_OPTS="--keep-going"
FEATURES="assume-digests distlocks fixpackages news parallel-fetch protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://ftp.gtlib.gatech.edu/pub/gentoo http://www.gtlib.gatech.edu/pub/gentoo ftp://mirror.iawnet.sandia.gov/pub/gentoo/ ftp://ftp.ussg.iu.edu/pub/linux/gentoo ftp://ftp.ucsb.edu/pub/mirrors/linux/gentoo/ http://gentoo.netnitco.net ftp://gentoo.netnitco.net/pub/mirrors/gentoo/source/ http://open-systems.ufl.edu/mirrors/gentoo http://gentoo.llarian.net/ ftp://gentoo.llarian.net/pub/gentoo http://gentoo.binarycompass.org ftp://mirror.datapipe.net/gentoo http://gentoo.cs.lewisu.edu/gentoo/ http://prometheus.cs.wmich.edu/gentoo http://modzer0.cs.uaf.edu/public/gentoo/ "
LANG="en_US.UTF-8"
LDFLAGS="-Wl,-O1"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="(-firebird) 3dnow 3dnowext X a52 aac accessibility acl acpi additions alsa amd64 apache2 audio automount avahi avi berkdb bluetooth branding bzip2 cairo cdr cli consolekit cracklib crypt cups cxx dbus divx4linux dri dts dv dvd dvdr dvdread embedded emboss encode exif fam fame firefox flac fortran fts3 gdbm gif glitz gnome gpm gtk hal howl iconv imap ipv6 jpeg kde kerberos lcms ldap ldapsam libnotify libwww live mad maildir matroska mdnsresponder-compat mikmod mmx mmxext mng modules mp3 mp4 mpeg msyql mudflap multilib ncurses nls nptl nptlonly ogg opengl openmp oss pam pango pcre pdf perl png policykit ppds pppd python qt3support qt4 quicktime readline reflection sasl sdk sdl semantic-desktop session spell spl sql sqlite sse sse2 ssl startup-notification subtitles suexec suid svg swat sysfs tcpd theora tiff truetype unicode usb vda vorbis webkit winbind x264 xanim xcb xml xorg xulrunner xv xvid zlib" ALSA_CARDS="emu10k1" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic auth_digest authn_anon authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache filter headers ident imagemap include info log_config logio mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer proxy_connect proxy_http rewrite setenvif so speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="radeon" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, FFLAGS, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

tliou · Posted: Mon May 31, 2010 12:54 am Post subject:

You have a lot of use flags set. You could try removing hal from your /etc/make.conf. It may still be necessary elsewhere, but here it may be causing a conflict. If you do decide to remove it, you can try to discover where else it might be needed by doing a

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

I went ahead and removed hal from use flags, ran

emerge -av =xorg-server-1.8.0

* IMPORTANT: 13 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild N ] x11-apps/xinit-1.2.1-r2 USE="minimal pam -debug" 0 kB
[ebuild U ] x11-base/xorg-server-1.8.0 [1.7.6] USE="hal ipv6 kdrive nptl udev%* xorg -dmx -doc% -minimal -static-libs% -tslib (-debug%) (-sdl%*)" 0 kB
[blocks b ] <x11-base/xorg-server-1.8.0 ("<x11-base/xorg-server-1.8.0" is blocking x11-apps/xinit-1.2.1-r2)

Total: 2 packages (1 upgrade, 1 new), Size of downloads: 0 kB
Conflict: 1 block

and still showing conflicts.

I also did the following:

emerge -C xinit
* This action can remove important packages! In order to be safer, use
* `emerge -pv --depclean <atom>` to check for reverse dependencies before
* removing packages.

--- Couldn't find 'null/xinit' to unmerge.

>>> No packages selected for removal by unmerge

* IMPORTANT: 13 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.

(chroot) sysresccd / # emerge -av xinit

* IMPORTANT: 13 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild N ] x11-apps/xinit-1.2.1-r2 USE="minimal pam -debug" 0 kB
[blocks B ] <x11-base/xorg-server-1.8.0 ("<x11-base/xorg-server-1.8.0" is blocking x11-apps/xinit-1.2.1-r2)

Total: 1 package (1 new), Size of downloads: 0 kB
Conflict: 1 block (1 unsatisfied)

* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.

('ebuild', '/', 'x11-apps/xinit-1.2.1-r2', 'merge') pulled in by
xinit

('installed', '/', 'x11-base/xorg-server-1.7.6', 'nomerge') pulled in by
x11-base/xorg-server required by world

For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked

should i emerge -C xorg-server-1.8 and try again?
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

VoidMage · Watchman Joined: 14 Oct 2006 Posts: 6196

@snakeo2: it's quite obvious you've failed to post the actual error.
And for the future, use a pastebin.

Also, check 'emerge -upvD --with-bdeps y world', as the chances are
you've missed something (either among protos or libs of xserver)

tliou · Posted: Mon May 31, 2010 1:13 am Post subject:

yes. I also note that hal still seems to be getting pulled in by a use flag

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

@ tliou,

can you be more specific when you say "USE="-hal" emerge?

@ Voidmage,

I posted exactly where the error messages in the code first appeared. I will provide pastebin shortly. Also, here is the output of 'emerge -upvD --with-bdeps y world'

emerge -upvD --with-bdeps y world

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild U ] dev-perl/yaml-0.71 [0.68] 111 kB
[ebuild U ] sys-devel/automake-1.8.5-r4 [1.8.5-r3] 0 kB
[ebuild U ] app-arch/cabextract-1.2-r1 [1.2] USE="-extra-tools%" 0 kB
[ebuild U ] x11-misc/xorg-cf-files-1.0.3 [1.0.2] 335 kB
[ebuild U ] perl-core/ExtUtils-ParseXS-2.22.03 [2.20.0401] 40 kB
[ebuild U ] virtual/perl-ExtUtils-ParseXS-2.22.03 [2.20.0401] 0 kB
[ebuild U ] dev-python/dnspython-1.8.0 [1.7.1] USE="-examples" 107 kB
[ebuild U ] sci-geosciences/googleearth-5.1.3533.1731-r1 [4.2.205.5730] USE="-qt-bundled%" 25,381 kB
[ebuild U ] x11-base/xorg-server-1.8.0 [1.7.6] USE="hal ipv6 kdrive nptl udev%* xorg -dmx -doc% -minimal -static-libs% -tslib (-debug%) (-sdl%*)" 0 kB
[ebuild N ] x11-apps/xinit-1.2.1-r2 USE="minimal pam -debug" 0 kB
[ebuild U ] app-admin/sudo-1.7.2_p6 [1.7.2_p4] USE="ldap pam -offensive (-selinux) -skey" 754 kB

Total: 11 packages (10 upgrades, 1 new), Size of downloads: 26,725 kB
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

tliou · Posted: Mon May 31, 2010 1:26 am Post subject:

Sorry about that,

Try,

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

that didnt work:

libtool: link: x86_64-pc-linux-gnu-gcc -shared .libs/libdri_la-dri.o .libs/libdri_la-drimodule.o .libs/libdri_la-xf86dri.o /usr/lib64/libdrm.so /usr/bin /usr/sbin /bin /sbin -lm -lrt -march=athlon64 -msse3 -Wl,-O1 -Wl,-z -Wl,lazy -Wl,-soname -Wl,libdri.so -o .libs/libdri.so
/usr/bin: file not recognized: Is a directory
collect2: ld returned 1 exit status
make[4]: *** [libdri.la] Error 1
make[4]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0/hw/xfree86/dri'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0/hw/xfree86'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0/hw/xfree86'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0/hw'
make: *** [all-recursive] Error 1
* ERROR: x11-base/xorg-server-1.8.0 failed:
* Compilation failed
*
* Call stack:
* ebuild.sh, line 54: Called src_compile
* environment, line 3906: Called die
* The specific snippet of code:
* die "Compilation failed";
*
* If you need support, post the output of 'emerge --info =x11-base/xorg-server-1.8.0',
* the complete build log and the output of 'emerge -pqv =x11-base/xorg-server-1.8.0'.
* The complete build log is located at '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/environment'.
* S: '/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0'

>>> Failed to emerge x11-base/xorg-server-1.8.0, Log file:

>>> '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/build.log'

* Messages for package x11-base/xorg-server-1.8.0:

* ERROR: x11-base/xorg-server-1.8.0 failed:
* Compilation failed
*
* Call stack:
* ebuild.sh, line 54: Called src_compile
* environment, line 3906: Called die
* The specific snippet of code:
* die "Compilation failed";
*
* If you need support, post the output of 'emerge --info =x11-base/xorg-server-1.8.0',
* the complete build log and the output of 'emerge -pqv =x11-base/xorg-server-1.8.0'.
* The complete build log is located at '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/environment'.
* S: '/var/tmp/portage/x11-base/xorg-server-1.8.0/work/xorg-server-1.8.0'
*
* The following package has failed to build or install:
*
* ('ebuild', '/', 'x11-base/xorg-server-1.8.0', 'merge'), Log file:
* '/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/build.log'
*
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

tliou · Posted: Mon May 31, 2010 1:40 am Post subject:

Would you post this please,

emerge --pretend xorg-server

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

As requested:

emerge --pretend xorg-server

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild N ] x11-base/xorg-server-1.8.0 USE="hal ipv6 kdrive nptl udev xorg -dmx -doc -minimal -static-libs -tslib"

* IMPORTANT: 13 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

tliou · Posted: Mon May 31, 2010 1:48 am Post subject:

OK, post this please?

emerge --info =x11-base/xorg-server-1.8.0

snakeo2 · Veteran Joined: 01 Jan 2006 Posts: 1237

emerge --info =x11-base/xorg-server-1.8.0
Portage 2.1.8.3 (default/linux/amd64/10.0/desktop, gcc-4.3.4, glibc-2.10.1-r1, 2.6.31.12-std135-amd64 x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-2.6.31.12-std135-amd64-x86_64-AMD_Phenom-tm-_II_X4_940_Processor-with-gentoo-1.12.13
Timestamp of tree: Sat, 29 May 2010 19:00:19 +0000
app-shells/bash: 4.0_p37
dev-java/java-config: 2.1.10
dev-lang/python: 2.5.4-r4, 2.6.5-r2, 3.1.2-r3
dev-python/pycrypto: 2.1.0
dev-util/cmake: 2.6.4-r3
sys-apps/baselayout: 1.12.13
sys-apps/sandbox: 1.6-r2
sys-devel/autoconf: 2.13, 2.65
sys-devel/automake: 1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r3, 1.10.3, 1.11.1
sys-devel/binutils: 2.18-r3
sys-devel/gcc: 4.3.4, 4.4.3-r2
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6b
virtual/os-headers: 2.6.30-r1
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=athlon64 -msse3 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/sandbox.d /etc/splash /etc/terminfo"
CXXFLAGS="-march=athlon64 -msse3 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
EMERGE_DEFAULT_OPTS="--keep-going"
FEATURES="assume-digests distlocks fixpackages news parallel-fetch protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://ftp.gtlib.gatech.edu/pub/gentoo http://www.gtlib.gatech.edu/pub/gentoo ftp://mirror.iawnet.sandia.gov/pub/gentoo/ ftp://ftp.ussg.iu.edu/pub/linux/gentoo ftp://ftp.ucsb.edu/pub/mirrors/linux/gentoo/ http://gentoo.netnitco.net ftp://gentoo.netnitco.net/pub/mirrors/gentoo/source/ http://open-systems.ufl.edu/mirrors/gentoo http://gentoo.llarian.net/ ftp://gentoo.llarian.net/pub/gentoo http://gentoo.binarycompass.org ftp://mirror.datapipe.net/gentoo http://gentoo.cs.lewisu.edu/gentoo/ http://prometheus.cs.wmich.edu/gentoo http://modzer0.cs.uaf.edu/public/gentoo/ "
LANG="en_US.UTF-8"
LDFLAGS="-Wl,-O1"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="(-firebird) 3dnow 3dnowext X a52 aac accessibility acl acpi additions alsa amd64 apache2 audio automount avahi avi berkdb bluetooth branding bzip2 cairo cdr cli consolekit cracklib crypt cups cxx dbus divx4linux dri dts dv dvd dvdr dvdread embedded emboss encode exif fam fame firefox flac fortran fts3 gdbm gif glitz gnome gpm gtk hal howl iconv imap ipv6 jpeg kde kerberos lcms ldap ldapsam libnotify libwww live mad maildir matroska mdnsresponder-compat mikmod mmx mmxext mng modules mp3 mp4 mpeg msyql mudflap multilib ncurses nls nptl nptlonly ogg opengl openmp oss pam pango pcre pdf perl png policykit ppds pppd python qt3support qt4 quicktime readline reflection sasl sdk sdl semantic-desktop session spell spl sql sqlite sse sse2 ssl startup-notification subtitles suexec suid svg swat sysfs tcpd theora tiff truetype unicode usb vda vorbis webkit winbind x264 xanim xcb xml xorg xulrunner xv xvid zlib" ALSA_CARDS="emu10k1" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic auth_digest authn_anon authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache filter headers ident imagemap include info log_config logio mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer proxy_connect proxy_http rewrite setenvif so speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="radeon" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, FFLAGS, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
_________________
Gigabyte MA790X-UD4P Motherboard
AMD Phenom II X4 940 Black Edition
MSI ATI R4650 PCIe2
250GB SATA Drive
4GB Corsair DDR2

tliou · Posted: Mon May 31, 2010 2:32 am Post subject:

and this,

/var/tmp/portage/x11-base/xorg-server-1.8.0/temp/build.log

thanks