| View previous topic :: View next topic |
| Author |
Message |
MaDxCrEaM
n00b
Joined: 30 May 2010
Posts: 2
|
 Posted: Sun May 30, 2010 2:23 pm Post subject: Can't get cdrom drives working |
 |
|
I'm on my first Gentoo install and need a little help. I tried a few different kernel options by doing some searching, but still not able to get my cdrom drives recognized. Here are a few outputs that may help:
lspci -k output:
| Quote: | 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
Subsystem: Giga-byte Technology Device 5000
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
Kernel driver in use: pcieport
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
Subsystem: Giga-byte Technology Device 5006
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
Subsystem: Giga-byte Technology Device a002
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
Subsystem: Giga-byte Technology Device 5006
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
Subsystem: Giga-byte Technology Device 5001
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
Subsystem: Giga-byte Technology Device b002
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
Subsystem: Giga-byte Technology Device 5001
Kernel driver in use: i801_smbus
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02)
Subsystem: Giga-byte Technology Device b002
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GT] (rev a2)
Subsystem: Device 196e:053c
Kernel driver in use: nvidia
Kernel modules: nvidia
03:00.0 SATA controller: JMicron Technology Corp. 20360/20363 Serial ATA Controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: ahci
03:00.1 IDE interface: JMicron Technology Corp. 20360/20363 Serial ATA Controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: JMicron IDE
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
Subsystem: Giga-byte Technology Device e000
Kernel driver in use: sky2
|
cat /usr/src/linux-2.6.32-gentoo-r7/.config | egrep "=y" | egrep "SCSI|ATA" output:
| Quote: | CONFIG_RELOCATABLE=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_ATA_SFF=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_SIS=y
CONFIG_DEBUG_RODATA=y
|
cat /etc/udev/rules.d/70-persistent-cd.rules output:
| Quote: | # This file was automatically generated by the /lib64/udev/write_cd_rules
# program, run by the cd-aliases-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and set the $GENERATED variable.
# DVDR_PX-760A (pci-0000:03:00.1-scsi-0:0:1:0)
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1-scsi-0:0:1:0", SYMLINK+="cdrom", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1-scsi-0:0:1:0", SYMLINK+="cdrw", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1-scsi-0:0:1:0", SYMLINK+="dvd", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1-scsi-0:0:1:0", SYMLINK+="dvdrw", ENV{GENERATED}="1"
# DRW-1814BL (pci-0000:03:00.1-scsi-0:0:0:0)
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1-scsi-0:0:0:0", SYMLINK+="cdrom1", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1-scsi-0:0:0:0", SYMLINK+="cdrw1", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1-scsi-0:0:0:0", SYMLINK+="dvd1", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1-scsi-0:0:0:0", SYMLINK+="dvdrw1", ENV{GENERATED}="1"
# PLEXTOR_DVDR_PX-760A (pci-0000:03:00.1)
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1", SYMLINK+="cdrom2", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1", SYMLINK+="cdrw2", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1", SYMLINK+="dvd2", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1", SYMLINK+="dvdrw2", ENV{GENERATED}="1"
# ASUS_DRW-1814BL (pci-0000:03:00.1)
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1", SYMLINK+="cdrom3", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1", SYMLINK+="cdrw3", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1", SYMLINK+="dvd3", ENV{GENERATED}="1"
SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:03:00.1", SYMLINK+="dvdrw3", ENV{GENERATED}="1"
|
Thanks for any help! |
|
| Back to top |
|
 |
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Sun May 30, 2010 2:36 pm Post subject: |
|
|
What about CONFIG_BLK_DEV_SR ?
Anything about your drive in syslog ? |
|
| Back to top |
|
|
MaDxCrEaM
n00b
Joined: 30 May 2010
Posts: 2
|
| Posted: Sun May 30, 2010 2:39 pm Post subject: |
|
|
| VoidMage wrote: | What about CONFIG_BLK_DEV_SR ?
Anything about your drive in syslog ? |
How do I check that, sorry pretty new with this stuff, came from ubuntu. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54848
Location: 56N 3W
|
| Posted: Sun May 30, 2010 4:38 pm Post subject: |
|
|
MaDxCrEaM,
Check your kernel settings against this post
Make friends with the search feature in make menuconfig ... press /
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
