| View previous topic :: View next topic |
| Author |
Message |
Wizumwalt
Guru
Joined: 20 Aug 2006
Posts: 547
|
 Posted: Thu Jun 03, 2010 12:09 pm Post subject: can't mount ntfs |
 |
|
I'm trying to mount a windows XP disk onto linux. I have the drives pulled out of the old machine and plugged in to my USB port via a universal drive adapter kit. Just a few cables that plug into this SATA disk and provide power and connect to USB. When I plug in the drive via usb, a new device appears (/dev/sdc).
| Code: |
$ fdisk -l /dev/sdc
|
... returns nothing. And trying to mount it ...
| Code: |
$ sudo mount -t ntfs /dev/sdc /mnt/win
mount: wrong fs type, bad option, bad superblock on /dev/sdc,
missing codepage or helper program, or other error
(could this be the IDE device where you in fact use
ide-scsi so that sr0 or sda or so is needed?)
In some cases useful info is found in syslog - try
dmesg | tail or so
|
When I plug the device in, this shows up in my dmesg log ...
| Code: |
[ 5918.608054] usb usb1: usb resume
[ 5918.608060] ehci_hcd 0000:00:1a.7: resume root hub
[ 5918.627428] hub 1-0:1.0: hub_resume
[ 5918.627451] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
[ 5918.627455] hub 1-0:1.0: port 4: status 0501 change 0001
[ 5918.728486] hub 1-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 5918.728496] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 5918.779520] ehci_hcd 0000:00:1a.7: port 4 high speed
[ 5918.779525] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
[ 5918.830334] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 5918.881477] ehci_hcd 0000:00:1a.7: port 4 high speed
[ 5918.881482] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
[ 5918.945749] usb 1-4: default language 0x0409
[ 5918.946988] usb 1-4: udev 3, busnum 1, minor = 2
[ 5918.946992] usb 1-4: New USB device found, idVendor=152d, idProduct=2338
[ 5918.946995] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 5918.946998] usb 1-4: Product: USB to ATA/ATAPI Bridge
[ 5918.947000] usb 1-4: Manufacturer: JMicron
[ 5918.947002] usb 1-4: SerialNumber: 152D203380B6
[ 5918.947080] usb 1-4: uevent
[ 5918.947163] usb 1-4: usb_probe_device
[ 5918.947167] usb 1-4: configuration #1 chosen from 1 choice
[ 5918.947798] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
[ 5918.948222] usb 1-4:1.0: uevent
[ 5918.948244] usb-storage 1-4:1.0: usb_probe_interface
[ 5918.948249] usb-storage 1-4:1.0: usb_probe_interface - got id
[ 5918.948326] scsi7 : SCSI emulation for USB Mass Storage devices
[ 5918.948377] usb 1-4: uevent
[ 5918.948413] drivers/usb/core/inode.c: creating file '003'
[ 5918.948433] usb-storage: device found at 3
[ 5918.948435] usb-storage: waiting for device to settle before scanning
[ 5923.947408] scsi 7:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
[ 5923.947666] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 5923.948078] usb-storage: device scan complete
[ 5923.949728] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 5923.949909] usb 1-4:1.0: uevent
[ 5923.950003] usb 1-4: uevent
[ 5923.951458] usb 1-4:1.0: uevent
|
| Code: |
$ sfdisk -l /dev/sdc
Disk /dev/sdc: 0 cylinders, 255 heads, 62 sectors/track
read: Invalid argument
sfdisk: read error on /dev/sdc - cannot read sector 0
/dev/sdc: unrecognized partition table type
No partitions found
|
I've compiled NFTS file system as a module and see this ...
| Code: |
$ lsmod
Module Size Used by
ntfs 78730 0
nvidia 9603619 28
|
Anyone have any ideas here? |
|
| Back to top |
|
 |
[n00b@localhost]
Apprentice
Joined: 30 Aug 2004
Posts: 266
Location: London, UK
|
| Posted: Thu Jun 03, 2010 12:22 pm Post subject: |
|
|
| /dev/sdc is the name of the device. You should be trying to mount /dev/sdc1. |
|
| Back to top |
|
|
Wizumwalt
Guru
Joined: 20 Aug 2006
Posts: 547
|
| Posted: Thu Jun 03, 2010 12:41 pm Post subject: |
|
|
| But I have no /dev/sdc1 device. Only /dev/sdc exists. |
|
| Back to top |
|
|
bobspencer123
Guru
Joined: 19 Dec 2005
Posts: 544
|
| Posted: Thu Jun 03, 2010 3:08 pm Post subject: |
|
|
try emerging ntfs-3g and then mounting.
Also, you may need to compile ntfs support in kernel (I can't remember if ntfs-3g provides kernel based driver or something else).
mount -t ntfs-3g /dev/sdc1 /mnt/point
_________________
Increasingly becoming a 2 channel audio nut! |
|
| Back to top |
|
|
Hu
Administrator
Joined: 06 Mar 2007
Posts: 23082
|
| Posted: Thu Jun 03, 2010 10:11 pm Post subject: |
|
|
| Why are you running fdisk as an unprivileged user? Unless you have udev configured to offer special permissions, you probably need root permission to access the device node. Please run, as root, the commands sfdisk -l /dev/sdc; file -s /dev/sdc; od -tx1z -Ax -N512 /dev/sdc. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
