Pancu l33t
Joined: 16 Feb 2005 Posts: 612 Location: Cesena
|
Posted: Fri Jul 23, 2010 12:24 pm Post subject: Smargo SmartReader installazione |
|
|
Salve ragazzi,
ho bisogno di una mano ad installare il mio Smargo SmartReader USB.
Non capisco se il sistema l'ha riconosciuto e in che posizione virtuale è stato collocato.
Attualmente quando inserisco il lettore USB in una presa del mio server ottengo queste info:
Code: | Jul 23 13:25:31 andreasv kernel: usb 2-9: unregistering device
Jul 23 13:25:31 andreasv kernel: usb 2-9: usb_disable_device nuking all URBs
Jul 23 13:25:31 andreasv kernel: usb 2-9: unregistering interface 2-9:1.0
Jul 23 13:25:31 andreasv kernel: usb 2-9:1.0: uevent
Jul 23 13:25:31 andreasv kernel: usb 2-9: uevent
Jul 23 13:25:31 andreasv kernel: hub 2-0:1.0: debounce: port 9: total 100ms stable 100ms status 0x100
Jul 23 13:25:34 andreasv kernel: usb usb1: usb resume
Jul 23 13:25:34 andreasv kernel: ehci_hcd 0000:00:02.1: resume root hub
Jul 23 13:25:35 andreasv kernel: ehci_hcd 0000:00:02.1: port 9 full speed --> companion
Jul 23 13:25:35 andreasv kernel: ehci_hcd 0000:00:02.1: GetStatus port 9 status 003001 POWER OWNER sig=se0 CONNECT
Jul 23 13:25:35 andreasv kernel: hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0200
Jul 23 13:25:35 andreasv kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [8] = 0x00010101 CSC PPS CCS
Jul 23 13:25:35 andreasv kernel: hub 2-0:1.0: port 9, status 0101, change 0001, 12 Mb/s
Jul 23 13:25:35 andreasv kernel: hub 1-0:1.0: hub_resume
Jul 23 13:25:35 andreasv kernel: hub 2-0:1.0: debounce: port 9: total 100ms stable 100ms status 0x101
Jul 23 13:25:35 andreasv kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [8] = 0x00100103 PRSC PPS PES CCS
Jul 23 13:25:35 andreasv kernel: usb 2-9: new full speed USB device using ohci_hcd and address 9
Jul 23 13:25:40 andreasv kernel: usb 2-9: khubd timed out on ep0in len=0/64
Jul 23 13:25:40 andreasv kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [8] = 0x00100103 PRSC PPS PES CCS
Jul 23 13:25:40 andreasv kernel: usb 2-9: ep0 maxpacket = 8
Jul 23 13:25:40 andreasv kernel: usb 2-9: skipped 3 descriptors after interface
Jul 23 13:25:40 andreasv kernel: usb 2-9: udev 9, busnum 2, minor = 136
Jul 23 13:25:40 andreasv kernel: usb 2-9: New USB device found, idVendor=0403, idProduct=6001
Jul 23 13:25:40 andreasv kernel: usb 2-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul 23 13:25:40 andreasv kernel: usb 2-9: uevent
Jul 23 13:25:40 andreasv kernel: usb 2-9: usb_probe_device
Jul 23 13:25:40 andreasv kernel: usb 2-9: configuration #1 chosen from 1 choice
Jul 23 13:25:40 andreasv kernel: usb 2-9: uevent
Jul 23 13:25:40 andreasv kernel: usb 2-9: adding 2-9:1.0 (config #1, interface 0)
Jul 23 13:25:40 andreasv kernel: usb 2-9: default language 0x0409
Jul 23 13:25:40 andreasv kernel: usb 2-9:1.0: uevent
Jul 23 13:25:40 andreasv kernel: drivers/usb/core/inode.c: creating file '009'
Jul 23 13:25:40 andreasv kernel: hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000
Jul 23 13:25:40 andreasv kernel: hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0200
Jul 23 13:25:43 andreasv kernel: hub 1-0:1.0: hub_suspend
Jul 23 13:25:43 andreasv kernel: usb usb1: bus auto-suspend
Jul 23 13:25:43 andreasv kernel: ehci_hcd 0000:00:02.1: suspend root hub |
Questo mi pare di capire che significa che non è stato riconosciuto.
Giusto?? |
|