| View previous topic :: View next topic |
| Author |
Message |
ndee
n00b
Joined: 12 Feb 2011
Posts: 8
|
 Posted: Sat Feb 12, 2011 5:50 pm Post subject: Awesome-WM not working |
 |
|
Hello,
I am trying to install Awesome-WM however whenever I start it, whether with SLiM, startx, or xinit (yes, I do have it in .xinitrc), I get a black screen.
And whenever I Ctrl-C to exit, I get an error saying: "E: awesome: main:392: cannot open display".
No one on #gentoo, so far, was able to help me. So, I decided to post a thread.
I wasn't sure what to attach or whatnot, so tell me if you need anything.
Thanks.
Last edited by ndee on Sun Feb 13, 2011 3:39 pm; edited 1 time in total |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54304
Location: 56N 3W
|
| Posted: Sat Feb 12, 2011 6:46 pm Post subject: |
|
|
ndee,
Welcome to Gentoo.
I'm not an Awesome-WM user, but from your error message it may be an Xorg issue. I can help you check that.
Please post your xorg.conf file if you have one and your /var/log/Xorg.0.log file.
This will allow us to check your Xorg. If this looks good, we will test with a very simple window manager before getting back to Awesome.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
ndee
n00b
Joined: 12 Feb 2011
Posts: 8
|
| Posted: Sat Feb 12, 2011 7:04 pm Post subject: |
|
|
It isn't a Xorg issue since fluxbox/anything else works just fine.
Pretty sure it's just awesome-wm related.
(also, it's ahandy from IRC. Heh, problems don't stop  ) |
|
| Back to top |
|
|
norg
Tux's lil' helper
Joined: 23 Aug 2010
Posts: 104
Location: Augsburg (Germany)
|
| Posted: Sat Feb 12, 2011 8:04 pm Post subject: |
|
|
can you post your .xinitrc please?
and what versions of awesome, xorg etc. are you using?
with a blank config you should at least see the bar etc and open terminals with mod+enter |
|
| Back to top |
|
|
ndee
n00b
Joined: 12 Feb 2011
Posts: 8
|
| Posted: Sat Feb 12, 2011 8:06 pm Post subject: |
|
|
It was "exec awesome" before I had SLiM and fluxbox. Right now it's exec startfluxbox. But back then it didn't work too.
I can't find .config/awesome/ though, been told it should be there.
Xorg-x11 7.4
Awesome 3.4.9 |
|
| Back to top |
|
|
norg
Tux's lil' helper
Joined: 23 Aug 2010
Posts: 104
Location: Augsburg (Germany)
|
| Posted: Sat Feb 12, 2011 8:51 pm Post subject: |
|
|
try | Code: | | cp /etc/xdg/awesome/rc.lua .config/awesome/rc.lua |
|
|
| Back to top |
|
|
ndee
n00b
Joined: 12 Feb 2011
Posts: 8
|
| Posted: Sat Feb 12, 2011 9:28 pm Post subject: |
|
|
No it did not work.
Please help me, really need to get this over with!
Thanks  |
|
| Back to top |
|
|
norg
Tux's lil' helper
Joined: 23 Aug 2010
Posts: 104
Location: Augsburg (Germany)
|
| Posted: Sat Feb 12, 2011 10:21 pm Post subject: |
|
|
Well i'm not sure what you did, since a plain awesome wm should always work when Xorg is fine.
Show your Xorg.log after you tried to start awesome and stopped it. |
|
| Back to top |
|
|
smileyguy
Tux's lil' helper
Joined: 26 Dec 2004
Posts: 80
|
| Posted: Sat Feb 12, 2011 10:43 pm Post subject: |
|
|
| ndee wrote: | It isn't a Xorg issue since fluxbox/anything else works just fine.
Pretty sure it's just awesome-wm related.
|
Awesome uses xcb. I don't think fluxbox does. The error is happening in xcb_connect. I would not rule out an xcb error outside of awesome. Does
tell you the config file is okay? Is your DISPLAY environment variable set to anything unusual?
I started awesome 3.4.8 on xorg 1.9.2 with no trouble. It looks like 3.4.9 is still marked unstable. Have you tried dropping back to the stable version? |
|
| Back to top |
|
|
norg
Tux's lil' helper
Joined: 23 Aug 2010
Posts: 104
Location: Augsburg (Germany)
|
| Posted: Sat Feb 12, 2011 11:25 pm Post subject: |
|
|
| smileyguy wrote: | | I started awesome 3.4.8 on xorg 1.9.2 with no trouble. It looks like 3.4.9 is still marked unstable. Have you tried dropping back to the stable version? |
3.4.9 is working fine here |
|
| Back to top |
|
|
ndee
n00b
Joined: 12 Feb 2011
Posts: 8
|
| Posted: Sun Feb 13, 2011 8:46 am Post subject: |
|
|
$DISPLAY says :O.O
awesome -k says the configuration is OK.
Really weird :/
| Quote: |
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.9.3.902 (1.9.4 RC 2)
Release Date: 2011-01-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo x86_64 Gentoo
Current Operating System: Linux andy.awesome.wut 2.6.37-gentoo #7 SMP Fri Feb 11 07:31:10 EET 2011 x86_64
Kernel command line:
Build Date: 11 February 2011 09:09:25AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 13 00:47:14 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
resize called 1280 1024
xinit: connection to X server lost
waiting for X server to shut down E: awesome: main:392: cannot open display
xinit: unexpected signal 2 |
^ is what I see in the console when I start it and then Ctrl-C.
And this is the log:
| Quote: | [ 200.902]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 200.902]
X.Org X Server 1.9.3.902 (1.9.4 RC 2)
Release Date: 2011-01-30
[ 200.902] X Protocol Version 11, Revision 0
[ 200.902] Build Operating System: Linux 2.6.37-gentoo x86_64 Gentoo
[ 200.902] Current Operating System: Linux andy.awesome.wut 2.6.37-gentoo #7 SMP Fri Feb 11 07:31:10 EET 2011 x86_64
[ 200.902] Kernel command line:
[ 200.902] Build Date: 11 February 2011 09:09:25AM
[ 200.902]
[ 200.902] Current version of pixman: 0.20.2
[ 200.902] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 200.902] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 200.902] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 13 00:47:31 2011
[ 200.902] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 200.902] (==) No Layout section. Using the first Screen section.
[ 200.902] (==) No screen section available. Using defaults.
[ 200.902] (**) |-->Screen "Default Screen Section" (0)
[ 200.902] (**) | |-->Monitor "<default monitor>"
[ 200.902] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 200.902] (==) Automatically adding devices
[ 200.902] (==) Automatically enabling devices
[ 200.902] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 200.902] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 200.902] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 200.902] (II) Loader magic: 0x7cc140
[ 200.902] (II) Module ABI versions:
[ 200.902] X.Org ANSI C Emulation: 0.4
[ 200.902] X.Org Video Driver: 8.0
[ 200.902] X.Org XInput driver : 11.0
[ 200.902] X.Org Server Extension : 4.0
[ 200.903] (--) PCI:*(0:1:0:0) 10de:0622:1acc:961d rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 200.903] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 200.903] (II) LoadModule: "extmod"
[ 200.903] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 200.903] (II) Module extmod: vendor="X.Org Foundation"
[ 200.903] compiled for 1.9.3.902, module version = 1.0.0
[ 200.903] Module class: X.Org Server Extension
[ 200.903] ABI class: X.Org Server Extension, version 4.0
[ 200.903] (II) Loading extension MIT-SCREEN-SAVER
[ 200.903] (II) Loading extension XFree86-VidModeExtension
[ 200.903] (II) Loading extension XFree86-DGA
[ 200.903] (II) Loading extension DPMS
[ 200.903] (II) Loading extension XVideo
[ 200.903] (II) Loading extension XVideo-MotionCompensation
[ 200.903] (II) Loading extension X-Resource
[ 200.903] (II) LoadModule: "dbe"
[ 200.903] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 200.903] (II) Module dbe: vendor="X.Org Foundation"
[ 200.903] compiled for 1.9.3.902, module version = 1.0.0
[ 200.903] Module class: X.Org Server Extension
[ 200.903] ABI class: X.Org Server Extension, version 4.0
[ 200.903] (II) Loading extension DOUBLE-BUFFER
[ 200.903] (II) LoadModule: "glx"
[ 200.903] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 200.903] (II) Module glx: vendor="X.Org Foundation"
[ 200.903] compiled for 1.9.3.902, module version = 1.0.0
[ 200.903] ABI class: X.Org Server Extension, version 4.0
[ 200.903] (==) AIGLX enabled
[ 200.903] (II) Loading extension GLX
[ 200.903] (II) LoadModule: "record"
[ 200.903] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 200.903] (II) Module record: vendor="X.Org Foundation"
[ 200.903] compiled for 1.9.3.902, module version = 1.13.0
[ 200.903] Module class: X.Org Server Extension
[ 200.903] ABI class: X.Org Server Extension, version 4.0
[ 200.903] (II) Loading extension RECORD
[ 200.903] (II) LoadModule: "dri"
[ 200.903] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 200.904] (II) Module dri: vendor="X.Org Foundation"
[ 200.904] compiled for 1.9.3.902, module version = 1.0.0
[ 200.904] ABI class: X.Org Server Extension, version 4.0
[ 200.904] (II) Loading extension XFree86-DRI
[ 200.904] (II) LoadModule: "dri2"
[ 200.904] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 200.904] (II) Module dri2: vendor="X.Org Foundation"
[ 200.904] compiled for 1.9.3.902, module version = 1.2.0
[ 200.904] ABI class: X.Org Server Extension, version 4.0
[ 200.904] (II) Loading extension DRI2
[ 200.904] (==) Matched nouveau as autoconfigured driver 0
[ 200.904] (==) Matched vesa as autoconfigured driver 1
[ 200.904] (==) Matched fbdev as autoconfigured driver 2
[ 200.904] (==) Assigned the driver to the xf86ConfigLayout
[ 200.904] (II) LoadModule: "nouveau"
[ 200.904] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 200.904] (II) Module nouveau: vendor="X.Org Foundation"
[ 200.904] compiled for 1.9.3.902, module version = 0.0.16
[ 200.904] Module class: X.Org Video Driver
[ 200.904] ABI class: X.Org Video Driver, version 8.0
[ 200.904] (II) LoadModule: "vesa"
[ 200.904] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 200.904] (II) Module vesa: vendor="X.Org Foundation"
[ 200.904] compiled for 1.9.3.902, module version = 2.3.0
[ 200.904] Module class: X.Org Video Driver
[ 200.904] ABI class: X.Org Video Driver, version 8.0
[ 200.904] (II) LoadModule: "fbdev"
[ 200.904] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 200.904] (II) Module fbdev: vendor="X.Org Foundation"
[ 200.904] compiled for 1.9.3.902, module version = 0.4.2
[ 200.904] ABI class: X.Org Video Driver, version 8.0
[ 200.904] (II) NOUVEAU driver
[ 200.904] (II) NOUVEAU driver for NVIDIA chipset families :
[ 200.904] RIVA TNT (NV04)
[ 200.904] RIVA TNT2 (NV05)
[ 200.904] GeForce 256 (NV10)
[ 200.904] GeForce 2 (NV11, NV15)
[ 200.904] GeForce 4MX (NV17, NV18)
[ 200.904] GeForce 3 (NV20)
[ 200.904] GeForce 4Ti (NV25, NV28)
[ 200.904] GeForce FX (NV3x)
[ 200.904] GeForce 6 (NV4x)
[ 200.904] GeForce 7 (G7x)
[ 200.904] GeForce 8 (G8x)
[ 200.904] (II) VESA: driver for VESA chipsets: vesa
[ 200.904] (II) FBDEV: driver for framebuffer: fbdev
[ 200.904] (++) using VT number 7
[ 200.906] drmOpenDevice: node name is /dev/dri/card0
[ 200.906] drmOpenDevice: open result is 7, (OK)
[ 200.906] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 200.906] drmOpenDevice: node name is /dev/dri/card0
[ 200.906] drmOpenDevice: open result is 7, (OK)
[ 200.906] drmOpenByBusid: drmOpenMinor returns 7
[ 200.906] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 200.906] (II) [drm] nouveau interface version: 0.0.16
[ 200.906] (WW) Falling back to old probe method for vesa
[ 200.906] (WW) Falling back to old probe method for fbdev
[ 200.906] (II) Loading sub module "fbdevhw"
[ 200.906] (II) LoadModule: "fbdevhw"
[ 200.906] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 200.906] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 200.906] compiled for 1.9.3.902, module version = 0.0.2
[ 200.906] ABI class: X.Org Video Driver, version 8.0
[ 200.906] (II) Loading sub module "dri"
[ 200.906] (II) LoadModule: "dri"
[ 200.906] (II) Reloading /usr/lib64/xorg/modules/extensions/libdri.so
[ 200.906] (II) NOUVEAU(0): Loaded DRI module
[ 200.906] drmOpenDevice: node name is /dev/dri/card0
[ 200.906] drmOpenDevice: open result is 8, (OK)
[ 200.906] drmOpenDevice: node name is /dev/dri/card0
[ 200.906] drmOpenDevice: open result is 8, (OK)
[ 200.906] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 200.906] drmOpenDevice: node name is /dev/dri/card0
[ 200.906] drmOpenDevice: open result is 8, (OK)
[ 200.906] drmOpenByBusid: drmOpenMinor returns 8
[ 200.906] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 200.906] (II) [drm] DRM interface version 1.4
[ 200.906] (II) [drm] DRM open master succeeded.
[ 200.906] (--) NOUVEAU(0): Chipset: "NVIDIA NV94"
[ 200.906] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 200.906] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 200.906] (==) NOUVEAU(0): RGB weight 888
[ 200.906] (==) NOUVEAU(0): Default visual is TrueColor
[ 200.906] (==) NOUVEAU(0): Using HW cursor
[ 200.906] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 201.013] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 201.127] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 201.233] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 201.347] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 201.347] (II) NOUVEAU(0): Manufacturer: GSM Model: 448c Serial#: 142041
[ 201.347] (II) NOUVEAU(0): Year: 2008 Week: 11
[ 201.347] (II) NOUVEAU(0): EDID Version: 1.3
[ 201.347] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 201.347] (II) NOUVEAU(0): Sync: Separate SyncOnGreen
[ 201.347] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 201.347] (II) NOUVEAU(0): Gamma: 2.20
[ 201.347] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 201.347] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 201.347] (II) NOUVEAU(0): redX: 0.637 redY: 0.343 greenX: 0.297 greenY: 0.615
[ 201.347] (II) NOUVEAU(0): blueX: 0.145 blueY: 0.069 whiteX: 0.312 whiteY: 0.329
[ 201.347] (II) NOUVEAU(0): Supported established timings:
[ 201.347] (II) NOUVEAU(0): 720x400@70Hz
[ 201.347] (II) NOUVEAU(0): 640x480@60Hz
[ 201.347] (II) NOUVEAU(0): 640x480@75Hz
[ 201.347] (II) NOUVEAU(0): 800x600@60Hz
[ 201.347] (II) NOUVEAU(0): 800x600@75Hz
[ 201.347] (II) NOUVEAU(0): 832x624@75Hz
[ 201.347] (II) NOUVEAU(0): 1024x768@60Hz
[ 201.347] (II) NOUVEAU(0): 1024x768@75Hz
[ 201.347] (II) NOUVEAU(0): 1280x1024@75Hz
[ 201.347] (II) NOUVEAU(0): 1152x864@75Hz
[ 201.347] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 201.347] (II) NOUVEAU(0): Supported standard timings:
[ 201.347] (II) NOUVEAU(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 201.347] (II) NOUVEAU(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 201.347] (II) NOUVEAU(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 201.347] (II) NOUVEAU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 201.347] (II) NOUVEAU(0): Supported detailed timing:
[ 201.347] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 201.348] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 201.348] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 201.348] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 201.348] (II) NOUVEAU(0): Monitor name: L1754
[ 201.348] (II) NOUVEAU(0): Monitor name:
[ 201.348] (II) NOUVEAU(0): EDID (in hex):
[ 201.348] (II) NOUVEAU(0): 00ffffffffffff001e6d8c44d92a0200
[ 201.348] (II) NOUVEAU(0): 0b1201036a221b78ea3231a3574c9d25
[ 201.348] (II) NOUVEAU(0): 115054a56b80314f454f614f81800101
[ 201.348] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 201.348] (II) NOUVEAU(0): 1300520e1100001e000000fd00384b1e
[ 201.348] (II) NOUVEAU(0): 530e000a202020202020000000fc004c
[ 201.348] (II) NOUVEAU(0): 313735340a20202020202020000000fc
[ 201.348] (II) NOUVEAU(0): 00200a202020202020202020202000be
[ 201.348] (II) NOUVEAU(0): Printing probed modes for output DVI-I-2
[ 201.348] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 201.348] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 201.348] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 201.348] (II) NOUVEAU(0): Output DVI-I-2 connected
[ 201.348] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 201.348] (II) NOUVEAU(0): Output DVI-I-2 using initial mode 1280x1024
[ 201.348] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 201.348] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 201.348] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 201.348] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 201.348] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 201.348] (==) NOUVEAU(0): DPI set to (96, 96)
[ 201.348] (II) Loading sub module "fb"
[ 201.348] (II) LoadModule: "fb"
[ 201.348] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 201.348] (II) Module fb: vendor="X.Org Foundation"
[ 201.348] compiled for 1.9.3.902, module version = 1.0.0
[ 201.348] ABI class: X.Org ANSI C Emulation, version 0.4
[ 201.348] (II) Loading sub module "exa"
[ 201.348] (II) LoadModule: "exa"
[ 201.348] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 201.348] (II) Module exa: vendor="X.Org Foundation"
[ 201.348] compiled for 1.9.3.902, module version = 2.5.0
[ 201.348] ABI class: X.Org Video Driver, version 8.0
[ 201.348] (II) Loading sub module "shadowfb"
[ 201.348] (II) LoadModule: "shadowfb"
[ 201.348] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 201.348] (II) Module shadowfb: vendor="X.Org Foundation"
[ 201.348] compiled for 1.9.3.902, module version = 1.0.0
[ 201.348] ABI class: X.Org ANSI C Emulation, version 0.4
[ 201.348] (II) UnloadModule: "vesa"
[ 201.348] (II) Unloading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 201.348] (II) UnloadModule: "fbdev"
[ 201.348] (II) Unloading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 201.348] (II) UnloadModule: "fbdevhw"
[ 201.348] (II) Unloading /usr/lib64/xorg/modules/libfbdevhw.so
[ 201.349] (--) Depth 24 pixmap format is 32 bpp
[ 201.361] (II) NOUVEAU(0): Opened GPU channel 2
[ 201.361] (II) NOUVEAU(0): [DRI2] Setup complete
[ 201.361] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 201.361] (II) NOUVEAU(0): GART: 512MiB available
[ 201.363] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 201.363] (II) EXA(0): Driver allocated offscreen pixmaps
[ 201.363] (II) EXA(0): Driver registered support for the following operations:
[ 201.363] (II) Solid
[ 201.363] (II) Copy
[ 201.363] (II) Composite (RENDER acceleration)
[ 201.363] (II) UploadToScreen
[ 201.363] (II) DownloadFromScreen
[ 201.363] (==) NOUVEAU(0): Backing store disabled
[ 201.363] (==) NOUVEAU(0): Silken mouse enabled
[ 201.363] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 201.363] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 201.363] (==) NOUVEAU(0): DPMS enabled
[ 201.363] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 201.363] (--) RandR disabled
[ 201.364] (II) Initializing built-in extension Generic Event Extension
[ 201.364] (II) Initializing built-in extension SHAPE
[ 201.364] (II) Initializing built-in extension MIT-SHM
[ 201.364] (II) Initializing built-in extension XInputExtension
[ 201.364] (II) Initializing built-in extension XTEST
[ 201.364] (II) Initializing built-in extension BIG-REQUESTS
[ 201.364] (II) Initializing built-in extension SYNC
[ 201.364] (II) Initializing built-in extension XKEYBOARD
[ 201.364] (II) Initializing built-in extension XC-MISC
[ 201.364] (II) Initializing built-in extension XINERAMA
[ 201.364] (II) Initializing built-in extension XFIXES
[ 201.364] (II) Initializing built-in extension RENDER
[ 201.364] (II) Initializing built-in extension RANDR
[ 201.364] (II) Initializing built-in extension COMPOSITE
[ 201.364] (II) Initializing built-in extension DAMAGE
[ 201.382] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 201.382] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 201.382] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 201.382] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 201.382] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 201.382] (II) AIGLX: Loaded and initialized /usr/lib64/dri/nouveau_dri.so
[ 201.382] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 201.383] (II) NOUVEAU(0): NVEnterVT is called.
[ 201.383] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 201.383] resize called 1280 1024
[ 201.440] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 201.440] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 201.440] (II) LoadModule: "evdev"
[ 201.441] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 201.441] (II) Module evdev: vendor="X.Org Foundation"
[ 201.441] compiled for 1.9.3.902, module version = 2.6.0
[ 201.441] Module class: X.Org XInput Driver
[ 201.441] ABI class: X.Org XInput driver, version 11.0
[ 201.441] (**) Power Button: always reports core events
[ 201.441] (**) Power Button: Device: "/dev/input/event1"
[ 201.448] (--) Power Button: Found keys
[ 201.448] (II) Power Button: Configuring as keyboard
[ 201.448] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 201.448] (**) Option "xkb_rules" "evdev"
[ 201.448] (**) Option "xkb_model" "evdev"
[ 201.448] (**) Option "xkb_layout" "us"
[ 201.462] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 201.462] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 201.462] (**) Power Button: always reports core events
[ 201.462] (**) Power Button: Device: "/dev/input/event0"
[ 201.473] (--) Power Button: Found keys
[ 201.473] (II) Power Button: Configuring as keyboard
[ 201.473] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 201.473] (**) Option "xkb_rules" "evdev"
[ 201.473] (**) Option "xkb_model" "evdev"
[ 201.473] (**) Option "xkb_layout" "us"
[ 201.474] (II) config/udev: Adding input device Genius 4D Scroll Mouse (/dev/input/event3)
[ 201.474] (**) Genius 4D Scroll Mouse: Applying InputClass "evdev pointer catchall"
[ 201.474] (**) Genius 4D Scroll Mouse: always reports core events
[ 201.474] (**) Genius 4D Scroll Mouse: Device: "/dev/input/event3"
[ 201.480] (--) Genius 4D Scroll Mouse: Found 3 mouse buttons
[ 201.480] (--) Genius 4D Scroll Mouse: Found scroll wheel(s)
[ 201.480] (--) Genius 4D Scroll Mouse: Found relative axes
[ 201.480] (--) Genius 4D Scroll Mouse: Found x and y relative axes
[ 201.480] (II) Genius 4D Scroll Mouse: Configuring as mouse
[ 201.480] (II) Genius 4D Scroll Mouse: Adding scrollwheel support
[ 201.480] (**) Genius 4D Scroll Mouse: YAxisMapping: buttons 4 and 5
[ 201.480] (**) Genius 4D Scroll Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 201.480] (II) XINPUT: Adding extended input device "Genius 4D Scroll Mouse" (type: MOUSE)
[ 201.480] (**) Genius 4D Scroll Mouse: (accel) keeping acceleration scheme 1
[ 201.480] (**) Genius 4D Scroll Mouse: (accel) acceleration profile 0
[ 201.480] (**) Genius 4D Scroll Mouse: (accel) acceleration factor: 2.000
[ 201.480] (**) Genius 4D Scroll Mouse: (accel) acceleration threshold: 4
[ 201.480] (II) Genius 4D Scroll Mouse: initialized for relative axes.
[ 201.480] (II) config/udev: Adding input device Genius 4D Scroll Mouse (/dev/input/mouse0)
[ 201.480] (II) No input driver/identifier specified (ignoring)
[ 201.480] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event4)
[ 201.480] (**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 201.480] (**) CHICONY USB Keyboard: always reports core events
[ 201.480] (**) CHICONY USB Keyboard: Device: "/dev/input/event4"
[ 201.488] (--) CHICONY USB Keyboard: Found keys
[ 201.488] (II) CHICONY USB Keyboard: Configuring as keyboard
[ 201.488] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD)
[ 201.488] (**) Option "xkb_rules" "evdev"
[ 201.488] (**) Option "xkb_model" "evdev"
[ 201.488] (**) Option "xkb_layout" "us"
[ 201.488] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event5)
[ 201.488] (**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 201.488] (**) CHICONY USB Keyboard: always reports core events
[ 201.488] (**) CHICONY USB Keyboard: Device: "/dev/input/event5"
[ 201.496] (--) CHICONY USB Keyboard: Found keys
[ 201.496] (II) CHICONY USB Keyboard: Configuring as keyboard
[ 201.496] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD)
[ 201.496] (**) Option "xkb_rules" "evdev"
[ 201.496] (**) Option "xkb_model" "evdev"
[ 201.496] (**) Option "xkb_layout" "us"
[ 201.496] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event2)
[ 201.496] (II) No input driver/identifier specified (ignoring) |
|
|
| Back to top |
|
|
norg
Tux's lil' helper
Joined: 23 Aug 2010
Posts: 104
Location: Augsburg (Germany)
|
| Posted: Sun Feb 13, 2011 12:13 pm Post subject: |
|
|
| Hmm try an older Xorg Server version and maybe the nvidia binary drivers instead of noveau, just for testing. |
|
| Back to top |
|
|
ndee
n00b
Joined: 12 Feb 2011
Posts: 8
|
| Posted: Sun Feb 13, 2011 2:25 pm Post subject: |
|
|
Tried them all. Still having the same problem :/
Any idea? |
|
| Back to top |
|
|
jormartr
Apprentice
Joined: 02 Jan 2008
Posts: 174
|
| Posted: Sun Feb 13, 2011 2:47 pm Post subject: |
|
|
Try with
$HOME/.xinitrc
and once X is loaded, with an xterm inside, run on the xterm awesome, and see what happens. |
|
| Back to top |
|
|
ndee
n00b
Joined: 12 Feb 2011
Posts: 8
|
| Posted: Sun Feb 13, 2011 2:55 pm Post subject: |
|
|
| Nope. I got a black screen with a cursor (shaped like an X). |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54304
Location: 56N 3W
|
| Posted: Sun Feb 13, 2011 3:22 pm Post subject: |
|
|
ndee,
Thats Xorg running with no window manager. I suppose you have found the Wiki Page
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
ndee
n00b
Joined: 12 Feb 2011
Posts: 8
|
| Posted: Sun Feb 13, 2011 3:32 pm Post subject: |
|
|
NeddySeagoon:
I know that, I just mean when I start awesome inside of xterm, I get that black screen. So I wonder why it isn't running :/ |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
