View previous topic :: View next topic |
Author |
Message |
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
Posted: Wed Mar 30, 2011 12:11 pm Post subject: |
|
|
DONAHUE wrote: | very likely memory/swap shortage then. |
I deleted -pipe from /etc/make.conf and it looks that emerge gcc completed successfully with some warnings. find below the warnings
Code: | Completed installing gcc-4.4.5 into /var/tmp/portage/sys-devel/gcc-4.4.5/image/
ecompressdir: bzip2 -9 /usr/share/gcc-data/i686-pc-linux-gnu/4.4.5/man
ecompressdir: bzip2 -9 /usr/share/gcc-data/i686-pc-linux-gnu/4.4.5/info
* QA Notice: Package has poor programming practices which may compile
* fine but exhibit random runtime failures.
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:321: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:322: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:677: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:795: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:843: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:321: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:322: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:677: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:795: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:843: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:321: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:322: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:677: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:795: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:843: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:321: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:322: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:677: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:795: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:843: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:321: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:322: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:677: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:795: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:843: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:321: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:322: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:677: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:795: warning: dereferencing type-punned pointer will break strict-aliasing rules
* /var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5/libgcc/../gcc/unwind-dw2-fde.c:843: warning: dereferencing type-punned pointer will break strict-aliasing rules
* Please do not file a Gentoo bug and instead report the above QA
* issues directly to the upstream developers of this software.
* Homepage: http://gcc.gnu.org/
>>> Installing (1 of 1) sys-devel/gcc-4.4.5
* Switching native-compiler to i686-pc-linux-gnu-4.4.5 ... [ ok ]
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
>>> Recording sys-devel/gcc in "world" favorites file...
* Messages for package sys-devel/gcc-4.4.5:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
>>> Auto-cleaning packages...
>>> No outdated packages were found on your system.
* Regenerating GNU info directory index...
* Processed 7 info files.
|
I am ok to proceed or the warnings are to take into consideration?
Tnx |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Wed Mar 30, 2011 1:58 pm Post subject: |
|
|
the programming practices warnings are very common and seem pretty much meaningless as far as we users are concerned. Recommend continue with Code: | emerge -e --keep-going system |
_________________ Defund the FCC. |
|
Back to top |
|
|
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
Posted: Thu Mar 31, 2011 11:38 am Post subject: |
|
|
exited with errors what do you suggest to do?
Code: | gtkmain.c:41:21: error: windows.h: No such file or directory
gtkmain.c:51:56: error: gt_t *ges. These _t *ges. These kversion.h: No such
file or directory
gtkmain.c:201: error: 'GTK_MAJOR_VERSION' undeclared here (not in a function)
gtkmain.c:202: error: 'GTK_MINOR_VERSION' undeclared here (not in a function)
gtkmain.c:203: error: 'GTK_MICRO_VERSION' undeclared here (not in a function)
gtkmain.c:204: error: 'GTK_BINARY_AGE' undeclared here (not in a function)
gtkmain.c:205: error: 'GTK_INTERFACE_AGE' undeclared here (not in a function)
make[4]: *** [gtkmain.lo] Error 1
make[4]: *** Waiting for unfinished jobs....
mv -f .deps/gtkliststore.Tpo .deps/gtkliststore.Plo
make[4]: Leaving directory
`/var/tmp/portage/x11-libs/gtk+-2.22.1-r1/work/gtk+-2.22.1/gtk'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory
`/var/tmp/portage/x11-libs/gtk+-2.22.1-r1/work/gtk+-2.22.1/gtk'
make[2]: *** [all] Error 2
make[2]: Leaving directory
`/var/tmp/portage/x11-libs/gtk+-2.22.1-r1/work/gtk+-2.22.1/gtk'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/var/tmp/portage/x11-libs/gtk+-2.22.1-r1/work/gtk+-2.22.1'
make: *** [all] Error 2
emake failed
* ERROR: x11-libs/gtk+-2.22.1-r1 failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 5682: Called _eapi2_src_compile
* ebuild.sh, line 665: Called die
* The specific snippet of code:
* emake || die "emake failed"
*
* If you need support, post the output of 'emerge --info
=x11-libs/gtk+-2.22.1-r1',
* the complete build log and the output of 'emerge -pqv
=x11-libs/gtk+-2.22.1-r1'.
* The complete build log is located at
'/var/tmp/portage/x11-libs/gtk+-2.22.1-r1/temp/build.log'.
* The ebuild environment file is located at
'/var/tmp/portage/x11-libs/gtk+-2.22.1-r1/temp/environment'.
* S: '/var/tmp/portage/x11-libs/gtk+-2.22.1-r1/work/gtk+-2.22.1'
(chroot) sysresccd / # |
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Thu Mar 31, 2011 12:56 pm Post subject: |
|
|
Code: | emerge -e --keep-going --resume system |
Would be a typo either in the command issued or in your report here
if you get "nothing to resume" redo Code: | emerge -e --keep-going system |
_________________ Defund the FCC. |
|
Back to top |
|
|
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
Posted: Thu Mar 31, 2011 1:03 pm Post subject: |
|
|
Quote: | Would be a typo either in the command issued or in your report here |
yes that's a typo here on the forum
the command issued was |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Thu Mar 31, 2011 1:19 pm Post subject: |
|
|
the --keepgoing and --resume make it easier to work through until the entire content of system has been redone
actually it may be more efficient to wipe the gentoo partitions and do the install over. _________________ Defund the FCC. |
|
Back to top |
|
|
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
Posted: Sat Apr 02, 2011 10:10 am Post subject: |
|
|
I did Code: | emerge -e --keep-going --resume system | and without errors but I got the following error message
Code: | (chroot) sysresccd / # USE="symlink" emerge =sys-kernel/gentoo-sources-2.6.36-gentoo-r5
!!! '=sys-kernel/gentoo-sources-2.6.36-gentoo-r5' is not a valid package atom.
!!! Please check ebuild(5) for full details.
|
what does it mean?
Tnx |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Sat Apr 02, 2011 3:26 pm Post subject: |
|
|
typo, try Code: | emerge =sys-kernel/gentoo-sources-2.6.36-r5 |
then run Code: | eselect kernel list | wgetpaste
ls -l /usr/src | wgetpaste | and post url's returned
need to check names on the kernel source directories _________________ Defund the FCC. |
|
Back to top |
|
|
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Sun Apr 03, 2011 1:46 am Post subject: |
|
|
looks good.
boot sysresccd, enter the chroot, mount the gentoo partitions, then: Quote: | You first need to select your timezone so that your system knows where it is located. Look for your timezone in /usr/share/zoneinfo, then copy it to /etc/localtime. Please avoid the /usr/share/zoneinfo/Etc/GMT* timezones as their names do not indicate the expected zones. For instance, GMT-8 is in fact GMT+8.
Code Listing 1.1: Setting the timezone information
Code: | ls /usr/share/zoneinfo |
(Suppose you want to use GMT)
Code: | cp /usr/share/zoneinfo/GMT /etc/localtime |
|
Check time
set date and time, if needed, using date MMDDhhmmYYYY syntax (Month, Day, hour, minute and Year).
Code: | zcat /proc/config.gz > /usr/share/genkernel/arch/x86/kernel-config
genkernel all
| when genkernel finishes pick up the handbook at: http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?style=printable&full=1#book_part1_chap8 _________________ Defund the FCC. |
|
Back to top |
|
|
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
Posted: Mon Apr 04, 2011 6:13 am Post subject: |
|
|
I still have problms...
Code: | (chroot) sysresccd / # genkernel all
* Gentoo Linux Genkernel; Version 3.4.10.907
* Running with options: all
* Linux Kernel 2.6.36-gentoo-r5 for x86...
* kernel: >> Running mrproper...
* config: Using config from /usr/share/genkernel/arch/x86/kernel-config
* Previous config backed up to .config.bak
* >> Running oldconfig...
* kernel: >> Cleaning...
* >> Compiling 2.6.36-gentoo-r5 bzImage...
* ERROR: Failed to compile the "bzImage" target...
* -- Grepping log... --
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86"
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/hash
HOSTCC scripts/basic/docproc
scripts/basic/docproc.c: In function ‘docsect’:
scripts/basic/docproc.c:336: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
--
Disable ACPI for systems before Jan 1st this year (ACPI_BLACKLIST_YEAR) [1999] 1999
Debug Statements (ACPI_DEBUG) [N/y/?] n
PCI slot detection driver (ACPI_PCI_SLOT) [Y/n/m/?] y
Container and Module Devices (EXPERIMENTAL) (ACPI_CONTAINER) [Y/?] y
Smart Battery System (ACPI_SBS) [M/n/y/?] m
Hardware Error Device (ACPI_HED) [M/y/?] m
ACPI Platform Error Interface (APEI) (ACPI_APEI) [Y/n/?] y
APEI Generic Hardware Error Source (ACPI_APEI_GHES) [M/n/y/?] m
APEI Error INJection (EINJ) (ACPI_APEI_EINJ) [N/m/y/?] n
APEI Error Record Serialization Table (ERST) Debug Support (ACPI_APEI_ERST_DEBUG) [N/m/y/?] (NEW) *
--
Read CNB20LE Host Bridge Windows (PCI_CNB20LE_QUIRK) [Y/n/?] y
Support for DMA Remapping Devices (EXPERIMENTAL) (DMAR) [Y/n/?] y
Enable DMA Remapping Devices by default (DMAR_DEFAULT_ON) [Y/n/?] y
PCI Express support (PCIEPORTBUS) [Y/n/?] y
PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/m/?] y
Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
PCI Express ECRC settings control (PCIE_ECRC) [Y/n/?] y
PCIe AER error injector support (PCIEAER_INJECT) [M/n/y/?] m
--
Compile in debug mode (SCSI_MVSAS_DEBUG) [N/y/?] n
Adaptec I2O RAID support (SCSI_DPT_I2O) [N/m/y/?] n
AdvanSys SCSI support (SCSI_ADVANSYS) [M/n/y/?] m
Always IN2000 SCSI support (SCSI_IN2000) [N/m/y/?] n
ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter (SCSI_ARCMSR) [M/n/y/?] m
Enable PCI Error Recovery Capability in Areca Driver(ARCMSR) (SCSI_ARCMSR_AER) [Y/n/?] y
--
Kprobes sanity tests (KPROBES_SANITY_TEST) [N/y/?] n
Self test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
Force weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
Linux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
CPU notifier error injection module (CPU_NOTIFIER_ERROR_INJECT) [N/m/y/?] n
--
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86"
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/docproc
HOSTCC scripts/basic/hash
scripts/basic/docproc.c: In function ‘docsect’:
scripts/basic/docproc.c:336: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
--
HOSTCC scripts/mod/sumversion.o
HOSTLD scripts/mod/modpost
HOSTCC usr/gen_init_cpio
CC init/main.o
/usr/src/linux-2.6.36-gentoo-r5/scripts/gen_initramfs_list.sh: Cannot open '/var/tmp/genkernel/initramfs-2.6.35-std201-i686.cpio.gz'
make[1]: *** [usr/initramfs_data.cpio.lzma] Error 1
make: *** [usr] Error 2
--
LD init/mounts.o
LD init/built-in.o
* Gentoo Linux Genkernel; Version 3.4.10.907
* Running with options: all
* ERROR: Failed to compile the "bzImage" target...
* -- End log... --
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*
(chroot) sysresccd / #
|
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Apr 04, 2011 1:42 pm Post subject: |
|
|
bootsysresccd, mount gentoo partitions, enter the chroot Code: | grep -i gzip /usr/src/linux/.config | post results; expect to see: Quote: | CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_KERNEL_GZIP=y | then Code: | emerge xz-utils lzma
genkernel all |
_________________ Defund the FCC. |
|
Back to top |
|
|
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
Posted: Mon Apr 04, 2011 4:57 pm Post subject: |
|
|
Not quite, here it is:
Code: | (chroot) sysresccd / # grep -i gzip /usr/src/linux/.config
CONFIG_HAVE_KERNEL_GZIP=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_RD_GZIP=y
# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
CONFIG_DECOMPRESS_GZIP=y
|
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Apr 04, 2011 5:25 pm Post subject: |
|
|
Code: | emerge xz-utils lzma
genkernel all | should run _________________ Defund the FCC. |
|
Back to top |
|
|
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
Posted: Mon Apr 04, 2011 6:11 pm Post subject: |
|
|
still not happy...
Code: | (chroot) sysresccd / # genkernel all
* Gentoo Linux Genkernel; Version 3.4.10.907
* Running with options: all
* Linux Kernel 2.6.36-gentoo-r5 for x86...
* kernel: >> Running mrproper...
* config: Using config from /usr/share/genkernel/arch/x86/kernel-config
* Previous config backed up to .config.bak
* >> Running oldconfig...
* kernel: >> Cleaning...
* >> Compiling 2.6.36-gentoo-r5 bzImage...
* ERROR: Failed to compile the "bzImage" target...
* -- Grepping log... --
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86"
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/hash
HOSTCC scripts/basic/docproc
scripts/basic/docproc.c: In function ‘docsect’:
scripts/basic/docproc.c:336: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
--
Disable ACPI for systems before Jan 1st this year (ACPI_BLACKLIST_YEAR) [1999] 1999
Debug Statements (ACPI_DEBUG) [N/y/?] n
PCI slot detection driver (ACPI_PCI_SLOT) [Y/n/m/?] y
Container and Module Devices (EXPERIMENTAL) (ACPI_CONTAINER) [Y/?] y
Smart Battery System (ACPI_SBS) [M/n/y/?] m
Hardware Error Device (ACPI_HED) [M/y/?] m
ACPI Platform Error Interface (APEI) (ACPI_APEI) [Y/n/?] y
APEI Generic Hardware Error Source (ACPI_APEI_GHES) [M/n/y/?] m
APEI Error INJection (EINJ) (ACPI_APEI_EINJ) [N/m/y/?] n
APEI Error Record Serialization Table (ERST) Debug Support (ACPI_APEI_ERST_DEBUG) [N/m/y/?] (NEW) *
--
Read CNB20LE Host Bridge Windows (PCI_CNB20LE_QUIRK) [Y/n/?] y
Support for DMA Remapping Devices (EXPERIMENTAL) (DMAR) [Y/n/?] y
Enable DMA Remapping Devices by default (DMAR_DEFAULT_ON) [Y/n/?] y
PCI Express support (PCIEPORTBUS) [Y/n/?] y
PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/m/?] y
Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
PCI Express ECRC settings control (PCIE_ECRC) [Y/n/?] y
PCIe AER error injector support (PCIEAER_INJECT) [M/n/y/?] m
--
Compile in debug mode (SCSI_MVSAS_DEBUG) [N/y/?] n
Adaptec I2O RAID support (SCSI_DPT_I2O) [N/m/y/?] n
AdvanSys SCSI support (SCSI_ADVANSYS) [M/n/y/?] m
Always IN2000 SCSI support (SCSI_IN2000) [N/m/y/?] n
ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter (SCSI_ARCMSR) [M/n/y/?] m
Enable PCI Error Recovery Capability in Areca Driver(ARCMSR) (SCSI_ARCMSR_AER) [Y/n/?] y
--
Kprobes sanity tests (KPROBES_SANITY_TEST) [N/y/?] n
Self test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
Force weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
Linux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
CPU notifier error injection module (CPU_NOTIFIER_ERROR_INJECT) [N/m/y/?] n
--
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86"
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/docproc
HOSTCC scripts/basic/hash
scripts/basic/docproc.c: In function ‘docsect’:
scripts/basic/docproc.c:336: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
--
CHK include/generated/utsrelease.h
CALL scripts/checksyscalls.sh
HOSTCC usr/gen_init_cpio
CC init/main.o
/usr/src/linux-2.6.36-gentoo-r5/scripts/gen_initramfs_list.sh: Cannot open '/var/tmp/genkernel/initramfs-2.6.35-std201-i686.cpio.gz'
make[1]: *** [usr/initramfs_data.cpio.lzma] Error 1
make: *** [usr] Error 2
--
LD init/mounts.o
LD init/built-in.o
* Gentoo Linux Genkernel; Version 3.4.10.907
* Running with options: all
* ERROR: Failed to compile the "bzImage" target...
* -- End log... --
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
|
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Apr 04, 2011 8:19 pm Post subject: |
|
|
I believe I see it: I was able to duplicate the error and eliminate with these changes. Menuconfig Screenshots, View as slide show
Code: | genkernel --menuconfig all |
we want Quote: | General setup --->
[*] Prompt for development and/or incomplete code/drivers
() Cross-compiler tool prefix
() Local version - append to kernel release
[ ] Automatically append version information to the version string
Kernel compression mode (GZIP) --->
[*] Support for paging of anonymous memory (swap)
[*] System V IPC
[*] POSIX Message Queues
[*] BSD Process Accounting
[ ] BSD Process Accounting version 3 file format
[*] Export task/process statistics through netlink (EXPERIMENTAL)
[*] Enable per-task delay accounting (EXPERIMENTAL)
[*] Enable extended accounting over taskstats (EXPERIMENTAL)
[*] Enable per-task storage I/O accounting (EXPERIMENTAL)
[*] Auditing support
[*] Enable system-call auditing support
IRQ subsystem --->
RCU Subsystem --->
<*> Kernel .config support
[*] Enable access to .config through /proc/config.gz
(17) Kernel log buffer size (16 => 64KB, 17 => 128KB)
[*] Control Group support --->
-*- Namespaces support --->
[ ] Automatic process group scheduling
[ ] enable deprecated sysfs features to support old userspace tools
-*- Kernel->user space relay support (formerly relayfs)
[*] Initial RAM filesystem and RAM disk (initramfs/initrd) support
() Initramfs source file(s)
[*] Optimize for size
[ ] Configure standard kernel features (expert users) --->
[ ] Embedded system
-*- Load all symbols for debugging/ksymoops
-*- Include all symbols in kallsyms
[*] Do an extra kallsyms pass
Kernel Performance Events And Counters --->
[ ] Disable heap randomization
Choose SLAB allocator (SLUB (Unqueued Allocator)) --->
[*] Profiling support<M> OProfile system profiling
[*] OProfile multiplexing support (EXPERIMENTAL)
[*] Kprobes
[ ] Optimize trace point call sites
GCOV-based kernel profiling ---> |
_________________ Defund the FCC. |
|
Back to top |
|
|
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
Posted: Tue Apr 05, 2011 8:48 pm Post subject: |
|
|
It worked, thanks.
Now I am trying to set up the boot loader but I can't modify /boot/grub/grub.conf because it says it is a read only file system.
How can i get around this?
P.s. I am not trying to modify the rescue cd files. |
|
Back to top |
|
|
germanas n00b
Joined: 31 Mar 2011 Posts: 7 Location: EU
|
Posted: Tue Apr 05, 2011 11:18 pm Post subject: |
|
|
Code: | mount -o rw /dev/sda1 /boot |
Just change your partition according to your system. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Tue Apr 05, 2011 11:51 pm Post subject: |
|
|
if remounting in the chroot fails. continue per the handbook until it has you exit the chroot and unmount the gentoo partitions, then remount them, to check /mnt/gentoo/boot is mounted; Code: | nano /mnt/gentoo/boot/grub/grub.conf | and edit. _________________ Defund the FCC. |
|
Back to top |
|
|
feddozz n00b
Joined: 24 Feb 2011 Posts: 38
|
Posted: Tue Apr 12, 2011 11:54 am Post subject: |
|
|
I managed to make it boot, now i have some probs with the wireless connections.
returns the list of available networks. I emerged dhcpcd and ipw2200-firmware.
My /etc/conf.d/net reads as follows:
Code: | essid_eth1="EleVi"
key_EleVi="s:whatever enc open" |
I also added ipw, ipwireless and ipw2200 to
Code: | /etc/modules.autoload.d/kernel-2.6 |
The problem is that at boot dhcpcd identifies the right essid but then it says 'waiting for carrier', then times out and does not connect.
Any suggestions? |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Tue Apr 12, 2011 3:44 pm Post subject: |
|
|
I will assume your wifi interface is named eth1, let me know if idifferent.
Do you have internet using a wired connection?
Does iwlist scan in fact tell you that your router, EleVi , is open?
Have you installed a desktop?
Does your laptop have an on/off (sometimes function keys) for the wifi radio? Perhaps an on/off light?
what does show?
try:
Code: | /etc/init.d/net.eth1 stop
ifconfig eth1 down
ifconfig eth1 up
iwconfig eth1 mode managed
iwconfig eth1 txpower auto
iwconfig eth1 essid "EleVi"
dhcpcd eth1 |
for future use Code: | emerge wpa_supplicant |
Code: | nano /etc/wpa_supplicant/wpa_supplicant.conf | Edit to Quote: | ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
update_config=1 |
_________________ Defund the FCC. |
|
Back to top |
|
|
|