| View previous topic :: View next topic |
| Author |
Message |
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
 Posted: Sat Sep 20, 2003 11:25 am Post subject: Il mouse nn scrolla :) [RISOLTO] |
 |
|
eccomi di nuovo qua a chiedere aiuto 
il problema di oggi è il mouse, infatti mi attiva lo scroll delle pagine (con la rotella) solo se mi sposto sulla barra di scorrimento (col cursore) 
Il problema è nato 4 giorni fa, quando son passato da un mouse usb 5 tasti ( 2 x scroll) definito generic al Microsoft Intellimouse Wireless Expl.
Allego un estratto del mio XF86Config
| Code: |
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "Buttons" "7"
Option "ZAxisMapping" "6 7"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
|
Grazie in anticipo
CiauZ
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ®
Last edited by JohnT.Clark on Mon Sep 22, 2003 9:56 pm; edited 2 times in total |
|
| Back to top |
|
 |
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31467
Location: here
|
| Posted: Sat Sep 20, 2003 11:32 am Post subject: |
|
|
Prova a mettere questo
| Code: | Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5" |
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Sat Sep 20, 2003 11:47 am Post subject: |
|
|
Niente se metto:
| Code: |
Option "ZAxisMapping" "4 5"
|
Nn va proprio xchè da quanto ho capito girando i tasti x lo scroll sono il 6 e il 7
non può essere qualche impostazione del KDE?
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
bibi[M]
Apprentice
Joined: 10 Aug 2003
Posts: 153
|
| Posted: Sat Sep 20, 2003 12:02 pm Post subject: |
|
|
Ma quanti tasti hai?___? Hai anche il back and forward?
Comunque l'impostazione "classica" per un mouse tre tasti/rotella è questa:
| Code: |
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
|
...con 7 tasti... boh^-^
(fedeliallalinea, me l'hai spedita l'amica?^^)
_________________
jazz lives!
For the italians: evitate: "ke", "xké", "qlc", "nn"... |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31467
Location: here
|
| Posted: Sat Sep 20, 2003 12:05 pm Post subject: |
|
|
@JohnT.Clark cercando su internet ho trovato questo che dovrebbe
funzionare
| Code: | Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" # for the Microsoft Intellimouse
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5" # To get the wheel working.
EndSection |
| bibi[M] wrote: | | (fedeliallalinea, me l'hai spedita l'amica?^^) |
Quella non ne vuole sapere di entrare nella busta .
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Sat Sep 20, 2003 12:28 pm Post subject: |
|
|
| bibi[M] wrote: | "fedeliallalinea | bibi[M] wrote: | | (fedeliallalinea, me l'hai spedita l'amica?^^) |
Quella non ne vuole sapere di entrare nella busta . |
Ehm... di che parlate???
----
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31467
Location: here
|
| Posted: Sat Sep 20, 2003 12:42 pm Post subject: |
|
|
| cerri wrote: | | bibi[M] wrote: | "fedeliallalinea | bibi[M] wrote: | | (fedeliallalinea, me l'hai spedita l'amica?^^) |
Quella non ne vuole sapere di entrare nella busta . |
Ehm... di che parlate???
---- |
Ehhehe... anche i moderatori a volte sono all'oscuro... 
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Sat Sep 20, 2003 1:01 pm Post subject: |
|
|
Ok. Allora vado a spegnere il server.
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Sun Sep 21, 2003 10:30 am Post subject: |
|
|
[quote="fedeliallalinea"]@JohnT.Clark cercando su internet ho trovato questo che dovrebbe
funzionare
| Code: | Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" # for the Microsoft Intellimouse
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5" # To get the wheel working.
EndSection |
con questi la rotella funziona anche senza spostare il cursore sulla barra di scroll Tnz
P.s. xò adesso nn ho più i tast back e foward 
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31467
Location: here
|
| Posted: Sun Sep 21, 2003 11:28 am Post subject: |
|
|
| JohnT.Clark wrote: | | P.s. xò adesso nn ho più i tast back e foward |
Cioe'?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Sun Sep 21, 2003 11:31 am Post subject: |
|
|
eheh
Nel senso che ho 7 tasti a disposizione ma ne uso 5
Cmq x me va bene lo stesso, anche xchè nn so se esista un programma modello Intellitype Microsoft x assegnare determinate funzioni dei tasti...
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31467
Location: here
|
| Posted: Sun Sep 21, 2003 11:39 am Post subject: |
|
|
| paolo wrote: | https://forums.gentoo.org/viewtopic.php?t=21251
(In pratica devi scambiare 4e5 con 6e7)
Paolo |
Orca mi hai preceduto....
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
Nimish
n00b
Joined: 11 Sep 2003
Posts: 74
Location: Torino
|
| Posted: Sun Sep 21, 2003 1:23 pm Post subject: |
|
|
ma invece con un USB???
come devo fare??
il mio e' un logitech 2 pulsanti + rotella...
ho lo stesso problema... ma non ho mai provato a girarla andando dulla scrollbar!
devo mettere 6 e 7 anche io??? |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Sun Sep 21, 2003 1:26 pm Post subject: |
|
|
| fedeliallalinea wrote: |
Orca mi hai preceduto....
|
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Sun Sep 21, 2003 1:31 pm Post subject: |
|
|
| Nimish wrote: | ma invece con un USB???
come devo fare??
il mio e' un logitech 2 pulsanti + rotella...
ho lo stesso problema... ma non ho mai provato a girarla andando dulla scrollbar!
devo mettere 6 e 7 anche io??? |
Hai lo stesso problema? Cioè non ti funziona la rotella?
Le impostazioni di usb e ps/2 si differenziano solo per l'opzione Device.
Paolo
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
Nimish
n00b
Joined: 11 Sep 2003
Posts: 74
Location: Torino
|
| Posted: Sun Sep 21, 2003 1:36 pm Post subject: |
|
|
| paolo wrote: |
Hai lo stesso problema? Cioè non ti funziona la rotella?
Le impostazioni di usb e ps/2 si differenziano solo per l'opzione Device.
Paolo |
si...non funge la rotella..
io come devce ho /dev/input/mice
devo lasciare questo... no?? |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Sun Sep 21, 2003 1:57 pm Post subject: |
|
|
Yes.
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31467
Location: here
|
| Posted: Sun Sep 21, 2003 2:04 pm Post subject: |
|
|
| Nimish wrote: | si...non funge la rotella..
io come devce ho /dev/input/mice
devo lasciare questo... no?? |
Che mouse e'? Che protocollo hai settato nel tuo XF86Config (PS/2,
IMPS/2,...)?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
Nimish
n00b
Joined: 11 Sep 2003
Posts: 74
Location: Torino
|
| Posted: Sun Sep 21, 2003 5:53 pm Post subject: |
|
|
e' un mouuse logitech a 2 pulsanti piu' rotella, USB e per farlo funzionare ho messo in /etc/X!!/XF86Config
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
si puo' dire quindi che il problema da parte mia e':
RISOLTO
come dice fedeliallalinea...
poi ti do le dritte del mio C/C |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31467
Location: here
|
| Posted: Sun Sep 21, 2003 6:04 pm Post subject: |
|
|
| Nimish wrote: | e' un mouuse logitech a 2 pulsanti piu' rotella, USB e per farlo funzionare ho messo in /etc/X!!/XF86Config
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
si puo' dire quindi che il problema da parte mia e':
RISOLTO
come dice fedeliallalinea...
poi ti do le dritte del mio C/C |
Io metterei il protocollo apposta per il logitech ovvero
| Code: | | Option "Protocol" "MouseManPlusPS/2" |
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
bibi[M]
Apprentice
Joined: 10 Aug 2003
Posts: 153
|
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Mon Sep 22, 2003 10:33 am Post subject: |
|
|
Grazie adesso son quasi riuscito a farlo funzionare, c'è solo un paio di cose
Dove trovo questo file ~/.xinitrc alchè io possa mettere
| Code: |
exec xmodmap -e "pointer = 1 2 3 6 7 4 5" &
|
E poi quando vado a editare questo file /etc/X11/imwheelrc
devo cancellare tutto quello che ha dentro e lasciare:
| Code: |
".*"
None, Up, Alt_L|Left
None, Down, Alt_L|Right
|
Oppure devo aggiungerlo e basta?
CiauZ
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31467
Location: here
|
| Posted: Mon Sep 22, 2003 11:12 am Post subject: |
|
|
| JohnT.Clark wrote: | Dove trovo questo file ~/.xinitrc alchè io possa mettere
| Code: |
exec xmodmap -e "pointer = 1 2 3 6 7 4 5" &
|
|
Questo file non esiste devi crearlo te nella tua home directory.
| Code: | | # touch .xinitrc | echo "exec xmodmap -e "pointer = 1 2 3 6 7 4 5" &" > .xinitrc |
| JohnT.Clark wrote: |
E poi quando vado a editare questo file /etc/X11/imwheelrc
devo cancellare tutto quello che ha dentro e lasciare:
| Code: |
".*"
None, Up, Alt_L|Left
None, Down, Alt_L|Right
|
Oppure devo aggiungerlo e basta? |
Presumo che devi solo aggiungere.
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Mon Sep 22, 2003 11:41 am Post subject: |
|
|
è tutta sta roba...# IMWheel Configuration file ($HOME/.imwheelrc or /etc/imwheelrc)
| Code: |
# (GPL)Jon Atkins <jcatki@jonatkins.org>
# Please read the README and/or imwheel(1) manpage for info
# and this is best operated on using vim (as I said: It's crunchy)
#
# This is only for demonstration of the priority command...
# See the other global Exclude command below for the one you want to use!
# If this is activated it will only apps that have a lower priority
# priority is based first on the priority command, then the position in this
# file - the higher the line is in a file the higher in a priority class it is
# thus for a default priority you can see that the position in the file is
# important, but the priority command CAN appear anywahere in a window's list
# of translations, and the priority will be assigned to all translations below
# it until either a new window is defined or the priority is set again.
#
#".*"
#@Priority=-1000 #the default priority is zero, higher numbers take precedence
#@Exclude
#@Repeat
# This one rule can send button events, as if you used ZAxisMapping "4 5"
# Make sure your XF86Config allows for the max buttons needed...
# otherwise the events will NOT even be generated...
#".*"
#, Up, Button4
#, Down, Button5
#, Left, Button6
#, Right, Button7
#, Thumb1, Button6
#, Thumb2, Button7
#Thanks to Mathias Weyland <mathias@weyland-wtal.de>
"^mutt.*"
None, Up, Up
None, Down, Down
Control_L, Up, Page_Up
Control_L, Down, Page_Down
#Thanks to Mathias Weyland <mathias@weyland-wtal.de>
"^aterm"
None, Up, Shift_L|Page_Up
None, Down, Shift_L|Page_Down
Control_L, Up, Up
Control_L, Down, Down
#Thanks to Mathias Weyland <mathias@weyland-wtal.de>
"^Xplns"
None, Up, Left
None, Down, Right
Control_L, Up, Up
Control_L, Down, Down
"^kvt"
None, Up, Shift_L|Page_Up
None, Down, Shift_L|Page_Down
"^Konsole"
None, Up, Shift_L|Page_Up
None, Down, Shift_L|Page_Down
"^XMcd"
None, Up, C
None, Down, Shift_L|C
"^XMMS_Player"
None, Up, Right
None, Down, Left
"^XMMS_Playlist"
Control_L, Up, Up
Control_L, Down, Down
"^xmms"
Alt_L, Up, Z
Alt_L, Down, B
Control_L, Up, V
Control_L, Down, C
"^XATITV-GATOS"
None, Down, KP_Subtract
None, Up, KP_Add
"^Xman"
None, Down, F
Shift_L, Down, 3
None, Up, B
"^Gvim"
Shift_L, Up, Control_L|Y
Shift_L, Down, Control_L|E
None, Up, Page_Up
None, Down, Page_Down
"^VIM"
Shift_L, Up, Control_L|Y
Shift_L, Down, Control_L|E
None, Up, Page_Up
None, Down, Page_Down
"^Eterm"
Alt_L, Up, Shift_L|Page_Up
Alt_L, Down, Shift_L|Page_Down
"^GnomeTerminal"
@Exclude
@Repeat
None, Up, Shift_L|Page_Up
None, Down, Shift_L|Page_Down
"^NXTerm"
None, Up, Shift_L|Page_Up
None, Down, Shift_L|Page_Down
"^rxvt"
Alt_L, Up, Shift_L|Page_Up
Alt_L, Down, Shift_L|Page_Down
"^XTerm"
Alt_L, Up, Shift_R|Page_Up
Alt_L, Down, Shift_R|Page_Down
Alt_L, Left, Control_L|A
Alt_L, Right, Control_L|E
#Shift_L, Down, Shift_L|1
"^Mozilla.*"
#
# If you want to scroll by a few lines then uncomment these 4 lines
# and comment out the paging 4 lines below these!
#
#Shift_L, Down, Page_Down, 1, 1000, 1000
#Shift_L, Up, Page_Up, 1, 1000, 1000
#None, Down, Down, 7, 1000, 1000
#None, Up, Up, 7, 1000, 1000
#
# If you don't like page scrolling then comment these out and uncomment above!
#
Shift_L, Down, Down, 7,
Shift_L, Up, Up, 7,
None, Down, Page_Down, 1,
None, Up, Page_Up, 1,
# Left/Right & Thumb stuff
None, Left, Left, 7,
None, Right, Right, 7,
None, Thumb1, Down, 7,
Shift_L, Thumb1, Up, 7,
None, Thumb2, Up, 7,
Shift_L, Thumb2, Down, 7,
"^SDL_App"
, Up, Button4
, Down, Button5
, Thumb1, Home #many apps don't understand Button > 5
, Thumb2, End #many apps don't understand Button > 5
# Thanks to shewp <shewplx@pblx.net>
"^Opera"
#@Repeat # let qt do it
None, Down, Down, 4, 100, 100
None, Up, Up, 4, 100, 100
None, Thumb1, Right
None, Thumb2, Left
"^Netscape"
#
# If you want to scroll by a few lines then uncomment these 4 lines
# and comment out the paging 4 lines below these!
#
#Shift_L, Down, Page_Down, 1, 1000, 1000
#Shift_L, Up, Page_Up, 1, 1000, 1000
#None, Down, Down, 7, 1000, 1000
#None, Up, Up, 7, 1000, 1000
#
# If you don't like page scrolling then comment these out and uncomment above!
#
Shift_L, Down, Shift_L|Down, 7, 1000, 1000
Shift_L, Up, Shift_L|Up, 7, 1000, 1000
None, Down, Page_Down, 1, 1000, 1000
None, Up, Page_Up, 1, 1000, 1000
# Left/Right & Thumb stuff
None, Left, Left, 7, 1000, 1000
None, Right, Right, 7, 1000, 1000
None, Thumb1, Down, 7, 1000, 1000
Shift_L, Thumb1, Up, 7, 1000, 1000
None, Thumb2, Up, 7, 1000, 1000
Shift_L, Thumb2, Down, 7, 1000, 1000
"^Navigator"
#Alt_L, Down, Alt_L|Right
#Alt_L, Up, Alt_L|Left
Alt_L, Down, Right, 10, 1000, 1000
Alt_L, Up, Left, 10, 1000, 1000
# Thanks to Paul J Collins <sneakums@usa.net>
"^emacs"
Shift_L, Up, Page_Up
Shift_L, Down, Page_Down
# you may need Alt instead of Meta....
None, Down, Control_L|Meta_L|Shift_L|parenright
None, Up, Control_L|Meta_L|Shift_L|parenleft
# Thanks to etienne grossmann <etienne@isr.ist.utl.pt>
"^Xftp"
, Down, j
, Up, k
# Thanks to etienne grossmann <etienne@isr.ist.utl.pt>
"^gv"
None, Up, Shift_L|space
None, Down, space
"^Event Tester"
@Repeat
@Exclude
"^xv grab"
@Priority=1
@Exclude
"^XV.*"
None, Down, Tab
None, Up, Delete
"^Untitled"
# if using wheel fifo, you may switch these.
#, Up, Button4
#, Down, Button5
#with these
, Up, Page_Up
, Down, Page_Down
# (end of switch)
, Thumb1, Home
, Thumb2, End
"^No Title"
# if using wheel fifo, you may switch these.
#, Up, Button4
#, Down, Button5
#with these
, Up, Page_Up
, Down, Page_Down
# (end of switch)
, Thumb1, Home
, Thumb2, End
"\(null\)"
# if using wheel fifo, you may switch these.
#, Up, Button4
#, Down, Button5
#with these
, Up, Page_Up
, Down, Page_Down
# (end of switch)
, Thumb1, Home
, Thumb2, End
#
# Uncommment the following to exclude by default.
# Then you will have to add new apps all the time, but will retain any built-in
# wheel functionality contained in some KDE and other newer programs.
# This kinda defeats the original purpose of the program! ;)
#
#".*"
#@Priority=-1000
#@Exclude
#@Repeat
#
# These are the defaults, but note that the defaults for the right side of the
# keyboard are still handled within the program, unless you add the
# combinations desired here. (except for the None modifier of course!)
# If this section is deleted then the hardcoded defaults will be used, which
# are the same thing.
# Modifying these has global effects, but doesn't override what is above.
#
".*"
@Priority=-1001
None, Left, Left
None, Right, Right
None, Up, Page_Up
None, Down, Page_Down
Shift_L, Left, Left
Shift_L, Right, Right
Shift_L, Up, Up
Shift_L, Down, Down
Control_L, Left, Left, 2
Control_L, Right, Right, 2
Control_L, Up, Page_Up, 2
Control_L, Down, Page_Down, 2
Shift_L|Control_L, Left, Left, 5
Shift_L|Control_L, Right, Right, 5
Shift_L|Control_L, Up, Page_Up, 5
Shift_L|Control_L, Down, Page_Down, 5
Alt_L, Left, Left, 10
Alt_L, Right, Right, 10
Alt_L, Up, Left, 10
Alt_L, Down, Right, 10
Shift_L| Alt_L, Left, Left
Shift_L| Alt_L, Right, Right
Shift_L| Alt_L, Up, Left
Shift_L| Alt_L, Down, Right
Control_L|Alt_L, Left, Left. 20
Control_L|Alt_L, Right, Right. 20
Control_L|Alt_L, Up, Left. 20
Control_L|Alt_L, Down, Right. 20
Shift_L|Control_L|Alt_L, Left, Left, 50
Shift_L|Control_L|Alt_L, Right, Right, 50
Shift_L|Control_L|Alt_L, Up, Left, 50
Shift_L|Control_L|Alt_L, Down, Right, 50
# vim:ts=4:shiftwidth=4:syntax=sh
|
è c'è già qualcosa di simile a quello che devo aggiungere editando nelle ultime 40 righe
CiauZ
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
)