View previous topic :: View next topic |
Author |
Message |
lo-jay l33t
![l33t l33t](/images/ranks/rank_rect_4.gif)
Joined: 27 Feb 2005 Posts: 862
|
Posted: Thu May 19, 2011 12:38 pm Post subject: lo & eth0 mess after update |
|
|
ater a big & overdue update my lo & eth0 config seems to be kinda messed up:
here the relevant dmesg part, got net though
Code: | [ 70.699134] sky2 0000:07:00.0: eth0: enabling interface
[ 70.699583] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 71.212798] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
[ 72.403646] sky2 0000:07:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 72.403772] sky2 0000:07:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 72.404109] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 73.569246] Bluetooth: L2CAP ver 2.15
[ 73.569249] Bluetooth: L2CAP socket layer initialized
[ 73.586583] Bluetooth: RFCOMM TTY layer initialized
[ 73.586589] Bluetooth: RFCOMM socket layer initialized
[ 73.586591] Bluetooth: RFCOMM ver 1.11
[ 74.138762] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 83.035369] eth0: no IPv6 routers present
[ 108.992655] usb 2-1.2: link qh8-0601/ffff88011c96d000 start 2 [1/2 us]
[ 301.304054] kworker/u:0 used greatest stack depth: 3640 bytes left
|
where would i start diggin'?
cheers! _________________ lo-jay
The mechanic "One of 'em Dodge Chargers - let him go by."
The driver "Not today!"
taken from "Two Lane Blacktop" |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
John R. Graham Administrator
![Administrator Administrator](/images/ranks/rank-admin.gif)
![](images/avatars/1323583785534df64897db0.jpg)
Joined: 08 Mar 2005 Posts: 10731 Location: Somewhere over Atlanta, Georgia
|
Posted: Thu May 19, 2011 1:10 pm Post subject: |
|
|
Could you post the output of Code: | ls /etc/init.d/net* | andand Code: | /etc/init.d/dhcpcd start | and, after that,again, please?
Also, you just upgraded to baselayout-2 and openrc, right? Did you handle all of your config file updates with etc-update or dispatch-conf?
- John _________________ I can confirm that I have received between 0 and 499 National Security Letters. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
lo-jay l33t
![l33t l33t](/images/ranks/rank_rect_4.gif)
Joined: 27 Feb 2005 Posts: 862
|
Posted: Thu May 19, 2011 1:18 pm Post subject: |
|
|
Code: | ls /etc/init.d/net* |
Code: | /etc/init.d/net.eth0 /etc/init.d/net.lo /etc/init.d/netmount /etc/init.d/network
|
Code: | # ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:54:8b:55:80
inet addr:192.168.1.146 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:54ff:fe8b:5580/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5510 errors:0 dropped:0 overruns:0 frame:0
TX packets:5557 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4186069 (3.9 MiB) TX bytes:989793 (966.5 KiB)
Interrupt:19
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 18:f4:6a:37:1f:bd
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
|
Code: | ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:54:8b:55:80
inet addr:192.168.1.146 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:54ff:fe8b:5580/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5525 errors:0 dropped:0 overruns:0 frame:0
TX packets:5575 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4188495 (3.9 MiB) TX bytes:991626 (968.3 KiB)
Interrupt:19
gre0 Link encap:UNSPEC HWaddr 00-00-00-00-FF-00-00-00-00-00-00-00-00-00-00-00
UP RUNNING NOARP MTU:1476 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
sit0 Link encap:IPv6-in-IPv4
inet6 addr: ::192.168.1.146/96 Scope:Compat
inet6 addr: ::127.0.0.1/96 Scope:Unknown
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
tunl0 Link encap:IPIP Tunnel HWaddr
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 18:f4:6a:37:1f:bd
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
|
yes - did an etc-update, not sure so if i always choose the right options...
cheers again! _________________ lo-jay
The mechanic "One of 'em Dodge Chargers - let him go by."
The driver "Not today!"
taken from "Two Lane Blacktop" |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
John R. Graham Administrator
![Administrator Administrator](/images/ranks/rank-admin.gif)
![](images/avatars/1323583785534df64897db0.jpg)
Joined: 08 Mar 2005 Posts: 10731 Location: Somewhere over Atlanta, Georgia
|
Posted: Thu May 19, 2011 1:54 pm Post subject: |
|
|
This looks pretty normal. What exactly isn't working?
- John _________________ I can confirm that I have received between 0 and 499 National Security Letters. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
lo-jay l33t
![l33t l33t](/images/ranks/rank_rect_4.gif)
Joined: 27 Feb 2005 Posts: 862
|
Posted: Thu May 19, 2011 2:28 pm Post subject: |
|
|
well, i get Code: | ERROR net.eth0 failed to start |
& the boot-up takes too long...
cheers again!
EDIT: this seems to ntpd related, opened another post:
https://forums.gentoo.org/viewtopic-t-879043-highlight-.html _________________ lo-jay
The mechanic "One of 'em Dodge Chargers - let him go by."
The driver "Not today!"
taken from "Two Lane Blacktop" |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
|