| View previous topic :: View next topic |
| Author |
Message |
Darknight
Guru
Joined: 26 Jan 2004
Posts: 485
Location: Italy
|
 Posted: Tue Jun 07, 2011 5:41 pm Post subject: Setting both an ipv4 and ipv6 default route |
 |
|
Previously I was able to specify both very cleanly with "default via..." lines but now with openrc/baselayout 2... no more.
| Code: | * Bringing up interface eth0
* aa.bb.cc.dd/24 ... [ ok ]
* aa:bb:cc:dd::ee/64 ... [ ok ]
* Adding routes
* default via aa.bb.cc.df default via fe80::222:56ff:feba:bfbf dev eth0 ...
Error: either "to" is a duplicate or "default" is a garbage [ !! ]
* Waiting for IPv6 addresses ... [ ok ] |
Thus only the ipv4 route is set. For the time being I have added manually the routes but it can't be a solution.
My /etc/conf.d/net:
| Code: | modules="iproute2"
config_eth0="aa.bb.cc.dd/24 aa:bb:cc:dd::ee/64"
routes_eth0="default via aa.bb.cc.de default via fe80::222:56ff:feba:bfbf dev eth0" |
Any help is greatly appreciated. |
|
| Back to top |
|
 |
Yuu
Apprentice
Joined: 23 Dec 2008
Posts: 223
Location: France
|
| Posted: Wed Jun 08, 2011 8:03 am Post subject: |
|
|
Hi Darknight,
Maybe you should add some 'carriage return' to your configuration, and remove the dupplicate 'default via'.
Here is my setup, maybe it could help :
| Code: | config_eth0="10.11.12.13 netmask 255.255.255.0
2001:0123:0123:0123::1/64"
routes_eth0="default gw 10.11.12.254
2001:0123:0123:01ff:ff:ff:ff:ff/128 dev eth0
default via 2001:0123:0123:01ff:ff:ff:ff:ff" |
| Code: |
ifconfig eth0
eth0 Lien encap:Ethernet HWaddr 01:02:03:04:05:06
inet adr:10.11.12.13 Bcast:10.11.12.255 Masque:255.255.255.0
adr inet6: fe80::21xx:c0xx:xxxx:6854/64 Scope:Lien
adr inet6: 2001:0123:0123:0123::1/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:115970059 errors:0 dropped:0 overruns:0 frame:0
TX packets:167354698 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:57116512674 (53.1 GiB) TX bytes:170791028430 (159.0 GiB)
Interruption:19 Adresse de base:0x2000 |
_________________
Main laptop : T8300 cpu | 200 GB hard drive | 2 GB of ram | 8600M GT | Gentoo x86_64
Server : Celeron 220 cpu | 250 GB hard drive | 2 GB of ram | SiS 662 VGA | Gentoo x86_64 |
|
| Back to top |
|
|
Darknight
Guru
Joined: 26 Jan 2004
Posts: 485
Location: Italy
|
| Posted: Wed Jun 08, 2011 9:26 am Post subject: |
|
|
In the end this worked.
| Code: | modules="iproute2"
config_eth0="aa.bb.cc.dd/24
aa:bb:cc:dd::ee/64"
routes_eth0="default gw aa.bb.cc.de
default via fe80::222:56ff:feba:bfbf dev eth0" |
Quirky...
Thank you. |
|
| Back to top |
|
|
|
Networking & Security
