hol9000
n00b
Joined: 04 Oct 2002
Posts: 45
Location: Berlin/Germany
|
 Posted: Thu Sep 25, 2003 8:11 pm Post subject: Framebuffer (?) problem on insertion of firewire pcmcia-card |
 |
|
Hi there,
I just finished an installation of gentoo from GRP cds from 09/11/03 on my dell inspiron 4100. I'm running gentoo-sources 2.4.20-gentoo-r7. I'm still in the process of getting everything to run again. The notebook contains a geforce2go, 32mb of memory.
Using yenta-socket for the pcmcia and the hotplug I'd like to use a firewire pcmcia card (Noname, or "mentor", P/N: PCM1394) to connect an external fw-harddisk (which already worked in gentoo on this computer). My problem now is, that on insertion, on the console I get a garbled screen, in X I get a locked screen. The computer isn't locked though, I can still use it via network. From /var/log/messages I can see, that it seems to have to do with nvidia/framebuffer. Does anyone know what I can do to prevent this?
I'll post the excerpt from messages, excerpts from my kernel config and the list of currently loaded modules.
It would be cool if anyone had an idea about what I should do here... is there a way to prevent framebuffers to be used without rebuilding the kernel? Is this something card-specific? Unfortunately I don't have other pcmcia cards to try out (except from the minipci wlan card, which is builtin and on the pcmcia as well).
Greetings,
Holger
| Code: |
Sep 25 21:45:00 existenz cs: cb_alloc(bus 3): vendor 0x104c, device 0x8023
Sep 25 21:45:00 existenz PCI: Enabling device 03:00.0 (0000 -> 0002)
Sep 25 21:45:00 existenz cardmgr[2832]: socket 0: CardBus hotplug device
Sep 25 21:45:01 existenz CRON[4179]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Sep 25 21:45:01 existenz ohci1394: $Rev: 578 $ Ben Collins <bcollins@debian.org>
Sep 25 21:45:01 existenz PCI: Setting latency timer of device 03:00.0 to 64
Sep 25 21:45:01 existenz ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[30800000-308007ff] Max Packet=[2048]
Sep 25 21:45:01 existenz rivafb: RIVA MTRR set to ON
Sep 25 21:45:01 existenz Console: switching to colour frame buffer device 80x30
Sep 25 21:45:01 existenz rivafb: PCI nVidia NV10 framebuffer ver 0.9.3 (GeForce2-Go, 32MB @ 0xE0000000)
Sep 25 21:45:01 existenz i810_rng: RNG not detected
Sep 25 21:45:01 existenz insmod: /lib/modules/2.4.20-gentoo-r7/kernel/drivers/char/i810_rng.o: init_module: No such device
Sep 25 21:45:01 existenz insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
. You may find more information in syslog or the output from dmesg
Sep 25 21:45:01 existenz insmod: /lib/modules/2.4.20-gentoo-r7/kernel/drivers/char/i810_rng.o: insmod /lib/modules/2.4.20-gentoo-r7/kerne
l/drivers/char/i810_rng.o failed
Sep 25 21:45:01 existenz insmod: /lib/modules/2.4.20-gentoo-r7/kernel/drivers/char/i810_rng.o: insmod i810_rng failed
Sep 25 21:45:01 existenz pci.agent: ... can't load module i810_rng
Sep 25 21:45:01 existenz pci.agent: missing kernel or user mode driver i810_rng
Sep 25 21:45:01 existenz uhci.c: USB Universal Host Controller Interface driver v1.1
Sep 25 21:45:01 existenz PCI: Found IRQ 11 for device 00:1d.0
Sep 25 21:45:01 existenz PCI: Sharing IRQ 11 with 01:00.0
Sep 25 21:45:01 existenz PCI: Setting latency timer of device 00:1d.0 to 64
Sep 25 21:45:01 existenz uhci.c: USB UHCI at I/O 0xbf80, IRQ 11
Sep 25 21:45:01 existenz usb.c: new USB bus registered, assigned bus number 1
Sep 25 21:45:01 existenz uhci.c: detected 2 ports
Sep 25 21:45:01 existenz usb.c: kmalloc IF e8e69640, numif 1
Sep 25 21:45:01 existenz usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
Sep 25 21:45:01 existenz usb.c: USB device number 1 default language ID 0x0
Sep 25 21:45:01 existenz Product: USB UHCI-alt Root Hub
Sep 25 21:45:01 existenz SerialNumber: bf80
Sep 25 21:45:01 existenz hub.c: USB hub found
Sep 25 21:45:01 existenz hub.c: 2 ports detected
Sep 25 21:45:01 existenz hub.c: standalone hub
Sep 25 21:45:01 existenz hub.c: ganged power switching
Sep 25 21:45:01 existenz hub.c: global over-current protection
Sep 25 21:45:01 existenz hub.c: Port indicators are not supported
Sep 25 21:45:01 existenz hub.c: power on to power good time: 2ms
Sep 25 21:45:01 existenz hub.c: hub controller current requirement: 0mA
Sep 25 21:45:01 existenz hub.c: port removable status: RR
Sep 25 21:45:01 existenz hub.c: local power source is good
Sep 25 21:45:01 existenz hub.c: no over-current condition exists
Sep 25 21:45:01 existenz hub.c: enabling power on all ports
Sep 25 21:45:01 existenz usb.c: hub driver claimed interface e8e69640
Sep 25 21:45:01 existenz usb.c: kusbd: /sbin/hotplug add 1
Sep 25 21:45:01 existenz default.hotplug: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add
PWD=/etc/hotplug HOME=/ SHLVL=2 DEVICE=/proc/bus/usb/001/001 PRODUCT=0/0/0 TYPE=9/0/0 DEBUG=kernel _=/bin/env)
Sep 25 21:45:01 existenz default.hotplug: invoke /etc/hotplug/usb.agent ()
Sep 25 21:45:01 existenz ieee1394: Host added: Node[00:1023] GUID[0000000000003eb0] [Linux OHCI-1394]
Sep 25 21:45:02 existenz uhci.c: bf80: suspend_hc
Sep 25 21:45:04 existenz usb.agent: Setup usbcore for USB product 0/0/0
Sep 25 21:45:04 existenz usb.agent: Setup usbcore for USB product 0/0/0
|
Kernel configs...
| Code: |
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
...
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
...
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
CONFIG_TCIC=y
CONFIG_I82092=y
CONFIG_I82365=y
...
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_LONG_TIMEOUT is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
CONFIG_USB_OHCI=m
CONFIG_USB_AUDIO=m
...
|
The modules...
| Code: |
Module Size Used by Tainted: P
uhci 28336 0 (unused)
rivafb 41672 63
fbcon-cfb32 3880 0 [rivafb]
fbcon-cfb8 3528 0 [rivafb]
fbcon-cfb16 4168 0 [rivafb]
ohci1394 18344 0 (unused)
ieee1394 35596 0 [ohci1394]
agpgart 18960 3 (autoclean)
nvidia 1631424 12 (autoclean)
ide-cd 30696 0 (autoclean)
floppy 51772 0 (autoclean)
orinoco_cs 4808 0
orinoco 31768 0 [orinoco_cs]
hermes 6500 0 [orinoco_cs orinoco]
ds 7240 3 [orinoco_cs]
yenta_socket 10208 3
pcmcia_core 39456 0 [orinoco_cs ds yenta_socket]
rtc 7548 0 (autoclean)
usbcore 72416 1 [uhci]
nls_cp850 3580 1 (autoclean)
nls_cp437 4348 1 (autoclean)
vfat 10924 1 (autoclean)
fat 33624 0 (autoclean) [vfat]
i8k 6760 0 (unused)
sr_mod 19032 0 (unused)
cdrom 29952 0 [ide-cd sr_mod]
sg 34796 0 (unused)
ide-scsi 8944 0
scsi_mod 97108 3 [sr_mod sg ide-scsi]
3c59x 28208 1
apm 10312 1
|
|
|
Kernel & Hardware
