| View previous topic :: View next topic |
| Author |
Message |
treyb
n00b
Joined: 20 Sep 2011
Posts: 51
|
 Posted: Tue Nov 01, 2011 6:46 pm Post subject: Resolution wont stick!!??!! |
 |
|
I am still fighting a screen resolution problem. I play around with emerging nvidia-drivers and then -uDNv world and then check /etc/X11/xorg.conf.d.20-nvidia.conf
| Code: | Section "Device"
Identifier "Card0"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen 0"
Device "Card0"
Monitor "Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Modes "1680x1050" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Modes "1680x1050" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
Depth 24
EndSubSection
EndSection
|
It will work for a bit and then when I reboot............ BACK to 1024x768 when I want it to 1680x1050. I need help with this PLEASE!!!! |
|
| Back to top |
|
 |
ferreirafm
Guru
Joined: 28 Jul 2005
Posts: 487
Location: Sao Paulo, Brazil
|
| Posted: Tue Nov 01, 2011 7:14 pm Post subject: |
|
|
Hi treyb,
Try to set your resolution using the nvidia-settings program. Backup your running xorg.conf and run the nvidia-settings as root.
G'Luck
Last edited by ferreirafm on Tue Nov 01, 2011 7:17 pm; edited 1 time in total |
|
| Back to top |
|
|
treyb
n00b
Joined: 20 Sep 2011
Posts: 51
|
| Posted: Tue Nov 01, 2011 7:15 pm Post subject: |
|
|
| tried that.... it too once I reboot will ONLY show 1024x768 |
|
| Back to top |
|
|
ferreirafm
Guru
Joined: 28 Jul 2005
Posts: 487
Location: Sao Paulo, Brazil
|
| Posted: Tue Nov 01, 2011 7:18 pm Post subject: |
|
|
I have edited my previous post.
Run it as root.
G'Luck |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
ferreirafm
Guru
Joined: 28 Jul 2005
Posts: 487
Location: Sao Paulo, Brazil
|
| Posted: Tue Nov 01, 2011 7:27 pm Post subject: |
|
|
treyb,
Usually the first mode is the default. Put the resolution you want in the beginning. |
|
| Back to top |
|
|
treyb
n00b
Joined: 20 Sep 2011
Posts: 51
|
| Posted: Tue Nov 01, 2011 7:38 pm Post subject: |
|
|
Here is the Xorg log file:
| Code: | cat /var/log/Xorg.0.log
[ 19.956]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 19.956] X Protocol Version 11, Revision 0
[ 19.956] Build Operating System: Linux 2.6.39-gentoo-r3 i686 Gentoo
[ 19.956] Current Operating System: Linux localhost 2.6.39-gentoo-r3 #1 SMP Fri Oct 7 03:22:39 EST 2011 i686
[ 19.956] Kernel command line: root=/dev/sda3
[ 19.956] Build Date: 07 October 2011 05:48:36AM
[ 19.956]
[ 19.956] Current version of pixman: 0.22.2
[ 19.956] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.956] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.957] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 1 08:34:23 2011
[ 20.159] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.159] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.246] (==) No Layout section. Using the first Screen section.
[ 20.246] (**) |-->Screen "Screen 0" (0)
[ 20.246] (**) | |-->Monitor "<default monitor>"
[ 20.246] (**) | |-->Device "Card0"
[ 20.246] (==) No monitor specified for screen "Screen 0".
Using a default monitor configuration.
[ 20.246] (==) Automatically adding devices
[ 20.246] (==) Automatically enabling devices
[ 20.475] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 20.475] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.475] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.475] (II) Loader magic: 0x81f5d00
[ 20.475] (II) Module ABI versions:
[ 20.475] X.Org ANSI C Emulation: 0.4
[ 20.475] X.Org Video Driver: 10.0
[ 20.475] X.Org XInput driver : 12.2
[ 20.475] X.Org Server Extension : 5.0
[ 20.476] (--) PCI:*(0:1:0:0) 10de:0421:19da:a012 rev 161, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00002000/128
[ 20.476] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.476] (II) LoadModule: "extmod"
[ 20.532] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.581] (II) Module extmod: vendor="X.Org Foundation"
[ 20.581] compiled for 1.10.4, module version = 1.0.0
[ 20.581] Module class: X.Org Server Extension
[ 20.581] ABI class: X.Org Server Extension, version 5.0
[ 20.581] (II) Loading extension MIT-SCREEN-SAVER
[ 20.581] (II) Loading extension XFree86-VidModeExtension
[ 20.581] (II) Loading extension XFree86-DGA
[ 20.581] (II) Loading extension DPMS
[ 20.581] (II) Loading extension XVideo
[ 20.581] (II) Loading extension XVideo-MotionCompensation
[ 20.581] (II) Loading extension X-Resource
[ 20.581] (II) LoadModule: "dbe"
[ 20.581] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.586] (II) Module dbe: vendor="X.Org Foundation"
[ 20.586] compiled for 1.10.4, module version = 1.0.0
[ 20.586] Module class: X.Org Server Extension
[ 20.586] ABI class: X.Org Server Extension, version 5.0
[ 20.586] (II) Loading extension DOUBLE-BUFFER
[ 20.586] (II) LoadModule: "glx"
[ 20.654] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 21.665] (II) Module glx: vendor="NVIDIA Corporation"
[ 21.665] compiled for 4.0.2, module version = 1.0.0
[ 21.665] Module class: X.Org Server Extension
[ 21.665] (II) NVIDIA GLX Module 275.09.07 Wed Jun 8 16:01:21 PDT 2011
[ 21.665] (II) Loading extension GLX
[ 21.665] (II) LoadModule: "record"
[ 21.666] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 21.672] (II) Module record: vendor="X.Org Foundation"
[ 21.672] compiled for 1.10.4, module version = 1.13.0
[ 21.672] Module class: X.Org Server Extension
[ 21.672] ABI class: X.Org Server Extension, version 5.0
[ 21.672] (II) Loading extension RECORD
[ 21.672] (II) LoadModule: "dri"
[ 21.785] (WW) Warning, couldn't open module dri
[ 21.785] (II) UnloadModule: "dri"
[ 21.785] (II) Unloading dri
[ 21.785] (EE) Failed to load module "dri" (module does not exist, 0)
[ 21.785] (II) LoadModule: "dri2"
[ 21.785] (WW) Warning, couldn't open module dri2
[ 21.785] (II) UnloadModule: "dri2"
[ 21.785] (II) Unloading dri2
[ 21.785] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 21.785] (II) LoadModule: "nvidia"
[ 21.785] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 21.852] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 21.852] compiled for 4.0.2, module version = 1.0.0
[ 21.852] Module class: X.Org Video Driver
[ 21.872] (II) NVIDIA dlloader X Driver 275.09.07 Wed Jun 8 15:43:48 PDT 2011
[ 21.877] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 21.882] (++) using VT number 7
[ 21.894] (II) Loading sub module "fb"
[ 21.894] (II) LoadModule: "fb"
[ 21.894] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.900] (II) Module fb: vendor="X.Org Foundation"
[ 21.900] compiled for 1.10.4, module version = 1.0.0
[ 21.900] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.900] (II) Loading sub module "wfb"
[ 21.900] (II) LoadModule: "wfb"
[ 21.900] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 21.914] (II) Module wfb: vendor="X.Org Foundation"
[ 21.914] compiled for 1.10.4, module version = 1.0.0
[ 21.914] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.914] (II) Loading sub module "ramdac"
[ 21.914] (II) LoadModule: "ramdac"
[ 21.914] (II) Module "ramdac" already built-in
[ 21.925] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 21.925] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 21.925] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.930] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 21.930] (==) NVIDIA(0): RGB weight 888
[ 21.930] (==) NVIDIA(0): Default visual is TrueColor
[ 21.930] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 22.853] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 22.855] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 22.858] (II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
[ 22.858] (--) NVIDIA(0): Memory: 524288 kBytes
[ 22.858] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.00
[ 22.858] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 22.858] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 22.858] (--) NVIDIA(0): Connected display device(s) on GeForce 8500 GT at PCI:1:0:0
[ 22.858] (--) NVIDIA(0): CRT-0
[ 22.858] (--) NVIDIA(0): CRT-1
[ 22.858] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 22.858] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 22.887] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 22.887] (WW) NVIDIA(0): No valid modes for "1680x1050"; removing.
[ 22.887] (WW) NVIDIA(0): No valid modes for "1400x1050"; removing.
[ 22.887] (WW) NVIDIA(0): No valid modes for "1280x1024"; removing.
[ 22.887] (WW) NVIDIA(0): No valid modes for "1152x864"; removing.
[ 22.887] (II) NVIDIA(0): Validated modes:
[ 22.887] (II) NVIDIA(0): "1024x768"
[ 22.887] (II) NVIDIA(0): "800x600"
[ 22.887] (II) NVIDIA(0): "640x480"
[ 22.887] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 22.915] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 22.915] (WW) NVIDIA(0): from CRT-1's EDID.
[ 22.915] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 22.915] (--) Depth 24 pixmap format is 32 bpp
[ 22.915] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 22.920] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 22.920] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 22.920] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 22.920] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 22.920] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 22.920] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 22.920] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 22.920] (II) NVIDIA(0): Config Options in the README.
[ 22.925] (II) NVIDIA(0): Setting mode "1024x768"
[ 22.974] (II) Loading extension NV-GLX
[ 23.018] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 23.018] (==) NVIDIA(0): Backing store disabled
[ 23.018] (==) NVIDIA(0): Silken mouse enabled
[ 23.019] (==) NVIDIA(0): DPMS enabled
[ 23.019] (II) Loading extension NV-CONTROL
[ 23.020] (II) Loading extension XINERAMA
[ 23.020] (II) Loading sub module "dri2"
[ 23.020] (II) LoadModule: "dri2"
[ 23.020] (WW) Warning, couldn't open module dri2
[ 23.020] (II) UnloadModule: "dri2"
[ 23.020] (II) Unloading dri2
[ 23.020] (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
[ 23.020] (II) NVIDIA(0): The X server will not be able to send the VDPAU driver name to
[ 23.020] (II) NVIDIA(0): libvdpau.
[ 23.020] (==) RandR enabled
[ 23.020] (II) Initializing built-in extension Generic Event Extension
[ 23.020] (II) Initializing built-in extension SHAPE
[ 23.020] (II) Initializing built-in extension MIT-SHM
[ 23.020] (II) Initializing built-in extension XInputExtension
[ 23.020] (II) Initializing built-in extension XTEST
[ 23.020] (II) Initializing built-in extension BIG-REQUESTS
[ 23.020] (II) Initializing built-in extension SYNC
[ 23.020] (II) Initializing built-in extension XKEYBOARD
[ 23.020] (II) Initializing built-in extension XC-MISC
[ 23.020] (II) Initializing built-in extension XINERAMA
[ 23.020] (II) Initializing built-in extension XFIXES
[ 23.020] (II) Initializing built-in extension RENDER
[ 23.020] (II) Initializing built-in extension RANDR
[ 23.020] (II) Initializing built-in extension COMPOSITE
[ 23.020] (II) Initializing built-in extension DAMAGE
[ 23.024] (II) Initializing extension GLX
[ 23.586] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 23.586] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.586] (II) LoadModule: "evdev"
[ 23.587] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.596] (II) Module evdev: vendor="X.Org Foundation"
[ 23.596] compiled for 1.10.4, module version = 2.6.0
[ 23.596] Module class: X.Org XInput Driver
[ 23.596] ABI class: X.Org XInput driver, version 12.2
[ 23.596] (II) Using input driver 'evdev' for 'Power Button'
[ 23.596] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.596] (**) Power Button: always reports core events
[ 23.596] (**) Power Button: Device: "/dev/input/event1"
[ 23.601] (--) Power Button: Found keys
[ 23.601] (II) Power Button: Configuring as keyboard
[ 23.601] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 23.601] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 23.601] (**) Option "xkb_rules" "evdev"
[ 23.601] (**) Option "xkb_model" "evdev"
[ 23.601] (**) Option "xkb_layout" "us"
[ 23.630] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 23.630] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 23.630] (II) Using input driver 'evdev' for 'Sleep Button'
[ 23.630] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.630] (**) Sleep Button: always reports core events
[ 23.630] (**) Sleep Button: Device: "/dev/input/event0"
[ 23.634] (--) Sleep Button: Found keys
[ 23.634] (II) Sleep Button: Configuring as keyboard
[ 23.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0"
[ 23.634] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 23.634] (**) Option "xkb_rules" "evdev"
[ 23.634] (**) Option "xkb_model" "evdev"
[ 23.634] (**) Option "xkb_layout" "us"
[ 23.639] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event2)
[ 23.639] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[ 23.639] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 23.639] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.639] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 23.639] (**) Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event2"
[ 23.642] (--) Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[ 23.642] (II) Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[ 23.642] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.0/input/input2/event2"
[ 23.642] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD)
[ 23.642] (**) Option "xkb_rules" "evdev"
[ 23.642] (**) Option "xkb_model" "evdev"
[ 23.642] (**) Option "xkb_layout" "us"
[ 23.643] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event3)
[ 23.643] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[ 23.643] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 23.643] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.643] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 23.643] (**) Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event3"
[ 23.650] (--) Microsoft Natural® Ergonomic Keyboard 4000: Found 1 mouse buttons
[ 23.650] (--) Microsoft Natural® Ergonomic Keyboard 4000: Found scroll wheel(s)
[ 23.650] (--) Microsoft Natural® Ergonomic Keyboard 4000: Found relative axes
[ 23.650] (--) Microsoft Natural® Ergonomic Keyboard 4000: Found absolute axes
[ 23.650] (--) Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[ 23.650] (II) Microsoft Natural® Ergonomic Keyboard 4000: Configuring as mouse
[ 23.650] (II) Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[ 23.650] (II) Microsoft Natural® Ergonomic Keyboard 4000: Adding scrollwheel support
[ 23.650] (**) Microsoft Natural® Ergonomic Keyboard 4000: YAxisMapping: buttons 4 and 5
[ 23.650] (**) Microsoft Natural® Ergonomic Keyboard 4000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.1/input/input3/event3"
[ 23.650] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD)
[ 23.650] (**) Option "xkb_rules" "evdev"
[ 23.650] (**) Option "xkb_model" "evdev"
[ 23.650] (**) Option "xkb_layout" "us"
[ 23.650] (EE) Microsoft Natural® Ergonomic Keyboard 4000: failed to initialize for relative axes.
[ 23.650] (II) Microsoft Natural® Ergonomic Keyboard 4000: initialized for absolute axes.
[ 23.650] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) keeping acceleration scheme 1
[ 23.650] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration profile 0
[ 23.650] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[ 23.650] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[ 425.619] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 425.619] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 425.619] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 425.619] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 425.619] (**) Logitech Trackball: always reports core events
[ 425.619] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 425.624] (--) Logitech Trackball: Found 3 mouse buttons
[ 425.624] (--) Logitech Trackball: Found scroll wheel(s)
[ 425.624] (--) Logitech Trackball: Found relative axes
[ 425.624] (--) Logitech Trackball: Found x and y relative axes
[ 425.624] (II) Logitech Trackball: Configuring as mouse
[ 425.624] (II) Logitech Trackball: Adding scrollwheel support
[ 425.624] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 425.624] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 425.624] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input4/event4"
[ 425.624] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 425.624] (II) Logitech Trackball: initialized for relative axes.
[ 425.624] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 425.624] (**) Logitech Trackball: (accel) acceleration profile 0
[ 425.624] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 425.624] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 425.624] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 425.624] (II) No input driver/identifier specified (ignoring)
[ 1272.400] (II) config/udev: removing device Logitech Trackball
[ 1272.400] (II) Logitech Trackball: Close
[ 1272.400] (II) UnloadModule: "evdev"
[ 1272.400] (II) Unloading evdev
[ 1283.808] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 1283.808] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 1283.808] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 1283.808] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1283.808] (**) Logitech Trackball: always reports core events
[ 1283.808] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 1283.812] (--) Logitech Trackball: Found 3 mouse buttons
[ 1283.812] (--) Logitech Trackball: Found scroll wheel(s)
[ 1283.812] (--) Logitech Trackball: Found relative axes
[ 1283.812] (--) Logitech Trackball: Found x and y relative axes
[ 1283.812] (II) Logitech Trackball: Configuring as mouse
[ 1283.812] (II) Logitech Trackball: Adding scrollwheel support
[ 1283.812] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 1283.812] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1283.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input5/event4"
[ 1283.812] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 1283.812] (II) Logitech Trackball: initialized for relative axes.
[ 1283.812] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 1283.812] (**) Logitech Trackball: (accel) acceleration profile 0
[ 1283.812] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 1283.812] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 1283.812] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 1283.812] (II) No input driver/identifier specified (ignoring)
[ 1590.729] (II) config/udev: removing device Logitech Trackball
[ 1590.729] (II) Logitech Trackball: Close
[ 1590.729] (II) UnloadModule: "evdev"
[ 1590.729] (II) Unloading evdev
[ 1782.168] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 1782.168] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 1782.168] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 1782.168] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1782.168] (**) Logitech Trackball: always reports core events
[ 1782.168] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 1782.174] (--) Logitech Trackball: Found 3 mouse buttons
[ 1782.174] (--) Logitech Trackball: Found scroll wheel(s)
[ 1782.174] (--) Logitech Trackball: Found relative axes
[ 1782.174] (--) Logitech Trackball: Found x and y relative axes
[ 1782.174] (II) Logitech Trackball: Configuring as mouse
[ 1782.174] (II) Logitech Trackball: Adding scrollwheel support
[ 1782.174] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 1782.174] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1782.174] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input6/event4"
[ 1782.174] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 1782.174] (II) Logitech Trackball: initialized for relative axes.
[ 1782.174] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 1782.174] (**) Logitech Trackball: (accel) acceleration profile 0
[ 1782.174] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 1782.174] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 1782.174] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 1782.174] (II) No input driver/identifier specified (ignoring)
[ 1883.851] (II) config/udev: removing device Logitech Trackball
[ 1883.852] (II) Logitech Trackball: Close
[ 1883.852] (II) UnloadModule: "evdev"
[ 1883.852] (II) Unloading evdev
[ 1891.292] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 1891.292] (II) No input driver/identifier specified (ignoring)
[ 1891.293] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 1891.293] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 1891.294] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 1891.294] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1891.294] (**) Logitech Trackball: always reports core events
[ 1891.294] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 1891.297] (--) Logitech Trackball: Found 3 mouse buttons
[ 1891.297] (--) Logitech Trackball: Found scroll wheel(s)
[ 1891.297] (--) Logitech Trackball: Found relative axes
[ 1891.297] (--) Logitech Trackball: Found x and y relative axes
[ 1891.297] (II) Logitech Trackball: Configuring as mouse
[ 1891.297] (II) Logitech Trackball: Adding scrollwheel support
[ 1891.297] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 1891.297] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1891.297] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input7/event4"
[ 1891.297] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 1891.297] (II) Logitech Trackball: initialized for relative axes.
[ 1891.297] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 1891.297] (**) Logitech Trackball: (accel) acceleration profile 0
[ 1891.297] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 1891.297] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 2235.339] (II) config/udev: removing device Logitech Trackball
[ 2235.339] (II) Logitech Trackball: Close
[ 2235.339] (II) UnloadModule: "evdev"
[ 2235.339] (II) Unloading evdev
[ 2257.955] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 2257.955] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 2257.955] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 2257.955] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2257.955] (**) Logitech Trackball: always reports core events
[ 2257.955] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 2257.959] (--) Logitech Trackball: Found 3 mouse buttons
[ 2257.959] (--) Logitech Trackball: Found scroll wheel(s)
[ 2257.959] (--) Logitech Trackball: Found relative axes
[ 2257.959] (--) Logitech Trackball: Found x and y relative axes
[ 2257.959] (II) Logitech Trackball: Configuring as mouse
[ 2257.959] (II) Logitech Trackball: Adding scrollwheel support
[ 2257.959] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 2257.959] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2257.959] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input8/event4"
[ 2257.959] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 2257.959] (II) Logitech Trackball: initialized for relative axes.
[ 2257.959] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 2257.959] (**) Logitech Trackball: (accel) acceleration profile 0
[ 2257.959] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 2257.959] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 2257.959] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 2257.959] (II) No input driver/identifier specified (ignoring)
[ 2414.153] (II) config/udev: removing device Logitech Trackball
[ 2414.153] (II) Logitech Trackball: Close
[ 2414.153] (II) UnloadModule: "evdev"
[ 2414.153] (II) Unloading evdev
[ 2426.651] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 2426.651] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 2426.651] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 2426.651] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2426.651] (**) Logitech Trackball: always reports core events
[ 2426.651] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 2426.655] (--) Logitech Trackball: Found 3 mouse buttons
[ 2426.655] (--) Logitech Trackball: Found scroll wheel(s)
[ 2426.655] (--) Logitech Trackball: Found relative axes
[ 2426.655] (--) Logitech Trackball: Found x and y relative axes
[ 2426.655] (II) Logitech Trackball: Configuring as mouse
[ 2426.655] (II) Logitech Trackball: Adding scrollwheel support
[ 2426.655] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 2426.655] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2426.655] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input9/event4"
[ 2426.655] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 2426.655] (II) Logitech Trackball: initialized for relative axes.
[ 2426.655] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 2426.655] (**) Logitech Trackball: (accel) acceleration profile 0
[ 2426.655] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 2426.655] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 2426.656] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 2426.656] (II) No input driver/identifier specified (ignoring)
[ 2936.010] (II) config/udev: removing device Logitech Trackball
[ 2936.011] (II) Logitech Trackball: Close
[ 2936.011] (II) UnloadModule: "evdev"
[ 2936.011] (II) Unloading evdev
[ 2937.002] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 2937.002] (II) No input driver/identifier specified (ignoring)
[ 2937.003] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 2937.003] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 2937.003] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 2937.003] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2937.003] (**) Logitech Trackball: always reports core events
[ 2937.003] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 2937.009] (--) Logitech Trackball: Found 3 mouse buttons
[ 2937.009] (--) Logitech Trackball: Found scroll wheel(s)
[ 2937.009] (--) Logitech Trackball: Found relative axes
[ 2937.009] (--) Logitech Trackball: Found x and y relative axes
[ 2937.009] (II) Logitech Trackball: Configuring as mouse
[ 2937.009] (II) Logitech Trackball: Adding scrollwheel support
[ 2937.009] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 2937.009] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2937.009] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input10/event4"
[ 2937.009] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 2937.009] (II) Logitech Trackball: initialized for relative axes.
[ 2937.009] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 2937.009] (**) Logitech Trackball: (accel) acceleration profile 0
[ 2937.009] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 2937.009] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 2939.209] (II) config/udev: removing device Logitech Trackball
[ 2939.210] (II) Logitech Trackball: Close
[ 2939.210] (II) UnloadModule: "evdev"
[ 2939.210] (II) Unloading evdev
[ 2969.125] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 2969.125] (II) No input driver/identifier specified (ignoring)
[ 2969.126] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 2969.126] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 2969.126] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 2969.126] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2969.126] (**) Logitech Trackball: always reports core events
[ 2969.126] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 2969.130] (--) Logitech Trackball: Found 3 mouse buttons
[ 2969.130] (--) Logitech Trackball: Found scroll wheel(s)
[ 2969.130] (--) Logitech Trackball: Found relative axes
[ 2969.130] (--) Logitech Trackball: Found x and y relative axes
[ 2969.130] (II) Logitech Trackball: Configuring as mouse
[ 2969.130] (II) Logitech Trackball: Adding scrollwheel support
[ 2969.130] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 2969.130] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2969.130] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input11/event4"
[ 2969.130] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 2969.130] (II) Logitech Trackball: initialized for relative axes.
[ 2969.130] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 2969.130] (**) Logitech Trackball: (accel) acceleration profile 0
[ 2969.130] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 2969.130] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 2996.812] (II) config/udev: removing device Logitech Trackball
[ 2996.812] (II) Logitech Trackball: Close
[ 2996.812] (II) UnloadModule: "evdev"
[ 2996.812] (II) Unloading evdev
[ 3003.418] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 3003.418] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 3003.418] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 3003.419] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3003.419] (**) Logitech Trackball: always reports core events
[ 3003.419] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 3003.423] (--) Logitech Trackball: Found 3 mouse buttons
[ 3003.423] (--) Logitech Trackball: Found scroll wheel(s)
[ 3003.423] (--) Logitech Trackball: Found relative axes
[ 3003.423] (--) Logitech Trackball: Found x and y relative axes
[ 3003.423] (II) Logitech Trackball: Configuring as mouse
[ 3003.423] (II) Logitech Trackball: Adding scrollwheel support
[ 3003.423] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 3003.423] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3003.423] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input12/event4"
[ 3003.423] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 3003.423] (II) Logitech Trackball: initialized for relative axes.
[ 3003.423] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 3003.423] (**) Logitech Trackball: (accel) acceleration profile 0
[ 3003.423] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 3003.423] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 3003.423] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 3003.423] (II) No input driver/identifier specified (ignoring)
[ 3076.170] (II) config/udev: removing device Logitech Trackball
[ 3076.170] (II) Logitech Trackball: Close
[ 3076.171] (II) UnloadModule: "evdev"
[ 3076.171] (II) Unloading evdev
[ 3102.545] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 3102.545] (II) No input driver/identifier specified (ignoring)
[ 3102.545] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 3102.545] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 3102.546] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 3102.546] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3102.546] (**) Logitech Trackball: always reports core events
[ 3102.546] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 3102.550] (--) Logitech Trackball: Found 3 mouse buttons
[ 3102.550] (--) Logitech Trackball: Found scroll wheel(s)
[ 3102.550] (--) Logitech Trackball: Found relative axes
[ 3102.550] (--) Logitech Trackball: Found x and y relative axes
[ 3102.550] (II) Logitech Trackball: Configuring as mouse
[ 3102.550] (II) Logitech Trackball: Adding scrollwheel support
[ 3102.550] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 3102.550] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3102.550] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input13/event4"
[ 3102.550] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 3102.550] (II) Logitech Trackball: initialized for relative axes.
[ 3102.550] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 3102.550] (**) Logitech Trackball: (accel) acceleration profile 0
[ 3102.550] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 3102.550] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 3193.929] (II) config/udev: removing device Logitech Trackball
[ 3193.929] (II) Logitech Trackball: Close
[ 3193.929] (II) UnloadModule: "evdev"
[ 3193.929] (II) Unloading evdev
[ 3205.028] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 3205.028] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 3205.028] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 3205.028] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3205.028] (**) Logitech Trackball: always reports core events
[ 3205.028] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 3205.032] (--) Logitech Trackball: Found 3 mouse buttons
[ 3205.032] (--) Logitech Trackball: Found scroll wheel(s)
[ 3205.032] (--) Logitech Trackball: Found relative axes
[ 3205.032] (--) Logitech Trackball: Found x and y relative axes
[ 3205.032] (II) Logitech Trackball: Configuring as mouse
[ 3205.032] (II) Logitech Trackball: Adding scrollwheel support
[ 3205.032] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 3205.032] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3205.032] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input14/event4"
[ 3205.032] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 3205.032] (II) Logitech Trackball: initialized for relative axes.
[ 3205.032] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 3205.032] (**) Logitech Trackball: (accel) acceleration profile 0
[ 3205.032] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 3205.032] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 3205.036] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 3205.036] (II) No input driver/identifier specified (ignoring)
[ 4963.532] (II) config/udev: removing device Logitech Trackball
[ 4963.532] (II) Logitech Trackball: Close
[ 4963.552] (II) UnloadModule: "evdev"
[ 4963.552] (II) Unloading evdev
[ 4978.153] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 4978.153] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 4978.153] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 4978.153] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4978.153] (**) Logitech Trackball: always reports core events
[ 4978.153] (**) Logitech Trackball: Device: "/dev/input/event4"
[ 4978.157] (--) Logitech Trackball: Found 3 mouse buttons
[ 4978.157] (--) Logitech Trackball: Found scroll wheel(s)
[ 4978.157] (--) Logitech Trackball: Found relative axes
[ 4978.157] (--) Logitech Trackball: Found x and y relative axes
[ 4978.157] (II) Logitech Trackball: Configuring as mouse
[ 4978.157] (II) Logitech Trackball: Adding scrollwheel support
[ 4978.157] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 4978.157] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4978.157] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input15/event4"
[ 4978.157] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
[ 4978.157] (II) Logitech Trackball: initialized for relative axes.
[ 4978.157] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 4978.157] (**) Logitech Trackball: (accel) acceleration profile 0
[ 4978.157] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 4978.157] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 4978.157] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 4978.157] (II) No input driver/identifier specified (ignoring)
|
|
|
| Back to top |
|
|
ferreirafm
Guru
Joined: 28 Jul 2005
Posts: 487
Location: Sao Paulo, Brazil
|
| Posted: Tue Nov 01, 2011 7:45 pm Post subject: |
|
|
treyb,
It seems your monitor can't work with the resolution you want! Have you check the working resolutions of you monitor?
Did you try to write only one mode? |
|
| Back to top |
|
|
treyb
n00b
Joined: 20 Sep 2011
Posts: 51
|
| Posted: Tue Nov 01, 2011 7:47 pm Post subject: |
|
|
| The monitor works just fine with the resolution in windows............... used on a kvm switch (the same monitor) |
|
| Back to top |
|
|
ferreirafm
Guru
Joined: 28 Jul 2005
Posts: 487
Location: Sao Paulo, Brazil
|
| Posted: Tue Nov 01, 2011 7:51 pm Post subject: |
|
|
As I said, the first mode usually is the default one. You can put the resoltution you want in the beginning or make a test using just one mode. Give it a try.
G'Luck |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
treyb
n00b
Joined: 20 Sep 2011
Posts: 51
|
| Posted: Tue Nov 01, 2011 8:07 pm Post subject: |
|
|
I thought udev was supposed to eliminate the need for a xorg.conf, however without the 20-nvidia.conf it will no detect screens.
The resolution I want is first............. "1680x1050" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
Even though I want 1680x1050, I still want the ability to use the rest (this is the reason I did not have just that as the only res)
Also stupid question, How do I disable EDID |
|
| Back to top |
|
|
gerard27
Advocate
Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
|
| Posted: Tue Nov 01, 2011 8:33 pm Post subject: |
|
|
I had problems with my display size not correct.
I ended up with this xorg.conf.
Maybe it'll be useful to you. | Code: |
Section "InputClass"
Identifier "keyboard-all"
Driver "evdev"
Option "XkbLayout" "us_intl"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
MatchIsKeyboard "on"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "RandRRotation" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "VideoCard0"
Monitor "Monitor0"
Option "UseEDIDDPI" "False"
Option "DPI" "94 x 94"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
ModulePath "/usr/lib64/opengl/xorg-x11/extensions/"
EndSection
# (These data were taken from LP2475w edid)
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:fc
Identifier "HP LP2475w"
VendorName "HWP"
ModelName "HP LP2475w"
# Block type: 2:0 3:fc
# Block type: 2:0 3:fd
HorizSync 30-94
VertRefresh 48-85
# Max dot clock (video bandwidth) 170 MHz
# Block type: 2:0 3:ff
# DPMS capabilities: Active off:yes Suspend:yes Standby:yes
Mode "1920x1200" # vfreq 59.950Hz, hfreq 74.038kHz
DotClock 154.000000
HTimings 1920 1968 2000 2080
VTimings 1200 1203 1209 1235
Flags "-HSync" "+VSync"
EndMode
# Block type: 2:0 3:fc
# Block type: 2:0 3:fd
# Block type: 2:0 3:ff
Option "DPMS" "True"
EndSection |
I can change my resolution in KDE w/o problem.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download |
|
| Back to top |
|
|
s_bernstein
Apprentice
Joined: 11 Mar 2006
Posts: 172
Location: Bremen, Germany
|
| Posted: Wed Nov 02, 2011 6:12 am Post subject: |
|
|
| treyb wrote: | | The monitor works just fine with the resolution in windows............... used on a kvm switch (the same monitor) |
If you are running the monitor on a kvm switch, that might be the source of your problem. The kvm switch might either don't report an EDID at all or report a default one. This behavior might change depending on the active input port. So you should try to run you monitor without the switch to ensure it's not the driver or the monitor. If the switch is causing the problem, you should try to start your xserver with the monitor active on your kvm. If it fails, you'll know the kvm is sending a bad EDID and you have to setup your monitor the old fashion way. |
|
| Back to top |
|
|
dE_logics
Advocate
Joined: 02 Jan 2009
Posts: 2253
Location: $TERM
|
| Posted: Wed Nov 02, 2011 12:55 pm Post subject: |
|
|
| treyb wrote: | I thought udev was supposed to eliminate the need for a xorg.conf, however without the 20-nvidia.conf it will no detect screens.
The resolution I want is first............. "1680x1050" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
Even though I want 1680x1050, I still want the ability to use the rest (this is the reason I did not have just that as the only res)
Also stupid question, How do I disable EDID |
In X logs, it complained it couldn't read EEID, but I found no way to disable it.
Do you use a DE?
_________________
My blog |
|
| Back to top |
|
|
treyb
n00b
Joined: 20 Sep 2011
Posts: 51
|
| Posted: Wed Nov 02, 2011 7:24 pm Post subject: |
|
|
I created a /etc/X11/xorg.conf and it seems to work throughout the reboots. Below is what I got. Why is udev not doing what it is supposed to and forcing me to create the config file? Did I miss a kernel setting?
I just read the new post that for some reason did not report to me that were posted, but the KVM switch would screw up all the setting for udev? If it does this would be the reason why I am forced for a xorg.conf
| Code: | Section "Module"
Disable "dri"
Disable "dri2"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "RandRRotation" "true"
EndSection
Section "Monitor"
Identifier "Dell2208WFPT"
VendorName "Dell"
ModelName "2208WFPT"
Option "UseEDIDDPI" "False"
EndSection
Section "Screen"
Identifier "Screen 0"
Device "Card0"
Monitor "Dell2208WFPT"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Modes "1680x1050"
Depth 24
EndSubSection
EndSection
|
|
|
| Back to top |
|
|
freddan
n00b
Joined: 28 Sep 2011
Posts: 7
|
| Posted: Sat Nov 05, 2011 5:03 pm Post subject: |
|
|
I had a similar problem but after i put in this in my config everything works fine.Maby what you need to.
HorizSync 30.0-81.0 <<<--------- check what your screen needs
VertRefresh 56.0-75.0 <<<---------
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung "
ModelName "Samsung 226bw"
HorizSync 30.0-81.0
VertRefresh 56.0-75.0
EndSection |
|
| Back to top |
|
|
krinn
Watchman
Joined: 02 May 2003
Posts: 7470
|
| Posted: Sat Nov 05, 2011 6:35 pm Post subject: |
|
|
Have a look on how i've get edid for my screen there : https://forums.gentoo.org/viewtopic-t-894978-highlight-nvidia.html
Might help you.
And it's not udev, if nvidia cannot read your edid (and this might comes from your kvm switch), nvidia won't know what monitor you are using and default to classic svga (1024...) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
