Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
? Dmesg init ?
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
JohnT.Clark
Tux's lil' helper
Tux's lil' helper


Joined: 09 Sep 2003
Posts: 95
Location: Italy

PostPosted: Sat Sep 27, 2003 6:02 pm    Post subject: ? Dmesg init ? Reply with quote

oggi mentre giochicchiavo col dsmeg ho lanciato questo comando

Code:

bash-2.05b# dmesg init
1    1    0   1   0    1    1    B1
 17 001 01  1    1    0   1   0    1    1    B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1615.0989 MHz.
..... host bus clock speed is 100.0999 MHz.
Starting migration thread for cpu 0
CPUS done 2
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfa140, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: the driver 'system' has been registered
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fab20
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xab50, dseg 0xf0000
pnp: match found with the PnP device '00:08' and the driver 'system'
pnp: match found with the PnP device '00:09' and the driver 'system'
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX [8086/2440] at 0000:00:1f.0
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P2) -> 23
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I1,P0) -> 21
PCI->APIC IRQ transform: (B2,I2,P0) -> 22
vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 16384k
vesafb: mode is 800x600x24, linelength=2400, pages=92
vesafb: protected mode interface info at c000:56ad
vesafb: scrolling: redraw
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
fb0: VESA VGA frame buffer device
Console: switching to colour frame buffer device 100x37
pty: 256 Unix98 ptys configured
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
ikconfig 0.6 with /proc/ikconfig
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver 2.1.4 [Flags: R/O].
udf: registering filesystem
PCI: Via IRQ fixup for 0000:02:02.0, from 5 to 6
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:0c' and the driver 'serial'
pnp: match found with the PnP device '00:10' and the driver 'serial'
Using anticipatory scheduling io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 18
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SV0844A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
pnp: the driver 'ide' has been registered
hda: max request size: 128KiB
hda: 16514064 sectors (8455 MB) w/220KiB Cache, CHS=16383/16/63, UDMA(33)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Console: switching to colour frame buffer device 100x37
ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci-hcd: block sizes: ed 64 td 64
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci-hcd 0000:00:1f.2: irq 19, io base 0000b000
uhci-hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
uhci-hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci-hcd 0000:00:1f.4: irq 23, io base 0000b800
uhci-hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:0: USB hub found
hub 2-0:0: 2 ports detected
uhci-hcd 0000:02:02.0: UHCI Host Controller
uhci-hcd 0000:02:02.0: irq 22, io base 0000a400
uhci-hcd 0000:02:02.0: new USB bus registered, assigned bus number 3
hub 3-0:0: USB hub found
hub 3-0:0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver usbscanner
drivers/usb/image/scanner.c: 0.4.14:USB Scanner Driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
Advanced Linux Sound Architecture Driver Version 0.9.6 (Wed Aug 20 20:27:13 2003 UTC).
PCI: Setting latency timer of device 0000:00:1f.5 to 64
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
intel8x0: clocking to 48000
ALSA device list:
  #0: Intel 82801BA-ICH2 at 0xbc00, irq 17
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
IPv4 over IPv4 tunneling driver
NET: Registered protocol family 1
NET: Registered protocol family 17
hub 1-1:0: USB hub found
hub 1-1:0: 4 ports detected
found reiserfs format "3.6" with standard journal
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
hub 1-0:0: new USB device on port 2, assigned address 3
Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
input: USB HID v1.10 Mouse [Microsoft Microsoft Wireless Intellimouse Explorer® 1.0A] on usb-0000:00:1f.2-2
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 344k freed
Adding 506036k swap on /dev/hda2.  Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[fglrx] module loaded - fglrx 3.2.5 [Aug  6 2003] on minor 0
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:0f' and the driver 'parport_pc'
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: ASUS      Model: CD-S500/A         Rev: 1.2C
  Type:   CD-ROM                             ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 50x/50x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: LITE-ON   Model: LTR-32123S        Rev: XS0Z
  Type:   CD-ROM                             ANSI SCSI revision: 02
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 5
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xe1970000, 00:40:f4:5d:d7:92, IRQ 21
eth0:  Identified 8139 chip type 'RTL-8139C'
i2c /dev entries driver module version 2.7.0 (20021208)
i2c-i801 version 2.7.0 (20021208)
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda4) for (hda4)
Using r5 hash to sort names
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
[fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
[fglrx] free  AGP = 54800384
[fglrx] max   AGP = 54800384
[fglrx] free  LFB = 126177280
[fglrx] max   LFB = 126177280
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 16384
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
 [<c011f5e0>] __might_sleep+0x5f/0x72
 [<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
 [<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
 [<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
 [<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
 [<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
 [<c016c826>] sys_ioctl+0x124/0x2d2
 [<c010b18f>] syscall_call+0x7/0xb


ed è uscita tutta sta pappinata di roba ( che da quello che ho capito è una specie di log del boot ), mentre lo scorrevo ho trovato questa riga

Code:

mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
[fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)

mi devo preoccupare o è normale la cosa? ho un i845 come chipset, la video è una Rad 9200, uso Xfree 4.3, kernel 2.6 develop test5 ( ma ormai dovreste saperlo, tutte le volte che vi ho rotto le balle :mrgreen: )

e poi tutte le righe sotto con Debug sono normali ho ho sbagliato qualc nella compilazione/configurazione del kernel/systema :?:

CiauZ
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno :D "

YoShi ®
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum