| View previous topic :: View next topic |
| Author |
Message |
giims
Tux's lil' helper
Joined: 16 Aug 2011
Posts: 86
|
 Posted: Mon Jan 16, 2012 9:33 pm Post subject: [filesystem]error read only filesystem a chaque commande |
 |
|
bonjour, j'ai démarrer ma gentoo a l'instant et impossible de démarrer kde ou une quelconque application que ce soit même emerge --sync ou eix--sync me renvoi cette erreur read only filesystem. tous mes fichier sont en lecteur seul je ne comprend pas ce qui c'est passer peut etre certain on déjà rencontré ce problème.
Last edited by giims on Mon Jan 16, 2012 9:45 pm; edited 1 time in total |
|
| Back to top |
|
 |
guilc
Bodhisattva
Joined: 15 Nov 2003
Posts: 3326
Location: Paris - France
|
| Posted: Mon Jan 16, 2012 9:41 pm Post subject: |
|
|
Dis, ça fait quelques temps que tu es ici, tu connais les conventions de notre forum non ?. Ben alors, et le titre ? 
Si ton FS est en readonly, il doit y avoir corruption. Regarde ce que tu peux voir dans les logs. Il devrait y avoir des choses au moment ou le kernel décide de remonter le FS en lecture seule.
Tu peux aussi booter sur un live CD/USB et faire un petit fsck du filesystem offline.
_________________
Merci de respecter les règles du forum.
Mon site perso : https://www.xwing.info
Mon PORTDIR_OVERLAY : https://gentoo.xwing.info ou layman -a xwing |
|
| Back to top |
|
|
giims
Tux's lil' helper
Joined: 16 Aug 2011
Posts: 86
|
| Posted: Mon Jan 16, 2012 9:49 pm Post subject: |
|
|
désolé pour le titre je ne savait pas trop quoi mettre pour que ce soit expressif je pence que la c'est bon? 
Dans quelle fichier log dois-je regarder? je me rappelle avoir éxécuter :
| Code: | | eix-sync et eix-update |
la dernière fois que j'ai rebooter.
Pour fsck la commande est bien : |
|
| Back to top |
|
|
guilc
Bodhisattva
Joined: 15 Nov 2003
Posts: 3326
Location: Paris - France
|
| Posted: Mon Jan 16, 2012 10:08 pm Post subject: |
|
|
| giims wrote: | | Dans quelle fichier log dois-je regarder? |
Ca dépend de la conf de ton logguer. /var/log/syslog ou /var/log/message
Voire un simple "dmesg" qui devrait remonter aussi les infos utiles.
| Quote: | | Pour fsck la commande est bien : |
Oui, mais sur le livecd : le filesystem doit être offline. S'il s'agit d'une simple corruption du FS, ça devrait régler le problème. Ca peut aussi être plus grave pour la santé du disque dur, mais attendons avant de penser au pire 
_________________
Merci de respecter les règles du forum.
Mon site perso : https://www.xwing.info
Mon PORTDIR_OVERLAY : https://gentoo.xwing.info ou layman -a xwing |
|
| Back to top |
|
|
giims
Tux's lil' helper
Joined: 16 Aug 2011
Posts: 86
|
| Posted: Mon Jan 16, 2012 11:30 pm Post subject: |
|
|
Ok je vais essayer. Les disque sont neuf.
EDIT: sous system rescue un volume raid ne ce lance pas c'est le volume de ma partition racine :
| Code: | ARRAY /dev/md/1_0 metadata=0.90 UUID=1b3499af:b185cf3e:cb201669:f728008a
ARRAY /dev/md/4_0 metadata=0.90 UUID=60955be6:b0c3c0ad:cb201669:f728008a
mdadm: md device /dev/md125 does not appear to be active.
mdadm: cannot open /dev/md/3_0: No such file or directory
|
de plus sur /dev/md/1_0 aucune erreur mais sur /dev/md/4_0 tous les inodes m'affiche une erreur a fixer avec la touche y |
|
| Back to top |
|
|
guilc
Bodhisattva
Joined: 15 Nov 2003
Posts: 3326
Location: Paris - France
|
| Posted: Tue Jan 17, 2012 6:10 pm Post subject: |
|
|
Donc il y a eu de la corruption du FS de 4_0. Soit tu arrives à fixer avec fsck, soit tu devras te résoudre à récupérer ce que tu peux récupérer en le copiant ailleurs, puis formater de la partition pour ravoir un FS d'équerre...
Ca serait quand même bien d'arriver à assembler 3_0. C'est pas bien normal qu'il n'y arrive pas, il doit souffrir du même problème que 4_0...
* Dans tous les cas, fouille les logs (/var/log/syslog, /var/log/message, voir /var/log/kern.log) pour essayer d'identifier à un moment ou à un autre le kernel n'aurait pas loggué des choses à propos d'erreurs disque (grep kernel /var/log/* peut-être ?).
* Ça peut aussi être un problème d'arrêt disque non synchronisé (qui ne sera pas visible dans les logs).
* Un petit diagnostic smart ne peut pas faire de mal. C'est installé sur le systemrescuecd :
- d'abord un petit "smartctl -a /dev/sdX" pour voir le bilan et les indicateurs de base du disque
- puis un petit "smartctl -t long /dev/sdX", puis beaucoup de patience que le test finisse, puis un "smartctl --log=selftest /dev/sda" pour lire le résultat du test.
Honnêtement, vu la quantité de problèmes sur 2 partitions en même temps, entre les corruptions et le raid qui ne s'assemble pas.... J'aurais tendance à accuser le matériel. Les disques neufs qui sont morts au déballage, ça arrive (j'ai eu droit à une série consécutive de 3 disques défectueux au déballage il y a quelques années !!). Mais je suis sans doute pessimiste !
_________________
Merci de respecter les règles du forum.
Mon site perso : https://www.xwing.info
Mon PORTDIR_OVERLAY : https://gentoo.xwing.info ou layman -a xwing |
|
| Back to top |
|
|
giims
Tux's lil' helper
Joined: 16 Aug 2011
Posts: 86
|
| Posted: Tue Jan 17, 2012 6:32 pm Post subject: |
|
|
aucun des fichiers log que tu as cité ne sont sur le systeme, je vais donc faire les test avec smartctrl.
| Code: | root@sysresccd /root % smartctl -a /dev/sda
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0.13-std241-i586] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD10EALX-009BA0
Serial Number: WD-WCATR9629417
LU WWN Device Id: 5 0014ee 2b1227752
Firmware Version: 15.01H15
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jan 17 19:29:52 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15660) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 182) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 178 178 021 Pre-fail Always - 4075
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 30
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 165
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 30
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 10
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 19
194 Temperature_Celsius 0x0022 120 089 000 Old_age Always - 27
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@sysresccd /root % smartctl -a /dev/sdb
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0.13-std241-i586] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD10EALX-009BA0
Serial Number: WD-WCATR9196621
LU WWN Device Id: 5 0014ee 2b110aa14
Firmware Version: 15.01H15
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jan 17 19:33:04 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (17760) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 205) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 175 175 021 Pre-fail Always - 4233
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 26
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 37
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 24
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 10
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 15
194 Temperature_Celsius 0x0022 118 100 000 Old_age Always - 29
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@sysresccd /root % smartctl -a /dev/sdc
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0.13-std241-i586] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD10EALX-009BA0
Serial Number: WD-WCATR9675201
LU WWN Device Id: 5 0014ee 25bcea8e5
Firmware Version: 15.01H15
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jan 17 19:33:14 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (16860) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 195) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 175 174 021 Pre-fail Always - 4233
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 38
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 165
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 16
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 21
194 Temperature_Celsius 0x0022 118 101 000 Old_age Always - 29
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
lorsque je lance smartctl -t long /dev/sdX j'obtient :
| Code: | smartctl -t long /dev/sdc
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0.13-std241-i586] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 195 minutes for test to complete.
Test will complete after Tue Jan 17 22:52:32 2012
Use smartctl -X to abort tes |
t.
et je doi utiliser la commande smartctl --log=selftest /dev/sdX pour lire le resultat du test c'est bien sa? |
|
| Back to top |
|
|
guilc
Bodhisattva
Joined: 15 Nov 2003
Posts: 3326
Location: Paris - France
|
| Posted: Tue Jan 17, 2012 7:21 pm Post subject: |
|
|
| giims wrote: | | aucun des fichiers log que tu as cité ne sont sur le systeme, je vais donc faire les test avec smartctrl. |
Il y en a forcément au moins un !
/var/log/syslog est le log "fourre-tout" par défaut de sysklogd
/var/log/message est le log "fourre-tout" par défaut de syslog-ng et (je crois) metalog
Tu as du passer à côté
| Quote: | lorsque je lance smartctl -t long /dev/sdX j'obtient :
| Code: | smartctl -t long /dev/sdc
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0.13-std241-i586] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 195 minutes for test to complete.
Test will complete after Tue Jan 17 22:52:32 2012
Use smartctl -X to abort tes |
t.
et je doi utiliser la commande smartctl --log=selftest /dev/sdX pour lire le resultat du test c'est bien sa? |
Oui, mais attend 195 minutes, durée estimée du test (oui, j'ai bien dit qu'il fallait attendre longtemps).
Tu peux faire la commande avant of course, mais il n'y aura pas de résultat dans la liste (ou alors il aura un résultat indiquant que le test a stoppé sur une erreur...)
Tu devras voir apparaître une liste avec un résultat (du genre "# 1 Extended offline Completed without error 00% 7479 -")
_________________
Merci de respecter les règles du forum.
Mon site perso : https://www.xwing.info
Mon PORTDIR_OVERLAY : https://gentoo.xwing.info ou layman -a xwing |
|
| Back to top |
|
|
Poussin
l33t
Joined: 08 Jun 2007
Posts: 659
Location: Liège
|
| Posted: Tue Jan 17, 2012 7:35 pm Post subject: |
|
|
| en fait, c'est messages, et non pas message par défaut pour syslog-ng, mais j'ose espérer que tu as regarder dans le répertoire après quelque chose d'équivalent. Faut savoir adapter un peu |
|
| Back to top |
|
|
giims
Tux's lil' helper
Joined: 16 Aug 2011
Posts: 86
|
| Posted: Wed Jan 18, 2012 6:06 pm Post subject: |
|
|
voici les résultats:
| Code: |
sda :
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0.13-std241-i586] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 168 -
# 2 Extended offline Aborted by host 90% 165 -
sdb:
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0.13-std241-i586] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 40 -
sdc :
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0.13-std241-i586] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 168 -
|
| Code: | ls -l /var/log
drwxr-xr-x 2 root root 4096 2 janv. 02:06 ConsoleKit
drwxr-xr-x 2 root root 4096 1 janv. 23:45 cups
-rw-r----- 1 root root 71204 18 janv. 19:46 dmesg
-rw-rw---- 1 portage portage 4241 6 janv. 20:44 emerge-fetch.log
-rw-rw---- 1 portage portage 468452 13 janv. 21:33 emerge.log
-rw-r--r-- 1 root root 292292 13 janv. 21:25 lastlog
-rw-r--r-- 1 root root 25667 13 janv. 21:26 pm-powersave.log
drwxrws--- 3 portage portage 4096 8 déc. 06:17 portage
drwxrwxr-x 2 root portage 4096 2 janv. 02:08 porthole
drwxrwx--- 2 root portage 4096 8 déc. 08:04 sandbox
-rw------- 1 root root 64064 13 janv. 21:25 tallylog
-rw-rw-r-- 1 root utmp 345216 14 janv. 04:12 wtmp
-rw-r--r-- 1 root root 18968 14 janv. 04:12 Xorg.0.log
-rw-r--r-- 1 root giims 18968 13 janv. 21:19 Xorg.0.log.old
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
