| View previous topic :: View next topic |
| Author |
Message |
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
 Posted: Mon Sep 22, 2003 10:25 am Post subject: Kde mooooolto instabile |
 |
|
Ancora nn sono riuscito a capire la causa dei frequentissimi crash del mio KDE.
Infatti è sufficiente che io apra una Shell e una finestra ( qualsiasi, da Mozilla, Konqueror, ecc..) e la trascini un po sullo schermo per avere il blocco totale del sistema, xchè neanche andando a richiamare le altre console virtuali riesco a sbloccare la situazione.
Rimane li con le finestre bloccate e l'unica cosa che riesco a fare è muovere il mouse ( inutilmente )
Il kernel è il 2.6.0-test5 (developer-suorces) e kde è alla 3.1.3 può essere il kernel? oppure è proprio Kde che fa tutti sti casini?
P.S. altra fastidiosissima cosa è che nn mi salva le impostazioni del mio user normale, infatti ogni volta che loggo con l'utente normale, il sistema ritorna all'inizio, come fosse il primo log che faccio con quell'utente e, lo fa solamente quando riavvio o spengo il pc
Che posso fare? 
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno  "
YoShi ® |
|
| Back to top |
|
 |
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30996
Location: here
|
| Posted: Mon Sep 22, 2003 11:08 am Post subject: |
|
|
Forse non sentra niente ma in questo periodo e' meglio domandare
che versione di gcc usi?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Mon Sep 22, 2003 11:36 am Post subject: |
|
|
Sto usando la 3.2.3-r1, è quella che mi ha installato all'inizio con emerge system
xchè potrebbe essere lei la causa di tutto?
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30996
Location: here
|
| Posted: Mon Sep 22, 2003 11:57 am Post subject: |
|
|
| JohnT.Clark wrote: | Sto usando la 3.2.3-r1, è quella che mi ha installato all'inizio con emerge system
xchè potrebbe essere lei la causa di tutto? |
No il problema ce l'ha avuto chi ha installato il gcc 3.3.1-r2 ma se non
hai attivo ACCEPT_KEYWORD non corri rischi.
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Mon Sep 22, 2003 12:29 pm Post subject: |
|
|
No il problema ce l'ha avuto chi ha installato il gcc 3.3.1-r2 ma se non
hai attivo ACCEPT_KEYWORD non corri rischi.[/quote]
Come faccio a verificarlo?
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
doom.it
Guru
Joined: 23 May 2003
Posts: 430
Location: Pavia, Italy
|
| Posted: Mon Sep 22, 2003 12:57 pm Post subject: |
|
|
qpkg -I -v gcc
_________________
I have discovered photography. Now I can kill myself. I have nothing else to learn.
Pablo Picasso |
|
| Back to top |
|
|
bubble27
Guru
Joined: 07 Aug 2003
Posts: 365
Location: Campobasso
|
| Posted: Mon Sep 22, 2003 1:20 pm Post subject: |
|
|
JohnT.Clark hai o avevi installato altre versioni di kde prima ???
se si prova a cancellare le .kde (e affini) dalla home e ristartare il tutto !!!!
 soluzione Windowsiana............. |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30996
Location: here
|
| Posted: Mon Sep 22, 2003 1:33 pm Post subject: |
|
|
| bubble27 wrote: | JohnT.Clark hai o avevi installato altre versioni di kde prima ???
se si prova a cancellare le .kde (e affini) dalla home e ristartare il tutto !!!!
soluzione Windowsiana............. |
No basta che cancella tutti i .kde e poi fa ripartire il tutto.
Un'altra cosa a me dava problemi e' perche' non mi ha disinstallato la
versione precedente quindi se fai
| Code: | | # epm -qa | grep kde |
vedi se hai le due versioni. Se e' il caso togli tutti i pacchetti vecchi
e rifai partire.
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Mon Sep 22, 2003 3:37 pm Post subject: |
|
|
No no, nn avevo versioni precedenti, ma ho notato una cosa, a volte nn mi fa il mount di
/dev/hda4 -- /home, mi sa che è per questo che con l'utente normale mi fa casino
l'ho scoperto per caso, xchè acceso il pc era sparita la cartella /home/Roberto/Documenti ma erano comparsi dei file che erano spariti, come il distfile.iso del backup che ho fatto (che era sempre in home) così ho aperto Kdiskfree e ho visto che /home era smontato...come è possibile cio?
vi posto il mio fstab x vedere se ho fatto qualche cacchiata
| Code: |
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1 /boot ext3 noauto,noatime 1 1
/dev/hda3 / reiserfs noatime 1 2
/dev/hda2 none swap sw 0 0
/dev/hda4 /home reiserfs noatime 1 3
/dev/cdrom /mnt/cdrom iso9660 noauto,ro,users 0 0
/dev/cdrecorder /mnt/cdrecorder iso9660 noauto,users 0 0
/dev/fd0 /mnt/floppy auto noauto,users 0 0
# NOTE: The next line is critical for boot!
none /proc proc defaults 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
# Adding the following line to /etc/fstab should take care of this:
none /dev/shm tmpfs defaults 0 0
|
Xchè se lancio questi 2 progz mi da "command not found?" ho provato sempre da root sia con X attivo che da console ma nada...
| doom.it wrote: | | qpkg -I -v gcc |
| fedeliallalinea wrote: | | # epm -qa | grep kde |
CiauZ[/quote]
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
shev
Bodhisattva
Joined: 03 Feb 2003
Posts: 4084
Location: Italy
|
| Posted: Mon Sep 22, 2003 3:41 pm Post subject: |
|
|
| JohnT.Clark wrote: |
/dev/hda1 /boot ext3 noauto,noatime 1 1
/dev/hda3 / reiserfs noatime 1 2
/dev/hda2 none swap sw 0 0
/dev/hda4 /home reiserfs noatime 1 3
/dev/cdrom /mnt/cdrom iso9660 noauto,ro,users 0 0
/dev/cdrecorder /mnt/cdrecorder iso9660 noauto,users 0 0
/dev/fd0 /mnt/floppy auto noauto,users 0 0
|
Prova a mettere "0 0" ad ogni voce, esclusa /boot che resta "1 1", e facci sapere (il resto sembra normale).
| Quote: | | Xchè se lancio questi 2 progz mi da "command not found?" ho provato sempre da root sia con X attivo che da console ma nada... |
Fanno parte del pacchetto gentoolkit, se non l'hai installato provvedi ed avrai tali utilissimi comandi 
_________________
Se per vivere ti dicono "siediti e stai zitto" tu alzati e muori combattendo |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30996
Location: here
|
| Posted: Mon Sep 22, 2003 5:08 pm Post subject: |
|
|
| Shev wrote: | | Fanno parte del pacchetto gentoolkit, se non l'hai installato provvedi ed avrai tali utilissimi comandi |
Beccato in fallo ... qpkg fa parte del pacchetto gentoolkit mentre epm
fa parte del pacchetto epm.
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Mon Sep 22, 2003 10:00 pm Post subject: |
|
|
Cmq ho messo tutti 0 0 tranne /boot come ha suggerito Shev
adesso bisogna usare pazienza, voglio provarlo un paio di giorni, x vere se fa ancora il pirla poi vi dirò
Cmq la cosa strana è che lo fa solo con l'utente User e non con Root...bho..
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Tue Sep 23, 2003 6:53 am Post subject: |
|
|
Scusa ma... dici che a volte non ti monta /home e che kde cragna???? Io proverei un kernel 2.4...
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
shev
Bodhisattva
Joined: 03 Feb 2003
Posts: 4084
Location: Italy
|
| Posted: Tue Sep 23, 2003 2:13 pm Post subject: |
|
|
| JohnT.Clark wrote: |
Cmq la cosa strana è che lo fa solo con l'utente User e non con Root...bho.. |
Forse perchè root la sua home l'ha in /root, non in /home
_________________
Se per vivere ti dicono "siediti e stai zitto" tu alzati e muori combattendo |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Tue Sep 23, 2003 4:50 pm Post subject: |
|
|
| cerri wrote: | | Scusa ma... dici che a volte non ti monta /home e che kde cragna???? Io proverei un kernel 2.4... |
ci avevo pensato anche io...ma se metto il 2.4 devo reinstallarmi qualche pacchetto o driver?
| Shev wrote: |
Forse perchè root la sua home l'ha in /root, non in /home
|
Nn può essere l'hd? o la partizione mal creata? visto che lo fa solo con /home?
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Tue Sep 23, 2003 4:55 pm Post subject: |
|
|
| JohnT.Clark wrote: | | ci avevo pensato anche io...ma se metto il 2.4 devo reinstallarmi qualche pacchetto o driver? |
Dipende da quello che hai installato... cmq non dovrebbe.
| JohnT.Clark wrote: | | Nn può essere l'hd? o la partizione mal creata? visto che lo fa solo con /home? |
E' strano. Ma non noti niente di strano al boot, con il comando dmesg, ecc quando il sistema non monta /home?
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
shev
Bodhisattva
Joined: 03 Feb 2003
Posts: 4084
Location: Italy
|
| Posted: Tue Sep 23, 2003 5:07 pm Post subject: |
|
|
| JohnT.Clark wrote: |
Nn può essere l'hd? o la partizione mal creata? visto che lo fa solo con /home? |
Non ho capito se ti fa ancora quel problema 
_________________
Se per vivere ti dicono "siediti e stai zitto" tu alzati e muori combattendo |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Mon Sep 29, 2003 5:31 pm Post subject: |
|
|
credo di esserci...
allora mentre giochettavo x capire come fungeva dmesg ho lanciato questo comando
| Code: |
bash-2.05b# dmesg init
he: 256K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Pentium(R) 4 CPU 1600MHz stepping 0a
per-CPU timeslice cutoff: 731.37 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-11, 2-18, 2-20 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 21.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 000 00 1 0 0 0 0 0 0 00
0a 001 01 0 0 0 0 0 1 1 69
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 001 01 1 1 0 1 0 1 1 99
12 000 00 1 0 0 0 0 0 0 00
13 001 01 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 A9
16 001 01 1 1 0 1 0 1 1 B1
17 001 01 1 1 0 1 0 1 1 B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1615.0983 MHz.
..... host bus clock speed is 100.0998 MHz.
Starting migration thread for cpu 0
CPUS done 2
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfa140, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: the driver 'system' has been registered
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fab20
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xab50, dseg 0xf0000
pnp: match found with the PnP device '00:08' and the driver 'system'
pnp: match found with the PnP device '00:09' and the driver 'system'
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX [8086/2440] at 0000:00:1f.0
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P2) -> 23
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I1,P0) -> 21
PCI->APIC IRQ transform: (B2,I2,P0) -> 22
vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 16384k
vesafb: mode is 800x600x24, linelength=2400, pages=92
vesafb: protected mode interface info at c000:56ad
vesafb: scrolling: redraw
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
fb0: VESA VGA frame buffer device
Console: switching to colour frame buffer device 100x37
pty: 256 Unix98 ptys configured
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
ikconfig 0.6 with /proc/ikconfig
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver 2.1.4 [Flags: R/O].
udf: registering filesystem
PCI: Via IRQ fixup for 0000:02:02.0, from 5 to 6
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:0c' and the driver 'serial'
pnp: match found with the PnP device '00:10' and the driver 'serial'
Using anticipatory scheduling io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 18
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SV0844A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
pnp: the driver 'ide' has been registered
hda: max request size: 128KiB
hda: 16514064 sectors (8455 MB) w/220KiB Cache, CHS=16383/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Console: switching to colour frame buffer device 100x37
ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci-hcd: block sizes: ed 64 td 64
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci-hcd 0000:00:1f.2: irq 19, io base 0000b000
uhci-hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
uhci-hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci-hcd 0000:00:1f.4: irq 23, io base 0000b800
uhci-hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:0: USB hub found
hub 2-0:0: 2 ports detected
uhci-hcd 0000:02:02.0: UHCI Host Controller
uhci-hcd 0000:02:02.0: irq 22, io base 0000a400
uhci-hcd 0000:02:02.0: new USB bus registered, assigned bus number 3
hub 3-0:0: USB hub found
hub 3-0:0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver usbscanner
drivers/usb/image/scanner.c: 0.4.14:USB Scanner Driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
Advanced Linux Sound Architecture Driver Version 0.9.6 (Wed Aug 20 20:27:13 2003 UTC).
PCI: Setting latency timer of device 0000:00:1f.5 to 64
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
intel8x0: clocking to 48000
ALSA device list:
#0: Intel 82801BA-ICH2 at 0xbc00, irq 17
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
IPv4 over IPv4 tunneling driver
NET: Registered protocol family 1
NET: Registered protocol family 17
hub 1-1:0: USB hub found
hub 1-1:0: 4 ports detected
found reiserfs format "3.6" with standard journal
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
hub 1-0:0: new USB device on port 2, assigned address 3
Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
input: USB HID v1.10 Mouse [Microsoft Microsoft Wireless Intellimouse Explorer® 1.0A] on usb-0000:00:1f.2-2
reiserfs: replayed 7 transactions in 1 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 344k freed
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1
Removing [202126 446322 0x0 SD]..done
Removing [202126 445700 0x0 SD]..done
Removing [202126 433135 0x0 SD]..done
Removing [268949 433122 0x0 SD]..done
Removing [268949 433118 0x0 SD]..done
Removing [268949 433090 0x0 SD]..done
Removing [268949 432673 0x0 SD]..done
Removing [268949 431117 0x0 SD]..done
Removing [202126 400489 0x0 SD]..done
Removing [202126 378674 0x0 SD]..done
Removing [202126 378038 0x0 SD]..done
Removing [202126 337588 0x0 SD]..done
Removing [202126 315719 0x0 SD]..done
Removing [202126 283327 0x0 SD]..done
Removing [202126 269118 0x0 SD]..done
Removing [202126 261131 0x0 SD]..done
Removing [202126 205921 0x0 SD]..done
There were 17 uncompleted unlinks/truncates. Completed
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[fglrx] module loaded - fglrx 3.2.5 [Aug 6 2003] on minor 0
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:0f' and the driver 'parport_pc'
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: ASUS Model: CD-S500/A Rev: 1.2C
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 50x/50x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-32123S Rev: XS0Z
Type: CD-ROM ANSI SCSI revision: 02
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xe1970000, 00:40:f4:5d:d7:92, IRQ 21
eth0: Identified 8139 chip type 'RTL-8139C'
i2c /dev entries driver module version 2.7.0 (20021208)
i2c-i801 version 2.7.0 (20021208)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
# Righe addate da me qua sopra da questo MTRR error può essere?
# il problema si presenta se apro + di 4 finestre, le sposto, o mi muovo in continuazione
# da una all'altra ( il 3D va bene a parte FPS bassini)
[fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps)
[fglrx] free AGP = 54800384
[fglrx] max AGP = 54800384
[fglrx] free LFB = 126177280
[fglrx] max LFB = 126177280
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 16384
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
[<c011f5e0>] __might_sleep+0x5f/0x72
[<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
[<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
[<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
[<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
[<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
[<c016c826>] sys_ioctl+0x124/0x2d2
[<c010b18f>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
[<c011f5e0>] __might_sleep+0x5f/0x72
[<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
[<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
[<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
[<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
[<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
[<c016c826>] sys_ioctl+0x124/0x2d2
[<c010b18f>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
[<c011f5e0>] __might_sleep+0x5f/0x72
[<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
[<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
[<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
[<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
[<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
[<c016c826>] sys_ioctl+0x124/0x2d2
[<c010b18f>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
[<c011f5e0>] __might_sleep+0x5f/0x72
[<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
[<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
[<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
[<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
[<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
[<c016c826>] sys_ioctl+0x124/0x2d2
[<c010b18f>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
[<c011f5e0>] __might_sleep+0x5f/0x72
[<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
[<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
[<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
[<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
[<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
[<c016c826>] sys_ioctl+0x124/0x2d2
[<c010b18f>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Call Trace:
[<c011f5e0>] __might_sleep+0x5f/0x72
[<e198ab2b>] __ke_down_struct_sem+0x2a/0x40 [fglrx]
[<e19983c3>] drm_find_file+0x23/0x70 [fglrx]
[<e19986ef>] drm_getmagic+0xff/0x160 [fglrx]
[<e19985f0>] drm_getmagic+0x0/0x160 [fglrx]
[<e198cb36>] firegl_ioctl+0x146/0x1b0 [fglrx]
[<c016c826>] sys_ioctl+0x124/0x2d2
[<c010b18f>] syscall_call+0x7/0xb
|
Può essere quello? e questa pappinata di roba col DEBUG è normale?
P.S. xchè nn riesco + ad aprire nuovi Topic? :'( [/code]
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Mon Sep 29, 2003 7:02 pm Post subject: |
|
|
Assolutamente non e' normale.
Controlla nel bios magari se e' tutto apposto, altrimenti dicci che versione del kernel usi.
CMQ: un sistema cosi' instabile, io controllerei le CFLAGS, un eventuale overclock e le memorie.
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Mon Sep 29, 2003 9:11 pm Post subject: |
|
|
Il bios è ok, mai dato problemi
Kernel 2.6 develop test 5
Xfree 4.3
Ati drivers 3.2.5 da CVS
Alcuni dei debug forse sono xchè mi son dimenticato...o meglio nn ho messo le ACPI nella compilazione del kernel (volevo saperne di + sul loro funzionamento)
e questo è il mio make.conf
| Code: |
USE="aalib directfb fbcon gpm svga xv opengl radeon -sis -rage128 -matrox -3dfx -gamma X
gtk gnome kde alsa mmx sse xml xmms jpeg gif avi cdr jack java mpeg mysql mozilla pdflib png samba quicktime scanner ssl x86 usb cups"
ALSA_CARDS="intel8x0"
CHOST="i686-pc-linux-gnu"
# PENTIUM4 will generate invalid SSE2 instructions; use 'pentium3' instead. #
# K6 markings are deceptive. Avoid setting -march for them. See Bug #24379. #
# ************************************************************************* #
#
# Decent examples:
#
#CFLAGS="-mcpu=athlon-xp -O3 -pipe"
#CFLAGS="-march=pentium3 -O3 -pipe"
# If you set a CFLAGS above, then this line will set your default C++ flags to
# the same settings.
#CXXFLAGS="${CFLAGS}"
CFLAGS nn l'ho abilitato durante tutta la compilazione (kenel, kde, ecc..)
|
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30996
Location: here
|
| Posted: Mon Sep 29, 2003 10:46 pm Post subject: |
|
|
Scusa la domanda ma perche' non hai abilitato le CFLAGS????
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Tue Sep 30, 2003 7:00 am Post subject: |
|
|
Per carita', lascia perdere l'ACPI.
Che vuoi dire con: "Il bios è ok, mai dato problemi"?
Io dicevo di controllare i settaggi di agp/pnp/mtrr.
Per quanto riguarda il kernel, usa una versione 2.4.
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Tue Sep 30, 2003 2:10 pm Post subject: |
|
|
| fedeliallalinea wrote: | | Scusa la domanda ma perche' non hai abilitato le CFLAGS???? |
bhe..è la prima volta che compilo una distro e la guida nn ne parlava, diceva solo della Flag USE quindi ho detto x evitare casini lassa perdere che forse sta volta ce la fo!
| cerri wrote: | Per carita', lascia perdere l'ACPI.
Che vuoi dire con: "Il bios è ok, mai dato problemi"?
Io dicevo di controllare i settaggi di agp/pnp/mtrr. |
Era proprio quello che intendevo col non ha dato problemi, i settaggi son tutti ok, xchè dovrei lasciare perdere l'ACPI? se non lo attivo non mi si spegne automaticamente il pc :'(
Cmq adesso ricompilo un vanilla e vedo...una cosa 2° voi è meglio che metta i driver ati + vecchi o posso lasciare questi (3.2.5)?
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
alexbr
Apprentice
Joined: 06 Sep 2003
Posts: 221
Location: Treviso - Italy
|
| Posted: Tue Sep 30, 2003 6:50 pm Post subject: |
|
|
Che window manager usi? certe volte ci sono alcuni che vanno in crash facilmente!
Parla un novizio, che ha avuto problemi a compilare alcuni window borders di kde.
_________________
Lizzie Borden with an axe
gave her father forty wakes
when she saw what she had done
she gave her mother forty one |
|
| Back to top |
|
|
JohnT.Clark
Tux's lil' helper
Joined: 09 Sep 2003
Posts: 95
Location: Italy
|
| Posted: Tue Sep 30, 2003 7:35 pm Post subject: |
|
|
| alexbr wrote: | Che window manager usi? certe volte ci sono alcuni che vanno in crash facilmente!
Parla un novizio, che ha avuto problemi a compilare alcuni window borders di kde. |
Proprio KDE 
_________________
" Visto che ormai il paradiso me lo scordo, tanto meglio che mi faccia un attico all'inferno "
YoShi ® |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
