| View previous topic :: View next topic |
| Author |
Message |
Gladdle
Guru
Joined: 27 Jul 2008
Posts: 313
Location: Cleebronn, Germany
|
 Posted: Wed Mar 14, 2012 5:49 pm Post subject: [solved] eth0 kaputt |
 |
|
Hallo an alle, nach dem letzten emerge --update --deep --newuse --keep-going @world geht meine Netzwerkkarte nicht mehr. Ich habe es schon unter drei verschiedenen kerneln getestet (ich habe in GRUB noch 5), unter keiner funktioniert es. Hier diverse infos:
lspci | grep net | Code: | | 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) |
dmesg | grep net | Code: | bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet driver bnx2x 1.70.30-0 (2011/10/25)
tg3 0000:02:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet (WireSpeed[1], EEE[0]) |
/etc/init.d/net.eth0 restart | Code: | ...
* ERROR: interface eth0 does not exist
* Ensure that you have loaded the correct kernel module for your hardware
* ERROR: net.eth0 failed to start |
/etc/udev/rules.d/70-persistent-net.rules | Code: | # This file was automatically generated by the /lib64/udev/write_net_rules
# program run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.
# PCI device 0x14e4:0x1639 (tg3)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="**:**:**:**:**:**", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x8086:0x4229 (iwlagn)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="**:**:**:**:**:**", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
# PCI device 0x14e4:0x1639 (tg3)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="**:**:**:**:**:**", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" |
ifconfig -a | Code: | eth0: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether **:**:**:**:**:** txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 50 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 5
lo: flags=8<LOOPBACK> mtu 16436
loop txqueuelen 0 (Lokale Schleife)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=128<NOARP> mtu 1480...... |
Irgend eine Idee? Ein Ansatz?
Last edited by Gladdle on Thu Mar 15, 2012 8:33 pm; edited 3 times in total |
|
| Back to top |
|
 |
yuhu
Tux's lil' helper
Joined: 17 Oct 2006
Posts: 86
|
| Posted: Wed Mar 14, 2012 6:17 pm Post subject: |
|
|
Hallo,
wird bei ifconfig -a oder ip addr was aufgelistet?
Hat sich mit dem update was bei udev verändert?
Kannst ja zur Vorsicht mal die udev Regeln in /etc/udev/rules.d/70-persistent-net.rules kommentieren und neu booten.
cu |
|
| Back to top |
|
|
Gladdle
Guru
Joined: 27 Jul 2008
Posts: 313
Location: Cleebronn, Germany
|
| Posted: Wed Mar 14, 2012 9:51 pm Post subject: |
|
|
In der /etc/udev/rules.d/70-persistent-net.rules waren wirklich diese Daten drin, ich habe sie auskommentiert, neu gebootet und immer noch derselbe Fehler. Habe alle informationen im ersten Beitrag aktualisiert und ergaenzt.
EDIT: Die Mac Adresse habe ich zensiert, war zu faul zum abtippen. |
|
| Back to top |
|
|
yuhu
Tux's lil' helper
Joined: 17 Oct 2006
Posts: 86
|
| Posted: Thu Mar 15, 2012 6:52 am Post subject: |
|
|
| poste bitte noch die Ausgaben von lspci -k bzw. lspci -k -n |
|
| Back to top |
|
|
Gladdle
Guru
Joined: 27 Jul 2008
Posts: 313
Location: Cleebronn, Germany
|
| Posted: Thu Mar 15, 2012 4:08 pm Post subject: |
|
|
lspci -k | Code: | 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
Kernel driver in use: pcieport
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: ata_piix
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0129
01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0129
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: tg3
08:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation PRO/Wireless 4965 AG or AGN
Kernel modules: iwl4965
0a:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Acer Incorporated [ALI] Device 0129
0a:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
Subsystem: Acer Incorporated [ALI] Device 0129
0a:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: tifm_7xx1
0a:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
Subsystem: Acer Incorporated [ALI] Device 0129
Kernel driver in use: sdhci-pci |
|
|
| Back to top |
|
|
yuhu
Tux's lil' helper
Joined: 17 Oct 2006
Posts: 86
|
| Posted: Thu Mar 15, 2012 5:09 pm Post subject: |
|
|
ich will die pci ids sehen lspci -s 02:00.0 -n
hast du die notwendige firmware installiert? |
|
| Back to top |
|
|
Gladdle
Guru
Joined: 27 Jul 2008
Posts: 313
Location: Cleebronn, Germany
|
| Posted: Thu Mar 15, 2012 5:13 pm Post subject: |
|
|
lspci -s 02:00.0 -n | Code: | | 02:00.0 0200: 14e4:1693 (rev 02) |
|
|
| Back to top |
|
|
yuhu
Tux's lil' helper
Joined: 17 Oct 2006
Posts: 86
|
| Posted: Thu Mar 15, 2012 5:19 pm Post subject: |
|
|
| Quote: | lkddb firmware : CONFIG_TIGON3 : firmware/tigon/tg3.bin
lkddb firmware : CONFIG_TIGON3 : firmware/tigon/tg3_tso.bin
lkddb firmware : CONFIG_TIGON3 : firmware/tigon/tg3_tso5.bin |
hast du diese files ?
http://cateee.net/lkddb/web-lkddb/TIGON3.html |
|
| Back to top |
|
|
Gladdle
Guru
Joined: 27 Jul 2008
Posts: 313
Location: Cleebronn, Germany
|
| Posted: Thu Mar 15, 2012 5:29 pm Post subject: |
|
|
Sind alle da: | Code: | /usr/src/linux-3.2.9-gentoo/firmware/tigon/tg3.bin
/usr/src/linux-3.2.9-gentoo/firmware/tigon/tg3_tso5.bin
/usr/src/linux-3.2.9-gentoo/firmware/tigon/tg3_tso.bin
... |
|
|
| Back to top |
|
|
yuhu
Tux's lil' helper
Joined: 17 Oct 2006
Posts: 86
|
| Posted: Thu Mar 15, 2012 5:37 pm Post subject: |
|
|
und installiert auch?
also unter /lib/firmware/.... |
|
| Back to top |
|
|
Gladdle
Guru
Joined: 27 Jul 2008
Posts: 313
Location: Cleebronn, Germany
|
| Posted: Thu Mar 15, 2012 6:30 pm Post subject: |
|
|
Das Problem machte das Packet "sys-apps/net-tools-1.60_p20120127084908", nach dem downgrade geht alles wieder. Vielen dank fuer die Hilfe 
Quelle: http://eulenspiegel.name/blog/index.php?blogId=1 |
|
| Back to top |
|
|
|
Deutsches Forum (German)
