What did you use before?

mind33 · n00b Joined: 07 May 2012 Posts: 15 Location: Norway

I have a question for all gentoo users here, What was you using before gentoo, and how long have you used gentoo?

I used linux mint , arch and slackware.

massimo · Veteran Joined: 22 Jun 2003 Posts: 1226

Before Gentoo I tried Suse, Redhat and Mandrake. I use it since I've joined this forum.
_________________
Hello 911? How are you?

depontius · Advocate Joined: 05 May 2004 Posts: 3522

The first Linux I installed was RedHat 4.0, from a friend at work. I played with it a bit, then bought RedHat 4.1 from Cheapbytes, then got on the 0./.1/.2 treadmill for several years. When RedHat 8 came out, with no ".0" after, I sensed trouble ahead, didn't migrate to it, and began shopping for a new distribution.

At first I started thinking about silly things like "ease of maintenance" and such, wandering through Mandrake, Debian, etc, etc. Then I came to my senses and realized that this was supposed to be a hobby, and supposed to be fun. So I started again, looking for the geekiest distribution I could find, that still had a happy level of convenience.

I've been with Gentoo ever since. Oddly enough, it also gets a very good "ease of maintenance" score from me. Every now and then there's a rough patch, like expat or some of the gcc or X11 upgrades, but compared to a full "version upgrade" from other distributions, it's still not bad.
_________________
.sigs waste space and bandwidth

Apheus · Guru Joined: 12 Jul 2008 Posts: 422

I had a look at SuSE and RedHat like ten years ago but couldn't really use them because there were no drivers for my router (not distro specific - noone ever wrote linux drivers for that ISDN thing).

The first distribution I actually used (after the switch to DSL) was Mandrake 9.1. I used Mandrake/Mandriva for two or three years, I guess.

Switched to Fedora Core 4. I don't know exactly why, maybe Mandriva's software selection was not so big.

Every six months, I updated Fedora via yum, this upgrade method is actually unsupported. It went well four or five times, but then it broke so hard that I didn't know where to start troubleshooting: KDE 4 was included too early, login needed two tries (maybe consolekit problem, but I didn't know back then), desktop visibly slow,...

I went looking for a rolling release distro and found gentoo. Apart from rolling release, I also like the stability (not that bleeding edge like Fedora, but not as old software as debian), and the assistance for merging config file changes with dispatch-conf. In Fedora, I manually version-controlled a copy of /etc via SVN!

I tried Kubuntu once, but it had a habit of nuking itself by auto-update, after six months not using it.

John R. Graham · Posted: Mon May 14, 2012 2:06 pm Post subject:

I was a Linux virgin when I started with Gentoo; Gentoo was my first love. I've since used RHEL and Centos in the course of work, but I remain true to my first. :wink:

- John
_________________
I can confirm that I have received between 0 and 499 National Security Letters.

nomilieu · n00b Joined: 22 Nov 2011 Posts: 24

I had used SuSE a time or two, probably in 2004 or so, but I had not been bitten by the free software bug yet. I wiped it and reinstalled XP.
I started using Gentoo in 2005, and used it for a year or two, but I switched to Ubuntu at some point.
Somewhere are 2008 or possibly 2009, I started using Arch Linux instead of Ubuntu.
For the past couple of years I've also had a Gentoo box, but I still use Arch at the same time.

(Obviously, my memory is vague with regard to durations.)

Ant P. · Watchman Joined: 18 Apr 2009 Posts: 6920

Windows XP, played with Slackware for a while. Then one day XPSP2 came along and bricked the OS and I decided I'd had enough.

NeddySeagoon · Posted: Mon May 14, 2012 7:10 pm Post subject:

Red Hat from version 6.1 to 8. When Red Hat 9 came out I switched to Gentoo.
That was 10 years ago.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.

Woofie · Posted: Mon May 14, 2012 7:47 pm Post subject:

Start with several Win version and than friend show me Ubuntu in 2007 and than I try suse, fedora and arch. I was come accross with gentoo several times. I try to install it into VB but with no luck. Than I decide it to install on my notebook and join this forum.
_________________
Sorry for my English. It's not my native language and I'm still learning it.

claudecat · n00b Joined: 26 Mar 2012 Posts: 28 Location: Md, Usa

First linux I tried was Red Hat (4.2?), but I remained a Windows user until Mint 6. Since then I've used virtually every distro you can imagine. Became an Arch enthusiast around 2 years ago (still like it a lot), only recently (4-5 months ago) settling on Gentoo for daily use.
_________________
Don't crush that dwarf, hand me the pliers...

xaviermiller · Posted: Mon May 14, 2012 8:31 pm Post subject:

SuSE in 1997, then LinuxFromScratch round 2000, then Gentoo in 2004
_________________
Kind regards,
Xavier Miller

Kollin · Posted: Mon May 14, 2012 10:05 pm Post subject:

Before Gentoo I used winxp. I have started using Gentoo in December 2005 and never looked back.Gentoo is my first and only Linux love.Other distros are just annoying (compared to Gentoo), especially Debilian and it's offspring (*buntu) :wink:

_________________
"Dear Enemy: may the Lord hate you and all your kind, may you be turned orange in hue, and may your head fall off at an awkward moment."
"Linux is like a wigwam - no windows, no gates, apache inside..."

jathlon · Posted: Tue May 15, 2012 2:50 am Post subject:

Started out with Red Hat in '97. Tried a few of the other distros that were around at the time. Ended up using Slackware for a lot of years before moving over to Gentoo in 2006. (Whoa. Time flies when you're having fun) I have looked at a couple of other distros in the intervening years, but have pretty much stuck with Gentoo.

j

saellaven · l33t Joined: 23 Jul 2006 Posts: 654

started out with Slackware back somewhere in 1993 or 1994 as something just to play with. Used OS/2 predominantly until I started college, where it was nice to have a *nix dev box at home. Started taking Linux more seriously in 1996 when I bought a copy of Red Hat Linux off of Cheap bytes, bought the full boxed retail version of RHL 5.0 in 1997 as a way of supporting them and basically abandoned OS/2. By 1999, I realized that I was thrashing my RH installs with a combination of Rawhide RPMs as well as my own compiled software and that Red Hat just wasn't keeping up as fast as I'd like. Rather than continue with my mess, I created my own LFS-type system that I maintained until 2006, which, even with the likes of comfigure, was a bear to maintain and keep track of updates on, especially across different architectures.

Gentoo basically automated what I was doing before and with portage, if something isn't cutting edge enough for me (a bit ironic since I'm mostly stable), I'm free to hack my own ebuilds and have things maintained without much headache.
_________________
Ryzen 3700X, Asus Prime X570-Pro, 64 GB DDR4 3200, GeForce GTX 1660 Super
openrc-0.17, ~vanilla-sources, ~nvidia-drivers, ~gcc

kamilsok · n00b Joined: 02 Mar 2010 Posts: 57 Location: Gdynia

Started with Fedora Core 4 back 2003 I think. Was mainly playing around since then (OpenSuSE, Ubuntu, Debian) but always kept going back to Win (variety of reasons).

Finally, something around 2009 I think, started using Linux as my main OS, although still couldn't choose the proper distro:) Went through (again) OpenSuSE, Fedora, Ubuntu, Debian and probably a couple more which I can't remember.

Another milestone was about 2 years ago.. I've changed my job and started working (no just playing) with Linux on a daily basis and was really impressed with it's internals. Back then I was using CentOS (@work and @home), but my inner curiosity kept my diving deeper and deeper.. from then the path was short. Arch (half a year to get familiar with DIY distro + rolling release idea), and then, last autumn, Gentoo..

And.. what's left to say.. I'm still compiling:)
_________________
"If you are using Linux as a development platform, do not skip first learning administration and security. It is a foolish programmer indeed who is not master of his or her own computer"

djdunn · l33t Joined: 26 Dec 2004 Posts: 812

I used some sort of BSD directly before i started using gentoo, that was back in 2002-2003 gentoo every day ever since
_________________
“Music is a moral law. It gives a soul to the Universe, wings to the mind, flight to the imagination, a charm to sadness, gaiety and life to everything. It is the essence of order, and leads to all that is good and just and beautiful.”

― Plato

disi · Posted: Tue May 15, 2012 10:52 am Post subject:

BASIC->DOS->OS/2->Suse->RedHat->Slackware->Gentoo->SomeOtherLinux->Gentoo->SomeOtherLinux->Gentoo->SomeOtherLinux->Gentoo->SomeOtherLinux->
Gentoo->SomeOtherLinux->Gentoo->SomeOtherLinux... :roll:

_________________
Gentoo on Uptime Project - Larry is a cow

John R. Graham · Posted: Tue May 15, 2012 11:06 am Post subject:

Trog Dog · Apprentice Joined: 04 Aug 2007 Posts: 282

geez if you really want to go back - in high school we used to use a BASIC terminal that was connected via an accoustic coupler (you took the handpiece of a rotary dial telephone dialed the number of the "mainframe" (I guess) and then placed it into rubber cups so it could operate) - that was the 80's

For linux started off with damn small linux then tried a heap of other distros - finally settling on gentoo because it was recommended as a good 64bit platform for running boinc - haven't looked back since and wouldn't use anything else - for me gentoo is real linux
_________________
CIC1=CC=C(C2=N[C@@H](CC(OC(C)(C)C)=O)C3=NN=C(C)N3C4=C2C(C)=C(C)S4)C=C1

depontius · Advocate Joined: 05 May 2004 Posts: 3522

John R. Graham · Posted: Tue May 15, 2012 12:29 pm Post subject:

Trog Dog · Apprentice Joined: 04 Aug 2007 Posts: 282

My post about what I used in the 80s which was my first experience with computers was in answer to the OP - sorry may have lost something in the translation

_________________
CIC1=CC=C(C2=N[C@@H](CC(OC(C)(C)C)=O)C3=NN=C(C)N3C4=C2C(C)=C(C)S4)C=C1

Hypnos · Posted: Tue May 15, 2012 4:33 pm Post subject:

AmigaOS (1988)
OS/2 (1992)
Red Hat (1996)
Gentoo (2002 till now)

This is at home. Along the way I used BASIC, NeXTSTEP, OpenVMS and various commercial Unixes.
_________________
Personal overlay | Simple backup scheme

netfab · Posted: Tue May 15, 2012 11:56 pm Post subject:

Windows XP
Mandrake, two weeks, without internet
need to patch the kernel to get an ISDN modem to work
cannot do it easily on mandrake, searching for another distro
trying Aurox Linux, 3 days, patched kernel successful
got my internet access, but everything else on the desktop is broken
searching for another distro that explains how things work

Found gentoo. This was in February 2005.

Jaglover · Posted: Wed May 16, 2012 12:14 am Post subject:

RH-5.1, first steps, steep learning curve, not very happy until discovering there's more of Linux.
Debian all the way. Many years of fun, still a big fan of Debian. Hats off to Debian devs.
FreeBSD. Which is not Linux, but it's great in many ways. Can be installed as Gentoo, BTW. You install the base, set up the make.conf, rebuild the world, start installing apps. You'll get the feeling of good old UNIX.
Gentoo since 2004. IMHO there is nothing as Gentoo for an up-to-date desktop system. Don't get me wrong, Gentoo is also very viable option as a server platform.

_________________
My Gentoo installation notes.
Please learn how to denote units correctly!