| View previous topic :: View next topic |
| Author |
Message |
kbs
n00b
Joined: 14 May 2007
Posts: 7
|
 Posted: Sat May 26, 2012 11:00 pm Post subject: [SOLVED]Nvidia card not showing thermal info while X running |
 |
|
- Sorry for my english
EDIT: Solved using old nvidia-drivers
Hello, i'm banging my head against the wall for a couple of weeks now.
A couple of weeks ago my Nvidia 8800 GS superclocked was working well on my gentoo box, now after some time (and upgrades) I can't get my thermal info from it. That's causing that the vga fan is working at full speed the whole time, making my computer very noisy.
If I kill X, I can run nvclock -F auto -f to set the fan to a normal speed, but it segfaults when I'm running X
| Code: | kbs@home ~ $ nvclock -s
Segmentation fault
|
| Code: | kbs@home ~ $ strace nvclock -s
execve("/usr/bin/nvclock", ["nvclock", "-s"], [/* 45 vars */]) = 0
brk(0) = 0x6e3000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fc97593d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=170717, ...}) = 0
mmap(NULL, 170717, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fc975913000
close(3) = 0
open("/lib64/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300#\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1617104, ...}) = 0
mmap(NULL, 3726344, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fc975390000
mprotect(0x7fc975514000, 2097152, PROT_NONE) = 0
mmap(0x7fc975714000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x184000) = 0x7fc975714000
mmap(0x7fc975719000, 19464, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fc975719000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fc975912000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fc975911000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fc975910000
arch_prctl(ARCH_SET_FS, 0x7fc975911700) = 0
mprotect(0x7fc975714000, 16384, PROT_READ) = 0
mprotect(0x61d000, 4096, PROT_READ) = 0
mprotect(0x7fc97593e000, 4096, PROT_READ) = 0
munmap(0x7fc975913000, 170717) = 0
brk(0) = 0x6e3000
brk(0x704000) = 0x704000
open("/proc/modules", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fc97593c000
read(3, "nvidia 12278825 30 - Live 0xffff"..., 1024) = 292
close(3) = 0
munmap(0x7fc97593c000, 4096) = 0
open("/proc/bus/pci/devices", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fc97593c000
read(3, "0000\t80862e20\t0\t 0"..., 1024) = 1024
read(3, " 0\tuhci_hcd\n00d2\t8086"..., 1024) = 1024
read(3, " 0\t 0\t "..., 1024) = 1024
read(3, " 0\t 0\t "..., 1024) = 1024
read(3, " 0\t 0\t "..., 1024) = 1024
open("/proc/bus/pci/01/00.0", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=4096, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fc97593b000
lseek(4, 0, SEEK_SET) = 0
read(4, "\336\20\6\6\7\0\20\0\242", 9) = 9
read(4, "\0\0\3\0\0\0\0\0\0\0\375\f\0\0\340\0\0\0\0\4\0\0\372\0\0\0\0\1\334\0\0\0"..., 1024) = 55
close(4) = 0
munmap(0x7fc97593b000, 4096) = 0
open("/proc/modules", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fc97593b000
read(4, "nvidia 12278825 30 - Live 0xffff"..., 1024) = 292
close(4) = 0
munmap(0x7fc97593b000, 4096) = 0
read(3, "\t 8000\t "..., 1024) = 121
read(3, "", 1024) = 0
close(3) = 0
munmap(0x7fc97593c000, 4096) = 0
stat("/home/kbs/.nvclock", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
open("/home/kbs/.nvclock/config", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=193, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fc97593c000
read(3, "#This is NVClock's config file. "..., 4096) = 193
read(3, "", 4096) = 0
close(3) = 0
munmap(0x7fc97593c000, 4096) = 0
open("/dev/nvidia0", O_RDWR) = 3
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xfd101000) = 0x7fc97593c000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xfd100000) = 0x7fc97593b000
mmap(NULL, 196607, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xfd000000) = -1 EINVAL (Invalid argument)
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xfd601000) = 0x7fc9758de000
mmap(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xfd610000) = 0x7fc9758ce000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xfd680000) = 0x7fc9758cc000
mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xfd700000) = -1 EINVAL (Invalid argument)
mmap(NULL, 65535, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xfd300000) = 0x7fc9757bc000
mmap(NULL, 256, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xfd088000) = 0x7fc9757bb000
close(3) = 0
stat("/home/kbs/.nvclock/bios0.rom", {st_mode=S_IFREG|0644, st_size=65535, ...}) = 0
--- {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x16ff} (Segmentation fault) ---
+++ killed by SIGSEGV +++
Violación de segmento
|
| Code: | kbs@home ~ $ nvidia-smi
Sat May 26 19:56:52 2012
+------------------------------------------------------+
| NVIDIA-SMI 3.295.53 Driver Version: 295.53 |
|-------------------------------+----------------------+----------------------+
| Nb. Name | Bus Id Disp. | Volatile ECC SB / DB |
| Fan Temp Power Usage /Cap | Memory Usage | GPU Util. Compute M. |
|===============================+======================+======================|
| 0. GeForce 8800 GS | 0000:01:00.0 N/A | N/A N/A |
| 0% N/A N/A N/A / N/A | 17% 66MB / 383MB | N/A Default |
|-------------------------------+----------------------+----------------------|
| Compute processes: GPU Memory |
| GPU PID Process name Usage |
|=============================================================================|
| 0. Not Supported |
+-----------------------------------------------------------------------------+ |
My /etc/X11/xorg.conf
| Code: | kbs@home ~ $ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 295.20 (root@home) vie may 4 01:16:07 ART 2012
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 295.49 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Tue May 1 00:54:24 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ G700"
HorizSync 31.0 - 83.0
VertRefresh 55.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GS"
EndSection
Section "Module"
Load "glx"
Disable "dri"
Disable "dri2"
EndSection
Section "Screen"
# Removed Option "metamodes" "DFP: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+166"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: nvidia-auto-select +1920+166, DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
|
| Code: | kbs@home ~ $ eix -e nvidia-drivers
[I] x11-drivers/nvidia-drivers
Available versions: 96.43.20!s 173.14.31!s (~)173.14.34!s 295.40!s 295.49!s (~)295.53!s {acpi custom-cflags gtk kernel_FreeBSD kernel_linux multilib (+)tools}
Installed versions: 295.53!s(17:49:27 26/05/12)(acpi kernel_linux multilib tools -kernel_FreeBSD)
Homepage: http://www.nvidia.com/
Description: NVIDIA X11 driver and GLX libraries |
| Code: | kbs@home ~ $ eix -e xorg-server
[I] x11-base/xorg-server
Available versions: 1.9.5-r1 1.10.4-r1 ~1.10.6 ~1.11.2-r1 1.11.2-r2 ~1.11.3 ~1.11.4 ~1.11.4-r1 ~1.12.0 ~1.12.0-r1 ~1.12.1 ~1.12.1.902 {dmx doc ipv6 kdrive minimal nptl selinux static-libs tslib +udev xnest xorg xvfb}
Installed versions: 1.11.2-r2(20:30:53 09/05/12)(nptl udev xorg -dmx -doc -ipv6 -kdrive -minimal -static-libs -tslib -xnest -xvfb)
Homepage: http://xorg.freedesktop.org/
Description: X.Org X servers |
| Code: | kbs@home ~ $ uname -r
3.2.12-gentoo |
Do you need any more info?
Thanks
Last edited by kbs on Sun May 27, 2012 11:45 pm; edited 1 time in total |
|
| Back to top |
|
 |
audiodef
Watchman
Joined: 06 Jul 2005
Posts: 6656
Location: The soundosphere
|
| Posted: Sun May 27, 2012 3:41 pm Post subject: |
|
|
Have you tried re-running nvidia-settings? Did you recompile your video drivers (if xorg-updates, you need to do this)?
You can try rolling back the various parts that could be affected: xorg-server and nvidia-drivers, in various combinations.
You might want to start logging your updates so you can look through logs when things break. This is what I do, once a month:
* emerge --sync
* (if you have layman) layman -S
* cd ~/PortageLogs (create if !exists)
* emerge -pvuDN world (check output)
* emerge -pvuDN world > (year)(month)
* less (year)(month) to make sure it matches. If Portage runs into Blocks, it won't dump. You'll have to resolve these first
* emerge -vuDN world
If anything breaks, I less my most recent (year)(month) file, figure out what was upgraded, and roll it back. Sometimes I put the offending package version in package.mask.
_________________
decibel Linux: https://decibellinux.org
Github: https://github.com/Gentoo-Music-and-Audio-Technology
Facebook: https://www.facebook.com/decibellinux
Discord: https://discord.gg/73XV24dNPN |
|
| Back to top |
|
|
kbs
n00b
Joined: 14 May 2007
Posts: 7
|
| Posted: Sun May 27, 2012 3:44 pm Post subject: |
|
|
Yes, i've tried running nvidia-settings and recompiling drivers, xorg-server, kernel and various combinations, I will try using old versions of the drivers and kernel and I will let you know.
Thanks |
|
| Back to top |
|
|
kbs
n00b
Joined: 14 May 2007
Posts: 7
|
| Posted: Sun May 27, 2012 11:44 pm Post subject: |
|
|
SOLVED
Using old nvidia-drivers now it's working well:
| Code: | kbs@home ~ $ eix -Ss nvidia-drivers
[I] x11-drivers/nvidia-drivers
Available versions: 96.43.20!s 173.14.31!s [m]~173.14.34!s [m]295.40!s [m]295.49!s [m]~295.53!s {acpi custom-cflags gtk kernel_FreeBSD kernel_linux multilib (+)tools}
Installed versions: 173.14.31!s(20:09:11 27/05/12)(acpi gtk kernel_linux multilib -custom-cflags)
Homepage: http://www.nvidia.com/
Description: NVIDIA X11 driver and GLX libraries |
| Code: | kbs@home ~ $ eix -e xorg-server
[I] x11-base/xorg-server
Available versions: 1.9.5-r1 1.10.4-r1 ~1.10.6 ~1.11.2-r1 1.11.2-r2 ~1.11.3 ~1.11.4 ~1.11.4-r1 ~1.12.0 ~1.12.0-r1 ~1.12.1 ~1.12.1.902 {dmx doc ipv6 kdrive minimal nptl selinux static-libs tslib +udev xnest xorg xvfb}
Installed versions: 1.10.4-r1(20:02:53 27/05/12)(nptl udev xorg -dmx -doc -ipv6 -kdrive -minimal -static-libs -tslib -xnest -xvfb)
Homepage: http://xorg.freedesktop.org/
Description: X.Org X servers |
I had to mask the new versions:
| Code: | kbs@home ~ $ cat /etc/portage/package.mask
>x11-drivers/nvidia-drivers-173.14.31
>x11-base/xorg-server-1.10.4-r1 |
Thanks |
|
| Back to top |
|
|
audiodef
Watchman
Joined: 06 Jul 2005
Posts: 6656
Location: The soundosphere
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
