errore nell'installazione dallo stage 1 [RISOLTO]

[demone]

Volevo postare l'errore che ho in fase d'installazione(quando do il comando scripts/bootstrap.sh) ma non riesco a montare il floppy,mi da il seguente errore bash: mount : command not found
ciao e buona giornata

[hellraiser]

si perke nello stage 1 mi pare non vi sia presento il mount...

se vuoi montare il floppy, fallo prima di dare il "chroot /mnt/gentoo /bin/bash"
_________________
Io non sono nessuno...ma nessuno è come me!

"Open Source is a good idea..."

[demone]

Come posso fare per postarvi il mio make.conf e l'errore del scripts/bootstrap.sh?

[bubble27]

A me si monta il floppy con
# mount /dev/fd0 /mnt/qui_scegli_una_dir_ (io la montai provvisoriamente in cdrom)

cmq x demone hai editato /etc/make.conf ????

ciao Gentooaglia

[hellraiser]

lui intende dire che il comando di mount non gli funge dopo aver scompatto il tar.bz dello stage1...

infatti li non c è il mount...


_________________
Io non sono nessuno...ma nessuno è come me!

"Open Source is a good idea..."

[bubble27]

[demone]

sto facendo l'installazione e settato il modello del processore nel make.conf

[bubble27]

[demone]

questo lo fatto in fase d'installazione,come dice la guida di gentoo,cmq lo avevo fatto gia prima!non e che lo sto facendo ora!se riusci a postare l'errore e il make.conf potreste capire meglio

[bsolar]

[bubble27]

[neon]

[demone]

Forse mi spiego male io!!!!
seguo la guida all'installazione di gentoo passo passo ok
fino al boostrap,li ricevo un errore ,siccome vorrei postarlo insieme al make.conf,ho provato a montare il floppy per copiarci su il make.conf e l'errore,ma mi dice mount :command not foud,come posso fare per postarvi questi due file!tutto chiaro ora!

[fedeliallalinea]

[bubble27]

[demone]

Finalmente vi posto il make.conf e l'output delle errore del bootstrap

Make .conf

# Copyright 2000-2002 Daniel Robbins, Gentoo Technologies, Inc.
# Contains local system settings for Portage system
# Please review 'man make.conf' for more information.

# Build-time functionality
# ========================
#
# The USE variable is used to enable optional build-time functionality. For
# example, quite a few packages have optional X, gtk or GNOME functionality
# that can only be enabled or disabled at compile-time. Gentoo Linux has a
# very extensive set of USE variables described in our USE variable HOWTO at
# http://www.gentoo.org/doc/use-howto.html
#
# The available list of use flags with descriptions is in your portage tree.
# Use 'less' to view them: --> less /usr/portage/profiles/use.desc <--
#
# Example:
#USE="X gtk gnome -alsa"

# Host Setting
# ============
#
# If you are using a Pentium Pro or greater processor, leave this line as-is;
# otherwise, change to i586, i486 or i386 as appropriate. All modern systems
# (even Athlons) should use "i686-pc-linux-gnu"
#
CHOST="i686-pc-linux-gnu"

# Host and optimization settings
# ==============================
#
# For optimal performance, enable a CFLAGS setting appropriate for your CPU
#
# -mcpu=<cpu-type> means optimize code for the particular type of CPU without
# breaking compatibility with other CPUs.
#
# -march=<cpu-type> means to take full advantage of the ABI and instructions
# for the particular CPU; this will break compatibility with older CPUs (for
# example, -march=athlon-xp code will not run on a regular Athlon, and
-march=i686 code will not run on a Pentium Classic.
#
# CPU types supported in gcc-3.2 and higher: athlon-xp, athlon-mp, athlon-4,
# athlon-tbird, athlon, k6, k6-2, k6-3, i386, i486, i586 (Pentium), i686
# (PentiumPro), pentium, pentium-mmx, pentiumpro, pentium2 (Celeron), pentium3,
# and pentium4. Note that Gentoo Linux 1.4 and higher include at least gcc-3.2.
#
# CPU types supported in gcc-2.95*: k6, i386, i486, i586 (Pentium), i686
# (Pentium Pro), pentium, pentiumpro Gentoo Linux 1.2 and below use gcc-2.95*
#
# Decent examples:
#
#CFLAGS="-mcpu=athlon-xp -O3 -pipe"
#CFLAGS="-O3 -mcpu=i686 -funroll-loops -pipe"

# If you set a CFLAGS above, then this line will set your default C++ flags to
# the same settings. If you don't set CFLAGS above, then comment this line out.
CXXFLAGS="${CFLAGS}"

# Advanced Masking
# ================
#
# Gentoo is using a new masking system to allow for easier stability testing
# on packages. KEYWORDS are used in ebuilds to mask and unmask packages based
# on the platform they are set for. A special form has been added that
# indicates packages and revisions that are expected to work, but have not yet
# been approved for the stable set. '~arch' is a superset of 'arch' which
# includes the unstable, in testing, packages. Users of the 'x86' architecture
# would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages.
# '~ppc', '~sparc', '~sparc64' are the unstable KEYWORDS for their respective
# platforms. DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST.
# IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS.
#
#ACCEPT_KEYWORDS="~arch"

# Portage Directories
# ===================
#
# Each of these settings controls an aspect of portage's storage and file
# system usage. If you change any of these, be sure it is available when
# you try to use portage. *** DO NOT INCLUDE A TRAILING "/" ***
#
# PORTAGE_TMPDIR is the location portage will use for compilations and
# temporary storage of data. This can get VERY large depending upon
# the application being installed.
#PORTAGE_TMPDIR=/var/tmp
#
# PORTDIR is the location of the portage tree. This is the repository
# for all profile information as well as all ebuilds. This directory
# itself can reach 200M. WE DO NOT RECOMMEND that you change this.
#PORTDIR=/usr/portage
#
# DISTDIR is where all of the source code tarballs will be placed for
# emerges. The source code is maintained here unless you delete
# it. The entire repository of tarballs for gentoo is 9G. This is
# considerably more than any user will ever download. 2-3G is
# a large DISTDIR.
#DISTDIR=${PORTDIR}/distfiles
#
# PKGDIR is the location of binary packages that you can have created
# with '--buildpkg' or '-b' while emerging a package. This can get
# upto several hundred megs, or even a few gigs.
#PKGDIR=${PORTDIR}/packages
#
# PORTDIR_OVERLAY is a directory where local ebuilds may be stored without
# concern that they will be deleted by rsync updates. Default is not
# defined.
#PORTDIR_OVERLAY=/usr/local/portage

# Fetching files
# ==============
#
# If you need to set a proxy for wget or lukemftp, add the appropriate "export
# ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if
# all users on your system should use them.
#
# Portage uses wget by default. Here are some settings for some alternate
# downloaders -- note that you need to merge these programs first before they
# will be available.
#
# Lukemftp (BSD ftp):
#FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}"
#RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}"
#
# Prozilla (turbo downloader)
#FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}'

# Advanced Features
# =================
#
# MAKEOPTS provides extra options that may be passed to 'make' when a
# program is compiled. Presently the only use is for specifying
# the number of parallel makes (-j) to perform. The suggested number
# for parallel makes is CPUs+1.
#MAKEOPTS="-j2"
#
# AUTOCLEAN enables portage to automatically clean out older or overlapping
# packages from the system after every successful merge. This is the
# same as running 'emerge -c' after every merge. Set with: "yes" or "no".
#AUTOCLEAN="yes"
#
# FEATURES are settings that affect the functionality of portage. Most of
# these settings are for developer use, but some are available to non-
# developers as well. 'buildpkg' is an always-on setting for the emerge
# flag of the same name. It causes binary packages to be created of all
# packages that are merged.
#FEATURES="sandbox ccache buildpkg"
#
# RSYNC_RETRIES sets the number of times portage will attempt to retrieve
# a current portage tree before it exits with an error. This allows
# for a more successful retrieval without user intervention most times.
#RSYNC_RETRIES="3"

output errore


Gentoo Linux; http://www.gentoo.org/
Copyright 2001-2003 Gentoo Technologies, Inc.; Distributed under the GPL
Starting Bootstrap of base system ...

Using >=sys-apps/baselayout-1.7.9-r1
Using >=sys-apps/portage-2.0.25
Using >=sys-devel/binutils-2.13.90.0.4
Using >=sys-devel/gcc-3.2
Using
Using >=sys-libs/glibc-2.2.5
Using >=sys-apps/texinfo-4.2-r1
Using sys-libs/zlib
Using >=sys-libs/ncurses-5.2.20020112a

Configuring environment...
exporting PROXY=!!! Invalid token (not "=") will
!!! Parse error in /etc/make.conf.
!!! Incorrect multiline literals can cause this. Do not use them.
exporting HTTP_PROXY=!!! Invalid token (not "=") will
!!! Parse error in /etc/make.conf.
!!! Incorrect multiline literals can cause this. Do not use them.
exporting FTP_PROXY=!!! Invalid token (not "=") will
!!! Parse error in /etc/make.conf.
!!! Incorrect multiline literals can cause this. Do not use them.
!!! Invalid token (not "=") will
!!! Parse error in /etc/make.conf.
!!! Incorrect multiline literals can cause this. Do not use them.

[demone]

Io sto dietro ad un Smootwall puoi essere questo il problema!?

[demone]

Finalmente vi posto il make.conf e l'output delle errore del bootstrap

Make .conf

# Copyright 2000-2002 Daniel Robbins, Gentoo Technologies, Inc.
# Contains local system settings for Portage system
# Please review 'man make.conf' for more information.

# Build-time functionality
# ========================
#
# The USE variable is used to enable optional build-time functionality. For
# example, quite a few packages have optional X, gtk or GNOME functionality
# that can only be enabled or disabled at compile-time. Gentoo Linux has a
# very extensive set of USE variables described in our USE variable HOWTO at
# http://www.gentoo.org/doc/use-howto.html
#
# The available list of use flags with descriptions is in your portage tree.
# Use 'less' to view them: --> less /usr/portage/profiles/use.desc <--
#
# Example:
#USE="X gtk gnome -alsa"

# Host Setting
# ============
#
# If you are using a Pentium Pro or greater processor, leave this line as-is;
# otherwise, change to i586, i486 or i386 as appropriate. All modern systems
# (even Athlons) should use "i686-pc-linux-gnu"
#
CHOST="i686-pc-linux-gnu"

# Host and optimization settings
# ==============================
#
# For optimal performance, enable a CFLAGS setting appropriate for your CPU
#
# -mcpu=<cpu-type> means optimize code for the particular type of CPU without
# breaking compatibility with other CPUs.
#
# -march=<cpu-type> means to take full advantage of the ABI and instructions
# for the particular CPU; this will break compatibility with older CPUs (for
# example, -march=athlon-xp code will not run on a regular Athlon, and
-march=i686 code will not run on a Pentium Classic.
#
# CPU types supported in gcc-3.2 and higher: athlon-xp, athlon-mp, athlon-4,
# athlon-tbird, athlon, k6, k6-2, k6-3, i386, i486, i586 (Pentium), i686
# (PentiumPro), pentium, pentium-mmx, pentiumpro, pentium2 (Celeron), pentium3,
# and pentium4. Note that Gentoo Linux 1.4 and higher include at least gcc-3.2.
#
# CPU types supported in gcc-2.95*: k6, i386, i486, i586 (Pentium), i686
# (Pentium Pro), pentium, pentiumpro Gentoo Linux 1.2 and below use gcc-2.95*
#
# Decent examples:
#
#CFLAGS="-mcpu=athlon-xp -O3 -pipe"
#CFLAGS="-O3 -mcpu=i686 -funroll-loops -pipe"

# If you set a CFLAGS above, then this line will set your default C++ flags to
# the same settings. If you don't set CFLAGS above, then comment this line out.
CXXFLAGS="${CFLAGS}"

# Advanced Masking
# ================
#
# Gentoo is using a new masking system to allow for easier stability testing
# on packages. KEYWORDS are used in ebuilds to mask and unmask packages based
# on the platform they are set for. A special form has been added that
# indicates packages and revisions that are expected to work, but have not yet
# been approved for the stable set. '~arch' is a superset of 'arch' which
# includes the unstable, in testing, packages. Users of the 'x86' architecture
# would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages.
# '~ppc', '~sparc', '~sparc64' are the unstable KEYWORDS for their respective
# platforms. DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST.
# IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS.
#
#ACCEPT_KEYWORDS="~arch"

# Portage Directories
# ===================
#
# Each of these settings controls an aspect of portage's storage and file
# system usage. If you change any of these, be sure it is available when
# you try to use portage. *** DO NOT INCLUDE A TRAILING "/" ***
#
# PORTAGE_TMPDIR is the location portage will use for compilations and
# temporary storage of data. This can get VERY large depending upon
# the application being installed.
#PORTAGE_TMPDIR=/var/tmp
#
# PORTDIR is the location of the portage tree. This is the repository
# for all profile information as well as all ebuilds. This directory
# itself can reach 200M. WE DO NOT RECOMMEND that you change this.
#PORTDIR=/usr/portage
#
# DISTDIR is where all of the source code tarballs will be placed for
# emerges. The source code is maintained here unless you delete
# it. The entire repository of tarballs for gentoo is 9G. This is
# considerably more than any user will ever download. 2-3G is
# a large DISTDIR.
#DISTDIR=${PORTDIR}/distfiles
#
# PKGDIR is the location of binary packages that you can have created
# with '--buildpkg' or '-b' while emerging a package. This can get
# upto several hundred megs, or even a few gigs.
#PKGDIR=${PORTDIR}/packages
#
# PORTDIR_OVERLAY is a directory where local ebuilds may be stored without
# concern that they will be deleted by rsync updates. Default is not
# defined.
#PORTDIR_OVERLAY=/usr/local/portage

# Fetching files
# ==============
#
# If you need to set a proxy for wget or lukemftp, add the appropriate "export
# ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if
# all users on your system should use them.
#
# Portage uses wget by default. Here are some settings for some alternate
# downloaders -- note that you need to merge these programs first before they
# will be available.
#
# Lukemftp (BSD ftp):
#FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}"
#RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}"
#
# Prozilla (turbo downloader)
#FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}'

# Advanced Features
# =================
#
# MAKEOPTS provides extra options that may be passed to 'make' when a
# program is compiled. Presently the only use is for specifying
# the number of parallel makes (-j) to perform. The suggested number
# for parallel makes is CPUs+1.
#MAKEOPTS="-j2"
#
# AUTOCLEAN enables portage to automatically clean out older or overlapping
# packages from the system after every successful merge. This is the
# same as running 'emerge -c' after every merge. Set with: "yes" or "no".
#AUTOCLEAN="yes"
#
# FEATURES are settings that affect the functionality of portage. Most of
# these settings are for developer use, but some are available to non-
# developers as well. 'buildpkg' is an always-on setting for the emerge
# flag of the same name. It causes binary packages to be created of all
# packages that are merged.
#FEATURES="sandbox ccache buildpkg"
#
# RSYNC_RETRIES sets the number of times portage will attempt to retrieve
# a current portage tree before it exits with an error. This allows
# for a more successful retrieval without user intervention most times.
#RSYNC_RETRIES="3"

output errore


Gentoo Linux; http://www.gentoo.org/
Copyright 2001-2003 Gentoo Technologies, Inc.; Distributed under the GPL
Starting Bootstrap of base system ...

Using >=sys-apps/baselayout-1.7.9-r1
Using >=sys-apps/portage-2.0.25
Using >=sys-devel/binutils-2.13.90.0.4
Using >=sys-devel/gcc-3.2
Using
Using >=sys-libs/glibc-2.2.5
Using >=sys-apps/texinfo-4.2-r1
Using sys-libs/zlib
Using >=sys-libs/ncurses-5.2.20020112a

Configuring environment...
exporting PROXY=!!! Invalid token (not "=") will
!!! Parse error in /etc/make.conf.
!!! Incorrect multiline literals can cause this. Do not use them.
exporting HTTP_PROXY=!!! Invalid token (not "=") will
!!! Parse error in /etc/make.conf.
!!! Incorrect multiline literals can cause this. Do not use them.
exporting FTP_PROXY=!!! Invalid token (not "=") will
!!! Parse error in /etc/make.conf.
!!! Incorrect multiline literals can cause this. Do not use them.
!!! Invalid token (not "=") will
!!! Parse error in /etc/make.conf.
!!! Incorrect multiline literals can cause this. Do not use them.

[hellraiser]

[bubble27]

#CFLAGS="-mcpu=athlon-xp -O3 -pipe"
#CFLAGS="-O3 -mcpu=i686 -funroll-loops -pipe"

questa ancora nn l'hai settata ???? decommenta in base alla cpu che hai !!!

cmq x l'errore potrebbe essere anche essere quello che dici tu, controlla i vari firewall !!

[shev]

[hellraiser]

infatti dovrebbe esserci anke la parte del proxy...dato ke l'errore riguarda proprio quello...posta bene /etc/make.conf


_________________
Io non sono nessuno...ma nessuno è come me!

"Open Source is a good idea..."

[demone]

In base ha cio ke mi avete suggerito a configurato il make.conf ma il problema persiste!
# Copyright 2000-2002 Daniel Robbins, Gentoo Technologies, Inc.
# Contains local system settings for Portage system
# Please review 'man make.conf' for more information.

# Build-time functionality
# ========================
#
# The USE variable is used to enable optional build-time functionality. For
# example, quite a few packages have optional X, gtk or GNOME functionality
# that can only be enabled or disabled at compile-time. Gentoo Linux has a
# very extensive set of USE variables described in our USE variable HOWTO at
# http://www.gentoo.org/doc/use-howto.html
#
# The available list of use flags with descriptions is in your portage tree.
# Use 'less' to view them: --> less /usr/portage/profiles/use.desc <--
#
# Example:
#USE="X gtk gnome -alsa"

# Host Setting
# ============
#
# If you are using a Pentium Pro or greater processor, leave this line as-is;
# otherwise, change to i586, i486 or i386 as appropriate. All modern systems
# (even Athlons) should use "i686-pc-linux-gnu"
CHOST="i686-pc-linux-gnu"

# Host and optimization settings
# ==============================
#
# For optimal performance, enable a CFLAGS setting appropriate for your CPU
#
# -mcpu=<cpu-type> means optimize code for the particular type of CPU without
# breaking compatibility with other CPUs.
#
# -march=<cpu-type> means to take full advantage of the ABI and instructions
# for the particular CPU; this will break compatibility with older CPUs (for
# example, -march=athlon-xp code will not run on a regular Athlon, and
-march=i686 code will not run on a Pentium Classic.
# CPU types supported in gcc-3.2 and higher: athlon-xp, athlon-mp, athlon-4,
# athlon-tbird, athlon, k6, k6-2, k6-3, i386, i486, i586 (Pentium), i686
# (PentiumPro), pentium, pentium-mmx, pentiumpro, pentium2 (Celeron), pentium3,
# and pentium4. Note that Gentoo Linux 1.4 and higher include at least gcc-3.2.
#
# CPU types supported in gcc-2.95*: k6, i386, i486, i586 (Pentium), i686
# (Pentium Pro), pentium, pentiumpro Gentoo Linux 1.2 and below use gcc-2.95*
#
# Decent examples:
#
CFLAGS="-mcpu=i686 -O3 -pipe"
CFLAGS="-O3 -mcpu=i686 -funroll-loops -pipe"

# If you set a CFLAGS above, then this line will set your default C++ flags to
# the same settings. If you don't set CFLAGS above, then comment this line out.
CXXFLAGS="${CFLAGS}"

# Advanced Masking
# ================
#
# Gentoo is using a new masking system to allow for easier stability testing
# on packages. KEYWORDS are used in ebuilds to mask and unmask packages based
# on the platform they are set for. A special form has been added that
# indicates packages and revisions that are expected to work, but have not yet
# been approved for the stable set. '~arch' is a superset of 'arch' which
# includes the unstable, in testing, packages. Users of the 'x86' architecture
# would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages.
# '~ppc', '~sparc', '~sparc64' are the unstable KEYWORDS for their respective
# platforms. DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST.
# IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS.
#
#ACCEPT_KEYWORDS="~arch"

# Portage Directories
# ===================
#
# Each of these settings controls an aspect of portage's storage and file
# system usage. If you change any of these, be sure it is available when
# you try to use portage. *** DO NOT INCLUDE A TRAILING "/" ***
#
# PORTAGE_TMPDIR is the location portage will use for compilations and
# temporary storage of data. This can get VERY large depending upon
# the application being installed.
#PORTAGE_TMPDIR=/var/tmp
#
# PORTDIR is the location of the portage tree. This is the repository
# for all profile information as well as all ebuilds. This directory
# itself can reach 200M. WE DO NOT RECOMMEND that you change this.
#PORTDIR=/usr/portage
#
# DISTDIR is where all of the source code tarballs will be placed for
# emerges. The source code is maintained here unless you delete
# it. The entire repository of tarballs for gentoo is 9G. This is
# considerably more than any user will ever download. 2-3G is
# a large DISTDIR.
#DISTDIR=${PORTDIR}/distfiles
#
# PKGDIR is the location of binary packages that you can have created
# with '--buildpkg' or '-b' while emerging a package. This can get
# upto several hundred megs, or even a few gigs.
#PKGDIR=${PORTDIR}/packages
#
# PORTDIR_OVERLAY is a directory where local ebuilds may be stored without
# concern that they will be deleted by rsync updates. Default is not
# defined.
#PORTDIR_OVERLAY=/usr/local/portage

# Fetching files
# ==============
#
# If you need to set a proxy for wget or lukemftp, add the appropriate "export
# ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if
# all users on your system should use them.
#
# Portage uses wget by default. Here are some settings for some alternate
# downloaders -- note that you need to merge these programs first before they
# will be available.
#
# Lukemftp (BSD ftp):
#FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}"
#RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}"
#
# Prozilla (turbo downloader)
#FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}'

# Advanced Features
# =================
#
# MAKEOPTS provides extra options that may be passed to 'make' when a
# program is compiled. Presently the only use is for specifying
# the number of parallel makes (-j) to perform. The suggested number
# for parallel makes is CPUs+1.
#MAKEOPTS="-j2"
#
# AUTOCLEAN enables portage to automatically clean out older or overlapping
# packages from the system after every successful merge. This is the
# same as running 'emerge -c' after every merge. Set with: "yes" or "no".
#AUTOCLEAN="yes"
#
# FEATURES are settings that affect the functionality of portage. Most of
# these settings are for developer use, but some are available to non-
# developers as well. 'buildpkg' is an always-on setting for the emerge
# flag of the same name. It causes binary packages to be created of all
# packages that are merged.
#FEATURES="sandbox ccache buildpkg"
#
# RSYNC_RETRIES sets the number of times portage will attempt to retrieve
# a current portage tree before it exits with an error. This allows
# for a more successful retrieval without user intervention most times.
#RSYNC_RETRIES="3"

Il firewall e settato di dafault e non ho fatto smanettamenti sulle variabili,cqm io la mia debian riesco ad aggiornala tranquillamente

[neon]

CFLAGS ne basta uno... e dovrebbe essere ottimizzato in base al tuo processore, nella guida dovrebbe spiegarlo...

per editare il make.conf cosa usi?

[demone]

Si faccio cosi # nano -w /etc/make.conf per editare il file ho setta una sola CFLAGS ora ma ho lo stesso problema