| View previous topic :: View next topic |
| Author |
Message |
Fuuzetsu
n00b
Joined: 20 Jul 2012
Posts: 14
Location: Bath, UK
|
 Posted: Tue Sep 04, 2012 1:58 pm Post subject: [Solved] USB devices keep disconnecting and reconnecting |
 |
|
I was doing a whole system update recently (not updating a kernel) and all my USB devices started going haywire at that point. dmesg was showing that they were being recognised and registered but they were unusable (so mouse pointer not moving for USB mouse, no keyboard input from USB keyboard, USB headphones not showing up and therefore not usable). Crossing my fingers and praying for the best, I rebooted the system.
Hurray, my devices worked. It's now about 3-5 days from the update. Yesterday I noticed that my mouse kept cutting off (laser going off momentarily and pointer stopping) as well as my USB keyboard doing the same at the very same time (further confirmed by my keyboard layout switcher on the top panel (GNOME 3) going off and back on)
With only my mouse and keyboard plugged in, pretty much all of my dmesg looks like this (snipped):
| Code: | usb 4-1: USB disconnect, device number 64
usb 4-1: new low-speed USB device number 65 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input85
generic-usb 0003:192F:0616.004D: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 65
usb 4-1: new low-speed USB device number 66 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input86
generic-usb 0003:192F:0616.004E: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 66
usb 4-1: new low-speed USB device number 67 using uhci_hcd
hub 4-0:1.0: unable to enumerate USB device on port 1
usb 4-1: new low-speed USB device number 68 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input87
generic-usb 0003:192F:0616.004F: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 68
usb 4-1: new low-speed USB device number 69 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input88
generic-usb 0003:192F:0616.0050: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 69
usb 4-1: new low-speed USB device number 70 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input89
generic-usb 0003:192F:0616.0051: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 70
usb 4-1: new low-speed USB device number 71 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input90
generic-usb 0003:192F:0616.0052: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 71
usb 4-1: new low-speed USB device number 72 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input91
generic-usb 0003:192F:0616.0053: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
|
The devices cut off for a fraction of a second. Adding the time it takes for the device to be initialized, it becomes about 1 second cut which is incredibly annoying. I'd imagine that audio would start going through main speakers (thanks to pulseaudio) as well if I was using USB headphones when it cut off.
I'm not sure what information to include here... I'm not even sure if this one is in the right section!
I'm using a ThinkPad x61s
| Code: | | Linux ShanaX61s 3.4.4-gentoo #2 SMP Fri Aug 10 22:43:35 BST 2012 i686 Intel(R) Core(TM)2 Duo CPU L7700 @ 1.80GHz GenuineIntel GNU/Linux |
| Code: |
[I] sys-fs/udev
Available versions: (~)141-r1 146-r1^t 149 151-r4 164-r2 171-r6 (~)188^t (~)189^t **9999^t {{acl action_modeswitch build debug (+)devfs-compat doc edd (-)extras floppy gudev hwdb introspection keymap old-hd-rules +openrc +rule_generator selinux static-libs test}}
Installed versions: 189^t(08:01:02 30/08/12)(acl gudev hwdb openrc -doc -introspection -keymap -selinux -static-libs)
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Description: Linux dynamic and persistent device naming support (aka userspace devfs)
|
Please feel free to request whatever information you may need and/or to move the topic to appropriate section if this isn't the one.
Last edited by Fuuzetsu on Fri Sep 07, 2012 6:42 pm; edited 1 time in total |
|
| Back to top |
|
 |
roravun
Tux's lil' helper
Joined: 05 Sep 2012
Posts: 82
|
| Posted: Wed Sep 05, 2012 4:15 pm Post subject: |
|
|
You can provide full dmesg, lspci and lsmod. Also if you configure the kernel by hand, .config would be nice.
Are these devices battery powered? I also have a wireless USB mouse, and when it is running low on power weird things happen, like random disconnections, not reacting to clicks. |
|
| Back to top |
|
|
Fuuzetsu
n00b
Joined: 20 Jul 2012
Posts: 14
Location: Bath, UK
|
| Posted: Thu Sep 06, 2012 1:22 pm Post subject: |
|
|
I have just come from work so at least dmesg won't be 127 milles long due to reboot (although it demonstrates the problem)
| Code: |
0:06: resource 1 [io 0x4400-0x44ff]
pci_bus 0000:06: resource 2 [mem 0xd8000000-0xdbffffff pref]
pci_bus 0000:06: resource 3 [mem 0xc0000000-0xc3ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.1: power state changed by ACPI to D0
pci 0000:00:1a.1: power state changed by ACPI to D0
pci 0000:00:1a.7: power state changed by ACPI to D0
pci 0000:00:1a.7: power state changed by ACPI to D0
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.7: power state changed by ACPI to D0
pci 0000:00:1d.7: power state changed by ACPI to D0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3460k freed
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1346932709.570:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 1710
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
start plist test
end plist test
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Generic RTC Driver v1.07
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
ioatdma: Intel(R) QuickData Technology Driver 4.00
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
[drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:02: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 21)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:05:00.2: setting latency timer to 64
sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
hdaps: inverting axis (3) readings
hdaps: LENOVO ThinkPad X61s detected
input: hdaps as /devices/platform/hdaps/input/input5
hdaps: driver successfully loaded
TCP: cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 496k freed
sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c10 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c18 irq 15
ata1.00: ATA-8: HITACHI HTS722010K9SA00, DC2ZC75A, max UDMA/133
ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72201 DC2Z PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
NCR53c406a: no available ports found
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
qlogicfas: Unknown symbol qlogicfas408_info (err 0)
qlogicfas: Unknown symbol qlogicfas408_biosparam (err 0)
qlogicfas: Unknown symbol qlogicfas408_setup (err 0)
qlogicfas: Unknown symbol qlogicfas408_detect (err 0)
qlogicfas: Unknown symbol qlogicfas408_ihandl (err 0)
qlogicfas: Unknown symbol qlogicfas408_bus_reset (err 0)
qlogicfas: Unknown symbol qlogicfas408_disable_ints (err 0)
qlogicfas: Unknown symbol qlogicfas408_get_chip_type (err 0)
qlogicfas: Unknown symbol qlogicfas408_abort (err 0)
qlogicfas: Unknown symbol qlogicfas408_queuecommand (err 0)
Failed initialization of WD-7000 SCSI card!
NCR53c406a: no available ports found
imm: Version 2.05 (for Linux 2.4.0)
sym53c416.c: Version 1.0.0-ac
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.2-0[28900]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.06.14-rc1 Fri. Jan. 6 17:00:00 PDT 2012
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.03-k.
Emulex LightPulse Fibre Channel SCSI driver 8.3.30
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf8426400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.4-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8426800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.4-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.4-gentoo uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.4.4-gentoo uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.4.4-gentoo uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.4.4-gentoo uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-1: new full-speed USB device number 2 using uhci_hcd
usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: BCM2045B
usb 3-1: Manufacturer: Broadcom Corp
usb 3-2: new full-speed USB device number 3 using uhci_hcd
usb 3-2: New USB device found, idVendor=0483, idProduct=2016
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Biometric Coprocessor
usb 3-2: Manufacturer: STMicroelectronics
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
md: raid10 personality registered for level 10
md: linear personality registered for level -1
md: multipath personality registered for level -4
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
fuse init (API version 7.18)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd-udevd[12603]: starting version 189
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (35 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Thermal Zone [THM1] (35 C)
ACPI: AC Adapter [AC] (on-line)
microcode: CPU0 sig=0x6fb, pf=0x80, revision=0xb6
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
microcode: CPU1 sig=0x6fb, pf=0x80, revision=0xb6
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
input: PC Speaker as /devices/platform/pcspkr/input/input7
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
yenta_cardbus 0000:05:00.0: CardBus bridge found [17aa:20c6]
tpm_tis 00:0a: 1.2 TPM (device-id 0x3203, rev-id 9)
ACPI: Requesting acpi_cpufreq
cfg80211: Calling CRDA to update world regulatory domain
yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:05:00.0: Socket status: 30000006
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x7fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x7fff: excluding 0x4000-0x40ff 0x4400-0x44ff
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd7efffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd7efffff: excluding 0xd7b10000-0xd7efffff
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdbffffff: excluding 0xd8000000-0xdbffffff
Non-volatile memory driver v1.3
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1d:72:98:84:f8
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008FF-0FF
tpm_tis 00:0a: A TPM error (6) occurred attempting to read a pcr value
tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7NETB6WW (2.16 ), EC 7MHT25WW-1.03
thinkpad_acpi: Lenovo ThinkPad X61s, model 7666B4G
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwl4965 0000:03:00.0: irq 44 for MSI/MSI-X
iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sda3): re-mounted. Opts: (null)
Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
tmpfs: No value for mount option '0'
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
usb 5-2: new low-speed USB device number 2 using uhci_hcd
usb 5-2: New USB device found, idVendor=1c4f, idProduct=000e
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: USB Keykoard
usb 5-2: Manufacturer: SIGMACH1P
input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input9
generic-usb 0003:1C4F:000E.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:1d.0-2/input0
generic-usb 0003:1C4F:000E.0002: usb_submit_urb(ctrl) failed: -1
generic-usb 0003:1C4F:000E.0002: timeout initializing reports
input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input10
generic-usb 0003:1C4F:000E.0002: input,hidraw1: USB HID v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:1d.0-2/input1
usb 4-1: new low-speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input11
generic-usb 0003:192F:0616.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
EXT4-fs (sda3): re-mounted. Opts: commit=0
EXT4-fs (sda1): re-mounted. Opts: commit=0
EXT4-fs (sda4): re-mounted. Opts: commit=0
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 4-1: USB disconnect, device number 2
usb 4-1: new low-speed USB device number 3 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input12
generic-usb 0003:192F:0616.0004: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 3
usb 4-1: new low-speed USB device number 4 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input13
generic-usb 0003:192F:0616.0005: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 4
usb 4-1: new low-speed USB device number 5 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input14
generic-usb 0003:192F:0616.0006: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 5
usb 4-1: new low-speed USB device number 6 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input15
generic-usb 0003:192F:0616.0007: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:16:b6:da:6b:30
wlan0: send auth to 00:16:b6:da:6b:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:16:b6:da:6b:30 (try 1/3)
wlan0: RX AssocResp from 00:16:b6:da:6b:30 (capab=0x411 status=0 aid=5)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 4-1: USB disconnect, device number 6
usb 4-1: new low-speed USB device number 7 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input16
generic-usb 0003:192F:0616.0008: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 7
usb 4-1: new low-speed USB device number 8 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input17
generic-usb 0003:192F:0616.0009: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 8
usb 4-1: new low-speed USB device number 9 using uhci_hcd
usb 4-1: device not accepting address 9, error -71
hub 4-0:1.0: unable to enumerate USB device on port 1
hub 1-0:1.0: unable to enumerate USB device on port 3
usb 4-1: new low-speed USB device number 11 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input18
generic-usb 0003:192F:0616.000A: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 11
usb 4-1: new low-speed USB device number 12 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input19
generic-usb 0003:192F:0616.000B: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 12
usb 4-1: new low-speed USB device number 13 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input20
generic-usb 0003:192F:0616.000C: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 13
usb 4-1: new low-speed USB device number 14 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input21
generic-usb 0003:192F:0616.000D: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 14
usb 4-1: new low-speed USB device number 15 using uhci_hcd
hub 4-0:1.0: unable to enumerate USB device on port 1
usb 4-1: new low-speed USB device number 16 using uhci_hcd
usb 4-1: device not accepting address 16, error -71
hub 4-0:1.0: unable to enumerate USB device on port 1
usb 4-1: new low-speed USB device number 18 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input22
generic-usb 0003:192F:0616.000E: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 18
usb 4-1: new low-speed USB device number 19 using uhci_hcd
hub 4-0:1.0: unable to enumerate USB device on port 1
usb 4-1: new low-speed USB device number 20 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input23
generic-usb 0003:192F:0616.000F: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 20
usb 4-1: new low-speed USB device number 21 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input24
generic-usb 0003:192F:0616.0010: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 21
usb 4-1: new low-speed USB device number 22 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input25
generic-usb 0003:192F:0616.0011: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 22
usb 4-1: new low-speed USB device number 23 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input26
generic-usb 0003:192F:0616.0012: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 23
usb 4-1: new low-speed USB device number 24 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input27
generic-usb 0003:192F:0616.0013: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 24
usb 4-1: new low-speed USB device number 25 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input28
generic-usb 0003:192F:0616.0014: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 25
usb 4-1: new low-speed USB device number 26 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input29
generic-usb 0003:192F:0616.0015: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
usb 4-1: USB disconnect, device number 26
usb 4-1: new low-speed USB device number 27 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input30
generic-usb 0003:192F:0616.0016: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
hub 1-0:1.0: unable to enumerate USB device on port 3
usb 4-1: USB disconnect, device number 27
usb 4-1: new low-speed USB device number 28 using uhci_hcd
usb 4-1: New USB device found, idVendor=192f, idProduct=0616
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input31
generic-usb 0003:192F:0616.0017: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
|
lspci
| Code: |
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M-E) LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
05:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
05:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
05:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
|
lsmod
| Code: |
Module Size Used by
ipv6 230423 15
snd_hda_codec_analog 60172 1
snd_hda_intel 19482 2
arc4 1046 2
iwl4965 79418 0
acpi_cpufreq 4909 1
mperf 951 1 acpi_cpufreq
snd_hda_codec 67293 2 snd_hda_intel,snd_hda_codec_analog
snd_pcm 54356 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5605 2 snd_pcm,snd_hda_intel
snd_timer 14630 1 snd_pcm
iwlegacy 39828 1 iwl4965
thinkpad_acpi 53143 0
freq_table 2007 1 acpi_cpufreq
mac80211 297567 2 iwl4965,iwlegacy
nvram 4533 1 thinkpad_acpi
cfg80211 140922 3 iwl4965,iwlegacy,mac80211
snd 42159 10 snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_hda_codec_analog
processor 23019 3 acpi_cpufreq
i2c_i801 6895 0
tpm_tis 6865 0
yenta_socket 18442 0
pcmcia_rsrc 8512 1 yenta_socket
tpm 11029 1 tpm_tis
e1000e 126065 0
joydev 7375 0
tpm_bios 4029 1 tpm
led_class 1982 2 iwlegacy,thinkpad_acpi
coretemp 4502 0
iTCO_wdt 10505 0
rfkill 11722 3 cfg80211,thinkpad_acpi
iTCO_vendor_support 1441 1 iTCO_wdt
pcspkr 1351 0
battery 8477 0
microcode 6097 0
ac 2369 0
thermal 6171 0
xts 2273 0
gf128mul 5622 1 xts
aes_generic 25630 1
cbc 1998 0
sha256_generic 11161 0
tg3 121447 0
libphy 13658 1 tg3
e1000 89448 0
fuse 57475 0
xfs 641645 0
exportfs 2867 1 xfs
nfs 214256 0
lockd 49636 1 nfs
auth_rpcgss 24753 1 nfs
nfs_acl 1859 1 nfs
sunrpc 145243 4 nfs,auth_rpcgss,lockd,nfs_acl
jfs 158641 0
multipath 5155 0
linear 3379 0
raid10 29853 0
dm_snapshot 25756 0
dm_crypt 13177 0
dm_mirror 11454 0
dm_region_hash 5728 1 dm_mirror
dm_log 7351 2 dm_region_hash,dm_mirror
dm_mod 57221 4 dm_log,dm_mirror,dm_crypt,dm_snapshot
scsi_wait_scan 483 0
hid_sunplus 1053 0
hid_sony 2212 0
hid_samsung 2538 0
hid_pl 949 0
hid_petalynx 1622 0
hid_monterey 1149 0
hid_microsoft 2355 0
hid_logitech 6505 0
hid_gyration 1992 0
hid_ezkey 1014 0
hid_cypress 1454 0
hid_chicony 1821 0
hid_cherry 1117 0
hid_belkin 1282 0
hid_apple 4222 0
hid_a4tech 1544 0
sl811_hcd 9003 0
usbhid 30662 0
ohci_hcd 20211 0
ssb 37757 1 ohci_hcd
uhci_hcd 19473 0
usb_storage 34627 0
ehci_hcd 35326 0
usbcore 113331 8 uhci_hcd,usb_storage,hid_sony,ohci_hcd,ehci_hcd,usbhid,sl811_hcd
usb_common 582 1 usbcore
aic94xx 63835 0
libsas 53015 1 aic94xx
lpfc 513189 0
qla2xxx 363196 0
megaraid_sas 64522 0
megaraid_mbox 24963 0
megaraid_mm 6314 1 megaraid_mbox
megaraid 37578 0
aacraid 69080 0
sx8 11525 0
DAC960 70348 0
cciss 91851 0
3w_9xxx 30093 0
3w_xxxx 22841 0
mptsas 47810 0
scsi_transport_sas 20634 3 libsas,mptsas,aic94xx
mptfc 11621 0
scsi_transport_fc 37553 3 lpfc,qla2xxx,mptfc
scsi_tgt 7928 1 scsi_transport_fc
mptspi 13601 0
mptscsih 25581 3 mptfc,mptsas,mptspi
mptbase 81797 4 mptfc,mptsas,mptspi,mptscsih
atp870u 25448 0
dc395x 28027 0
qla1280 19574 0
imm 8463 0
parport 24819 1 imm
dmx3191d 8701 0
sym53c8xx 63195 0
gdth 78575 0
advansys 55423 0
initio 15894 0
BusLogic 20444 0
arcmsr 25137 0
aic7xxx 106514 0
aic79xx 111876 0
scsi_transport_spi 17818 5 mptspi,sym53c8xx,aic79xx,aic7xxx,dmx3191d
sg 23209 0
pdc_adma 4641 0
sata_inic162x 6271 0
sata_mv 21804 0
ata_piix 18646 4
ahci 17745 0
libahci 16131 1 ahci
sata_qstor 4409 0
sata_vsc 3110 0
sata_uli 2233 0
sata_sis 3009 0
sata_sx4 7745 0
sata_nv 16828 0
sata_via 5744 0
sata_svw 3262 0
sata_sil24 9595 0
sata_sil 6064 0
sata_promise 8172 0
pata_pcmcia 6937 0
pcmcia 29934 2 ssb,pata_pcmcia
pcmcia_core 9754 3 pcmcia,pcmcia_rsrc,yenta_socket
|
The kernel was manually configured (with help of genkernel), I'm pasting .config in below. I didn't make any changes to it when updating my system.
EDIT:
.config was a bit too big so here it is: http://pastebin.com/EVPzBiWB
The devices are USB powered. I'd be suspecting a bad device/USB port if it wasn't all of them dying in the same instant. |
|
| Back to top |
|
|
roravun
Tux's lil' helper
Joined: 05 Sep 2012
Posts: 82
|
| Posted: Fri Sep 07, 2012 12:10 pm Post subject: |
|
|
| Quote: | | USB port if it wasn't all of them dying in the same instant. |
Or USB controller may be damaged, which would explain that none of the devices is working.
However, your kernel is obviously configured properly, hid module is in place, so I really do not see where the issue lies.
I think what you should do now is:
Try some other USB non-HID devices, for example usb flash mem, usb harddrive, whatever.
If they do not work too, it maybe hardware fault.(surprising coincidence though, that both mouse and keyboard fail at the same time)
Regardless of the test result, I recommend you install latest stable (that is gentoo unstable  ) kernel, and check if the issue persists.
If under the latest kernel things are bad too, try some kernel earlier than yours.
Finally you may also check out some well-known distro live cd, e.g. Fedora. If your devices does not work there too, I would lean towards hardware-fault explanation. |
|
| Back to top |
|
|
Fuuzetsu
n00b
Joined: 20 Jul 2012
Posts: 14
Location: Bath, UK
|
| Posted: Fri Sep 07, 2012 3:28 pm Post subject: |
|
|
The weird thing is that they were working before an update with emerge so unless that somehow broke my USB controller then it's probably not an issue with my laptop itself.
I am suspecting that the mouse might be dicking up. I'll try unplugging just that and see if the problem persists. |
|
| Back to top |
|
|
Fuuzetsu
n00b
Joined: 20 Jul 2012
Posts: 14
Location: Bath, UK
|
| Posted: Fri Sep 07, 2012 6:41 pm Post subject: |
|
|
| I have narrowed the issue to a hardware problem with the mouse & am marking the thread as solved. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
