| View previous topic :: View next topic |
| Author |
Message |
pgu
l33t
Joined: 30 Jul 2009
Posts: 722
Location: Oslo, Norway
|
 Posted: Tue Sep 11, 2012 8:33 pm Post subject: Mouse not working - sometimes |
 |
|
Sometimes my external USB mouse will not respond after a boot. Other times it does work after a boot. This is on a laptop with a touchpad.
It's always listed in lsusb:
| Code: | | Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver |
But when it failes during boot I get:
| Code: | usb 3-3: new full-speed USB device number 2 using xhci_hcd
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32 |
If I re-plug the mouse I get:
| Code: | usb 3-3: USB disconnect, device number 2
usb 3-3: new full-speed USB device number 3 using xhci_hcd
logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0006/input/input7
logitech-djdevice 0003:046D:C52B.0007: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-3:1 |
and the mouse will start working again.
But how do I make sure it will always work after a boot?
Could it be that I have too many drivers enabled (as the person with the keyboard problem)?
| Code: | grep -i usb /usr/src/linux/.config | grep ^CONF
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_USB_HID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_FTDI_SIO=y
grep CONFIG_HIDRAW /usr/src/linux/.config
CONFIG_HIDRAW=y |
|
|
| Back to top |
|
 |
BillWho
Veteran
Joined: 03 Mar 2012
Posts: 1600
Location: US
|
| Posted: Tue Sep 11, 2012 9:25 pm Post subject: |
|
|
pgu.
Under Special HID drivers
-*- Logitech devices │ │
│ │ <M> Logitech Unifying receivers full support │ │
│ │
_________________
Good luck 
Since installing gentoo, my life has become one long emerge  |
|
| Back to top |
|
|
pgu
l33t
Joined: 30 Jul 2009
Posts: 722
Location: Oslo, Norway
|
| Posted: Wed Sep 12, 2012 6:35 pm Post subject: |
|
|
Unfortunately it's already included:
| Code: | # grep LOGITECH .config
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
# CONFIG_LOGITECH_FF is not set
|
|
|
| Back to top |
|
|
BillWho
Veteran
Joined: 03 Mar 2012
Posts: 1600
Location: US
|
| Posted: Wed Sep 12, 2012 7:29 pm Post subject: |
|
|
pgu.
That intermittent experience is very odd. I have the same device on this laptop and another on a desktop and both work perfectly. Both are a mouse/keyboard combo.
| Code: | | [ 6.983030] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2 |
The only difference I can see is | Code: | | usb 2-1: new high-speed USB device number 2 using ehci_hcd |
where yours is | Code: | | usb 3-3: new full-speed USB device number 2 using xhci_hcd |
Here are the settings for the laptop :
| Code: | bill@laptop /usr/src/linux $ grep -i usb /usr/src/linux/.config | grep ^CONF
CONFIG_SND_USB=y
CONFIG_USB_HID=m
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_USB_LED=m |
You might want to pursue the usb 3-3 aspect.
_________________
Good luck
Since installing gentoo, my life has become one long emerge |
|
| Back to top |
|
|
friesia
Apprentice
Joined: 23 Mar 2007
Posts: 202
|
| Posted: Thu Nov 15, 2012 5:14 pm Post subject: |
|
|
I also get this -32 error sometimes.
If I activate the mouse (move it) before the kernel boots, there's no problem. |
|
| Back to top |
|
|
m0021
n00b
Joined: 08 Jan 2010
Posts: 55
Location: Sonneberg, Germany
|
| Posted: Fri Dec 07, 2012 3:01 pm Post subject: |
|
|
i also experienced that problem for half a year. i think this is a kernel bug. as far as i understand, the problem only appears if i plug the unifying reciever into a usb3 port. if i use a usb2 hub on the same usb3 port it works. unfortunately my laptop only has usb3 ports, so i need to use a usb2 hub for !one! device to get working. the other solution is to unload and load the hid_logitech_dj module until it recognizes the mouse correctly. here is a script i found in a ubuntu forum:
| Code: | #!/bin/bash
while :; do dmesg|grep logitech-djreceiver|tail -1|grep -q -c "failed with error -32" || exit;
echo -n `date`" Driver Reload" ;
rmmod hid_logitech_dj ;
modprobe hid_logitech_dj ;
dmesg|grep logitech-djreceiver|tail -1 ; sleep 1; done |
|
|
| Back to top |
|
|
pgu
l33t
Joined: 30 Jul 2009
Posts: 722
Location: Oslo, Norway
|
| Posted: Sun Jan 19, 2014 1:34 pm Post subject: |
|
|
I just install on a new PC
| Code: | Linux i3 3.10.25-gentoo #2 SMP Sun Jan 19 14:13:10 CET 2014 x86_64 Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz GenuineIntel GNU/Linux
|
But run into the same problem. But here I can't get the mouse to work at all:
| Code: | [ 243.805972] usb 2-1.7: USB disconnect, device number 5
[ 253.738561] usb 2-1.7: new full-speed USB device number 6 using ehci-pci
[ 253.842094] logitech-djreceiver 0003:046D:C52B.000C: hiddev0,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input2
[ 253.842252] logitech-djreceiver 0003:046D:C52B.000C: logi_dj_probe:hdev->ll_driver->open returned error:-16
[ 253.842573] logitech-djreceiver: probe of 0003:046D:C52B.000C failed with error -16
|
|
|
| Back to top |
|
|
MarcosAM
n00b
Joined: 07 Jun 2014
Posts: 3
|
|
| Back to top |
|
|
|
Kernel & Hardware
