| View previous topic :: View next topic |
| Author |
Message |
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
 Posted: Mon Sep 17, 2012 10:14 am Post subject: [SOLVED] problems with Xorg-server，fail to startx. |
 |
|
problems with Xorg-server，fail to startx. And I don't know whether it is the problem about drivers.
My video card is Amd 6470M.
Xorg.0.log says:
| Code: |
[ 3827.483]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 3827.483] X Protocol Version 11, Revision 0
[ 3827.483] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
[ 3827.483] Current Operating System: Linux localhost 3.4.9-gentoo #7 SMP Mon Sep 17 10:33:08 Local time zone must be set--see zic x86_64
[ 3827.483] Kernel command line: root=/dev/sda10
[ 3827.484] Build Date: 17 September 2012 04:42:16PM
[ 3827.484]
[ 3827.484] Current version of pixman: 0.26.0
[ 3827.484] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3827.484] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3827.485] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 17 16:53:03 2012
[ 3827.485] (==) Using config file: "/etc/X11/xorg.conf"
[ 3827.485] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3827.486] (==) ServerLayout "aticonfig Layout"
[ 3827.486] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 3827.486] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 3827.486] (**) | |-->Device "aticonfig-Device[0]-0"
[ 3827.486] (==) Automatically adding devices
[ 3827.486] (==) Automatically enabling devices
[ 3827.494] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 3827.494] Entry deleted from font path.
[ 3827.494] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 3827.494] Entry deleted from font path.
[ 3827.494] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3827.494] Entry deleted from font path.
[ 3827.494] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 3827.494] Entry deleted from font path.
[ 3827.494] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 3827.494] Entry deleted from font path.
[ 3827.494] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 3827.494] Entry deleted from font path.
[ 3827.494] (==) FontPath set to:
[ 3827.494] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 3827.494] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3827.494] (II) Loader magic: 0x7d5ac0
[ 3827.494] (II) Module ABI versions:
[ 3827.494] X.Org ANSI C Emulation: 0.4
[ 3827.494] X.Org Video Driver: 12.0
[ 3827.494] X.Org XInput driver : 16.0
[ 3827.494] X.Org Server Extension : 6.0
[ 3827.495] (--) PCI:*(0:0:1:0) 1002:9647:17aa:397b rev 0, Mem @ 0xd0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 3827.495] (--) PCI: (0:1:0:0) 1002:6760:17aa:397b rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 3827.495] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3827.495] (II) "extmod" will be loaded by default.
[ 3827.495] (II) "dbe" will be loaded by default.
[ 3827.495] (II) "glx" will be loaded by default.
[ 3827.495] (II) "record" will be loaded by default.
[ 3827.495] (II) "dri" will be loaded by default.
[ 3827.495] (II) "dri2" will be loaded by default.
[ 3827.495] (II) LoadModule: "extmod"
[ 3827.520] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 3827.520] (II) Module extmod: vendor="X.Org Foundation"
[ 3827.520] compiled for 1.12.2, module version = 1.0.0
[ 3827.520] Module class: X.Org Server Extension
[ 3827.520] ABI class: X.Org Server Extension, version 6.0
[ 3827.520] (II) Loading extension MIT-SCREEN-SAVER
[ 3827.520] (II) Loading extension XFree86-VidModeExtension
[ 3827.520] (II) Loading extension XFree86-DGA
[ 3827.520] (II) Loading extension DPMS
[ 3827.520] (II) Loading extension XVideo
[ 3827.520] (II) Loading extension XVideo-MotionCompensation
[ 3827.520] (II) Loading extension X-Resource
[ 3827.520] (II) LoadModule: "dbe"
[ 3827.520] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 3827.520] (II) Module dbe: vendor="X.Org Foundation"
[ 3827.520] compiled for 1.12.2, module version = 1.0.0
[ 3827.520] Module class: X.Org Server Extension
[ 3827.520] ABI class: X.Org Server Extension, version 6.0
[ 3827.520] (II) Loading extension DOUBLE-BUFFER
[ 3827.520] (II) LoadModule: "glx"
[ 3827.520] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 3827.520] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 3827.520] compiled for 6.9.0, module version = 1.0.0
[ 3827.521] (II) Loading extension GLX
[ 3827.521] (II) LoadModule: "record"
[ 3827.521] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 3827.521] (II) Module record: vendor="X.Org Foundation"
[ 3827.521] compiled for 1.12.2, module version = 1.13.0
[ 3827.521] Module class: X.Org Server Extension
[ 3827.521] ABI class: X.Org Server Extension, version 6.0
[ 3827.521] (II) Loading extension RECORD
[ 3827.521] (II) LoadModule: "dri"
[ 3827.521] (WW) Warning, couldn't open module dri
[ 3827.521] (II) UnloadModule: "dri"
[ 3827.521] (II) Unloading dri
[ 3827.521] (EE) Failed to load module "dri" (module does not exist, 0)
[ 3827.521] (II) LoadModule: "dri2"
[ 3827.521] (WW) Warning, couldn't open module dri2
[ 3827.521] (II) UnloadModule: "dri2"
[ 3827.521] (II) Unloading dri2
[ 3827.521] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 3827.521] (II) LoadModule: "fglrx"
[ 3827.521] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 3827.541] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 3827.541] compiled for 1.4.99.906, module version = 8.98.2
[ 3827.541] Module class: X.Org Video Driver
[ 3827.542] (II) Loading sub module "fglrxdrm"
[ 3827.542] (II) LoadModule: "fglrxdrm"
[ 3827.542] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 3827.542] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 3827.542] compiled for 1.4.99.906, module version = 8.98.2
[ 3827.542] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[ 3827.542] (II) AMD Proprietary Linux Driver Release Identifier: 8.98
[ 3827.542] (II) AMD Proprietary Linux Driver Build Date: Jun 11 2012 11:57:59
[ 3827.542] (--) using VT number 7
[ 3827.544] (WW) Falling back to old probe method for fglrx
[ 3827.551] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 3827.551] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found
[ 3827.551] (--) Chipset Supported AMD Graphics Processor (0x6760) found
[ 3827.552] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 3827.552] (**) ChipID override: 0x9647
[ 3827.552] (**) Chipset Supported AMD Graphics Processor (0x9647) found
[ 3827.554] ukiDynamicMajor: found major device number 250
[ 3827.554] ukiDynamicMajor: found major device number 250
[ 3827.554] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 3827.554] ukiOpenDevice: node name is /dev/ati/card0
[ 3827.554] ukiOpenDevice: open result is 7, (OK)
[ 3827.554] ukiOpenByBusid: ukiOpenMinor returns 7
[ 3827.554] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 3827.554] ukiOpenDevice: node name is /dev/ati/card1
[ 3827.554] ukiOpenDevice: open result is 7, (OK)
[ 3827.554] ukiOpenByBusid: ukiOpenMinor returns 7
[ 3827.554] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 3827.556] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 3827.556] (II) AMD Video driver is signed
[ 3827.557] (II) fglrx(0): pEnt->device->identifier=0x1e1e890
[ 3827.557] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 3827.558] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 3827.558] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 3827.558] (==) fglrx(0): Default visual is TrueColor
[ 3827.558] (**) fglrx(0): Option "DPMS" "true"
[ 3827.558] (==) fglrx(0): RGB weight 888
[ 3827.558] (II) fglrx(0): Using 8 bits per RGB
[ 3827.558] (==) fglrx(0): Buffer Tiling is ON
[ 3827.558] (II) Loading sub module "fglrxdrm"
[ 3827.558] (II) LoadModule: "fglrxdrm"
[ 3827.558] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 3827.558] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 3827.558] compiled for 1.4.99.906, module version = 8.98.2
[ 3827.560] ukiDynamicMajor: found major device number 250
[ 3827.560] ukiDynamicMajor: found major device number 250
[ 3827.560] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 3827.560] ukiOpenDevice: node name is /dev/ati/card0
[ 3827.560] ukiOpenDevice: open result is 11, (OK)
[ 3827.560] ukiOpenByBusid: ukiOpenMinor returns 11
[ 3827.560] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 3827.560] ukiOpenDevice: node name is /dev/ati/card1
[ 3827.560] ukiOpenDevice: open result is 11, (OK)
[ 3827.560] ukiOpenByBusid: ukiOpenMinor returns 11
[ 3827.560] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 3827.560] (**) fglrx(0): NoAccel = NO
[ 3827.561] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 3827.561] (--) fglrx(0): Chipset: "AMD Radeon HD 6400M Series" (Chipset = 0x6760)
[ 3827.561] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x397b)
[ 3827.561] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 3827.561] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 3827.561] (--) fglrx(0): MMIO registers at 0xf0200000
[ 3827.561] (--) fglrx(0): I/O port at 0x00002000
[ 3827.561] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 3827.563] (II) fglrx(0): ATIF platform detected
[ 3827.564] (II) fglrx(0): AC Adapter is used
[ 3829.740] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 3829.740] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 3829.740] (II) fglrx(0): PCIE card detected
[ 3829.740] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 3829.740] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 3829.741]
[ 3829.742] Backtrace:
[ 3829.742] 0: /usr/bin/X (xorg_backtrace+0x36) [0x56d6d6]
[ 3829.742] 1: /usr/bin/X (0x400000+0x171189) [0x571189]
[ 3829.742] 2: /lib64/libpthread.so.0 (0x7ff113a17000+0x10420) [0x7ff113a27420]
[ 3829.742] 3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs112_atiddxPreInit+0x11fb) [0x7ff1109db42b]
[ 3829.742] 4: /usr/bin/X (InitOutput+0x812) [0x476392]
[ 3829.742] 5: /usr/bin/X (0x400000+0x24b83) [0x424b83]
[ 3829.742] 6: /lib64/libc.so.6 (__libc_start_main+0xfd) [0x7ff11294b2ad]
[ 3829.742] 7: /usr/bin/X (0x400000+0x248e9) [0x4248e9]
[ 3829.742]
[ 3829.742] Segmentation fault at address (nil)
[ 3829.742]
Fatal server error:
[ 3829.742] Caught signal 11 (Segmentation fault). Server aborting
[ 3829.742]
[ 3829.742]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3829.742] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 3829.742]
[ 3829.743] Server terminated with error (1). Closing log file.
|
I wish someone can help me,thank you.
Last edited by cj7kuangke on Tue Sep 25, 2012 4:53 am; edited 2 times in total |
|
| Back to top |
|
 |
audiodef
Watchman
Joined: 06 Jul 2005
Posts: 6639
Location: The soundosphere
|
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5910
|
| Posted: Mon Sep 17, 2012 5:07 pm Post subject: |
|
|
what version on drivers do you use?
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Mon Sep 17, 2012 11:32 pm Post subject: |
|
|
| audiodef wrote: | You've got a segfault, which is not good.
Offhand, I would see what happens when you disable fglrx and use radeon. If that works, then it's a driver problem.
You could also try upgrading/downgrading xorg-server and/or the video driver.
(Psst. It's "I don't know", not "I don't", which leaves the reader wondering if the verb police need to hunt down a verb and bring it back in line.  ) |
I am sorry about the mistake! I will have a try,thank you. |
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Mon Sep 17, 2012 11:34 pm Post subject: |
|
|
| DaggyStyle wrote: | | what version on drivers do you use? |
ati-drivers 12.6 |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5910
|
| Posted: Tue Sep 18, 2012 5:11 am Post subject: |
|
|
| cj7kuangke wrote: | | DaggyStyle wrote: | | what version on drivers do you use? |
ati-drivers 12.6 |
are you using autodetect xorg.conf?
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Wed Sep 19, 2012 10:34 am Post subject: |
|
|
| DaggyStyle wrote: | | cj7kuangke wrote: | | DaggyStyle wrote: | | what version on drivers do you use? |
ati-drivers 12.6 |
are you using autodetect xorg.conf? |
Yes,I use the comand "aticonfig --initial",but it doesn'work.Then what should I do? |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5910
|
| Posted: Wed Sep 19, 2012 11:29 am Post subject: |
|
|
| cj7kuangke wrote: | | DaggyStyle wrote: | | cj7kuangke wrote: | | DaggyStyle wrote: | | what version on drivers do you use? |
ati-drivers 12.6 |
are you using autodetect xorg.conf? |
Yes,I use the comand "aticonfig --initial",but it doesn'work.Then what should I do? |
autodetect xorg.conf means that you have no xorg.conf under /etc/X
I'm not sure which you use.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Thu Sep 20, 2012 7:11 am Post subject: |
|
|
| DaggyStyle wrote: | | cj7kuangke wrote: | | DaggyStyle wrote: | | cj7kuangke wrote: | | DaggyStyle wrote: | | what version on drivers do you use? |
ati-drivers 12.6 |
are you using autodetect xorg.conf? |
Yes,I use the comand "aticonfig --initial",but it doesn'work.Then what should I do? |
autodetect xorg.conf means that you have no xorg.conf under /etc/X
I'm not sure which you use. |
This is my Xorg.conf.
| Code: |
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
Can you show me how to modify it ? My computer has two graphic card.One is AMD 6470M, the other is AMD 6250G. Thank you! |
|
| Back to top |
|
|
v_andal
Guru
Joined: 26 Aug 2008
Posts: 541
Location: Germany
|
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5910
|
| Posted: Thu Sep 20, 2012 8:14 am Post subject: |
|
|
ok, great, move xorg.conf to xorg.conf.orig and restart X, see if boots.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Thu Sep 20, 2012 2:44 pm Post subject: |
|
|
| DaggyStyle wrote: | | ok, great, move xorg.conf to xorg.conf.orig and restart X, see if boots. |
I have tried you advice ,but it doesn' work . So I use the driver "radeon" to replace "fglrx" ,but I still can't use the command "Xorg -configure". However, this time ,"startx" works, three mini windows(maybe twm?) shows up ,but problem is that I can't use mouse and keyboard to exit . I think it is the problem of "Xorg.conf". So, how can I create the file "Xorg.conf" suitable for my computer? Thank you for you great help! |
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Thu Sep 20, 2012 2:46 pm Post subject: |
|
|
I use "radeon" to replace "fglrx", can you tell me how to totally remove 'fglrx' from my computer? |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5910
|
| Posted: Thu Sep 20, 2012 4:09 pm Post subject: |
|
|
| cj7kuangke wrote: | | DaggyStyle wrote: | | ok, great, move xorg.conf to xorg.conf.orig and restart X, see if boots. |
I have tried you advice ,but it doesn' work . So I use the driver "radeon" to replace "fglrx" ,but I still can't use the command "Xorg -configure". However, this time ,"startx" works, three mini windows(maybe twm?) shows up ,but problem is that I can't use mouse and keyboard to exit . I think it is the problem of "Xorg.conf". So, how can I create the file "Xorg.conf" suitable for my computer? Thank you for you great help! |
no need, that is the great thing, nowadays you don't need it.
| cj7kuangke wrote: |
I use "radeon" to replace "fglrx", can you tell me how to totally remove 'fglrx' from my computer? |
emerge -aC x11-drivers/ati-drivers
we can still help you use Fglrx, all you need is to run it without xorg.conf and post Xorg.0.log here.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
v_andal
Guru
Joined: 26 Aug 2008
Posts: 541
Location: Germany
|
| Posted: Fri Sep 21, 2012 7:41 am Post subject: |
|
|
| cj7kuangke wrote: | | but problem is that I can't use mouse and keyboard to exit . I think it is the problem of "Xorg.conf". So, how can I create the file "Xorg.conf" suitable for my computer? |
Looks like your Xorg uses wrong devices for keyboard and mouse. Check /var/log/Xorg.0.log to see which devices are used. Search for lines like
| Quote: |
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
|
Following them should be information of configuring it as keyboard. When I had problem with keyboard and mouse, Xorg was picking up my UVC camera and configuring it as keyboard.
Here http://naiveprogrammer.blogspot.de/2011/01/linux-xorg-configuration.html I've described how I solved this problem. It was also discussed here on the forum, just try searching. |
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Sat Sep 22, 2012 1:14 am Post subject: |
|
|
| DaggyStyle wrote: | | cj7kuangke wrote: | | DaggyStyle wrote: | | ok, great, move xorg.conf to xorg.conf.orig and restart X, see if boots. |
I have tried you advice ,but it doesn' work . So I use the driver "radeon" to replace "fglrx" ,but I still can't use the command "Xorg -configure". However, this time ,"startx" works, three mini windows(maybe twm?) shows up ,but problem is that I can't use mouse and keyboard to exit . I think it is the problem of "Xorg.conf". So, how can I create the file "Xorg.conf" suitable for my computer? Thank you for you great help! |
no need, that is the great thing, nowadays you don't need it.
| cj7kuangke wrote: |
I use "radeon" to replace "fglrx", can you tell me how to totally remove 'fglrx' from my computer? |
emerge -aC x11-drivers/ati-drivers
we can still help you use Fglrx, all you need is to run it without xorg.conf and post Xorg.0.log here. |
I tried Fglrx once again, and startx without xorg.conf. Following is Xorg.0.log. Please help me check it.
| Code: |
[ 2944.203]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 2944.203] X Protocol Version 11, Revision 0
[ 2944.203] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
[ 2944.203] Current Operating System: Linux localhost 3.4.9-gentoo #13 SMP Fri Sep 21 14:43:52 Local time zone must be set--see zic x86_64
[ 2944.203] Kernel command line: root=/dev/sda10
[ 2944.204] Build Date: 21 September 2012 02:51:22PM
[ 2944.204]
[ 2944.204] Current version of pixman: 0.26.0
[ 2944.204] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2944.204] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2944.205] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 22 09:01:10 2012
[ 2944.205] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2944.205] (==) No Layout section. Using the first Screen section.
[ 2944.205] (==) No screen section available. Using defaults.
[ 2944.205] (**) |-->Screen "Default Screen Section" (0)
[ 2944.205] (**) | |-->Monitor "<default monitor>"
[ 2944.206] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2944.206] (==) Automatically adding devices
[ 2944.206] (==) Automatically enabling devices
[ 2944.206] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2944.206] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 2944.206] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2944.206] (II) Loader magic: 0x7d5ac0
[ 2944.206] (II) Module ABI versions:
[ 2944.206] X.Org ANSI C Emulation: 0.4
[ 2944.206] X.Org Video Driver: 12.0
[ 2944.206] X.Org XInput driver : 16.0
[ 2944.206] X.Org Server Extension : 6.0
[ 2944.207] (--) PCI:*(0:0:1:0) 1002:9647:17aa:397b rev 0, Mem @ 0xd0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 2944.207] (--) PCI: (0:1:0:0) 1002:6760:17aa:397b rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 2944.207] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2944.207] (II) LoadModule: "extmod"
[ 2944.207] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 2944.207] (II) Module extmod: vendor="X.Org Foundation"
[ 2944.207] compiled for 1.12.2, module version = 1.0.0
[ 2944.207] Module class: X.Org Server Extension
[ 2944.207] ABI class: X.Org Server Extension, version 6.0
[ 2944.207] (II) Loading extension MIT-SCREEN-SAVER
[ 2944.207] (II) Loading extension XFree86-VidModeExtension
[ 2944.207] (II) Loading extension XFree86-DGA
[ 2944.207] (II) Loading extension DPMS
[ 2944.207] (II) Loading extension XVideo
[ 2944.207] (II) Loading extension XVideo-MotionCompensation
[ 2944.207] (II) Loading extension X-Resource
[ 2944.207] (II) LoadModule: "dbe"
[ 2944.207] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 2944.207] (II) Module dbe: vendor="X.Org Foundation"
[ 2944.207] compiled for 1.12.2, module version = 1.0.0
[ 2944.207] Module class: X.Org Server Extension
[ 2944.207] ABI class: X.Org Server Extension, version 6.0
[ 2944.207] (II) Loading extension DOUBLE-BUFFER
[ 2944.207] (II) LoadModule: "glx"
[ 2944.208] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 2944.208] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2944.208] compiled for 6.9.0, module version = 1.0.0
[ 2944.208] (II) Loading extension GLX
[ 2944.208] (II) LoadModule: "record"
[ 2944.208] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 2944.208] (II) Module record: vendor="X.Org Foundation"
[ 2944.208] compiled for 1.12.2, module version = 1.13.0
[ 2944.208] Module class: X.Org Server Extension
[ 2944.208] ABI class: X.Org Server Extension, version 6.0
[ 2944.208] (II) Loading extension RECORD
[ 2944.208] (II) LoadModule: "dri"
[ 2944.208] (WW) Warning, couldn't open module dri
[ 2944.208] (II) UnloadModule: "dri"
[ 2944.208] (II) Unloading dri
[ 2944.208] (EE) Failed to load module "dri" (module does not exist, 0)
[ 2944.208] (II) LoadModule: "dri2"
[ 2944.209] (WW) Warning, couldn't open module dri2
[ 2944.209] (II) UnloadModule: "dri2"
[ 2944.209] (II) Unloading dri2
[ 2944.209] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 2944.209] (==) Matched ati as autoconfigured driver 0
[ 2944.209] (==) Matched vesa as autoconfigured driver 1
[ 2944.209] (==) Matched fbdev as autoconfigured driver 2
[ 2944.209] (==) Assigned the driver to the xf86ConfigLayout
[ 2944.209] (II) LoadModule: "ati"
[ 2944.209] (WW) Warning, couldn't open module ati
[ 2944.209] (II) UnloadModule: "ati"
[ 2944.209] (II) Unloading ati
[ 2944.209] (EE) Failed to load module "ati" (module does not exist, 0)
[ 2944.209] (II) LoadModule: "vesa"
[ 2944.209] (WW) Warning, couldn't open module vesa
[ 2944.209] (II) UnloadModule: "vesa"
[ 2944.209] (II) Unloading vesa
[ 2944.209] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2944.209] (II) LoadModule: "fbdev"
[ 2944.209] (WW) Warning, couldn't open module fbdev
[ 2944.209] (II) UnloadModule: "fbdev"
[ 2944.209] (II) Unloading fbdev
[ 2944.209] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2944.209] (EE) No drivers available.
[ 2944.209]
Fatal server error:
[ 2944.209] no screens found
[ 2944.210]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2944.210] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2944.210]
|
|
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Sat Sep 22, 2012 1:20 am Post subject: |
|
|
| v_andal wrote: | | cj7kuangke wrote: | | but problem is that I can't use mouse and keyboard to exit . I think it is the problem of "Xorg.conf". So, how can I create the file "Xorg.conf" suitable for my computer? |
Looks like your Xorg uses wrong devices for keyboard and mouse. Check /var/log/Xorg.0.log to see which devices are used. Search for lines like
| Quote: |
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
|
Following them should be information of configuring it as keyboard. When I had problem with keyboard and mouse, Xorg was picking up my UVC camera and configuring it as keyboard.
Here http://naiveprogrammer.blogspot.de/2011/01/linux-xorg-configuration.html I've described how I solved this problem. It was also discussed here on the forum, just try searching. |
Thank you for your help! But I can open the links,because of G*F*W  . I would search the forum for it . |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5910
|
| Posted: Sat Sep 22, 2012 7:33 am Post subject: |
|
|
| cj7kuangke wrote: | | DaggyStyle wrote: | | cj7kuangke wrote: | | DaggyStyle wrote: | | ok, great, move xorg.conf to xorg.conf.orig and restart X, see if boots. |
I have tried you advice ,but it doesn' work . So I use the driver "radeon" to replace "fglrx" ,but I still can't use the command "Xorg -configure". However, this time ,"startx" works, three mini windows(maybe twm?) shows up ,but problem is that I can't use mouse and keyboard to exit . I think it is the problem of "Xorg.conf". So, how can I create the file "Xorg.conf" suitable for my computer? Thank you for you great help! |
no need, that is the great thing, nowadays you don't need it.
| cj7kuangke wrote: |
I use "radeon" to replace "fglrx", can you tell me how to totally remove 'fglrx' from my computer? |
emerge -aC x11-drivers/ati-drivers
we can still help you use Fglrx, all you need is to run it without xorg.conf and post Xorg.0.log here. |
I tried Fglrx once again, and startx without xorg.conf. Following is Xorg.0.log. Please help me check it.
| Code: |
[ 2944.203]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 2944.203] X Protocol Version 11, Revision 0
[ 2944.203] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
[ 2944.203] Current Operating System: Linux localhost 3.4.9-gentoo #13 SMP Fri Sep 21 14:43:52 Local time zone must be set--see zic x86_64
[ 2944.203] Kernel command line: root=/dev/sda10
[ 2944.204] Build Date: 21 September 2012 02:51:22PM
[ 2944.204]
[ 2944.204] Current version of pixman: 0.26.0
[ 2944.204] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2944.204] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2944.205] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 22 09:01:10 2012
[ 2944.205] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2944.205] (==) No Layout section. Using the first Screen section.
[ 2944.205] (==) No screen section available. Using defaults.
[ 2944.205] (**) |-->Screen "Default Screen Section" (0)
[ 2944.205] (**) | |-->Monitor "<default monitor>"
[ 2944.206] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2944.206] (==) Automatically adding devices
[ 2944.206] (==) Automatically enabling devices
[ 2944.206] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2944.206] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 2944.206] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2944.206] (II) Loader magic: 0x7d5ac0
[ 2944.206] (II) Module ABI versions:
[ 2944.206] X.Org ANSI C Emulation: 0.4
[ 2944.206] X.Org Video Driver: 12.0
[ 2944.206] X.Org XInput driver : 16.0
[ 2944.206] X.Org Server Extension : 6.0
[ 2944.207] (--) PCI:*(0:0:1:0) 1002:9647:17aa:397b rev 0, Mem @ 0xd0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 2944.207] (--) PCI: (0:1:0:0) 1002:6760:17aa:397b rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 2944.207] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2944.207] (II) LoadModule: "extmod"
[ 2944.207] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 2944.207] (II) Module extmod: vendor="X.Org Foundation"
[ 2944.207] compiled for 1.12.2, module version = 1.0.0
[ 2944.207] Module class: X.Org Server Extension
[ 2944.207] ABI class: X.Org Server Extension, version 6.0
[ 2944.207] (II) Loading extension MIT-SCREEN-SAVER
[ 2944.207] (II) Loading extension XFree86-VidModeExtension
[ 2944.207] (II) Loading extension XFree86-DGA
[ 2944.207] (II) Loading extension DPMS
[ 2944.207] (II) Loading extension XVideo
[ 2944.207] (II) Loading extension XVideo-MotionCompensation
[ 2944.207] (II) Loading extension X-Resource
[ 2944.207] (II) LoadModule: "dbe"
[ 2944.207] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 2944.207] (II) Module dbe: vendor="X.Org Foundation"
[ 2944.207] compiled for 1.12.2, module version = 1.0.0
[ 2944.207] Module class: X.Org Server Extension
[ 2944.207] ABI class: X.Org Server Extension, version 6.0
[ 2944.207] (II) Loading extension DOUBLE-BUFFER
[ 2944.207] (II) LoadModule: "glx"
[ 2944.208] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 2944.208] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2944.208] compiled for 6.9.0, module version = 1.0.0
[ 2944.208] (II) Loading extension GLX
[ 2944.208] (II) LoadModule: "record"
[ 2944.208] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 2944.208] (II) Module record: vendor="X.Org Foundation"
[ 2944.208] compiled for 1.12.2, module version = 1.13.0
[ 2944.208] Module class: X.Org Server Extension
[ 2944.208] ABI class: X.Org Server Extension, version 6.0
[ 2944.208] (II) Loading extension RECORD
[ 2944.208] (II) LoadModule: "dri"
[ 2944.208] (WW) Warning, couldn't open module dri
[ 2944.208] (II) UnloadModule: "dri"
[ 2944.208] (II) Unloading dri
[ 2944.208] (EE) Failed to load module "dri" (module does not exist, 0)
[ 2944.208] (II) LoadModule: "dri2"
[ 2944.209] (WW) Warning, couldn't open module dri2
[ 2944.209] (II) UnloadModule: "dri2"
[ 2944.209] (II) Unloading dri2
[ 2944.209] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 2944.209] (==) Matched ati as autoconfigured driver 0
[ 2944.209] (==) Matched vesa as autoconfigured driver 1
[ 2944.209] (==) Matched fbdev as autoconfigured driver 2
[ 2944.209] (==) Assigned the driver to the xf86ConfigLayout
[ 2944.209] (II) LoadModule: "ati"
[ 2944.209] (WW) Warning, couldn't open module ati
[ 2944.209] (II) UnloadModule: "ati"
[ 2944.209] (II) Unloading ati
[ 2944.209] (EE) Failed to load module "ati" (module does not exist, 0)
[ 2944.209] (II) LoadModule: "vesa"
[ 2944.209] (WW) Warning, couldn't open module vesa
[ 2944.209] (II) UnloadModule: "vesa"
[ 2944.209] (II) Unloading vesa
[ 2944.209] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2944.209] (II) LoadModule: "fbdev"
[ 2944.209] (WW) Warning, couldn't open module fbdev
[ 2944.209] (II) UnloadModule: "fbdev"
[ 2944.209] (II) Unloading fbdev
[ 2944.209] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2944.209] (EE) No drivers available.
[ 2944.209]
Fatal server error:
[ 2944.209] no screens found
[ 2944.210]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2944.210] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2944.210]
|
|
according to this lo,g you haven't installed any drivers, install Fglrx and try again.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Sat Sep 22, 2012 8:06 am Post subject: |
|
|
| DaggyStyle wrote: | | according to this lo,g you haven't installed any drivers, install Fglrx and try again. |
But I did 'emerge ati-drivers' , 'lsmod' shows the modules 'Fglrx' . The following is the Xorg.0.log using xorg.conf created by the command 'aticonfig --initial' .
| Code: |
[ 2368.008]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 2368.009] X Protocol Version 11, Revision 0
[ 2368.009] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
[ 2368.009] Current Operating System: Linux localhost 3.4.9-gentoo #13 SMP Fri Sep 21 14:43:52 Local time zone must be set--see zic x86_64
[ 2368.009] Kernel command line: root=/dev/sda10
[ 2368.009] Build Date: 21 September 2012 02:51:22PM
[ 2368.009]
[ 2368.010] Current version of pixman: 0.26.0
[ 2368.010] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2368.010] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2368.011] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 22 08:51:34 2012
[ 2368.011] (==) Using config file: "/etc/X11/xorg.conf"
[ 2368.011] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2368.011] (==) ServerLayout "aticonfig Layout"
[ 2368.011] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2368.011] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2368.012] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2368.012] (==) Automatically adding devices
[ 2368.012] (==) Automatically enabling devices
[ 2368.012] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2368.012] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 2368.012] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2368.012] (II) Loader magic: 0x7d5ac0
[ 2368.012] (II) Module ABI versions:
[ 2368.012] X.Org ANSI C Emulation: 0.4
[ 2368.012] X.Org Video Driver: 12.0
[ 2368.012] X.Org XInput driver : 16.0
[ 2368.012] X.Org Server Extension : 6.0
[ 2368.013] (--) PCI:*(0:0:1:0) 1002:9647:17aa:397b rev 0, Mem @ 0xd0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 2368.013] (--) PCI: (0:1:0:0) 1002:6760:17aa:397b rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 2368.013] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2368.013] (II) "extmod" will be loaded by default.
[ 2368.013] (II) "dbe" will be loaded by default.
[ 2368.013] (II) "glx" will be loaded by default.
[ 2368.013] (II) "record" will be loaded by default.
[ 2368.013] (II) "dri" will be loaded by default.
[ 2368.013] (II) "dri2" will be loaded by default.
[ 2368.013] (II) LoadModule: "extmod"
[ 2368.013] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 2368.013] (II) Module extmod: vendor="X.Org Foundation"
[ 2368.013] compiled for 1.12.2, module version = 1.0.0
[ 2368.013] Module class: X.Org Server Extension
[ 2368.013] ABI class: X.Org Server Extension, version 6.0
[ 2368.013] (II) Loading extension MIT-SCREEN-SAVER
[ 2368.013] (II) Loading extension XFree86-VidModeExtension
[ 2368.013] (II) Loading extension XFree86-DGA
[ 2368.013] (II) Loading extension DPMS
[ 2368.013] (II) Loading extension XVideo
[ 2368.013] (II) Loading extension XVideo-MotionCompensation
[ 2368.013] (II) Loading extension X-Resource
[ 2368.013] (II) LoadModule: "dbe"
[ 2368.013] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 2368.013] (II) Module dbe: vendor="X.Org Foundation"
[ 2368.013] compiled for 1.12.2, module version = 1.0.0
[ 2368.013] Module class: X.Org Server Extension
[ 2368.013] ABI class: X.Org Server Extension, version 6.0
[ 2368.013] (II) Loading extension DOUBLE-BUFFER
[ 2368.013] (II) LoadModule: "glx"
[ 2368.014] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 2368.014] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2368.014] compiled for 6.9.0, module version = 1.0.0
[ 2368.014] (II) Loading extension GLX
[ 2368.014] (II) LoadModule: "record"
[ 2368.014] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 2368.014] (II) Module record: vendor="X.Org Foundation"
[ 2368.014] compiled for 1.12.2, module version = 1.13.0
[ 2368.014] Module class: X.Org Server Extension
[ 2368.014] ABI class: X.Org Server Extension, version 6.0
[ 2368.014] (II) Loading extension RECORD
[ 2368.014] (II) LoadModule: "dri"
[ 2368.014] (WW) Warning, couldn't open module dri
[ 2368.014] (II) UnloadModule: "dri"
[ 2368.014] (II) Unloading dri
[ 2368.014] (EE) Failed to load module "dri" (module does not exist, 0)
[ 2368.014] (II) LoadModule: "dri2"
[ 2368.015] (WW) Warning, couldn't open module dri2
[ 2368.015] (II) UnloadModule: "dri2"
[ 2368.015] (II) Unloading dri2
[ 2368.015] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 2368.015] (II) LoadModule: "fglrx"
[ 2368.015] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 2368.031] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2368.031] compiled for 1.4.99.906, module version = 8.98.2
[ 2368.032] Module class: X.Org Video Driver
[ 2368.032] (II) Loading sub module "fglrxdrm"
[ 2368.032] (II) LoadModule: "fglrxdrm"
[ 2368.032] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 2368.032] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2368.032] compiled for 1.4.99.906, module version = 8.98.2
[ 2368.032] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[ 2368.032] (II) AMD Proprietary Linux Driver Release Identifier: 8.98
[ 2368.032] (II) AMD Proprietary Linux Driver Build Date: Jun 11 2012 11:57:59
[ 2368.032] (--) using VT number 7
[ 2368.034] (WW) Falling back to old probe method for fglrx
[ 2368.041] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 2368.041] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found
[ 2368.041] (--) Chipset Supported AMD Graphics Processor (0x6760) found
[ 2368.042] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 2368.042] (**) ChipID override: 0x9647
[ 2368.042] (**) Chipset Supported AMD Graphics Processor (0x9647) found
[ 2368.044] ukiDynamicMajor: found major device number 250
[ 2368.044] ukiDynamicMajor: found major device number 250
[ 2368.044] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2368.044] ukiOpenDevice: node name is /dev/ati/card0
[ 2368.044] ukiOpenDevice: open result is 7, (OK)
[ 2368.044] ukiOpenByBusid: ukiOpenMinor returns 7
[ 2368.044] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 2368.044] ukiOpenDevice: node name is /dev/ati/card1
[ 2368.044] ukiOpenDevice: open result is 7, (OK)
[ 2368.044] ukiOpenByBusid: ukiOpenMinor returns 7
[ 2368.044] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2368.046] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 2368.046] (II) AMD Video driver is signed
[ 2368.047] (II) fglrx(0): pEnt->device->identifier=0x21f6890
[ 2368.047] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 2368.047] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2368.047] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2368.047] (==) fglrx(0): Default visual is TrueColor
[ 2368.047] (**) fglrx(0): Option "DPMS" "true"
[ 2368.047] (==) fglrx(0): RGB weight 888
[ 2368.047] (II) fglrx(0): Using 8 bits per RGB
[ 2368.048] (==) fglrx(0): Buffer Tiling is ON
[ 2368.048] (II) Loading sub module "fglrxdrm"
[ 2368.048] (II) LoadModule: "fglrxdrm"
[ 2368.048] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 2368.048] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2368.048] compiled for 1.4.99.906, module version = 8.98.2
[ 2368.050] ukiDynamicMajor: found major device number 250
[ 2368.050] ukiDynamicMajor: found major device number 250
[ 2368.050] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2368.050] ukiOpenDevice: node name is /dev/ati/card0
[ 2368.050] ukiOpenDevice: open result is 11, (OK)
[ 2368.050] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2368.050] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 2368.050] ukiOpenDevice: node name is /dev/ati/card1
[ 2368.050] ukiOpenDevice: open result is 11, (OK)
[ 2368.050] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2368.050] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2368.050] (**) fglrx(0): NoAccel = NO
[ 2368.050] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2368.050] (--) fglrx(0): Chipset: "AMD Radeon HD 6400M Series" (Chipset = 0x6760)
[ 2368.050] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x397b)
[ 2368.050] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2368.050] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 2368.050] (--) fglrx(0): MMIO registers at 0xf0200000
[ 2368.050] (--) fglrx(0): I/O port at 0x00002000
[ 2368.050] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2368.051] (II) fglrx(0): ATIF platform detected
[ 2368.052] (II) fglrx(0): AC Adapter is used
[ 2370.231] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2370.231] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 2370.231] (II) fglrx(0): PCIE card detected
[ 2370.231] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2370.231] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2370.233]
[ 2370.233] Backtrace:
[ 2370.233] 0: /usr/bin/X (xorg_backtrace+0x36) [0x56d6d6]
[ 2370.233] 1: /usr/bin/X (0x400000+0x171189) [0x571189]
[ 2370.233] 2: /lib64/libpthread.so.0 (0x7f31cebc8000+0x10420) [0x7f31cebd8420]
[ 2370.233] 3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs112_atiddxPreInit+0x11fb) [0x7f31cbb8c42b]
[ 2370.233] 4: /usr/bin/X (InitOutput+0x812) [0x476392]
[ 2370.233] 5: /usr/bin/X (0x400000+0x24b83) [0x424b83]
[ 2370.233] 6: /lib64/libc.so.6 (__libc_start_main+0xfd) [0x7f31cdafc2ad]
[ 2370.233] 7: /usr/bin/X (0x400000+0x248e9) [0x4248e9]
[ 2370.233]
[ 2370.233] Segmentation fault at address (nil)
[ 2370.233]
Fatal server error:
[ 2370.233] Caught signal 11 (Segmentation fault). Server aborting
[ 2370.233]
[ 2370.233]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2370.233] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2370.233]
[ 2370.234] Server terminated with error (1). Closing log file.
|
|
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5910
|
| Posted: Sat Sep 22, 2012 8:22 am Post subject: |
|
|
| cj7kuangke wrote: | | DaggyStyle wrote: | | according to this lo,g you haven't installed any drivers, install Fglrx and try again. |
But I did 'emerge ati-drivers' , 'lsmod' shows the modules 'Fglrx' . The following is the Xorg.0.log using xorg.conf created by the command 'aticonfig --initial' .
| Code: |
[ 2368.008]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 2368.009] X Protocol Version 11, Revision 0
[ 2368.009] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
[ 2368.009] Current Operating System: Linux localhost 3.4.9-gentoo #13 SMP Fri Sep 21 14:43:52 Local time zone must be set--see zic x86_64
[ 2368.009] Kernel command line: root=/dev/sda10
[ 2368.009] Build Date: 21 September 2012 02:51:22PM
[ 2368.009]
[ 2368.010] Current version of pixman: 0.26.0
[ 2368.010] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2368.010] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2368.011] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 22 08:51:34 2012
[ 2368.011] (==) Using config file: "/etc/X11/xorg.conf"
[ 2368.011] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2368.011] (==) ServerLayout "aticonfig Layout"
[ 2368.011] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2368.011] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2368.012] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2368.012] (==) Automatically adding devices
[ 2368.012] (==) Automatically enabling devices
[ 2368.012] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2368.012] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 2368.012] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2368.012] (II) Loader magic: 0x7d5ac0
[ 2368.012] (II) Module ABI versions:
[ 2368.012] X.Org ANSI C Emulation: 0.4
[ 2368.012] X.Org Video Driver: 12.0
[ 2368.012] X.Org XInput driver : 16.0
[ 2368.012] X.Org Server Extension : 6.0
[ 2368.013] (--) PCI:*(0:0:1:0) 1002:9647:17aa:397b rev 0, Mem @ 0xd0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 2368.013] (--) PCI: (0:1:0:0) 1002:6760:17aa:397b rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 2368.013] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2368.013] (II) "extmod" will be loaded by default.
[ 2368.013] (II) "dbe" will be loaded by default.
[ 2368.013] (II) "glx" will be loaded by default.
[ 2368.013] (II) "record" will be loaded by default.
[ 2368.013] (II) "dri" will be loaded by default.
[ 2368.013] (II) "dri2" will be loaded by default.
[ 2368.013] (II) LoadModule: "extmod"
[ 2368.013] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 2368.013] (II) Module extmod: vendor="X.Org Foundation"
[ 2368.013] compiled for 1.12.2, module version = 1.0.0
[ 2368.013] Module class: X.Org Server Extension
[ 2368.013] ABI class: X.Org Server Extension, version 6.0
[ 2368.013] (II) Loading extension MIT-SCREEN-SAVER
[ 2368.013] (II) Loading extension XFree86-VidModeExtension
[ 2368.013] (II) Loading extension XFree86-DGA
[ 2368.013] (II) Loading extension DPMS
[ 2368.013] (II) Loading extension XVideo
[ 2368.013] (II) Loading extension XVideo-MotionCompensation
[ 2368.013] (II) Loading extension X-Resource
[ 2368.013] (II) LoadModule: "dbe"
[ 2368.013] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 2368.013] (II) Module dbe: vendor="X.Org Foundation"
[ 2368.013] compiled for 1.12.2, module version = 1.0.0
[ 2368.013] Module class: X.Org Server Extension
[ 2368.013] ABI class: X.Org Server Extension, version 6.0
[ 2368.013] (II) Loading extension DOUBLE-BUFFER
[ 2368.013] (II) LoadModule: "glx"
[ 2368.014] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 2368.014] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2368.014] compiled for 6.9.0, module version = 1.0.0
[ 2368.014] (II) Loading extension GLX
[ 2368.014] (II) LoadModule: "record"
[ 2368.014] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 2368.014] (II) Module record: vendor="X.Org Foundation"
[ 2368.014] compiled for 1.12.2, module version = 1.13.0
[ 2368.014] Module class: X.Org Server Extension
[ 2368.014] ABI class: X.Org Server Extension, version 6.0
[ 2368.014] (II) Loading extension RECORD
[ 2368.014] (II) LoadModule: "dri"
[ 2368.014] (WW) Warning, couldn't open module dri
[ 2368.014] (II) UnloadModule: "dri"
[ 2368.014] (II) Unloading dri
[ 2368.014] (EE) Failed to load module "dri" (module does not exist, 0)
[ 2368.014] (II) LoadModule: "dri2"
[ 2368.015] (WW) Warning, couldn't open module dri2
[ 2368.015] (II) UnloadModule: "dri2"
[ 2368.015] (II) Unloading dri2
[ 2368.015] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 2368.015] (II) LoadModule: "fglrx"
[ 2368.015] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 2368.031] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2368.031] compiled for 1.4.99.906, module version = 8.98.2
[ 2368.032] Module class: X.Org Video Driver
[ 2368.032] (II) Loading sub module "fglrxdrm"
[ 2368.032] (II) LoadModule: "fglrxdrm"
[ 2368.032] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 2368.032] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2368.032] compiled for 1.4.99.906, module version = 8.98.2
[ 2368.032] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[ 2368.032] (II) AMD Proprietary Linux Driver Release Identifier: 8.98
[ 2368.032] (II) AMD Proprietary Linux Driver Build Date: Jun 11 2012 11:57:59
[ 2368.032] (--) using VT number 7
[ 2368.034] (WW) Falling back to old probe method for fglrx
[ 2368.041] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 2368.041] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found
[ 2368.041] (--) Chipset Supported AMD Graphics Processor (0x6760) found
[ 2368.042] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 2368.042] (**) ChipID override: 0x9647
[ 2368.042] (**) Chipset Supported AMD Graphics Processor (0x9647) found
[ 2368.044] ukiDynamicMajor: found major device number 250
[ 2368.044] ukiDynamicMajor: found major device number 250
[ 2368.044] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2368.044] ukiOpenDevice: node name is /dev/ati/card0
[ 2368.044] ukiOpenDevice: open result is 7, (OK)
[ 2368.044] ukiOpenByBusid: ukiOpenMinor returns 7
[ 2368.044] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 2368.044] ukiOpenDevice: node name is /dev/ati/card1
[ 2368.044] ukiOpenDevice: open result is 7, (OK)
[ 2368.044] ukiOpenByBusid: ukiOpenMinor returns 7
[ 2368.044] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2368.046] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 2368.046] (II) AMD Video driver is signed
[ 2368.047] (II) fglrx(0): pEnt->device->identifier=0x21f6890
[ 2368.047] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 2368.047] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2368.047] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2368.047] (==) fglrx(0): Default visual is TrueColor
[ 2368.047] (**) fglrx(0): Option "DPMS" "true"
[ 2368.047] (==) fglrx(0): RGB weight 888
[ 2368.047] (II) fglrx(0): Using 8 bits per RGB
[ 2368.048] (==) fglrx(0): Buffer Tiling is ON
[ 2368.048] (II) Loading sub module "fglrxdrm"
[ 2368.048] (II) LoadModule: "fglrxdrm"
[ 2368.048] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 2368.048] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2368.048] compiled for 1.4.99.906, module version = 8.98.2
[ 2368.050] ukiDynamicMajor: found major device number 250
[ 2368.050] ukiDynamicMajor: found major device number 250
[ 2368.050] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2368.050] ukiOpenDevice: node name is /dev/ati/card0
[ 2368.050] ukiOpenDevice: open result is 11, (OK)
[ 2368.050] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2368.050] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 2368.050] ukiOpenDevice: node name is /dev/ati/card1
[ 2368.050] ukiOpenDevice: open result is 11, (OK)
[ 2368.050] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2368.050] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2368.050] (**) fglrx(0): NoAccel = NO
[ 2368.050] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2368.050] (--) fglrx(0): Chipset: "AMD Radeon HD 6400M Series" (Chipset = 0x6760)
[ 2368.050] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x397b)
[ 2368.050] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2368.050] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 2368.050] (--) fglrx(0): MMIO registers at 0xf0200000
[ 2368.050] (--) fglrx(0): I/O port at 0x00002000
[ 2368.050] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2368.051] (II) fglrx(0): ATIF platform detected
[ 2368.052] (II) fglrx(0): AC Adapter is used
[ 2370.231] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2370.231] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 2370.231] (II) fglrx(0): PCIE card detected
[ 2370.231] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2370.231] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2370.233]
[ 2370.233] Backtrace:
[ 2370.233] 0: /usr/bin/X (xorg_backtrace+0x36) [0x56d6d6]
[ 2370.233] 1: /usr/bin/X (0x400000+0x171189) [0x571189]
[ 2370.233] 2: /lib64/libpthread.so.0 (0x7f31cebc8000+0x10420) [0x7f31cebd8420]
[ 2370.233] 3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs112_atiddxPreInit+0x11fb) [0x7f31cbb8c42b]
[ 2370.233] 4: /usr/bin/X (InitOutput+0x812) [0x476392]
[ 2370.233] 5: /usr/bin/X (0x400000+0x24b83) [0x424b83]
[ 2370.233] 6: /lib64/libc.so.6 (__libc_start_main+0xfd) [0x7f31cdafc2ad]
[ 2370.233] 7: /usr/bin/X (0x400000+0x248e9) [0x4248e9]
[ 2370.233]
[ 2370.233] Segmentation fault at address (nil)
[ 2370.233]
Fatal server error:
[ 2370.233] Caught signal 11 (Segmentation fault). Server aborting
[ 2370.233]
[ 2370.233]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2370.233] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2370.233]
[ 2370.234] Server terminated with error (1). Closing log file.
|
|
ok. let me be more clear here, install ati-drivers, make sure the module is up and run X without any xorg.conf.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
cj7kuangke
n00b
Joined: 12 Sep 2012
Posts: 12
|
| Posted: Sun Sep 23, 2012 3:00 am Post subject: |
|
|
| DaggyStyle wrote: |
ok. let me be more clear here, install ati-drivers, make sure the module is up and run X without any xorg.conf. |
Thank you for your help. I think I have solved the problem. I use the copy of "xorg.conf.new" and make some changes to it .Now I am writing to you in Xfce4 ! |
|
| Back to top |
|
|
DaggyStyle
Watchman
Joined: 22 Mar 2006
Posts: 5910
|
| Posted: Sun Sep 23, 2012 5:39 am Post subject: |
|
|
| cj7kuangke wrote: | | DaggyStyle wrote: |
ok. let me be more clear here, install ati-drivers, make sure the module is up and run X without any xorg.conf. |
Thank you for your help. I think I have solved the problem. I use the copy of "xorg.conf.new" and make some changes to it .Now I am writing to you in Xfce4 ! |
just make sure that you are using the ati driver and not mesa, if so, please mark as solved.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
