Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
fdisk won't see /dev/sda
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
elhaz
n00b
n00b


Joined: 04 Jan 2013
Posts: 3

PostPosted: Fri Jan 04, 2013 9:06 pm    Post subject: fdisk won't see /dev/sda Reply with quote

hello, I'm currently installing gentoo on this old pc of mine, and things are going bad like all the time.
now I got this problem with fdisk which just won't see /dev/sda. it was no problem before, but I had this clock issue so I had to change battery on the motherboard, and now I'm getting this.

here is the output I get from fdisk:
Code:
livecd ~ # fdisk /dev/sda         
fdisk: unable to open /dev/sda: No such file or directory


there is nothing in /dev/ that could possibly explain why /sda or /sdb or anything alike is just not there:
Code:
livecd ~ # ls /dev
3:0:0:0          fd            loop3               port   ram5        tgt    tty21  tty36  tty50  tty8     vcs12   vcsa4
block            fd0           loop4               ppp    ram6        tty    tty22  tty37  tty51  tty9     vcs2    vcsa5
bsg              flush         loop5               psaux  ram7        tty0   tty23  tty38  tty52  ttyS0    vcs3    vcsa6
btrfs-control    full          loop6               ptmx   ram8        tty1   tty24  tty39  tty53  ttyS1    vcs4    vcsa7
bus              fuse          loop7               pts    ram9        tty10  tty25  tty4   tty54  ttyS2    vcs5    vcsa8
char             gpmctl        mapper              ram0   random      tty11  tty26  tty40  tty55  ttyS3    vcs6    vcsa9
console          initctl       mcelog              ram1   revalidate  tty12  tty27  tty41  tty56  urandom  vcs7    vga_arbiter
cpu_dma_latency  input         mdev.seq            ram10  rtc         tty13  tty28  tty42  tty57  usb1     vcs8    zero
dac960_gam       interfaces    megadev0            ram11  scd0        tty14  tty29  tty43  tty58  usb2     vcs9
device-mapper    kmem          mem                 ram12  sg0         tty15  tty3   tty44  tty59  usb3     vcsa
discover         kmsg          mice                ram13  shm         tty16  tty30  tty45  tty6   usb4     vcsa1
disk             log           mpt2ctl             ram14  snd         tty17  tty31  tty46  tty60  usb5     vcsa10
err              loop-control  net                 ram15  sr0         tty18  tty32  tty47  tty61  vcs      vcsa11
etherd           loop0         network_latency     ram2   stderr      tty19  tty33  tty48  tty62  vcs1     vcsa12
event0           loop1         network_throughput  ram3   stdin       tty2   tty34  tty49  tty63  vcs10    vcsa2
fb0              loop2         null                ram4   stdout      tty20  tty35  tty5   tty7   vcs11    vcsa3


and df doesn't seem to like me eather:
Code:
livecd ~ # df -h
df: '/mnt/cdrom': No such file or directory
Filesystem      Size  Used Avail Use% Mounted on
rootfs          437M   36M  401M   9% /
udev             10M  4.0K   10M   1% /dev
/dev/loop0      108M  108M     0 100% /mnt/livecd
tmpfs           437M  264K  436M   1% /run
shm             437M     0  437M   0% /dev/shm
tmpfs           437M     0  437M   0% /mnt/livecd/lib/firmware
tmpfs           437M     0  437M   0% /mnt/livecd/usr/portage


dunno if it's can be useful but here is dmesg output as well:
Code:
livecd ~ # dmesg
Linux version 3.5.7-gentoo (root@skimmer) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #1 SMP Thu Dec 13 04:50:11 UTC 2012
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f69ffff] usable
BIOS-e820: [mem 0x000000007f6a0000-0x000000007f6adfff] ACPI data
BIOS-e820: [mem 0x000000007f6ae000-0x000000007f6dffff] ACPI NVS
BIOS-e820: [mem 0x000000007f6e0000-0x000000007f6fffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
DMI: System manufacturer System Product Name/P5KPL-VM, BIOS 0802    03/26/2008
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7f6a0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07F700000 mask FFFF00000 uncachable
  2 base 07F800000 mask FFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 895MB will be used.
Use a HIGHMEM enabled kernel.
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
initial memory mapped: [mem 0x00000000-0x017fffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37f12fff]
 [mem 0x00000000-0x003fffff] page 4k
 [mem 0x00400000-0x37bfffff] page 2M
 [mem 0x37c00000-0x37f12fff] page 4k
kernel direct mapping tables up to 0x37f12fff @ [mem 0x017fa000-0x017fffff]
RAMDISK: [mem 0x7f2f5000-0x7f67efff]
Allocated new RAMDISK: [mem 0x37b89000-0x37f1263f]
Move RAMDISK from [mem 0x7f2f5000-0x7f67e63f] to [mem 0x37b89000-0x37f1263f]
ACPI: RSDP 000fb7e0 00014 (v00 ACPIAM)
ACPI: RSDT 7f6a0000 0003C (v01 A_M_I_ OEMRSDT  03000826 MSFT 00000097)
ACPI: FACP 7f6a0200 00084 (v02 A_M_I_ OEMFACP  03000826 MSFT 00000097)
ACPI: DSDT 7f6a05c0 06FC6 (v01  A0844 A0844000 00000000 INTL 20051117)
ACPI: FACS 7f6ae000 00040
ACPI: APIC 7f6a0390 0006C (v01 A_M_I_ OEMAPIC  03000826 MSFT 00000097)
ACPI: MCFG 7f6a0400 0003C (v01 A_M_I_ OEMMCFG  03000826 MSFT 00000097)
ACPI: OEMB 7f6ae040 00080 (v01 A_M_I_ AMI_OEM  03000826 MSFT 00000097)
ACPI: HPET 7f6a7590 00038 (v01 A_M_I_ OEMHPET  03000826 MSFT 00000097)
ACPI: GSCI 7f6ae0c0 02024 (v01 A_M_I_ GMCHSCI  03000826 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
895MB LOWMEM available.
  mapped low ram: 0 - 37f13000
  low ram: 0 - 37f13000
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  Normal   [mem 0x01000000-0x37f12fff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009efff]
  node   0: [mem 0x00100000-0x7f69ffff]
On node 0 totalpages: 229026
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1759 pages used for memmap
  Normal zone: 223284 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0x7f700000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f6b53000 s24768 r0 d24384 u49152
pcpu-alloc: s24768 r0 d24384 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227235
Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
Memory: 889392k/916556k available (3535k kernel code, 26712k reserved, 1308k data, 412k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
    vmalloc : 0xf8713000 - 0xfff13000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7f13000   ( 895 MB)
      .init : 0xc14bb000 - 0xc1522000   ( 412 kB)
      .data : 0xc1373e65 - 0xc14bafc0   (1308 kB)
      .text : 0xc1000000 - 0xc1373e65   (3535 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f6406000 soft=f6408000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.105 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.21 BogoMIPS (lpj=24001050)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120320
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual  CPU  E2220  @ 2.40GHz stepping 0d
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU 1 irqstacks, hard=f6490000 soft=f6492000
Initializing CPU#1
Booting Node   0, Processors  #1
Brought up 2 CPUs
Total of 2 processors activated (9600.42 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 7f6b00f0 00256 (v01    AMI   CPU1PM 00000001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00256 (v01    AMI   CPU1PM 00000001 INTL 20051117)
ACPI: SSDT 7f6b0350 00143 (v01    AMI   CPU2PM 00000001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00143 (v01    AMI   CPU2PM 00000001 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x7f700000-0xffffffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfea7ffff]
pci 0000:00:02.0: reg 14: [io  0xec00-0xec07]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.1: [8086:29c3] type 00 class 0x038000
pci 0000:00:02.1: reg 10: [mem 0xfea80000-0xfeafffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfe8f8000-0xfe8fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io  0xe400-0xe41f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io  0xe480-0xe49f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io  0xe800-0xe81f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io  0xe880-0xe89f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xfe8f7c00-0xfe8f7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io  0xe080-0xe087]
pci 0000:00:1f.2: reg 14: [io  0xe000-0xe003]
pci 0000:00:1f.2: reg 18: [io  0xdc00-0xdc07]
pci 0000:00:1f.2: reg 1c: [io  0xd880-0xd883]
pci 0000:00:1f.2: reg 20: [io  0xd800-0xd80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0: [1969:1048] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xfeba0000-0xfebbffff pref]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 01-01]
pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f6a0000-0x7fffffff]
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x7f700000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: [io  0x03f0-0x03f5]
pnp 00:06: [io  0x03f7]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [irq 7]
pnp 00:07: [dma 3]
pnp 00:07: [io  0x0378-0x037f]
pnp 00:07: [io  0x0778-0x077f]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:08: [io  0x0000-0xffffffff disabled]
pnp 00:08: [io  0x0000-0xffffffff disabled]
pnp 00:08: [io  0x0290-0x0297]
system 00:08: [io  0x0290-0x0297] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x0010-0x001f]
pnp 00:09: [io  0x0022-0x003f]
pnp 00:09: [io  0x0044-0x005f]
pnp 00:09: [io  0x0062-0x0063]
pnp 00:09: [io  0x0065-0x006f]
pnp 00:09: [io  0x0072-0x007f]
pnp 00:09: [io  0x0080]
pnp 00:09: [io  0x0084-0x0086]
pnp 00:09: [io  0x0088]
pnp 00:09: [io  0x008c-0x008e]
pnp 00:09: [io  0x0090-0x009f]
pnp 00:09: [io  0x00a2-0x00bf]
pnp 00:09: [io  0x00e0-0x00ef]
pnp 00:09: [io  0x04d0-0x04d1]
pnp 00:09: [io  0x0800-0x087f]
pnp 00:09: [io  0x0000-0xffffffff disabled]
pnp 00:09: [io  0x0480-0x04bf]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfed20000-0xfed8ffff]
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: [io  0x0800-0x087f] has been reserved
system 00:09: [io  0x0480-0x04bf] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0b: [mem 0xffb00000-0xffbfffff]
pnp 00:0b: [mem 0xfff00000-0xffffffff]
pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0c: [mem 0xffc00000-0xffefffff]
system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [io  0x0060]
pnp 00:0e: [io  0x0064]
pnp 00:0e: [irq 1]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0f: [irq 4]
pnp 00:0f: [dma 0 disabled]
pnp 00:0f: [io  0x03f8-0x03ff]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:10: [mem 0xf0000000-0xf3ffffff]
system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:11: [mem 0x00000000-0x0009ffff]
pnp 00:11: [mem 0x000c0000-0x000cffff]
pnp 00:11: [mem 0x000e0000-0x000fffff]
pnp 00:11: [mem 0x00100000-0x7f6fffff]
pnp 00:11: [mem 0x00000000-0xffffffff disabled]
system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:11: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:11: [mem 0x00100000-0x7f6fffff] could not be reserved
system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 18 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02-02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 01-01] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f700000-0x7f8fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f900000-0x7fafffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x7fb00000-0x7fcfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x7f700000-0x7f8fffff]
pci 0000:00:1c.0:   bridge window [mem 0x7f900000-0x7fafffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 01-01]
pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.1:   bridge window [mem 0x7fb00000-0x7fcfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.1: enabling device (0106 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7f700000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x7f700000-0x7f8fffff]
pci_bus 0000:02: resource 2 [mem 0x7f900000-0x7fafffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:01: resource 2 [mem 0x7fb00000-0x7fcfffff 64bit pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0x7f700000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3624k freed
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NTFS driver 2.1.30 [Flags: R/O].
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
msgmni has been set to 1744
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
intel_rng: FWH not detected
Linux agpgart interface v0.103
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8780000, using 3072k, total 8128k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
SCSI Media Changer driver v0.25
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.8
aoe: AoE v47 initialised.
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 412k freed
Write protecting the kernel text: 3536k
Write protecting the kernel read-only data: 1104k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
libata version 3.00 loaded.
Refined TSC clocksource calibration: 2399.999 MHz.
Switching to clocksource tsc
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [
 P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 19
ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 19
ata4.01: NODEV after polling detection
ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223C  SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg0 type 5
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.2-0[28900]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.03-k.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
mpt2sas version 13.100.00.00 loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8f7c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.7-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: mmxx1     3248 MB/s
raid6: mmxx2     3618 MB/s
raid6: sse1x1    2099 MB/s
raid6: sse1x2    2590 MB/s
raid6: sse2x1    3735 MB/s
raid6: sse2x2    4092 MB/s
raid6: using algorithm sse2x2 (4092 MB/s)
raid6: using ssse3x1 recovery algorithm
async_tx: api initialized (async)
xor: automatically using best checksumming function:
   pIII_sse  :  8798.800 MB/sec
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
md: linear personality registered for level -1
md: multipath personality registered for level -4
Btrfs loaded
JFS: nTxBlock = 6979, nTxLock = 55839
fuse init (API version 7.19)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
udevd[18690]: starting version 171
atl1 0000:01:00.0: version 2.1.3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Real Time Clock Driver v1.12b
warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
atl1 0000:01:00.0: Unable to enable MSI: -1
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
atl1 0000:01:00.0: eth0 link is up 100 Mbps full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


any ideas of what the problem could be and how it can be fixed? thanks!
Back to top
View user's profile Send private message
John R. Graham
Administrator
Administrator


Joined: 08 Mar 2005
Posts: 10673
Location: Somewhere over Atlanta, Georgia

PostPosted: Fri Jan 04, 2013 9:43 pm    Post subject: Reply with quote

Based on your symptoms, you probably need to enable the hard drive controller in the BIOS setup screen. Whatever settings you had, you lost when you replaced the battery and now are operating on default settings. Strange that it would default to off, but there have been stranger things.

- John
_________________
I can confirm that I have received between 0 and 499 National Security Letters.
Back to top
View user's profile Send private message
elhaz
n00b
n00b


Joined: 04 Jan 2013
Posts: 3

PostPosted: Fri Jan 04, 2013 10:36 pm    Post subject: Reply with quote

I did double check and tried to load with different bios hdc settings and than even checked the jumpers, and figured out that bios won't see my hard drive. have really no idea of how to fix it - google tells me that in this case hard can be possibly broken, and than it's not a gentoo issue, but the hard drive issue.

but thanks for your quick unswer, John! :)
Back to top
View user's profile Send private message
BillWho
Veteran
Veteran


Joined: 03 Mar 2012
Posts: 1600
Location: US

PostPosted: Fri Jan 04, 2013 10:41 pm    Post subject: Reply with quote

elhaz,

When the drive went bad in my laptop it showed in the bios info screen, but I was getting an error when starting the computer and booting a live cd didn't show any /dev/sd devices.

Sounds like you're having the same problem :!:
_________________
Good luck :wink:

Since installing gentoo, my life has become one long emerge :)
Back to top
View user's profile Send private message
Hu
Administrator
Administrator


Joined: 06 Mar 2007
Posts: 22796

PostPosted: Fri Jan 04, 2013 11:19 pm    Post subject: Reply with quote

John R. Graham wrote:
Based on your symptoms, you probably need to enable the hard drive controller in the BIOS setup screen. Whatever settings you had, you lost when you replaced the battery and now are operating on default settings. Strange that it would default to off, but there have been stranger things.
Some BIOSes will offer a choice between treating the drive as IDE or as AHCI, primarily so that you can install Windows XP from media that lacks an AHCI driver. Such users would switch to IDE, install Windows XP, download and install an AHCI driver, then switch back to AHCI. He may have a Linux kernel that can only talk to the drive in AHCI mode, which could fail if the BIOS has reset to IDE mode.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54615
Location: 56N 3W

PostPosted: Fri Jan 04, 2013 11:43 pm    Post subject: Reply with quote

elhaz.

As well as loosing all your BIOS settings, while you were changing the BIOS battery, you may have knocked the IDE cable.
Check both ends.

You mentioned 'old' and 'jumpers' Such BIOes usually have three settings for HDD, Large, LBA and another which I forget.
Choose LBA.

You HDD is not being detected, so I suspect its a cable issue.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
elhaz
n00b
n00b


Joined: 04 Jan 2013
Posts: 3

PostPosted: Sat Jan 05, 2013 1:17 am    Post subject: Reply with quote

BillWho, yeah, I guess it's something alike.
Hu, my bios have not such option.
NeddySeagoon, I checked and even changed to another cable I had in my house and still there's no changes, bios won't see my hard drive. I guess it is broken for real, but I'll check with another hard tomorrow and see what will come out.

thanks everyone!
Back to top
View user's profile Send private message
The Doctor
Moderator
Moderator


Joined: 27 Jul 2010
Posts: 2678

PostPosted: Sat Jan 05, 2013 2:08 am    Post subject: Reply with quote

Where you using any type of static protection when you changed the battery? If not, you may have damaged either the motherboard (or the hard drive?) If you have another port, you might want to test it. I certainly hope this is not the case.
_________________
First things first, but not necessarily in that order.

Apologies if I take a while to respond. I'm currently working on the dematerialization circuit for my blue box.
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana

PostPosted: Sat Jan 05, 2013 2:31 am    Post subject: Reply with quote

You may try and reset CMOS, it may be corrupted.
_________________
My Gentoo installation notes.
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum