View previous topic :: View next topic |
Author |
Message |
ormi Apprentice
Joined: 13 Oct 2002 Posts: 234 Location: lappeen Ranta, Finland
|
Posted: Wed Oct 08, 2003 4:22 pm Post subject: HP Calculator <-> Linux, how? |
|
|
I just bought a brand new HP49G+ calculator. It has an usb-cable which can be used to connect the calculator to the computer. The only problem is that there is only Windows software available on the installation/manual cd. Is it even possible to connect 49G+ to linux?
My previous calculator was TI-86 which I connected to Linux using TI's own software with Wine. |
|
Back to top |
|
|
AresTheImpaler Tux's lil' helper
Joined: 27 Feb 2003 Posts: 143
|
|
Back to top |
|
|
criis n00b
Joined: 07 Sep 2004 Posts: 49 Location: Copenhagen, Denmark
|
Posted: Sat Jan 29, 2005 10:51 am Post subject: |
|
|
Wow this is an old thread. I'll get it back to life.
I have an HP49g+ and is having problems connection it. I do:
Code: | enterprise root # modprobe usbserial vendor=0x3f0 product=0x121 |
as per a million howtos on the web. (I followed this one
dmesg tells me that the module is loaded fine, however when i plug in the calc and turn it on nothing happens. dmesg is supposed to tell that it's attached to some device.
What gives?
For reference. The last few lines from dmesg
Code: | drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 |
... /proc/bus/usb/devices says
Code: | T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-gentoo-r6 ehci_hcd
S: Product=nVidia Corporation nForce2 USB Controller
S: SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms |
Oh yeah, I'm running 2.6.10-gentoo-r6 but it didn't work when I was running 2.6.8-gentoo-r3 either.
edit: perhaps some moderator could move this to a more appropriate sub forum like 'Kernel and hardware'.
edit2: actually something is working. When I turn the calculator on I can hear a small pause in my music if I'm using xmms. Strange. |
|
Back to top |
|
|
|