| View previous topic :: View next topic |
| Author |
Message |
Bragor
n00b
Joined: 06 Mar 2013
Posts: 12
|
 Posted: Wed Mar 06, 2013 9:38 pm Post subject: X10 remote stopped working |
 |
|
A couple of days ago I upgraded from udev-171 to udev-197-r8 and hardened-sources-3.5.4 to hardened-sources-3.7.5. After that upgrade my X10 remote control stopped working. I spent several days now trying to get it working again - still not working. I see the remote with evtest and ir-keytable but I don't see any keypresses not even with cat /dev/input/event3.
dmesg:
| Code: |
[ 8.168335] usb 1-1.6: new low-speed USB device number 4 using ehci-pci
[ 8.258897] usb 1-1.6: New USB device found, idVendor=0bc7, idProduct=0006
[ 8.258908] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.258910] usb 1-1.6: Product: USB Receiver
[ 8.258911] usb 1-1.6: Manufacturer: X10 Wireless Technology Inc
[ 8.313327] Registered IR keymap rc-medion-x10-digitainer
[ 8.313398] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/rc/rc0/input3
[ 8.313446] rc0: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/rc/rc0
[ 8.313475] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input4
[ 8.313527] usbcore: registered new interface driver ati_remote
|
ir-keytable:
| Code: |
Found /sys/class/rc/rc0/ (/dev/input/event3) with:
Driver ati_remote, table rc-medion-x10-digitainer
Supported protocols: other
Enabled protocols: other
Repeat delay = 500 ms, repeat period = 125 ms
|
cat /proc/bus/input/devices:
| Code: |
I: Bus=0003 Vendor=0bc7 Product=0006 Version=0100
N: Name="X10 Wireless Technology Inc USB Receiver"
P: Phys=usb-0000:00:1a.0-1.6/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=400000010afc332 200204300000000 0 108000 180c0000801 9e168000000000 ffc
B: MSC=10
I: Bus=0003 Vendor=0bc7 Product=0006 Version=0100
N: Name="X10 Wireless Technology Inc USB Receiver mouse"
P: Phys=usb-0000:00:1a.0-1.6/input1
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input4
U: Uniq=
H: Handlers=mouse0 event4
B: PROP=0
B: EV=7
B: KEY=1b0000 0 0 0 0
B: REL=3
|
udevadm:
| Code: |
looking at device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/rc/rc0/input3/event3':
KERNEL=="event3"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/rc/rc0/input3':
KERNELS=="input3"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="X10 Wireless Technology Inc USB Receiver"
ATTRS{phys}=="usb-0000:00:1a.0-1.6/input0"
ATTRS{uniq}==""
ATTRS{properties}=="0"
looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/rc/rc0':
KERNELS=="rc0"
SUBSYSTEMS=="rc"
DRIVERS==""
ATTRS{protocols}=="[other]"
looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0':
KERNELS=="1-1.6:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="ati_remote"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="00"
ATTRS{bInterfaceProtocol}=="00"
ATTRS{bNumEndpoints}=="02"
ATTRS{supports_autosuspend}=="0"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bInterfaceNumber}=="00"
looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6':
KERNELS=="1-1.6"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{devpath}=="1.6"
ATTRS{idVendor}=="0bc7"
ATTRS{speed}=="1.5"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{busnum}=="1"
ATTRS{devnum}=="4"
ATTRS{configuration}==""
ATTRS{bMaxPower}==" 2mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="0"
ATTRS{bcdDevice}=="0100"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{version}==" 1.10"
ATTRS{urbnum}=="13"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="X10 Wireless Technology Inc"
ATTRS{removable}=="removable"
ATTRS{idProduct}=="0006"
ATTRS{bDeviceClass}=="00"
ATTRS{product}=="USB Receiver"
looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1':
KERNELS=="1-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{devpath}=="1"
ATTRS{idVendor}=="8087"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{busnum}=="1"
ATTRS{devnum}=="2"
ATTRS{configuration}==""
ATTRS{bMaxPower}==" 0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="6"
ATTRS{bcdDevice}=="0000"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="68"
ATTRS{ltm_capable}=="no"
ATTRS{removable}=="fixed"
ATTRS{idProduct}=="0024"
ATTRS{bDeviceClass}=="09"
looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1':
KERNELS=="usb1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{devpath}=="0"
ATTRS{idVendor}=="1d6b"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{authorized_default}=="1"
ATTRS{busnum}=="1"
ATTRS{devnum}=="1"
ATTRS{configuration}==""
ATTRS{bMaxPower}==" 0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="2"
ATTRS{bcdDevice}=="0308"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{serial}=="0000:00:1a.0"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="24"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Linux 3.8.0-hardened-r1 ehci_hcd"
ATTRS{removable}=="unknown"
ATTRS{idProduct}=="0002"
ATTRS{bDeviceClass}=="09"
ATTRS{product}=="EHCI Host Controller"
looking at parent device '/devices/pci0000:00/0000:00:1a.0':
KERNELS=="0000:00:1a.0"
SUBSYSTEMS=="pci"
DRIVERS=="ehci-pci"
ATTRS{irq}=="16"
ATTRS{subsystem_vendor}=="0x1462"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x0c0320"
ATTRS{companion}==""
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{dma_mask_bits}=="32"
ATTRS{local_cpus}=="f"
ATTRS{device}=="0x1e2d"
ATTRS{uframe_periodic_max}=="100"
ATTRS{enable}=="1"
ATTRS{msi_bus}==""
ATTRS{local_cpulist}=="0-3"
ATTRS{vendor}=="0x8086"
ATTRS{subsystem_device}=="0x7758"
ATTRS{d3cold_allowed}=="1"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
|
Does anybody have any idea what I could try? |
|
| Back to top |
|
 |
Hu
Administrator
Joined: 06 Mar 2007
Posts: 23093
|
| Posted: Thu Mar 07, 2013 3:12 am Post subject: |
|
|
| Is the problem reproducible with sys-kernel/vanilla-sources? |
|
| Back to top |
|
|
Bragor
n00b
Joined: 06 Mar 2013
Posts: 12
|
| Posted: Fri Mar 08, 2013 9:56 am Post subject: X10 remote stopped working |
|
|
The problem was apparently in hardened-sources 3.7.5, 3.8.0 and 3.8.0-r1. After I upgraded to hardened-sources-3.8.2 I received input in ir-keytable again. Therefore I didn't test with vanilla-sources.
I have to correct myself.
It was just coincidence that I saw some input. When I press many keys at once or in short order, sometimes a signal seems to be generated.
Apart from that, neither with hardened-sources-3.8.2 nor with vanilla-sources-3.7.10 I receive a signal in ir-keytable, evtest or cat /dev/input/event3.
Does anybody know what else I could try? |
|
| Back to top |
|
|
Hu
Administrator
Joined: 06 Mar 2007
Posts: 23093
|
| Posted: Fri Mar 08, 2013 11:45 pm Post subject: |
|
|
| If this fails in vanilla-sources, and an older version works, then file a bug report with the kernel maintainers. Be prepared to be asked to bisect this down to the specific commit that broke it. |
|
| Back to top |
|
|
lost+found
Guru
Joined: 15 Nov 2004
Posts: 509
Location: North~Sea~Coa~s~~t~~~
|
| Posted: Sat Mar 09, 2013 8:17 pm Post subject: |
|
|
Hi,
There have been some changes in menuconfig of the kernel for Multimedia support, so you'll have to reenable the modules you need.
It should probably look like this:
| Code: | Device Drivers --->
Multimedia support --->
[*] Remote Controller support
<M> Compile Remote Controller keymap modules
[*] Remote Controller devices --->
<M> ATI / X10 based USB RF remote controls |
|
|
| Back to top |
|
|
|
Kernel & Hardware
