| View previous topic :: View next topic |
| Author |
Message |
voidzero
Bodhisattva
Joined: 21 Jul 2002
Posts: 265
Location: Grnn
|
 Posted: Fri Oct 10, 2003 3:54 pm Post subject: oidentd error no-user - is networking setup correctly? |
 |
|
In short, this is my network:
adsl modem (thomson / alcatel 510) (10.0.0.138)
connects to my server which has 2 nics, (or three actually but eth0 is unused):
eth1: inet addr:10.0.0.150 Bcast:10.0.0.255 Mask:255.255.255.0
eth1:1: inet addr:80.126.113.115 Bcast:80.126.113.255 Mask:255.255.255.0
(I am unsure if this is correct because I "just tried" it.... seems to work though!)
eth2: inet addr:172.16.8.1 Bcast:172.16.255.255 Mask:255.255.0.0
In the config of that adsl modem there's the option "NAT -> Default Server". I set that to 10.0.0.150 and voila, pings were replied.
Now, when I connect to an IRC-server, there is some kind of identd-check, because I used tcpdump to check it out:
| Code: | # 17:54:tcpdump -i eth1:1 | grep auth
02.355150 calvino.freenode.net.53373 > 10.0.0.150.auth: SWE 3459068414:3459068414(0) win 5840 <mss 1460,sackOK,timestamp 107941913 0,nop,wscale 4> (DF)
17:54:02.355477 10.0.0.150.auth > calvino.freenode.net.53373: S 3474314603:3474314603(0) ack 3459068415 win 5792 <mss 1460,sackOK,timestamp 42017879 107941913,nop,wscale 0> (DF)
(.. much more here ..) |
However, there is no valid reply thus I logon 'anonymously'. My syslog shows:
| Code: | Oct 10 17:54:02 [oidentd] Connection from calvino.freenode.net (213.92.8.4):0
Oct 10 17:54:02 [oidentd] [calvino.freenode.net] 10136 , 6667 : ERROR : NO-USER |
oidentd.conf contains:
| Code: | default {
default {
allow spoof
allow spoof_all
allow spoof_privport
allow random
allow random_numeric
allow numeric
allow hide
}
} |
oidentd_masq.conf contains:
| Code: | 172.16.0.0/255.255.0.0 m00w UNIX
10.0.0.150/255.0.0.0 w00f UNIX |
Still nothing works, I'm clueless and hope one of you ppl can help me out here.
_________________
Diplomacy is the art of letting the other party have things your way.
-- Daniele Vare |
|
| Back to top |
|
 |
ikaro
Advocate
Joined: 14 Jul 2003
Posts: 2527
Location: Denmark
|
|
| Back to top |
|
|
jaska
Bodhisattva
Joined: 06 Jun 2003
Posts: 725
Location: Finland
|
| Posted: Sat Oct 11, 2003 5:31 pm Post subject: |
|
|
Make sure port 113 tcp is open on the gateway. Then make sure you run oidentd like this
Then it should answer the ident requests. |
|
| Back to top |
|
|
voidzero
Bodhisattva
Joined: 21 Jul 2002
Posts: 265
Location: Grnn
|
| Posted: Wed Oct 15, 2003 10:43 am Post subject: |
|
|
thanks ppl  I didn't really get it going, but the -e-option of oidentd is sufficient. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
