| View previous topic :: View next topic |
| Author |
Message |
Yczo
Apprentice
Joined: 09 Jul 2011
Posts: 225
|
 Posted: Tue May 14, 2013 6:25 pm Post subject: udev-200 problem after upgrade. Right Solved? |
 |
|
Hello folks, After a time of hard work, finally i decided to upgrade the distro.
After follow the wiki http://wiki.gentoo.org/wiki/Udev/upgrade, and after delete 70 y 80, on reboot , I found that the system hangs on udev, during more or less 1 minute saying 'Waiting for uevents to be processed ...'.
After look on /var/log/messages, I found that the network interface is renamed from eth0 to enp9s0, just the same problem than this guy, https://forums.gentoo.org/viewtopic-t-957608.html, but his solution doesn't work for me. I took a look over /etc/conf.d/iptables like the Admin suggested, but there isn't a reference to eth0 inside.
I have not idea what to do. Here is my rc start procedure
| Code: |
NetworkManager | default
alsasound | boot
bootmisc | boot
consolefont | boot
consolekit | default
cupsd | default
dbus | default
devfs | sysinit
dmesg | sysinit
fsck | boot
gpm | default
hostname | boot
hwclock | boot
keymaps | boot
killprocs | shutdown
laptop_mode | default
local | default
localmount | boot
modules | boot
mount-ro | shutdown
mtab | boot
net.enp9s0 | default
net.lo | boot
netmount | default
procfs | boot
root | boot
savecache | shutdown
swapfiles | boot
sysctl | boot
sysfs | sysinit
syslog-ng | default
termencoding | boot
tmpfiles.setup | boot
udev | sysinit
udev-mount | sysinit
urandom | boot
vixie-cron | default
xdm | default
|
Please some help will be appreciated
Regards, and thanks in advance.
Last edited by Yczo on Tue May 14, 2013 10:52 pm; edited 1 time in total |
|
| Back to top |
|
 |
Yczo
Apprentice
Joined: 09 Jul 2011
Posts: 225
|
| Posted: Tue May 14, 2013 10:50 pm Post subject: |
|
|
Solved, but, Is it a good solution?
Editing the file /etc/init.d/udev
ebegin "Waiting for uevents to be processed" <= Searching the sentence
udevadm settle --timeout=${udev_settle_timeout:-60} <= so easy than change 60 for 0
But Is it correct? Will bring problems?
Regards. |
|
| Back to top |
|
|
steveL
Watchman
Joined: 13 Sep 2006
Posts: 5153
Location: The Peanut Gallery
|
| Posted: Wed May 15, 2013 8:42 am Post subject: |
|
|
| Yczo wrote: | Solved, but, Is it a good solution?
Editing the file /etc/init.d/udev
ebegin "Waiting for uevents to be processed" <= Searching the sentence
udevadm settle --timeout=${udev_settle_timeout:-60} <= so easy than change 60 for 0
But Is it correct? Will bring problems?
|
No, in the first place, you should use /etc/conf.d/udev | Code: | # Expert options:
# Timeout in seconds to wait for processing of uevents at boot.
# There should be no need to change this.
#udev_settle_timeout="60" |
Secondly I'm not sure skipping this is really going to solve your problem. If it works, great.
[edited to add:]
AFAIK, if you want to keep the old reliable network names, if you've only got one eth0 and a wlan0, then check if you have a file: /etc/udev/rules.d/80-net-name-slot.rules. If not then just run: | Code: | | touch /etc/udev/rules.d/80-net-name-slot.rules |
That's assuming you're not using /etc/udev/rules.d/70-persistent-net.rules.
I'd ask in #gentoo on IRC:chat.freenode.net for more support if you're still stuck.
HTH,
steveL.
Last edited by steveL on Wed May 15, 2013 9:11 am; edited 2 times in total |
|
| Back to top |
|
|
SamuliSuominen
Retired Dev
Joined: 30 Sep 2005
Posts: 2133
Location: Finland
|
|
| Back to top |
|
|
Yczo
Apprentice
Joined: 09 Jul 2011
Posts: 225
|
| Posted: Wed May 15, 2013 9:44 am Post subject: |
|
|
Thank you very much to both.
I will work on It. Regards |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
