| View previous topic :: View next topic |
| Author |
Message |
umka69
Tux's lil' helper
Joined: 31 Mar 2013
Posts: 124
|
 Posted: Fri Feb 07, 2014 1:43 pm Post subject: wpa_supplcant: Failed to connect to non-global ctrl_ifname |
 |
|
Hi. I am useing wpa_supplicant for wireless networking.
Actually it works good when I am starting /etc/init.d/wpa_supplicant.
So I tried to follow a gentoo network manual (It is useful for KVM)
After starting a symbolic link /etc/init.d/net.wlp3s0 an error heppend.
Some help please... guys...
What I did:
| Code: | # cd /etc/init.d
# ln -s net.lo net.wlp3s0
# reboot |
Nessesery logs and configs:
| Code: | # cat /etc/conf.d/net
modules_wlp3s0="wpa_supplicant"
wpa_supplicant_wlp3s0="-Dwext"
config_wlp3s0="dhcp" |
| Code: | ~ # cat /usr/src/linux/.config | grep WEXT
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211_WEXT=y |
| Code: | ~ # cat /usr/src/linux/.config | grep ATH9K
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_MAC_DEBUG=y
CONFIG_ATH9K_LEGACY_RATE_CONTROL=y
# CONFIG_ATH9K_HTC is not set |
| Code: | ~ # dmesg | grep wlp3s0
[ 7.903664] systemd-udevd[2712]: renamed network interface wlan0 to wlp3s0
[ 13.854453] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready |
| Code: | ~ # tail -n20 /var/log/rc.log
[ ok ]
* Starting syslog-ng ...
[ ok ]
* Starting cronie ...
[ ok ]
* Bringing up interface wlp3s0
* Starting wpa_supplicant on wlp3s0 ...
Successfully initialized wpa_supplicant
[ ok ]
* Starting wpa_cli on wlp3s0 ...
Failed to connect to non-global ctrl_ifname: wlp3s0 error: No such file or directory
* start-stop-daemon: failed to start `/usr/bin/wpa_cli'
[ !! ]
* ERROR: net.wlp3s0 failed to start
* ERROR: cannot start netmount as net.wlp3s0 would not start
* Starting local
[ ok ]
rc default logging stopped at Fri Feb 7 13:37:46 2014 |
| Code: | ~ # ifconfig wlp3s0
wlp3s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 9c:b7:0d:41:63:b1 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
| Code: | ~ # /etc/init.d/net.wlp3s0 start
* Bringing up interface wlp3s0
* Starting wpa_supplicant on wlp3s0 ... [ ok ]
* Starting wpa_cli on wlp3s0 ... [ !! ] |
|
|
| Back to top |
|
 |
spike88
n00b
Joined: 16 Oct 2012
Posts: 17
|
| Posted: Mon Feb 17, 2014 11:01 pm Post subject: |
|
|
are you using Ipv6?
_________________
Gentoo Rocks thanks! |
|
| Back to top |
|
|
umka69
Tux's lil' helper
Joined: 31 Mar 2013
Posts: 124
|
| Posted: Tue Feb 18, 2014 3:08 pm Post subject: |
|
|
I actually don't even config it. Is it necessary?
There is sit0 interface.
| Code: | ~ # ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
sit0: flags=193<UP,RUNNING,NOARP> mtu 1480
inet6 ::127.0.0.1 prefixlen 96 scopeid 0x90<compat,host>
sit txqueuelen 0 (IPv6-in-IPv4)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.7 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::9eb7:dff:fe41:63b1 prefixlen 64 scopeid 0x20<link>
ether 9c:b7:0d:41:63:b1 txqueuelen 1000 (Ethernet)
RX packets 20 bytes 2046 (1.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 18 bytes 1962 (1.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
[/code]
_________________
Make a wish, this text is magic.  |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
