| View previous topic :: View next topic |
| Author |
Message |
alocacoc
n00b
Joined: 25 Aug 2012
Posts: 15
|
 Posted: Mon Oct 29, 2012 8:38 am Post subject: Problem wlan driver installation rtl8192cu |
 |
|
Dear friends,
my card is a ASUS N13 USB WIFI card. The following lsusb gives me this:
| Code: | #lsusb
Bus 001 Device 002: ID 0b05:17ab ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter (rev. B1) [Realtek RTL8192CU] |
The kernel driver itself seems to be buggy, which is confirmed by other users in other distro forums. the connection can be established and used, but its hanging somewhen after some minutes and the usb dongle needs to be replugged in to make it work again.
To solve the problem I have to install the driver from the RealTek website, which is: RTL819xC_USB_linux_v3.4.4_4749.20120806.zip
The makefile, which works for example in Ubuntu well (tested by me), isn't working in Gentoo for a reason which I don't know and the code looks very complex to me.
This is the makefile:
| Code: | EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)
EXTRA_CFLAGS += -O1
#EXTRA_CFLAGS += -O3
#EXTRA_CFLAGS += -Wall
#EXTRA_CFLAGS += -Wextra
#EXTRA_CFLAGS += -Werror
#EXTRA_CFLAGS += -pedantic
#EXTRA_CFLAGS += -Wshadow -Wpointer-arith -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes
EXTRA_CFLAGS += -Wno-unused-variable
EXTRA_CFLAGS += -Wno-unused-value
EXTRA_CFLAGS += -Wno-unused-label
EXTRA_CFLAGS += -Wno-unused-parameter
EXTRA_CFLAGS += -Wno-unused-function
EXTRA_CFLAGS += -Wno-unused
EXTRA_CFLAGS += -Wno-uninitialized
EXTRA_CFLAGS += -I$(src)/include
CONFIG_AUTOCFG_CP = n
CONFIG_RTL8192C = y
CONFIG_RTL8192D = n
CONFIG_USB_HCI = y
CONFIG_PCI_HCI = n
CONFIG_SDIO_HCI = n
CONFIG_MP_INCLUDED = n
CONFIG_POWER_SAVING = y
CONFIG_USB_AUTOSUSPEND = n
CONFIG_HW_PWRP_DETECTION = n
CONFIG_WIFI_TEST = n
CONFIG_BT_COEXISTENCE = n
CONFIG_RTL8192CU_REDEFINE_1X1 =n
CONFIG_WAKE_ON_WLAN = n
CONFIG_PLATFORM_I386_PC = y
CONFIG_PLATFORM_TI_AM3517 = n
CONFIG_PLATFORM_ANDROID_X86 = n
CONFIG_PLATFORM_ARM_S3C2K4 = n
CONFIG_PLATFORM_ARM_PXA2XX = n
CONFIG_PLATFORM_ARM_S3C6K4 = n
CONFIG_PLATFORM_MIPS_RMI = n
CONFIG_PLATFORM_RTD2880B = n
CONFIG_PLATFORM_MIPS_AR9132 = n
CONFIG_PLATFORM_RTK_DMP = n
CONFIG_PLATFORM_MIPS_PLM = n
CONFIG_PLATFORM_MSTAR389 = n
CONFIG_PLATFORM_MT53XX = n
CONFIG_PLATFORM_ARM_MX51_241H = n
CONFIG_PLATFORM_ACTIONS_ATJ227X = n
CONFIG_PLATFORM_ARM_TEGRA3 = n
CONFIG_PLATFORM_ARM_TCC8900 = n
CONFIG_PLATFORM_ARM_TCC8920 = n
CONFIG_PLATFORM_ARM_RK2818 = n
CONFIG_PLATFORM_ARM_TI_PANDA = n
CONFIG_PLATFORM_MIPS_JZ4760 = n
CONFIG_PLATFORM_DMP_PHILIPS = n
CONFIG_PLATFORM_TI_DM365 = n
CONFIG_PLATFORM_MN10300 = n
CONFIG_PLATFORM_MSTAR_TITANIA12 = n
CONFIG_DRVEXT_MODULE = n
export TopDIR ?= $(shell pwd)
ifeq ($(CONFIG_RTL8712), y)
RTL871X = rtl8712
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8712s
endif
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8712u
endif
endif
ifeq ($(CONFIG_RTL8192C), y)
RTL871X = rtl8192c
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8192cs
endif
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8192cu
FW_FILES := hal/$(RTL871X)/usb/Hal8192CUHWImg.o
ifneq ($(CONFIG_WAKE_ON_WLAN), n)
FW_FILES += hal/$(RTL871X)/usb/Hal8192CUHWImg_wowlan.o
endif
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8192ce
FW_FILES := hal/$(RTL871X)/pci/Hal8192CEHWImg.o
endif
CHIP_FILES := hal/$(RTL871X)/$(RTL871X)_sreset.o
CHIP_FILES += $(FW_FILES)
endif
ifeq ($(CONFIG_RTL8192D), y)
RTL871X = rtl8192d
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8192ds
endif
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8192du
FW_FILES := hal/$(RTL871X)/usb/Hal8192DUHWImg.o \
hal/$(RTL871X)/usb/Hal8192DUTestHWImg.o
ifneq ($(CONFIG_WAKE_ON_WLAN), n)
FW_FILES += hal/$(RTL871X)/usb/Hal8192DUHWImg_wowlan.o
endif
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8192de
FW_FILES := hal/$(RTL871X)/pci/Hal8192DEHWImg.o \
hal/$(RTL871X)/pci/Hal8192DETestHWImg.o
endif
CHIP_FILES += $(FW_FILES)
endif
ifeq ($(CONFIG_SDIO_HCI), y)
HCI_NAME = sdio
_OS_INTFS_FILES := os_dep/osdep_service.o \
os_dep/linux/os_intfs.o \
os_dep/linux/sdio_intf.o \
os_dep/linux/ioctl_linux.o \
os_dep/linux/xmit_linux.o \
os_dep/linux/mlme_linux.o \
os_dep/linux/recv_linux.o \
os_dep/linux/rtw_android.o
_HAL_INTFS_FILES := hal/$(RTL871X)/hal_init.o \
hal/$(RTL871X)/sdio_halinit.o \
hal/$(RTL871X)/sdio_ops.o \
hal/$(RTL871X)/sdio_ops_linux.o
endif
ifeq ($(CONFIG_USB_HCI), y)
HCI_NAME = usb
_OS_INTFS_FILES := os_dep/osdep_service.o \
os_dep/linux/os_intfs.o \
os_dep/linux/$(HCI_NAME)_intf.o \
os_dep/linux/ioctl_linux.o \
os_dep/linux/xmit_linux.o \
os_dep/linux/mlme_linux.o \
os_dep/linux/recv_linux.o \
os_dep/linux/ioctl_cfg80211.o \
os_dep/linux/rtw_android.o
_HAL_INTFS_FILES := hal/hal_init.o \
hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/$(RTL871X)_mp.o \
hal/$(RTL871X)/usb/usb_ops_linux.o \
hal/$(RTL871X)/usb/usb_halinit.o \
hal/$(RTL871X)/usb/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/usb/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/usb/rtl$(MODULE_NAME)_recv.o
_HAL_INTFS_FILES += $(CHIP_FILES)
endif
ifeq ($(CONFIG_PCI_HCI), y)
HCI_NAME = pci
_OS_INTFS_FILES := os_dep/osdep_service.o \
os_dep/linux/os_intfs.o \
os_dep/linux/$(HCI_NAME)_intf.o \
os_dep/linux/ioctl_linux.o \
os_dep/linux/xmit_linux.o \
os_dep/linux/mlme_linux.o \
os_dep/linux/recv_linux.o \
os_dep/linux/rtw_android.o
_HAL_INTFS_FILES := hal/hal_init.o \
hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/$(RTL871X)_mp.o \
hal/$(RTL871X)/pci/pci_ops_linux.o \
hal/$(RTL871X)/pci/pci_halinit.o \
hal/$(RTL871X)/pci/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/pci/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/pci/rtl$(MODULE_NAME)_recv.o
_HAL_INTFS_FILES += $(CHIP_FILES)
endif
ifeq ($(CONFIG_AUTOCFG_CP), y)
$(shell cp $(TopDIR)/autoconf_$(RTL871X)_$(HCI_NAME)_linux.h $(TopDIR)/include/autoconf.h)
endif
ifeq ($(CONFIG_USB_HCI), y)
ifeq ($(CONFIG_USB_AUTOSUSPEND), y)
EXTRA_CFLAGS += -DCONFIG_USB_AUTOSUSPEND
endif
endif
ifeq ($(CONFIG_POWER_SAVING), y)
EXTRA_CFLAGS += -DCONFIG_POWER_SAVING
endif
ifeq ($(CONFIG_HW_PWRP_DETECTION), y)
EXTRA_CFLAGS += -DCONFIG_HW_PWRP_DETECTION
endif
ifeq ($(CONFIG_WIFI_TEST), y)
EXTRA_CFLAGS += -DCONFIG_WIFI_TEST
endif
ifeq ($(CONFIG_BT_COEXISTENCE), y)
EXTRA_CFLAGS += -DCONFIG_BT_COEXISTENCE
endif
ifeq ($(CONFIG_RTL8192CU_REDEFINE_1X1), y)
EXTRA_CFLAGS += -DRTL8192C_RECONFIG_TO_1T1R
endif
ifeq ($(CONFIG_WAKE_ON_WLAN), y)
EXTRA_CFLAGS += -DCONFIG_WAKE_ON_WLAN
endif
ifeq ($(CONFIG_PLATFORM_I386_PC), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/)
ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
KVER := $(shell uname -r)
KSRC := /lib/modules/$(KVER)/build
MODDESTDIR := /lib/modules/$(KVER)/kernel/drivers/net/wireless/
INSTALL_PREFIX :=
endif
ifeq ($(CONFIG_PLATFORM_TI_AM3517), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_SHUTTLE
CROSS_COMPILE := arm-eabi-
KSRC := $(shell pwd)/../../../Android/kernel
ARCH := arm
endif
ifeq ($(CONFIG_PLATFORM_MSTAR_TITANIA12), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR_TITANIA12
ARCH:=mips
CROSS_COMPILE:= /work/mstar/mips-4.3/bin/mips-linux-gnu-
KVER:= 2.6.28.9
KSRC:= /work/mstar/2.6.28.9/
endif
ifeq ($(CONFIG_PLATFORM_ANDROID_X86), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/)
ARCH := $(SUBARCH)
CROSS_COMPILE := /media/DATA-2/android-x86/ics-x86_20120130/prebuilt/linux-x86/toolchain/i686-unknown-linux-gnu-4.2.1/bin/i686-unknown-linux-gnu-
KSRC := /media/DATA-2/android-x86/ics-x86_20120130/out/target/product/generic_x86/obj/kernel
MODULE_NAME :=wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_PXA2XX), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH := arm
CROSS_COMPILE := arm-none-linux-gnueabi-
KVER := 2.6.34.1
KSRC ?= /usr/src/linux-2.6.34.1
endif
ifeq ($(CONFIG_PLATFORM_ARM_S3C2K4), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH := arm
CROSS_COMPILE := arm-linux-
KVER := 2.6.24.7_$(ARCH)
KSRC := /usr/src/kernels/linux-$(KVER)
endif
ifeq ($(CONFIG_PLATFORM_ARM_S3C6K4), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH := arm
CROSS_COMPILE := arm-none-linux-gnueabi-
KVER := 2.6.34.1
KSRC ?= /usr/src/linux-2.6.34.1
endif
ifeq ($(CONFIG_PLATFORM_RTD2880B), y)
EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN -DCONFIG_PLATFORM_RTD2880B
ARCH:=
CROSS_COMPILE:=
KVER:=
KSRC:=
endif
ifeq ($(CONFIG_PLATFORM_MIPS_RMI), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH:=mips
CROSS_COMPILE:=mipsisa32r2-uclibc-
KVER:=
KSRC:= /root/work/kernel_realtek
endif
ifeq ($(CONFIG_PLATFORM_MIPS_PLM), y)
EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN
ARCH:=mips
CROSS_COMPILE:=mipsisa32r2-uclibc-
KVER:=
KSRC:= /root/work/kernel_realtek
endif
ifeq ($(CONFIG_PLATFORM_MSTAR389), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR389
ARCH:=mips
CROSS_COMPILE:= mips-linux-gnu-
KVER:= 2.6.28.10
KSRC:= /home/mstar/mstar_linux/2.6.28.9/
endif
ifeq ($(CONFIG_PLATFORM_MIPS_AR9132), y)
EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN
ARCH := mips
CROSS_COMPILE := mips-openwrt-linux-
KSRC := /home/alex/test_openwrt/tmp/linux-2.6.30.9
endif
ifeq ($(CONFIG_PLATFORM_DMP_PHILIPS), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DRTK_DMP_PLATFORM
ARCH := mips
#CROSS_COMPILE:=/usr/local/msdk-4.3.6-mips-EL-2.6.12.6-0.9.30.3/bin/mipsel-linux-
CROSS_COMPILE:=/usr/local/toolchain_mipsel/bin/mipsel-linux-
KSRC ?=/usr/local/Jupiter/linux-2.6.12
endif
ifeq ($(CONFIG_PLATFORM_RTK_DMP), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DRTK_DMP_PLATFORM
ARCH:=mips
CROSS_COMPILE:=mipsel-linux-
KVER:=
KSRC ?= /usr/src/work/DMP_Kernel/jupiter/linux-2.6.12
endif
ifeq ($(CONFIG_PLATFORM_MT53XX), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MT53XX
ARCH:= arm
CROSS_COMPILE:= arm11_mtk_le-
KVER:= 2.6.27
KSRC?= /proj/mtk00802/BD_Compare/BDP/Dev/BDP_V301/BDP_Linux/linux-2.6.27
endif
ifeq ($(CONFIG_PLATFORM_ARM_MX51_241H), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_WISTRON_PLATFORM
ARCH := arm
CROSS_COMPILE := /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-
KVER := 2.6.31
KSRC ?= /lib/modules/2.6.31-770-g0e46b52/source
endif
ifeq ($(CONFIG_PLATFORM_ACTIONS_ATJ227X), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ACTIONS_ATJ227X
ARCH := mips
CROSS_COMPILE := /home/cnsd4/project/actions/tools-2.6.27/bin/mipsel-linux-gnu-
KVER := 2.6.27
KSRC := /home/cnsd4/project/actions/linux-2.6.27.28
endif
ifeq ($(CONFIG_PLATFORM_TI_DM365), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_TI_DM365
ARCH := arm
CROSS_COMPILE := /home/cnsd4/Appro/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le/bin/arm_v5t_le-
KVER := 2.6.18
KSRC := /home/cnsd4/Appro/mv_pro_5.0/montavista/pro/devkit/lsp/ti-davinci/linux-dm365
endif
ifeq ($(CONFIG_PLATFORM_ARM_TEGRA3), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN #-DCONFIG_MINIMAL_MEMORY_USAGE
ARCH ?= arm
CROSS_COMPILE ?= /media/DATA-1/nvidia/gingerbread/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
KSRC ?= /media/DATA-1/nvidia/gingerbread/out/debug/target/product/cardhu/obj/KERNEL
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_TCC8900), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_MINIMAL_MEMORY_USAGE
ARCH ?= arm
CROSS_COMPILE ?= /media/DATA-1/telechips/SDK_2302_20110425/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
KSRC ?=/media/DATA-1/telechips/SDK_2302_20110425/kernel
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_TCC8920), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN #-DCONFIG_MINIMAL_MEMORY_USAGE
ARCH := arm
CROSS_COMPILE := /media/DATA-2/telechips/ics_sdk/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
KSRC := /media/DATA-2/telechips/ics_sdk/kernel
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_RK2818), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_ROCKCHIPS -DCONFIG_MINIMAL_MEMORY_USAGE
ARCH := arm
CROSS_COMPILE := /usr/src/release_fae_version/toolchain/arm-eabi-4.4.0/bin/arm-eabi-
KSRC := /usr/src/release_fae_version/kernel25_A7_281x
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_TI_PANDA), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN #-DCONFIG_MINIMAL_MEMORY_USAGE
ARCH := arm
#CROSS_COMPILE := /media/DATA-1/aosp/ics-aosp_20111227/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
#KSRC := /media/DATA-1/aosp/android-omap-panda-3.0_20120104
CROSS_COMPILE := /media/DATA-1/android-4.0/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
KSRC := /media/DATA-1/android-4.0/panda_kernel/omap
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_MIPS_JZ4760), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_MINIMAL_MEMORY_USAGE
ARCH ?= mips
CROSS_COMPILE ?= /mnt/sdb5/Ingenic/Umido/mips-4.3/bin/mips-linux-gnu-
KSRC ?= /mnt/sdb5/Ingenic/Umido/kernel
endif
#Add setting for MN10300
ifeq ($(CONFIG_PLATFORM_MN10300), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MN10300
ARCH := mn10300
CROSS_COMPILE := mn10300-linux-
KVER := 2.6.32.2
KSRC := /home/winuser/work/Plat_sLD2T_V3010/usr/src/linux-2.6.32.2
INSTALL_PREFIX :=
endif
ifeq ($(CONFIG_MP_INCLUDED), y)
MODULE_NAME := $(MODULE_NAME)_mp
EXTRA_CFLAGS += -DCONFIG_MP_INCLUDED
endif
ifneq ($(KERNELRELEASE),)
rtk_core := core/rtw_cmd.o \
core/rtw_security.o \
core/rtw_debug.o \
core/rtw_io.o \
core/rtw_ioctl_query.o \
core/rtw_ioctl_set.o \
core/rtw_ieee80211.o \
core/rtw_mlme.o \
core/rtw_mlme_ext.o \
core/rtw_wlan_util.o \
core/rtw_pwrctrl.o \
core/rtw_rf.o \
core/rtw_recv.o \
core/rtw_sta_mgt.o \
core/rtw_xmit.o \
core/rtw_p2p.o \
core/rtw_br_ext.o \
core/rtw_iol.o
$(MODULE_NAME)-y += $(rtk_core)
$(MODULE_NAME)-y += core/efuse/rtw_efuse.o
$(MODULE_NAME)-y += $(_HAL_INTFS_FILES)
$(MODULE_NAME)-y += $(_OS_INTFS_FILES)
$(MODULE_NAME)-$(CONFIG_MP_INCLUDED) += core/rtw_mp.o \
core/rtw_mp_ioctl.o \
core/rtw_ioctl_rtl.o
obj-$(CONFIG_RTL8192CU) := $(MODULE_NAME).o
else
export CONFIG_RTL8192CU = m
all: modules
modules:
$(MAKE) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) -C $(KSRC) M=$(shell pwd) modules
strip:
$(CROSS_COMPILE)strip $(MODULE_NAME).ko --strip-unneeded
install:
install -p -m 644 $(MODULE_NAME).ko $(MODDESTDIR)
/sbin/depmod -a ${KVER}
uninstall:
rm -f $(MODDESTDIR)/$(MODULE_NAME).ko
/sbin/depmod -a ${KVER}
config_r:
@echo "make config"
/bin/bash script/Configure script/config.in
.PHONY: modules clean
clean:
rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
rm .tmp_versions -fr ; rm Module.symvers -fr
rm -fr Module.markers ; rm -fr modules.order
cd core/efuse ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd core ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd hal/$(RTL871X)/$(HCI_NAME) ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd hal/$(RTL871X) ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd hal ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep/linux ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
endif |
This is the error I get when I use #make
| Code: | make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/3.5.0-gentoo/build M=/home/name/Downloads/RTL modules
make[1]: Entering directory `/usr/src/linux-3.5.0-gentoo'
Makefile:323: /usr/src/linux-3.5.0-gentoo/scripts/Kbuild.include: No such file or directory
Makefile:564: /usr/src/linux-3.5.0-gentoo/arch/x86/Makefile: No such file or directory
/bin/sh: /usr/src/linux-3.5.0-gentoo/scripts/gcc-goto.sh: No such file or directory
make[1]: *** No rule to make target `/usr/src/linux-3.5.0-gentoo/arch/x86/Makefile'. Stop.
make[1]: Leaving directory `/usr/src/linux-3.5.0-gentoo'
make: *** [modules] Error 2 |
The driver directory includes many *.c files which I am surely not supposed to touch in the subdirectories: core, hal, include and os_dep. There are also files clean, ifcfg-wlan0, Kconfig wlan0dhcp and the makefile which I tried to execute.
I backlisted the kernel driver rtl8192cu. The new driver is supposed to be called 8192cu without the rtl.
Please help me to install the new driver so I can properly use my wlan card.
Thank you.
Last edited by alocacoc on Mon Oct 29, 2012 2:24 pm; edited 1 time in total |
|
| Back to top |
|
 |
alocacoc
n00b
Joined: 25 Aug 2012
Posts: 15
|
| Posted: Mon Oct 29, 2012 11:36 am Post subject: |
|
|
If I use the command:
It will show the following message:
| Code: | install -p -m 644 8192cu.ko /lib/modules/3.5.0-gentoo/kernel/drivers/net/wireless/
install: cannot stat ‘8192cu.ko’: No such file or directory
make: *** [install] Error 1 |
The directory /lib/modules/3.5.0-gentoo/kernel/drivers/net/wireless/ exists.
Under /lib/modules/3.5.0-gentoo/kernel/drivers/net/wireless/rtlwifi/rtl8192cu/ is a file rtl8192cu.ko
Maybe this helps.
Last edited by alocacoc on Mon Oct 29, 2012 2:24 pm; edited 1 time in total |
|
| Back to top |
|
|
alocacoc
n00b
Joined: 25 Aug 2012
Posts: 15
|
| Posted: Mon Oct 29, 2012 1:04 pm Post subject: |
|
|
I updated the kernel to 3.6.0, hope the kernel driver will work better.
Is after a kernel update the new driver automatically used? |
|
| Back to top |
|
|
alocacoc
n00b
Joined: 25 Aug 2012
Posts: 15
|
| Posted: Mon Oct 29, 2012 3:53 pm Post subject: |
|
|
| Unfortunately the kernel update did not change the problem. |
|
| Back to top |
|
|
khayyam
Watchman
Joined: 07 Jun 2012
Posts: 6227
Location: Room 101
|
| Posted: Mon Oct 29, 2012 4:47 pm Post subject: Re: Problem wlan driver installation rtl8192cu |
|
|
| alocacoc wrote: | | Code: | KVER := $(shell uname -r)
KSRC := /lib/modules/$(KVER)/build |
This is the error I get when I use #make
| Code: | make[1]: Entering directory `/usr/src/linux-3.5.0-gentoo'
Makefile:323: /usr/src/linux-3.5.0-gentoo/scripts/Kbuild.include: No such file or directory
Makefile:564: /usr/src/linux-3.5.0-gentoo/arch/x86/Makefile: No such file or directory
/bin/sh: /usr/src/linux-3.5.0-gentoo/scripts/gcc-goto.sh: No such file or directory
make[1]: *** No rule to make target `/usr/src/linux-3.5.0-gentoo/arch/x86/Makefile'. Stop.
make[1]: Leaving directory `/usr/src/linux-3.5.0-gentoo'
make: *** [modules] Error 2 |
|
alocacoc ... here is the source of the problem. You must be booted the target kernel (and so match 'uname -r') when compiling the module, and /lib/modules/$(KVER)/build must exist and point to the kernel sources (build -> /usr/src/linux-${KVER}). So, first 'make && make modules_install' for the target kernel, then install the kernel and boot it. You should then be able to compile the rtl8192cu module.
best ... khay |
|
| Back to top |
|
|
alocacoc
n00b
Joined: 25 Aug 2012
Posts: 15
|
| Posted: Tue Oct 30, 2012 3:09 pm Post subject: |
|
|
#uname -r
gives me:
3.6.0-gentoo
This kernel is booted now.
The directory /lib/modules/3.6.0-gentoo/build exists, it contains a makefile, Module.symvers, system.map, config and a directory called include.
The directory /usr/src/3.6.0-gentoo/ got quite the same files.
So it means my compiled kernel is 3.6.0 and I have also booted this kernel 3.6.0.
Isn't my target kernel always the booted kernel?
With 'make &&make modules install' I will compile my kernel again, right?
How to link /lib/modules/3.6.0-gentoo/build to /usr/src/3.6.0-gentoo/?
Like this? 'ln -s /lib/modules/3.6.0-gentoo/build /usr/src/3.6.0-gentoo/'
Thank you for your help. |
|
| Back to top |
|
|
khayyam
Watchman
Joined: 07 Jun 2012
Posts: 6227
Location: Room 101
|
| Posted: Tue Oct 30, 2012 3:36 pm Post subject: |
|
|
| alocacoc wrote: | | The directory /lib/modules/3.6.0-gentoo/build exists, it contains a makefile, Module.symvers, system.map, config and a directory called include. |
alocacoc ... this will be a symlink to the kernel sources, its created when running 'make modules_install'.
| alocacoc wrote: | | The directory /usr/src/3.6.0-gentoo/ got quite the same files. |
This is incorrect ... the directory will/should be named '/usr/src/linux-3.6.0-gentoo/', I'm not sure why you have the above, or if its a typo on your part, but gentoo-sources should be installed as linux-{version}-gentoo.
| alocacoc wrote: | | With 'make &&make modules install' I will compile my kernel again, right? |
yes and no ... with the above (typo's) you'll just get an error as "space" is a specical character and the command is "&& make modules_install" not "make modules install". But, otherwise, yes the above will compile the kernel and install the modules.
| alocacoc wrote: | | How to link /lib/modules/3.6.0-gentoo/build to /usr/src/3.6.0-gentoo/? Like this? 'ln -s /lib/modules/3.6.0-gentoo/build /usr/src/3.6.0-gentoo/' |
No, firstly the link is created when 'make modules_install" is run, so there is no need to link, secondly the path is incorrect, thirdly, 'ln -s /from /to' and you have it visa-versa, and fourthly, to change a symlink the '-f' switch should be used.
best ... khay |
|
| Back to top |
|
|
alocacoc
n00b
Joined: 25 Aug 2012
Posts: 15
|
| Posted: Wed Oct 31, 2012 7:12 am Post subject: |
|
|
You are 100% right, the directory is call /usr/src/linux-3.6.0-gentoo/, my typing mistake.
When I do in /lib/modules/3.6.0-gentoo/build
| Code: | | # make modules_install |
I get this error:
| Code: | Makefile:323: /usr/src/linux-3.6.0-gentoo/scripts/Kbuild.include: No such file or directory
Makefile:564: /usr/src/linux-3.6.0-gentoo/arch/x86/Makefile: No such file or directory
/bin/sh: /usr/src/linux-3.6.0-gentoo/scripts/gcc-goto.sh: No such file or directory
make: *** No rule to make target `/usr/src/linux-3.6.0-gentoo/arch/x86/Makefile'. Stop. |
It is quite the same error like when I try to make the wlan driver module, so I am doing something wrong in general here, nothing to do with the driver module itself I think.
The correct command would be 'ln -f /usr/src/linux-3.6.0-gentoo /lib/modules/3.6.0-gentoo/build', but I don't need it.
Thanks for your help. |
|
| Back to top |
|
|
khayyam
Watchman
Joined: 07 Jun 2012
Posts: 6227
Location: Room 101
|
| Posted: Wed Oct 31, 2012 1:21 pm Post subject: |
|
|
| alocacoc wrote: | | When I do in /lib/modules/3.6.0-gentoo/build |
alocacoc ... ignore /lib/modules/3.6.0-gentoo/build its just a symlink to /usr/src/linux-{version}-gentoo ... its there meerly to point a build at the sources for those modules.
| alocacoc wrote: | | Code: | | # make modules_install |
I get this error:
| Code: | Makefile:323: /usr/src/linux-3.6.0-gentoo/scripts/Kbuild.include: No such file or directory
Makefile:564: /usr/src/linux-3.6.0-gentoo/arch/x86/Makefile: No such file or directory
/bin/sh: /usr/src/linux-3.6.0-gentoo/scripts/gcc-goto.sh: No such file or directory
make: *** No rule to make target `/usr/src/linux-3.6.0-gentoo/arch/x86/Makefile'. Stop. |
|
Is this perhaps a VM? ... anyhow, the package isn't installed correctly as some files from that package are missing.
| Code: | # equery belongs /usr/src/linux-3.6.4-geek/scripts/Kbuild.include
* Searching for /usr/src/linux-3.6.4-geek/scripts/Kbuild.include ...
sys-kernel/geek-sources-3.6.4 (/usr/src/linux-3.6.4-geek/scripts/Kbuild.include) |
| alocacoc wrote: | | The correct command would be 'ln -f /usr/src/linux-3.6.0-gentoo /lib/modules/3.6.0-gentoo/build', but I don't need it. |
carefull ... that would get you a hard link and not a symbolic link ... "ln -sf"
| alocacoc wrote: | | Thanks for your help. |
your welcome & best ... khay |
|
| Back to top |
|
|
alocacoc
n00b
Joined: 25 Aug 2012
Posts: 15
|
| Posted: Mon Nov 05, 2012 4:43 pm Post subject: |
|
|
Something was wrong with the sources. I reinstalled the 3.6.0 sources. Then I created the correct symbolic link to this source directory and installed the module with 'make modules' and 'make modules install'. Everything went correctly I guess. The module seems to be installed. I blacklisted the other driver rtl8192cu.
Now in KDE I see in the systray under WLAN Interfaces 'driver: rtl8192cu'. I am not sure how to see if my new driver is now actually working.
This are some commands where I'm not sure how to see if my module is now used by my wlan card.
| Code: | # lsmod | grep 8192
8192cu 514313 0
|
| Code: |
# grep 8192 /usr/src/linux/.config
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8192CU=m
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8192U=m
CONFIG_RTL8192E=m |
| Code: | # systool -v -m 8192cu
Module = "8192cu"
Attributes:
coresize = "514313"
initsize = "0"
initstate = "live"
refcnt = "0"
srcversion = "66BBB40DB96A36E5822F922"
taint = "O"
uevent = <store method only>
version = "v3.4.4_xxxx.20120730"
Parameters:
ifname = "wlan%d"
rtw_ampdu_amsdu = "0"
rtw_ampdu_enable = "1"
rtw_antdiv_cfg = "2"
rtw_busy_thresh = "40"
rtw_cbw40_enable = "1"
rtw_channel_plan = "65"
rtw_channel = "1"
rtw_chip_version = "0"
rtw_enusbss = "0"
rtw_force_iol = "N"
rtw_ht_enable = "1"
rtw_hwpdn_mode = "2"
rtw_hwpwrp_detect = "0"
rtw_initmac = "(null)"
rtw_intel_class_mode= "0"
rtw_ips_mode = "0"
rtw_lbkmode = "0"
rtw_low_power = "0"
rtw_lowrate_two_xmit= "1"
rtw_max_roaming_times= "2"
rtw_mc2u_disable = "0"
rtw_mp_mode = "0"
rtw_network_mode = "0"
rtw_power_mgnt = "1"
rtw_rf_config = "5"
rtw_rfintfs = "2"
rtw_rx_stbc = "1"
rtw_vcs_type = "1"
rtw_vrtl_carrier_sense= "2"
rtw_wifi_spec = "0"
rtw_wmm_enable = "1"
Sections:
.bss = "0xffffffffa071d300"
.data = "0xffffffffa0706540"
.exit.text = "0xffffffffa06fa730"
.gnu.linkonce.this_module= "0xffffffffa071d0e0"
.init.text = "0xffffffffa072e000"
.note.gnu.build-id = "0xffffffffa06fa770"
.rodata = "0xffffffffa06fa7a0"
.rodata.str1.1 = "0xffffffffa06fe9e5"
.rodata.str1.8 = "0xffffffffa07012e0"
.smp_locks = "0xffffffffa07060a0"
.strtab = "0xffffffffa0738578"
.symtab = "0xffffffffa072e060"
.text = "0xffffffffa06af000"
__param = "0xffffffffa0706138"
|
| Code: | # modinfo 8192cu
filename: /lib/modules/3.6.0-gentoo/kernel/drivers/net/wireless/8192cu.ko
version: v3.4.4_xxxx.20120730
author: Realtek Semiconductor Corp.
description: Realtek Wireless Lan Driver
license: GPL
srcversion: 66BBB40DB96A36E5822F922
alias: usb:v0BDAp8186d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0E66p0019d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0846p9021d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B05p17ABd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p0061d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v20F4p624Dd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp2103d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp2102d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3307d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v4855p0091d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07AAp0056d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07B8p8178d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB2Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v7392p7822d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0586p341Fd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3309d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p330Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3307d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019p1201d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFFCd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFFBd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFF8d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFFAd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFF9d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFF7d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13D3p3358d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13D3p3359d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp317Fd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB2Ed*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019p4902d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v4856p0091d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp5088d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p005Cd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13D3p3357d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v4855p0090d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v20F4p648Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB2Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp1102d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3308d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v103Cp1629d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v06F8pE033d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0EB0p9071d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07B8p8189d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v7392p7811d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p0052d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pED17d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Cd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8178d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8177d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp018Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp818Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Fd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8754d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Dd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Ed*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8170d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8176d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8191d*dc*dsc*dp*ic*isc*ip*in*
depends:
vermagic: 3.6.0-gentoo SMP mod_unload modversions
parm: rtw_ips_mode:The default IPS mode (int)
parm: ifname:charp
parm: rtw_initmac:charp
parm: rtw_channel_plan:int
parm: rtw_chip_version:int
parm: rtw_rfintfs:int
parm: rtw_lbkmode:int
parm: rtw_network_mode:int
parm: rtw_channel:int
parm: rtw_mp_mode:int
parm: rtw_wmm_enable:int
parm: rtw_vrtl_carrier_sense:int
parm: rtw_vcs_type:int
parm: rtw_busy_thresh:int
parm: rtw_ht_enable:int
parm: rtw_cbw40_enable:int
parm: rtw_ampdu_enable:int
parm: rtw_rx_stbc:int
parm: rtw_ampdu_amsdu:int
parm: rtw_lowrate_two_xmit:int
parm: rtw_rf_config:int
parm: rtw_power_mgnt:int
parm: rtw_low_power:int
parm: rtw_wifi_spec:int
parm: rtw_antdiv_cfg:int
parm: rtw_enusbss:int
parm: rtw_hwpdn_mode:int
parm: rtw_hwpwrp_detect:int
parm: rtw_max_roaming_times:The max roaming times to try (uint)
parm: rtw_force_iol:Force to enable IOL (bool)
parm: rtw_intel_class_mode:The intel class mode [0: off, 1: on] (uint)
parm: rtw_mc2u_disable:int
|
|
|
| Back to top |
|
|
khayyam
Watchman
Joined: 07 Jun 2012
Posts: 6227
Location: Room 101
|
| Posted: Mon Nov 05, 2012 5:17 pm Post subject: |
|
|
| alocacoc wrote: | | I'm not sure how to see if my module is now used by my wlan card. |
alocacoc ...
| Code: | | # awk '{RS="\n\n"}/Realtek/' <(lspci -k) |
The final line should read "Kernel driver in use:" ... but your best bet is to try and connect to an AP.
best ... khay |
|
| Back to top |
|
|
alocacoc
n00b
Joined: 25 Aug 2012
Posts: 15
|
| Posted: Tue Nov 06, 2012 9:02 am Post subject: |
|
|
if I use
It is showing me the kernel driver for devices like my eth0, but not for my usb devices. lsusb doesn't have the -k feature. How to see? |
|
| Back to top |
|
|
khayyam
Watchman
Joined: 07 Jun 2012
Posts: 6227
Location: Room 101
|
| Posted: Tue Nov 06, 2012 3:20 pm Post subject: |
|
|
| alocacoc wrote: | | if I use lspci -k it is showing me the kernel driver for devices like my eth0, but not for my usb devices. lsusb doesn't have the -k feature. How to see? |
alocacoc ... yes, sorry, I'd completely missed it was a USB device. The device registration should appear in /var/log/messages. However, if the device/driver is detected then you should see the network interface in iwconfig/ifconfig/iw.
best ... khay |
|
| Back to top |
|
|
waterloo2005
Apprentice
Joined: 26 Aug 2008
Posts: 271
|
| Posted: Mon Dec 17, 2012 2:49 pm Post subject: |
|
|
The newest driver 8192cu from realtex site only support Linux Kernel 2.6.18~2.6.38 and Kernel 3.0.8 .
_________________
i5-2450M, gnome, amd64
R,Mathematica,Emacs |
|
| Back to top |
|
|
waterloo2005
Apprentice
Joined: 26 Aug 2008
Posts: 271
|
| Posted: Sat Feb 02, 2013 6:41 am Post subject: |
|
|
I meet the same problem in kernel gentoo-sources 3.6.11 .
Now how to do with it ?
Thanks
_________________
i5-2450M, gnome, amd64
R,Mathematica,Emacs |
|
| Back to top |
|
|
Poincare
n00b
Joined: 25 Feb 2006
Posts: 30
Location: This crappy AMD laptop...
|
| Posted: Thu Jul 03, 2014 11:57 pm Post subject: |
|
|
I also experience the compile problem. I am on kernel version 3.15.0.
Can anyone help to make the 8192cu driver? The one supplied by the kernel (module) is broken and repeatedly becomes unusable.  |
|
| Back to top |
|
|
donald3.heckel
Tux's lil' helper
Joined: 24 Apr 2013
Posts: 88
|
| Posted: Wed Jul 16, 2014 4:27 pm Post subject: Reply |
|
|
Hello,
I see that you are having difficulty.
If all else fails, try ndiswrapper if necessary.
ndiswrapper uses windows xp .inf files to install windows drivers.
Here are the instructions: https://wiki.archlinux.org/index.php/Wireless_network_configuration#ndiswrapper
Ndiswrapper is available through portage.
run
then download the windows driver for your hardware at realtek's website.
| Code: |
mkdir realtek_windows-driver
mv longrealtekfilename.zip realtek_windows-driver
unzip longrealtekfilename.zip
cd longrealtekfoldername
cd RTWLANE_Driver
cd WinXP
ndiswrapper -i netrtwlane.inf
ndiswrapper -m
ndiswrapper -mi
ndiswrapper -l
(Outputs installed driver)
modprobe ndiswrapper
(if loaded successfully proceed below)
nano /etc/conf.d/modules
=====>modules="ndiswrapper"
reboot
|
Once the above processes have been completed,
you can reboot your system and your wireless internet connection should be working.
I hope this works for you.
Sincerely,
donald3.heckel
_________________
Believing is seeing. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
