| View previous topic :: View next topic |
| Author |
Message |
umka69
Tux's lil' helper
Joined: 31 Mar 2013
Posts: 124
|
 Posted: Tue Feb 11, 2014 6:09 am Post subject: wpa_supplcant: Failed to connect to non-global ctrl_ifname |
 |
|
Всем привет.
Проблема с беспроводным интерфейсом.
Вообще /etc/init.d/wpa_supplicant стартует и работает.
Но хотелось бы сделать все по рукокниге gentoo network manual
И после того как создал и запустил симлинк /etc/init.d/net.wlp3s0 выдало ошибку.
Помогите!
Что я сделал.
| Code: | # cd /etc/init.d
# ln -s net.lo net.wlp3s0
# rc-update add net.wlp3s0 default
# reboot |
Логи и конфиги
| Code: | # cat /etc/conf.d/net
modules_wlp3s0="wpa_supplicant"
wpa_supplicant_wlp3s0="-Dwext"
config_wlp3s0="dhcp" |
| Code: | ~ # cat /usr/src/linux/.config | grep WEXT
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211_WEXT=y |
| Code: | ~ # cat /usr/src/linux/.config | grep ATH9K
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_MAC_DEBUG=y
CONFIG_ATH9K_LEGACY_RATE_CONTROL=y
# CONFIG_ATH9K_HTC is not set |
| Code: | ~ # dmesg | grep wlp3s0
[ 7.903664] systemd-udevd[2712]: renamed network interface wlan0 to wlp3s0
[ 13.854453] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready |
| Code: | ~ # tail -n20 /var/log/rc.log
[ ok ]
* Starting syslog-ng ...
[ ok ]
* Starting cronie ...
[ ok ]
* Bringing up interface wlp3s0
* Starting wpa_supplicant on wlp3s0 ...
Successfully initialized wpa_supplicant
[ ok ]
* Starting wpa_cli on wlp3s0 ...
Failed to connect to non-global ctrl_ifname: wlp3s0 error: No such file or directory
* start-stop-daemon: failed to start `/usr/bin/wpa_cli'
[ !! ]
* ERROR: net.wlp3s0 failed to start
* ERROR: cannot start netmount as net.wlp3s0 would not start
* Starting local
[ ok ]
rc default logging stopped at Fri Feb 7 13:37:46 2014 |
| Code: | ~ # ifconfig wlp3s0
wlp3s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 9c:b7:0d:41:63:b1 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
| Code: | ~ # /etc/init.d/net.wlp3s0 start
* Bringing up interface wlp3s0
* Starting wpa_supplicant on wlp3s0 ... [ ok ]
* Starting wpa_cli on wlp3s0 ... [ !! ] |
_________________
Make a wish, this text is magic.  |
|
| Back to top |
|
 |
nevejda
n00b
Joined: 21 Mar 2014
Posts: 5
Location: Украина
|
| Posted: Fri Mar 21, 2014 8:32 pm Post subject: |
|
|
| покажи настройки /etc/wpa_supplicant/wpa_supplicant.conf |
|
| Back to top |
|
|
|
Russian
