Troubleshooting cfg-update..

wrc1944 · Posted: Mon Oct 13, 2003 7:04 pm Post subject:

I emerged xxdiff + its dep, and then followed your directions precisely, chmod 755 and all. When I try to run cfg-update, as you instructed, I get a "command not found."

Where have I gone wrong- I'd really like to try this!

Just went back to check again one more time, as user, and root, and here's what I got:

wrc@mymachine wrc $ cfg-update
/usr/local/bin/cfg-update: line 3: =: command not found
/usr/local/bin/cfg-update: line 10: =: command not found
/usr/local/bin/cfg-update: line 17: =: command not found
/usr/local/bin/cfg-update: line 21: sub: command not found
/usr/local/bin/cfg-update: line 22: : command not found
/usr/local/bin/cfg-update: line 23: : command not found
/usr/local/bin/cfg-update: line 24: : command not found
/usr/local/bin/cfg-update: line 25: : command not found
/usr/local/bin/cfg-update: line 26: : command not found
/usr/local/bin/cfg-update: line 27: : command not found
/usr/local/bin/cfg-update: line 28: : command not found
/usr/local/bin/cfg-update: line 29: : command not found
/usr/local/bin/cfg-update: line 30: : command not found
/usr/local/bin/cfg-update: line 31: : command not found
/usr/local/bin/cfg-update: line 32: : command not found
/usr/local/bin/cfg-update: line 33: : command not found
/usr/local/bin/cfg-update: line 34: : command not found
/usr/local/bin/cfg-update: line 35: : command not found
/usr/local/bin/cfg-update: line 36: : command not found
/usr/local/bin/cfg-update: line 37: : command not found
/usr/local/bin/cfg-update: line 38: : command not found
/usr/local/bin/cfg-update: line 39: syntax error near unexpected token `}'
/usr/local/bin/cfg-update: line 39: ` } '

wrc@mymachine wrc $ su
Password:
root@mymachine wrc # cfg-update
bash: cfg-update: command not found
root@mymachine wrc #

I copy/pasted the file as posted in the forum- could there be an error?

Thanks,
wrc1944
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

wrc1944 · Posted: Mon Oct 13, 2003 8:26 pm Post subject:

OK- made some progress. I had saved the file in kwrite, and it was just a text file. When I saved it in kedit, it became a perl file, so I replaced it in /usr/local/bin.

I then had to use the command as root "perl cfg-update" instead of just "cfg-update" to get it to output the options -c and -p. Haven't had a chance to try it, but will on my next opportunity.Am I correct in thinking you have to have some ._cfg???? files to have the gui appear?

I think it's set up OK now, but I'm still not really sure. At least it appears that some functionality is there- but still no gui appears. I'd still like to know what to expect with the gui- could someone post a screenshot- that would be great?

Thanks,
wrc1944
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

xentric · Guru Joined: 16 Mar 2003 Posts: 410 Location: Netherlands

******************************************************************************

NOTE TO ALL CFG-UPDATE USERS:

After 5 years I'm finally looking for someone capable of fully adopting cfg-update as I do not have the time to properly support it anymore. I will fix all remaining bugs in week 31 and write some documentation to enable someone else to continue developing it further...
By the way, all those years I have wondered how many people are actually using cfg-update. I still have no clue!

I would really, really, really appreciate it if all you guys out there would just send a shout to xentric@zeelandnet.nl with your name or nickname and your location, just for the fun of it and to get an idea what the minimal size of the userbase is.

Drop me an e-mail on the same address if you're interested in adopting cfg-update.

Regards,

Stephan van Boven

For more details see: app-portage/cfgupdate - installation instructions

[11-JUL-2008]
******************************************************************************

wrc1944 · Posted: Tue Oct 14, 2003 4:35 am Post subject:

Thanks xentric,

I did as you instructed, and here is the output. I guess I still don't get it. Where is the GUI? All I get is command line options. Do I need to edit the script somehow?

wrc1944

wrc@mymachine wrc $ su
Password:
root@mymachine wrc # cfg-update -i
bash: cfg-update: command not found
root@mymachine wrc # perl cfg-update -i

(1/2)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?]

n

(2/2)
Merge files: /etc/test~ <=> /etc/._cfg0000_test~ ? [y|n|q|?] n

root@mymachine wrc #
root@mymachine wrc # perl cfg-update -l
/etc/._cfg0000_test
/etc/._cfg0000_test~
root@mymachine wrc # perl cfg-update -p
/etc
/var/qmail/control
/usr/share/config
/usr/kde/2/share/config
/usr/kde/3/share/config
/usr/X11R6/lib/X11/xkb
/usr/kde/3.1/share/config
/usr/share/config
root@mymachine wrc # perl cfg-update -c

Current configuration is: editor(xxdiff) mode(none) backups(on)

Available editors: diff diff3 pdiff sdiff xxdiff sgmldiff
New default editor (press enter to skip) :
-----------------------------------------------------
Here's try 2, saying yes: Seems to be an x server problem- any ideas- I'm lost at this point? I do now have a test.new file that is the new version, so it must be working, but without the gui.

root@mymachine wrc # perl cfg-update -i

(1/2)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?] y
Backup file: /etc/test -> /etc/test.old
Backup file: /etc/._cfg0000_test -> /etc/test.new
Open editor: xxdiff /etc/test /etc/._cfg0000_test
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

xxdiff: cannot connect to X server :0.0
Delete file: /etc/._cfg0000_test ? [y|b|n|q|?] y

(2/2)
Merge files: /etc/test~ <=> /etc/._cfg0000_test~ ? [y|n|q|?] y
Backup file: /etc/test~ -> /etc/test~.old
Backup file: /etc/._cfg0000_test~ -> /etc/test~.new
Open editor: xxdiff /etc/test~ /etc/._cfg0000_test~
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

xxdiff: cannot connect to X server :0.0
Delete file: /etc/._cfg0000_test~ ? [y|b|n|q|?] n

root@mymachine wrc #
root@mymachine wrc #
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

xentric · Guru Joined: 16 Mar 2003 Posts: 410 Location: Netherlands

wrc1944 · Posted: Tue Oct 14, 2003 1:26 pm Post subject:

I'm in the full-blown kde 3.1.3 desktop, and open a shell konsole as usual, su to root and have to type "perl cfg-update [option]" to get anything but a "command not found." Typing only cfg-update outputs "command not found." It appears to work at cli level, but no gui comes up, no matter what I do.

I'm still getting the can't connect to x server problem.

I'll replace my copy/paste version with the download- just did it, aand it is slightly smaller- maybe that's it.

OK- compared the two cfg-update versions manually- the only difference is the mode in the new one is now "-i" instead of "none." However, the downloaded one is 8.971kb, and the c/p one is 9,406. Strangely, they appear identical line by line in regular konqueror windows- no extra lines or text I can see. I'll try again, from scratch, and post back.

wrc1944
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

wrc1944 · Posted: Tue Oct 14, 2003 1:34 pm Post subject:

OK- recreated the test files in /etc, and replaced the cfg-update file with the downloaded one. Same result- see below. If I understand correctly, this should be giving me the gui at this point?

wrc@mymachine wrc $ su
Password:
root@mymachine wrc # cfg-update
bash: cfg-update: command not found
root@mymachine wrc # perl cfg-update

(1/1)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?] n

root@mymachine wrc #
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

wrc1944 · Posted: Tue Oct 14, 2003 2:25 pm Post subject:

Here's the output with answering "y."

wrc@mymachine wrc $ su
Password:
root@mymachine wrc # perl cfg-update

(1/1)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?] y
Backup file: /etc/test -> /etc/test.old
Backup file: /etc/._cfg0000_test -> /etc/test.new
Open editor: xxdiff /etc/test /etc/._cfg0000_test
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

xxdiff: cannot connect to X server :0.0
Delete file: /etc/._cfg0000_test ? [y|n|q|?] n

root@mymachine wrc #
-------------------------------------------------------------
Seems I still have the x server problem. Should I try another editor?

Or perhaps some kind of linkage? I'm a little over my head here. I've got some .xsession errors in /home/wrc (after deleting all previous ones, and then trying cfg-update again)- should I post those too? I'm starting to think it's a kde problem, although kde works fine in all cases so far.

wrc1944
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

meowsqueak · Posted: Tue Oct 14, 2003 7:59 pm Post subject:

Try typing 'xhost +localhost' in one of your xterms. Looks like you're trying to open xxdiff from a remote shell or something.

wrc1944 · Posted: Tue Oct 14, 2003 10:06 pm Post subject:

meowsqueak,
I must not understand the syntax, or where and when yo mean to type this- typing xhost +localhost gives command not found, as user or as root.

Please give a complete example of what you mean.

wrc1944
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

xentric · Guru Joined: 16 Mar 2003 Posts: 410 Location: Netherlands

wrc1944 · Posted: Tue Oct 14, 2003 11:30 pm Post subject:

Great screenshot! I'm looking forward to getting it to work. However, as I said, typing xhost +localhost does nothing. It's obvious I'm not getting x to open. Other progs work fine, and open in x windows from a command line, like gkrellm, kmplayer, etc, so I can't understand this.

wrc@mymachine wrc $ su
Password:
root@mymachine wrc # xhost +localhost
bash: xhost: command not found
root@mymachine wrc #

What am I doing wrong?

wrc1944
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

meowsqueak · Posted: Tue Oct 14, 2003 11:41 pm Post subject:

You are becoming 'root' but the environment does not have DISPLAY set. So, first:

xentric · Guru Joined: 16 Mar 2003 Posts: 410 Location: Netherlands

Is anyone else having problems with this script? Similar problems?

wrc1944 · Posted: Wed Oct 15, 2003 12:46 am Post subject:

Here's the output:

wrc@mymachine wrc $ su
Password:

root@mymachine wrc # export DISPLAY=localhost:0,0
root@mymachine wrc # perl cfg-update -i

(1/1)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?] y
Backup file: /etc/test -> /etc/test.old
Backup file: /etc/._cfg0000_test -> /etc/test.new
Open editor: xxdiff /etc/test /etc/._cfg0000_test
xxdiff: cannot connect to X server localhost:0,0
Delete file: /etc/._cfg0000_test ? [y|n|q|?] n

root@mymachine wrc #

I'm already in the wheel group. This is from /etc/group:

kmem::9:
wheel::10:root,rob,wrc
floppy::11:root,wrc

I assume I don't need to do the sudo thing, since I'm already set up that way??? Correct?

wrc1944
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

meowsqueak · Posted: Wed Oct 15, 2003 12:55 am Post subject:

Only if /etc/sudoers is correct and the wheel group is uncommented (and therefore allowed to use sudo). Use 'visudo' ONLY to edit this file.

xentric · Guru Joined: 16 Mar 2003 Posts: 410 Location: Netherlands

wrc1944 · Posted: Wed Oct 15, 2003 3:08 am Post subject:

Sorry about the typo. Tried again, both ways, still get same results.Any idea on what the No protocol specified means? In kde info-x-server, it says the name of the display is indeed :0.0, so that seems correct.

wrc@mymachine wrc $ su
Password:
root@mymachine wrc # export DISPLAY=localhost:0.0
root@mymachine wrc # perl cfg-update -i

(1/1)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?] y
Backup file: /etc/test -> /etc/test.old
Backup file: /etc/._cfg0000_test -> /etc/test.new
Open editor: xxdiff /etc/test /etc/._cfg0000_test
Xlib: connection to "localhost:0.0" refused by server
Xlib: No protocol specified

xxdiff: cannot connect to X server localhost:0.0
Delete file: /etc/._cfg0000_test ? [y|n|q|?] n

root@mymachine wrc #
-------------------------------------------------------
root@mymachine wrc # export DISPLAY=:0
root@mymachine wrc # perl cfg-update -i

(1/1)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?] y
Backup file: /etc/test -> /etc/test.old
Backup file: /etc/._cfg0000_test -> /etc/test.new
Open editor: xxdiff /etc/test /etc/._cfg0000_test
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

xxdiff: cannot connect to X server :0
Delete file: /etc/._cfg0000_test ? [y|n|q|?] n

root@mymachine wrc #
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

meowsqueak · Posted: Wed Oct 15, 2003 7:22 am Post subject:

Did you try 'xhost +localhost' with this?

xentric · Guru Joined: 16 Mar 2003 Posts: 410 Location: Netherlands

lazarusrat · Posted: Wed Oct 15, 2003 1:54 pm Post subject:

wrc1944,
A lot of this is speculation since I don't have gentoo in front of me right now, but I'm guessing /usr/local/bin and /usr/X11R6/bin aren't in your path for root which is why you can't just type cfg-update or xhost.

It may be in the path for a "regular" root login, but "su" puts you into a slightly different environment than logging in as root on a terminal and/or running a root xterm. Try using "su -" instead of just "su" (that's just a space and a hyphen) and see if that lets you type just the command. If not, you should be able to type /usr/local/bin/cfg-update and get it to run.

You more than likely have at least one of the two files /root/.bashrc and /root/.profile. If you only have one, you can make a symlink to that file for the other one. This will also make su do all the things a normal login does. And if that still doesn't put those directories in your path, you can add a line at the end:

wrc1944 · Posted: Wed Oct 15, 2003 6:19 pm Post subject:

Here's the output from my latest tries. This is really getting frustrating. Where am I going wrong here? One would think this would be easy to get working, but not being an expert, it's apparently beyond my understanding. (BTW, I have no .bashrc or .profile files in /root, but do have an /etc/profile, and a /home/wrc/.bashrc)

------------------------------------------------------------------------------
wrc@mymachine wrc $ su
Password:
root@mymachine wrc # /usr/X11R6/bin/xhost +localhost
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

/usr/X11R6/bin/xhost: unable to open display ":0.0"
root@mymachine wrc #
-----------------------------------------------------------------------------
root@mymachine wrc # /usr/local/bin/cfg-update -i

(1/1)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?] y
Backup file: /etc/test -> /etc/test.old
Backup file: /etc/._cfg0000_test -> /etc/test.new
Open editor: xxdiff /etc/test /etc/._cfg0000_test
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

xxdiff: cannot connect to X server :0.0
Delete file: /etc/._cfg0000_test ? [y|n|q|?] n
--------------------------------------------------------------------------------------------

root@mymachine wrc # su -
mymachine root # perl cfg-update -i
Can't open perl script "cfg-update": No such file or directory
mymachine root # cfg-update -i

(1/1)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?] y
Backup file: /etc/test -> /etc/test.old
Backup file: /etc/._cfg0000_test -> /etc/test.new
Open editor: xxdiff /etc/test /etc/._cfg0000_test
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

xxdiff: cannot connect to X server :0.0
Delete file: /etc/._cfg0000_test ? [y|n|q|?] n
-----------------------------------------------------------------------------------------------------
mymachine root # /usr/X11R6/bin/xhost +localhost
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

/usr/X11R6/bin/xhost: unable to open display ":0.0"
---------------------------------------------------------------------------------------------
mymachine root # export DISPLAY=localhost:0.0
mymachine root # cfg-update -i

(1/1)
Merge files: /etc/test <=> /etc/._cfg0000_test ? [y|n|q|?] y
Backup file: /etc/test -> /etc/test.old
Backup file: /etc/._cfg0000_test -> /etc/test.new
Open editor: xxdiff /etc/test /etc/._cfg0000_test
Xlib: connection to "localhost:0.0" refused by server
Xlib: No protocol specified

xxdiff: cannot connect to X server localhost:0.0
Delete file: /etc/._cfg0000_test ? [y|n|q|?] n
------------------------------------------------------------------------------

mymachine root # export DISPLAY=localhost:0.0
mymachine root # /usr/X11R6/bin/xhost +localhost
Xlib: connection to "localhost:0.0" refused by server
Xlib: No protocol specified

/usr/X11R6/bin/xhost: unable to open display "localhost:0.0"
-----------------------------------------------------------------------------------------
mymachine root # export PATH=PATH:/usr/local/bin:/usr/X11R6/bin
mymachine root # perl cfg-update -i
-bash: perl: command not found
-----------------------------------------------------------------------------------------
mymachine root # cfg-update -i
Can't exec "id": No such file or directory at /usr/local/bin/cfg-update line 210.
Use of uninitialized value in scalar chomp at /usr/local/bin/cfg-update line 211.
sh: line 1: cat: command not found
sh: line 1: grep: command not found
sh: line 1: env: command not found
sh: line 1: grep: command not found
Use of uninitialized value in numeric ne (!=) at /usr/local/bin/cfg-update line 78.
---------------------------------------------------------------------------------------------
mymachine root # /usr/local/bin/cfg-update -i
Can't exec "id": No such file or directory at /usr/local/bin/cfg-update line 210.
Use of uninitialized value in scalar chomp at /usr/local/bin/cfg-update line 211.
sh: line 1: cat: command not found
sh: line 1: grep: command not found
sh: line 1: env: command not found
sh: line 1: grep: command not found
Use of uninitialized value in numeric ne (!=) at /usr/local/bin/cfg-update line 78.

mymachine root #
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0

lazarusrat · Posted: Wed Oct 15, 2003 6:41 pm Post subject:

Hm.

I left the $ out of this in my original post (edited now):

meowsqueak · Posted: Wed Oct 15, 2003 7:03 pm Post subject:

PLEASE, use 'sudo'!!!

These problems are all part of the fact that the root environment isn't set up to access your X server properly. If you use 'sudo', then your current X environment will be used, which *will* work.

wrc1944 · Posted: Wed Oct 15, 2003 10:58 pm Post subject:

I appreciate all the time you guys are spending trying to help me! I tried sudo, read the man sudo pages, but still can't understand what this has to do with the x-server not being invoked with cfg-update. I thought if I'm root, that would be it, and I could run anything. (I just came from Mandrake). Anyway, an example of how to use sudo in this particular case would be helpful. As user, when I type sudo, all I get is the options for usage.

Here's my /etc/hosts file- is there something wrong with it? I installed with dialup, with the live cd and knoppix cd, if that's relevant.

Thanks much,
wrc1944
----------------------------------------------------------------
# /etc/hosts: This file describes a number of hostname-to-address
# mappings for the TCP/IP subsystem. It is mostly
# used at boot time, when no name servers are running.
# On small systems, this file can be used instead of a
# "named" name server. Just add the names, addresses
# and any aliases to this file...
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/hosts,v 1.8 2003/08/04 20:12:25 azarah Exp $
#

127.0.0.1 localhost
# IPV6 versions of localhost and co
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
--------------------------------------------------------
MY SUDOERS FILE:

# sudoers file.
#
# This file MUST be edited with the 'visudo' command as root.
#
# See the sudoers man page for the details on how to write a sudoers file.
#

# Host alias specification

# User alias specification

# Cmnd alias specification

# Defaults specification

# User privilege specification
root ALL=(ALL) ALL

# Uncomment to allow people in group wheel to run all commands
%wheel ALL=(ALL) ALL

# Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL

# Samples
# %users ALL=/sbin/mount /cdrom,/sbin/umount /cdrom
# %users localhost=/sbin/shutdown -h now

When I edited sudoers as instructed, but visudo brought up nano, not vi, so I used that. Can that be a problem? Isn't a file editor a just file editor?
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.40-r5, gcc-14
kernel-6.11.3 USE=experimental python3_12.7-final-0