| View previous topic :: View next topic |
| Author |
Message |
sdoudou306
n00b
Joined: 15 Mar 2014
Posts: 35
|
 Posted: Sun Apr 27, 2014 8:05 pm Post subject: Erreur du demarrage du service DHCP [RESOLU] |
 |
|
bonjour après plusieurs tentative de réglage de mon fichier de configuration j'ai toujours la même erreur.
| Code: |
localhost ~ # /etc/init.d/dhcpd start
* Starting dhcpd ...
* start-stop-daemon: failed to start `/usr/sbin/dhcpd' [ !! ]
* ERROR: dhcpd failed to start
|
voici le log
| Code: |
Apr 27 21:56:29 localhost dhcpd: Internet Systems Consortium DHCP Server 4.2.5-P1 Gentoo-r2
Apr 27 21:56:29 localhost dhcpd: Copyright 2004-2013 Internet Systems Consortium.
Apr 27 21:56:29 localhost dhcpd: All rights reserved.
Apr 27 21:56:29 localhost dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Apr 27 21:56:29 localhost dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Apr 27 21:56:29 localhost dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Apr 27 21:56:29 localhost dhcpd: Wrote 0 leases to leases file.
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: No subnet declaration for enp3s0 (192.168.3.2).
Apr 27 21:56:29 localhost dhcpd: ** Ignoring requests on enp3s0. If this is not what
Apr 27 21:56:29 localhost dhcpd: you want, please write a subnet declaration
Apr 27 21:56:29 localhost dhcpd: in your dhcpd.conf file for the network segment
Apr 27 21:56:29 localhost dhcpd: to which interface enp3s0 is attached. **
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: Not configured to listen on any interfaces!
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: This version of ISC DHCP is based on the release available
Apr 27 21:56:29 localhost dhcpd: on ftp.isc.org. Features have been added and other changes
Apr 27 21:56:29 localhost dhcpd: have been made to the base software release in order to make
Apr 27 21:56:29 localhost dhcpd: it work better with this distribution.
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: Please report for this software via the Gentoo Bugzilla site:
Apr 27 21:56:29 localhost dhcpd: http://bugs.gentoo.org/
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: exiting.
|
je ne comprend pas quel est le problème 
Last edited by sdoudou306 on Sun May 04, 2014 7:05 am; edited 1 time in total |
|
| Back to top |
|
 |
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8723
Location: ~Brussels - Belgique
|
| Posted: Sun Apr 27, 2014 8:12 pm Post subject: |
|
|
As-tu configuré quelque chose à ce niveau ?
De quel paquet vient ce service, car il y en a plusieurs qui proposent dhcpcd.
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
sdoudou306
n00b
Joined: 15 Mar 2014
Posts: 35
|
| Posted: Sun Apr 27, 2014 8:32 pm Post subject: |
|
|
| je ne me souvient pas car lors de mon installation j'ai eu plusieurs problème et il me semble avoir mis dev-lang/php mais je n'ai pas plus d'info |
|
| Back to top |
|
|
USTruck
Guru
Joined: 21 Aug 2005
Posts: 423
Location: La Louviere (Belgique)
|
| Posted: Mon Apr 28, 2014 6:02 am Post subject: Re: Erreur du demarrage du service DHCP |
|
|
| sdoudou306 wrote: | bonjour après plusieurs tentative de réglage de mon fichier de configuration j'ai toujours la même erreur.
| Code: |
Apr 27 21:56:29 localhost dhcpd: No subnet declaration for enp3s0 (192.168.3.2).
Apr 27 21:56:29 localhost dhcpd: ** Ignoring requests on enp3s0. If this is not what
Apr 27 21:56:29 localhost dhcpd: you want, please write a subnet declaration
Apr 27 21:56:29 localhost dhcpd: in your dhcpd.conf file for the network segment
Apr 27 21:56:29 localhost dhcpd: to which interface enp3s0 is attached. **
|
|
Bonjour,
192.168.3.2 ... ip fixe ou recue par dhcp ?
ip recue par dhcp : revoir config de ton réseau, il est tjs préférable d'avoir une ip fixe pour un serveur
Pour le serveur DHCP, tu lance le serveur dhcp pas le client dhcp correct ?
Si serveur : revoir le fichier config dhcpd.conf pour assigner un range IP pour la carte enp3s0 ou lui indiquer la bonne carte a utiliser pour le serveur dhcp |
|
| Back to top |
|
|
sdoudou306
n00b
Joined: 15 Mar 2014
Posts: 35
|
| Posted: Thu May 01, 2014 12:49 pm Post subject: |
|
|
Bonjour mon serveur est en ip fixe.
voici mon fichier dhcpd.conf si quelqu’un à une idée de mon erreur:
| Code: |
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
#option domain-name "my_serveur";
#option domain-name-servers 192.168.3.21, 192.168.3.255;
#default-lease-time 600;
#max-lease-time 7200;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
#log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
#subnet 192.168.3.2 netmask 255.255.255.0 {
#}
# This is a very basic subnet declaration.
#subnet 10.254.239.0 netmask 255.255.255.224 {
# range 10.254.239.10 10.254.239.20;
# option routers 192.168.3.1;
#}
# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.
#subnet 192.168.3.2 netmask 255.255.255.224 {
# range dynamic-bootp 192.168.4.1 192.168.5.255;
# option broadcast-address 192.168.0.255;
# option routers rtr-239-32-1.example.org;
#}
# A slightly different configuration for an internal subnet.
#subnet 192.168.3.2 netmask 255.255.255.0 {
# range 192.168.4.1 192.168.5.255;
# option domain-name-servers ns1.loacalhost;
# option domain-name "palmirawifi";
# option routers 192.168.3.1;
# option broadcast-address 192.168.0.255;
# default-lease-time 600;
# max-lease-time 7200;
#}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename "vmunix.passacaglia";
# server-name "toccata.fugue.com";
#}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}
# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.
#class "foo" {
# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}
#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of "foo";
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of "foo";
# range 10.0.29.10 10.0.29.230;
# }
#}
|
Merci de votre collaboration |
|
| Back to top |
|
|
USTruck
Guru
Joined: 21 Aug 2005
Posts: 423
Location: La Louviere (Belgique)
|
|
| Back to top |
|
|
|
French
