| View previous topic :: View next topic |
| Author |
Message |
tom!79
n00b
Joined: 08 Jul 2014
Posts: 12
|
 Posted: Wed Jul 09, 2014 7:46 pm Post subject: Gentoo RapsberryPi eccessive lag in command execution |
 |
|
Hi all,
i recenly reinstalled gentoo on my raspberrypi, but i dunno why i have a sort of "lag" in terminal:
Eselect example:
| Code: |
myrasp ~ #: time eselect profile list
Available profile symlink targets:
[1] default/linux/arm/13.0
[2] default/linux/arm/13.0/desktop
[3] default/linux/arm/13.0/desktop/gnome
[4] default/linux/arm/13.0/desktop/gnome/systemd
[5] default/linux/arm/13.0/desktop/kde
[6] default/linux/arm/13.0/desktop/kde/systemd
[7] default/linux/arm/13.0/developer
[8] default/linux/arm/13.0/armv4
[9] default/linux/arm/13.0/armv4/desktop
[10] default/linux/arm/13.0/armv4/desktop/gnome
[11] default/linux/arm/13.0/armv4/desktop/kde
[12] default/linux/arm/13.0/armv4/developer
[13] default/linux/arm/13.0/armv4t
[14] default/linux/arm/13.0/armv4t/desktop
[15] default/linux/arm/13.0/armv4t/desktop/gnome
[16] default/linux/arm/13.0/armv4t/desktop/kde
[17] default/linux/arm/13.0/armv4t/developer
[18] default/linux/arm/13.0/armv5te
[19] default/linux/arm/13.0/armv5te/desktop
[20] default/linux/arm/13.0/armv5te/desktop/gnome
[21] default/linux/arm/13.0/armv5te/desktop/kde
[22] default/linux/arm/13.0/armv5te/developer
[23] default/linux/arm/13.0/armv6j *
[24] default/linux/arm/13.0/armv6j/desktop
[25] default/linux/arm/13.0/armv6j/desktop/gnome
[26] default/linux/arm/13.0/armv6j/desktop/kde
[27] default/linux/arm/13.0/armv6j/developer
[28] default/linux/arm/13.0/armv7a
[29] default/linux/arm/13.0/armv7a/desktop
[30] default/linux/arm/13.0/armv7a/desktop/gnome
[31] default/linux/arm/13.0/armv7a/desktop/kde
[32] default/linux/arm/13.0/armv7a/developer
[33] hardened/linux/arm/armv7a
[34] hardened/linux/arm/armv6j
[35] hardened/linux/uclibc/arm/armv7a
[36] hardened/linux/musl/arm/armv7a
real 1m15.929s
user 0m34.600s
sys 0m1.070s
|
After hitting enter to execute eselect, the systems seems hangs for about 40sec then do all as usual.Q
I followed the Quick Installation Guide, my SD card is a Kingstone MicroSD microSDHC/SDXC – UHS-I Class 10 32Gb
Raspberry Kernel is:
| Code: | | Linux version 3.12.23+ (dc4@dc4-Latitude-E6510) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #692 PREEMPT Thu Jun 26 20:15:50 BST 2014 |
Partitions:
| Code: | Disk /dev/mmcblk0: 29,9 GiB, 32090619904 bytes, 62676992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xf95114c3
Dispositivo Avvio Start Fine Blocks Id System
/dev/mmcblk0p1 2048 206847 102400 c W95 FAT32 (LBA)
/dev/mmcblk0p2 206848 2254847 1024000 82 Linux swap / Solaris
/dev/mmcblk0p3 2254848 62676991 30211072 83 Linux
|
tune2fs info of root fs:
| Code: |
tune2fs -l /dev/mmcblk0p3
tune2fs 1.42.7 (21-Jan-2013)
Filesystem volume name: <none>
Last mounted on: /
Filesystem UUID: b93fef38-cd29-4713-b383-2e629763559f
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize
Filesystem flags: signed_directory_hash
Default mount options: user_xattr acl
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 1888656
Block count: 7552768
Reserved block count: 377638
Free blocks: 6898394
Free inodes: 1648894
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 1022
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 8176
Inode blocks per group: 511
Flex block group size: 16
Filesystem created: Fri Jul 4 02:19:49 2014
Last mount time: Thu Jan 1 01:00:19 1970
Last write time: Thu Jan 1 01:00:19 1970
Mount count: 23
Maximum mount count: -1
Last checked: Fri Jul 4 02:19:49 2014
Check interval: 0 (<none>)
Lifetime writes: 6026 MB
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 256
Required extra isize: 28
Desired extra isize: 28
Journal inode: 8
First orphan inode: 1180229
Default directory hash: half_md4
Directory Hash Seed: 01b743a9-dcb8-4ad0-a3ae-9593f179e27a
Journal backup: inode blocks
|
I suppose that's a fs bug, maybe i have done something wrong, any idea? |
|
| Back to top |
|
 |
roarinelk
Guru
Joined: 04 Mar 2004
Posts: 520
|
| Posted: Thu Jul 10, 2014 7:29 am Post subject: |
|
|
try to strace one of the slow commands, maybe you can find out which syscalls are
taking so long. |
|
| Back to top |
|
|
tom!79
n00b
Joined: 08 Jul 2014
Posts: 12
|
| Posted: Thu Jul 10, 2014 9:07 am Post subject: |
|
|
Hi roarinelk, as you suggest you can find strace at the end of this post (my skill in reading that is = 0, the only thing that i have notice is a 36sec hang near the end of strace), this morning with a less workload this is the situation, even if is smaller the delay persists:
| Code: |
time eselect profile list
Available profile symlink targets:
[1] default/linux/arm/13.0
[2] default/linux/arm/13.0/desktop
[3] default/linux/arm/13.0/desktop/gnome
[4] default/linux/arm/13.0/desktop/gnome/systemd
[5] default/linux/arm/13.0/desktop/kde
[6] default/linux/arm/13.0/desktop/kde/systemd
[7] default/linux/arm/13.0/developer
[8] default/linux/arm/13.0/armv4
[9] default/linux/arm/13.0/armv4/desktop
[10] default/linux/arm/13.0/armv4/desktop/gnome
[11] default/linux/arm/13.0/armv4/desktop/kde
[12] default/linux/arm/13.0/armv4/developer
[13] default/linux/arm/13.0/armv4t
[14] default/linux/arm/13.0/armv4t/desktop
[15] default/linux/arm/13.0/armv4t/desktop/gnome
[16] default/linux/arm/13.0/armv4t/desktop/kde
[17] default/linux/arm/13.0/armv4t/developer
[18] default/linux/arm/13.0/armv5te
[19] default/linux/arm/13.0/armv5te/desktop
[20] default/linux/arm/13.0/armv5te/desktop/gnome
[21] default/linux/arm/13.0/armv5te/desktop/kde
[22] default/linux/arm/13.0/armv5te/developer
[23] default/linux/arm/13.0/armv6j *
[24] default/linux/arm/13.0/armv6j/desktop
[25] default/linux/arm/13.0/armv6j/desktop/gnome
[26] default/linux/arm/13.0/armv6j/desktop/kde
[27] default/linux/arm/13.0/armv6j/developer
[28] default/linux/arm/13.0/armv7a
[29] default/linux/arm/13.0/armv7a/desktop
[30] default/linux/arm/13.0/armv7a/desktop/gnome
[31] default/linux/arm/13.0/armv7a/desktop/kde
[32] default/linux/arm/13.0/armv7a/developer
[33] hardened/linux/arm/armv7a
[34] hardened/linux/arm/armv6j
[35] hardened/linux/uclibc/arm/armv7a
[36] hardened/linux/musl/arm/armv7a
real 0m37.289s
user 0m34.650s
sys 0m0.980s
|
Strace -tt eselect profile list :
| Code: |
10:46:22.109314 read(3, "/usr/share/eselect/modules/profi"..., 128) = 43
10:46:22.115020 read(3, "", 128) = 0
10:46:22.117626 close(3) = 0
10:46:22.118083 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
10:46:22.118571 rt_sigaction(SIGINT, {0x3e448, [], 0x4000000 /* SA_??? */}, {SIG_DFL, [], 0x4000000 /* SA_??? */}, 8) = 0
10:46:22.119076 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 13613
10:46:22.119830 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
10:46:22.120444 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=13613, si_status=0, si_utime=0, si_stime=1} ---
10:46:22.120742 wait4(-1, 0xbea9a360, WNOHANG, NULL) = -1 ECHILD (No child processes)
10:46:22.121218 sigreturn() (mask []) = 0
10:46:22.121697 rt_sigaction(SIGINT, {SIG_DFL, [], 0x4000000 /* SA_??? */}, {0x3e448, [], 0x4000000 /* SA_??? */}, 8) = 0
10:46:22.122511 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
10:46:22.123027 rt_sigprocmask(SIG_BLOCK, [CHLD], [INT CHLD], 8) = 0
10:46:22.123595 rt_sigprocmask(SIG_SETMASK, [INT CHLD], NULL, 8) = 0
10:46:22.124060 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb6d40068) = 13614
10:46:22.125413 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
10:46:22.125936 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
10:46:22.126575 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
10:46:22.127050 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
10:46:22.127628 rt_sigaction(SIGINT, {0x3e448, [], 0x4000000 /* SA_??? */}, {SIG_DFL, [], 0x4000000 /* SA_??? */}, 8) = 0
10:46:22.130563 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 13614
10:46:58.900656 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
10:46:58.901180 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=13614, si_status=0, si_utime=40, si_stime=22} ---
10:46:58.901490 wait4(-1, 0xbea9a818, WNOHANG, NULL) = -1 ECHILD (No child processes)
10:46:58.901924 sigreturn() (mask [HUP INT]) = 0
10:46:58.902474 rt_sigaction(SIGINT, {SIG_DFL, [], 0x4000000 /* SA_??? */}, {0x3e448, [], 0x4000000 /* SA_??? */}, 8) = 0
10:46:58.903350 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
10:46:58.903860 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
10:46:58.904430 read(255, "", 4450) = 0
10:46:58.905191 exit_group(0) = ?
10:46:58.906295 +++ exited with 0 +++
|
FULL REPORT ON PASTEBIN: http://pastebin.com/acmaFiLH |
|
| Back to top |
|
|
Ant P.
Watchman
Joined: 18 Apr 2009
Posts: 6920
|
| Posted: Sat Jul 12, 2014 2:19 am Post subject: |
|
|
You'll need to rerun that with strace -f or strace -ff, it looks like the delay is in a child process.
Just a random guess: a delay of 30 seconds might be something network-related. |
|
| Back to top |
|
|
tom!79
n00b
Joined: 08 Jul 2014
Posts: 12
|
|
| Back to top |
|
|
freke
Veteran
Joined: 23 Jan 2003
Posts: 1038
Location: Somewhere in Denmark
|
| Posted: Wed Jul 23, 2014 7:40 pm Post subject: |
|
|
No clue on how to read those straces 
Do you experience same lag executing other commands - eselect profile list takes about the same time on my Raspberry Pi, but I don't generally feel like I'm getting eccessive lag. |
|
| Back to top |
|
|
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8723
Location: ~Brussels - Belgique
|
| Posted: Wed Jul 23, 2014 10:03 pm Post subject: |
|
|
With a USB hard drive and portage in a squashed filesystem:
| Code: | real 0m33.564s
user 0m30.488s
sys 0m1.937s
|
The SD card performance are really bad. Try to put / on a USB hard drive 
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
tom!79
n00b
Joined: 08 Jul 2014
Posts: 12
|
| Posted: Tue Dec 09, 2014 2:37 pm Post subject: |
|
|
I'm googling around looking for something about this problem, but i still haven't found a solution so...
To show better what i mean, a made this video.
(i'm sorry but i was hurry and i uploaded it whiout editing)
Look how much time passes between pressing the enter key and the start of the progam:
https://www.youtube.com/watch?v=NgjQSLe6fbU
Just see and tell me if is normal or not, thank you
I can do other test, if u want.
@xaviermiller
I need that raspberrypi use only a sd card no other device (maybe you are right with an external hdd or ssd over usb i maybe get better performance, if the problem is i/o access time, but for my needs i can't use that solution) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on Alternative Architectures
