| View previous topic :: View next topic |
| Author |
Message |
SarahS93
l33t
Joined: 21 Nov 2013
Posts: 730
|
 Posted: Fri Aug 29, 2014 5:52 am Post subject: qemu vnc copy&paste |
 |
|
Im Gast habe ich folgedes aktiviert:
| Code: | Device Drivers --->
Input device support --->
-*- Generic input layer (needed for keyboard, mouse, ...)
[*] Miscellaneous devices --->
<*> User level driver support |
Dann habe ich emerge -av app-emulation/spice-vdagent gemacht
Bei "/etc/init.d/spice-vdagent start"
kommt folgende Fehlermeldung
| Code: | * Checking for required modules and devices ...
* Required virtio port does not exist. Make sure you
* started the virtual machine with appropriate parameters. [ !! ]
* ERROR: spice-vdagent failed to start |
Was muss im Kernel bei dem Gast noch alles dazu aktiviert werden?
Was muss beim Host gemacht werden? |
|
| Back to top |
|
 |
SarahS93
l33t
Joined: 21 Nov 2013
Posts: 730
|
| Posted: Mon Sep 01, 2014 7:55 pm Post subject: |
|
|
| Wie macht Ihr das denn.... |
|
| Back to top |
|
|
SarahS93
l33t
Joined: 21 Nov 2013
Posts: 730
|
| Posted: Thu Sep 04, 2014 6:43 am Post subject: |
|
|
| Huhu... |
|
| Back to top |
|
|
yuhu
Tux's lil' helper
Joined: 17 Oct 2006
Posts: 86
|
| Posted: Thu Sep 04, 2014 1:07 pm Post subject: |
|
|
hi,
wie startest du die VM? libvirt? |
|
| Back to top |
|
|
SarahS93
l33t
Joined: 21 Nov 2013
Posts: 730
|
| Posted: Thu Sep 04, 2014 2:23 pm Post subject: |
|
|
Nee, so:
| Code: | qemu-system-x86_64 \
-k de -enable-kvm -smp 4 -m 8192 -localtime -name __vm91-linux_test \
-hda vm91_disk1.img \
-vga qxl \
-net nic,model=virtio,macaddr=00:00:00:00:00:91 \
-net tap,ifname=qtap91,script=no,downscript=no \
-usbdevice tablet \
-vnc 192.168.0.1:91 \
-spice port=5930,disable-ticketing \
-device virtio-serial-pci \
-device virtserialport,chardev=spicechannel0,name=com.redhat.spice.0 \
-chardev spicevmc,id=spicechannel0,name=vdagent \
-daemonize \
-pidfile vm91_run.pid & |
|
|
| Back to top |
|
|
yuhu
Tux's lil' helper
Joined: 17 Oct 2006
Posts: 86
|
| Posted: Thu Sep 04, 2014 7:14 pm Post subject: |
|
|
ich verwende libvirt und da sieht die Commandozeile etwas üppiger aus.
| Code: | qemu-system-x86_64
-name extern
-S
-machine pc-0.14,accel=kvm,usb=off
-cpu SandyBridge,+osxsave,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pbe,+tm,+ht,+ss,+acpi,+ds,+vme
-m 2048
-realtime mlock=off
-smp 2,sockets=2,cores=1,threads=1
-uuid 469a84db-1b0c-2048-6b11-f8c94fce467d
-no-user-config
-nodefaults
-chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/extern.monitor,server,nowait
-mon chardev=charmonitor,id=monitor,mode=control
-rtc base=utc
-no-shutdown
-boot menu=off,strict=on
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x6
-drive file=/dev/vgvirt/extern,if=none,id=drive-virtio-disk0,format=raw
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
-drive if=none,id=drive-ide0-1-0,readonly=on,format=raw
-device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0
-netdev tap,fd=20,id=hostnet0,vhost=on,vhostfd=21
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:15:54:c9,bus=pci.0,addr=0x3
-chardev pty,id=charserial0
-device isa-serial,chardev=charserial0,id=serial0
-chardev spicevmc,id=charchannel0,name=vdagent
-device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.spice.0
-spice port=5900,addr=0.0.0.0,disable-ticketing,seamless-migration=on
-device qxl
-vga,id=video0,ram_size=67108864,vram_size=67108864,bus=pci.0,addr=0x2
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
-msg timestamp=on
|
vielleicht kannst du die relevanten Zeilen bei dir mal testen. |
|
| Back to top |
|
|
SarahS93
l33t
Joined: 21 Nov 2013
Posts: 730
|
| Posted: Sun Sep 21, 2014 7:42 am Post subject: |
|
|
Bei mir tut sich nichts, egal was und wie ich es versuche.
Ich frage mich aber auch warum so auf diesem Wege?
Mit VNC verbinde ich mich in die VM, also muss das copy&paste durch und mit VNC verwaltet werden?
| Code: | vncviewer --help
TigerVNC Viewer 64-bit v1.3.1 (20140628)
Built on Jun 28 2014 at 06:39:47
Copyright (C) 1999-2011 TigerVNC Team and many others (see README.txt)
See http://www.tigervnc.org for information on TigerVNC.
usage: vncviewer [parameters] [host:displayNum] [parameters]
vncviewer [parameters] -listen [port] [parameters]
Options:
-display Xdisplay - Specifies the X display for the viewer window
-geometry geometry - Standard X position and sizing specification.
Parameters can be turned on with -<param> or off with -<param>=0
Parameters which take a value can be specified as -<param> <value>
Other valid forms are <param>=<value> -<param>=<value> --<param>=<value>
Parameter names are case-insensitive. The parameters are:
Global Parameters:
ZlibLevel - Zlib compression level (default=-1)
Log - Specifies which log output should be directed to which
target logger, and the level of output to log. Format is
<log>:<target>:<level>[, ...]. (default=)
ImprovedHextile - Use improved compression algorithm for Hextile encoding
which achieves better compression ratios by the cost of
using more CPU time (default=1)
via - Gateway to tunnel via (default=)
FullscreenSystemKeys - Pass special keys (like Alt+Tab) directly to the
server when in full screen mode. (default=1)
MenuKey - The key which brings up the popup menu (default=F8)
SendPrimary - Send the primary selection and cut buffer to the server as
well as the clipboard selection (default=1)
SendClipboard - Send clipboard changes to the server (default=1)
AcceptClipboard - Accept clipboard changes from the server (default=1)
Shared - Don't disconnect other viewers upon connection - share the
desktop instead (default=0)
ViewOnly - Don't send any mouse or keyboard events to the server
(default=0)
RemoteResize - Dynamically resize the remote desktop size as the size of
the local client window changes. (Does not work with all
servers) (default=1)
listen - Listen for connections from VNC servers (default=0)
geometry - Specify size and position of viewer window (default=)
DesktopSize - Reconfigure desktop size on the server on connect (if
possible) (default=)
FullScreen - Full screen mode (default=0)
Maximize - Maximize viewer window (default=0)
QualityLevel - JPEG quality level. 0 = Low, 9 = High (default=8)
NoJPEG - Disable lossy JPEG compression in Tight encoding.
(default=0)
CompressLevel - Use specified compression level 0 = Low, 6 = High
(default=2)
CustomCompressLevel - Use custom compression level. Default if CompressLevel
is specified. (default=0)
PreferredEncoding - Preferred encoding to use (Tight, ZRLE, Hextile or Raw)
(default=Tight)
LowColourLevel - Alias for LowColorLevel
LowColorLevel - Color level to use on slow connections. 0 = Very Low (8
colors), 1 = Low (64 colors), 2 = Medium (256 colors)
(default=2)
FullColour - Alias for FullColor
FullColor - Use full color (default=1)
AutoSelect - Auto select pixel format and encoding. Default if
PreferredEncoding and FullColor are not specified.
(default=1)
passwd - Alias for PasswordFile
PasswordFile - Password file for VNC authentication (default=)
DotWhenNoCursor - Show the dot cursor when the server sends an invisible
cursor (default=0)
PointerEventInterval - Time in milliseconds to rate-limit successive pointer
events (default=0)
Viewer Parameters:
SecurityTypes - Specify which security scheme to use (None, VncAuth)
(default=VncAuth,None) |
Ich verbinde mich mit "vncviewer 192.168.0.1:1"
Drücke ich im VNC-Fenster dann F8 sehe ich das hier:
http://abload.de/img/vnc8tjqi.png
Am PC auf dem ich den vncviewer starte habe ich KDE.
In der VM in der ich mich hin verbinden will läuft XFCE.
Kann es an einer Inkompatibilietät der beiden Zwischenablagen liegen?
Ich verstehe das nicht warum das soo kompliziert zu sein scheint und wo nun der Fehler liegt? |
|
| Back to top |
|
|
SarahS93
l33t
Joined: 21 Nov 2013
Posts: 730
|
| Posted: Wed Sep 24, 2014 9:34 am Post subject: |
|
|
| Huhu |
|
| Back to top |
|
|
Jean-Paul
Guru
Joined: 13 Apr 2009
Posts: 307
|
| Posted: Wed Sep 24, 2014 3:54 pm Post subject: |
|
|
Google gibt da gar nichts her ?
Die Suche nach "vncviewer clipboard" ergibt als ersten Hit (es gibt noch mehr)
https://www.realvnc.com/products/vnc/documentation/5.0/guides/user/ah1025296.html
Vielleicht liegt das Problem auch in der Kombination mit qemu ??
_________________
”Everything should be made as simple as possible, but no simpler.” – Albert Einstein |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
