Index of Gentoo on Sparc

• "Booting headless Ultra 60 via GRUB" Page:1
• "Can't configure kernel anymore" Page:1
• "Kernel panic on Sun Blade 1000" Page:1
• "Help with GRUB on SPARC T4-1" Page:1
• "Dump" Page:1
• "Gentoo on Sun Blade 1500" Page:1
• "[solved] Silo stuck at boot printing only SI" Page:1
• "[Solved]Problem emerging python during installation on SPARC" Page:1
• "Squashfs filesystem could not be mounted error" Page:1
• "Can't run "emerge --ask sys-kernel/gentoo-sources"" Page:1
• "[Solved] Error: Architecture mismatch on "fzero %f8" on T2" Page:1
• "mesa-17.3.9 build failure [solved]" Page:1
• "Out-of-memory kernel panic at boot after glibc upgrade" Page:1
• "compiling kernel on new install on sublade 100" Page:1
• "V490 can't successfully boot any gentoo install media." Page:1
• "udev failed to parse kernel command line" Page:1
• "emerge-webrsync hangs in ldom" Page:1
• "multilib vs. single-lib64" Page:1
• "Oracle Releases Sun4V Linux Sources" Page:1
• "Sun Blade 100 and Kernel 4.0.5" Page:1
• "Giving systemd a try on sparc" Page:1
• "glibc-2.20-r2 flakiness" Page:1
• "Sun Fire T1000 Hard Drive Not Recognized" Page:1
• "sys-devel/kgcc64 being removed on sparc64" Page:1
• "Updated Sparc32 minmal install cd and stages" Page:1
• "Can't get a working kernel compile." Page:1
• "gentoo compile mysql 5.6.17" Page:1
• "Multilib on UltraSPARC" Page:1
• "Sparc boot errors (read error on block)" Page:1
• "Framebuffers on Fujitsu PrimePower 250 server?" Page:1
• "Cannot open root device "hda1" Sun Ultra 10" Page:1
• "mysql-5.6.12 compile fail please help me" Page:1
• "Gentoo on a Sparc T4 - Can this be done?" Page:1
• "LiveCD hangs on T4 boot" Page:1
• "T2000 hangs attempting to mount disk" Page:1
• "SunFire V100: Bus error?" Page:1
• "ext4 and silo?" Page:1
• "Networking broken" Page:1
• "Excessive number of system crashes on Sparc server" Page:1
• "Ultra 60 boot error, kernel 3.5.7" Page:1
• "Cannot install Gentoo on Ultra Sparc machine" Page:1
• "Anyone have a running SunFire V100 with Gentoo?" Page:1
• "Request for an updated CD" Page:1
• "[Solved] Gentoo install segfaulting on chroot" Page:1
• "Sun Fire 280R LiveCD/Install issue" Page:1
• "configure: error: cannot compute suffix of object files" Page:1
• "Last emerge --sync was...." Page:1
• "Upgrading Firefox" Page:1
• "udev-18* unmasking and sparc?" Page:1
• "How to make hostname available to ALOM?" Page:1
• "fan noise on a v880 (speed control?)" Page:1
• "Anybody run Gentoo on Sun v880 or v880z systems?" Page:1
• "January 26-28th Stage 3 issues (and fixes)" Page:1
• "Can't boot my Sun Sparc system from CD" Page:1
• "SILO build failure" Page:1
• "Network do not work on Sunfire V440," Page:1
• "Installing SUN Sunfire V440, UltraSPARC IIIi, Kernel panic" Page:1
• "a gentoo-based linux on sun sparc32 sun4m" Page:1
• "silo issues.." Page:1
• "Installation on Fujitsu Siemens PRIMEPOWER450 4x SPARC64 V" Page:1
• "Problems with file manager on 2.6.39-gentoo-r3" Page:1
• "numlock errors on system startup" Page:1
• "emerge -u doesn't upgrade some packages" Page:1
• "hwclock broken with recent update" Page:1
• "Gentoo fails to mount hard drive during installation" Page:1
• "[Solved] dev-cpp/gtkmm-2.18.2 compile failed" Page:1
• "Ultra 5/10 IDE Kernel Panic: VFS Cannot open root device." Page:1
• "Failure attempting to boot new install on a ultra 10" Page:1
• "Sun Type 5 keybaord not working." Page:1
• "X11 fbdev driver on XVR-500" Page:1
• "Firefox crashes" Page:1
• "Fdisk problem" Page:1
• "New boxen! :)" Page:1
• "LEDs on SunFire v240" Page:1
• ""console [tty01] enabled, bootconsole disabled" boot failure" Page:1
• "kgcc64" Page:1
• "X11 and framebuffers" Page:1
• "silo" Page:1
• "FC-AL disks" Page:1
• "No /usr/src/linux as described in Installation Handbook." Page:1
• "Solaris LDOM and Gentoo Installation" Page:1
• "Trying to build glibc x64 for cross-compiling on SPARC" Page:1
• "Crash problem with serial console attached" Page:1
• "[SunFire v240] Trying to reset existing configuration" Page:1
• "[livecd]Unable to get a prompt via ttyS0 on a SunFire V480." Page:1
• "multilib missing 64 gcc - using stage3-sparc64-multilib-2010" Page:1
• "xfce-base/libxfcegui4-4.6.4 fails to compile" Page:1
• "Issues with SunFire 280R Server" Page:1
• "Apache + Php do not work" Page:1
• "Who's looking forward to Gnome 2.28?" Page:1
• "OBP Question" Page:1
• "wildcatfb & ifb - openbsd graphics driver" Page:1
• "Installing Gentoo SPARC in QEMU" Page:1
• "(SOLVED) Can't boot any iso's on Ultra 5." Page:1
• "Trying to get X working on Ultra 1" Page:1
• "bootable HD-Images avaible? / resetting firmware password" Page:1
• "Multilib" Page:1
• "Need help with Sunblade 1500 (Silver) with XVR-1200" Page:1
• "Iptables & network performance on SunFire v100" Page:1
• "gnat-gcc fails" Page:1
• "Will any PCI card work in E420R" Page:1
• "segfault compiling media-gfx/imagemagick-6.5.7.0" Page:1
• "boinc segfault" Page:1
• "60 GB Hard Disk partition problem on Ultra 10" Page:1
• "Case insensitive CIFS doesn't works" Page:1
• "ata_id[536] unable to open /dev/.tmp_block-22:0" Page:1
• "KDE not for SPARC any more?" Page:1
• "Which gcc profile?" Page:1
• "Problems Tweaking my SunFire V100" Page:1
• "chrooting on gentoo-sparc64-2005.0-20050717.tftpboot" Page:1
• "help with a hpt366 ide controller and devalias" Page:1
• "Can't boot install CD: can't mount /dev/loop0" Page:1
• "FreeBSD" Page:1
• "Bus error when starting Firefox 3.0.13" Page:1
• "Gentoo Sun Blade 2500 hang after booting with kernel 2.6.30" Page:1
• "Gentoo on Sun Blade100: freezes while booting" Page:1
• "Bus errors killing emerge" Page:1
• "PHP 5.2.10 bug with date("Y")" Page:1
• "Kernel memory allocation" Page:1
• "Sun Microsystem" Page:1
• "Tar Portage failing" Page:1
• "X.Org X Server 1.5.3 upgrade problems" Page:1
• "X.Org X Server 1.5.3 upgrade problems" Page:2
• "My new install boots perfectly, but no keyboard." Page:1
• "[SOLVED] New Ultra 2 install- kernel problem." Page:1
• "KDE4 on Sparc" Page:1
• "LDOM-stuff in SPARC-autobuilds" Page:1
• "init hangs after 'Caching service dependencies'" Page:1
• "system stops booting" Page:1
• "gentoo on leon3 (SPARC V8), loading shared libraries fails" Page:1
• "SunBlade 100 does not posts" Page:1
• "[SOLVED] Compiler problem" Page:1
• "[SOLVED] DHCPCD problems" Page:1
• "Serial (LOM) displays invalid characters when init kicks in" Page:1
• "Not able to compile kernel on sunfire 280r" Page:1
• "[SOLVED] Silo Woes" Page:1
• "V490 hangs when booting installation CD (Gentoo 2008.0)" Page:1
• "IVTV and PVR-500 on SPARC" Page:1
• "installcd 2008.0 cant find sd disks on fire 210" Page:1
• "Sun Fire V100 without the System Configuration Card SCC" Page:1
• "[keybordless] [sun ultra 5]pxe boot possible ?" Page:1
• "Gentoo LiveCD on Sun Fire v240" Page:1
• "SunBlade 1000 - ATI Rage - Out of Scan Range [ABANDONED]" Page:1
• "ntp / frequency error exceeds tolerance 500 / Sun Blade 100" Page:1
• "sparcy64 sun4u using 32 Bit compilter" Page:1
• "Can't get files from network to local disk" Page:1
• "SOLVED -Getting " and @ the right way round on a UK keyboard" Page:1
• "Purchase advice for Sun computers" Page:1
• "Problems booting gentooo installcd 2008.0 sparc on V210" Page:1
• "Two Ultra5s, one copied install" Page:1
• "Old Machines, new life with issues/question" Page:1
• "Various network issues with an Enterprise 4500" Page:1
• "Getting the gentoo-sources-2.6.27 for SunBlade 1000 [SOLVED]" Page:1
• "-mvis cflags" Page:1
• "2008.0 on T5120" Page:1
• "Network problem: NICs won't rise and have MAC 000000000000" Page:1
• "How to use Gentoo box as Jumpstart server to install Solaris" Page:1
• "Qla2xxx: Initramfs no longer required" Page:1
• "gcc (ERROR: sys-devel/gettext-0.17 failed)" Page:1
• "Setting up Silo on an Ultra V [resolved]" Page:1
• "Gentoo on T5240" Page:1
• "Kernel Version" Page:1
• "Fire V100 serial console [SOLVED]" Page:1
• "Gentoo new Sparc Release installation problems" Page:1
• "[SOLVED] memory address not aligned at boot in SUN BLADE 150" Page:1
• "Can't compile gentoo-sources-2.6.25-r6" Page:1
• "Installing on a SunBlade 100 using an Intel keyboard?" Page:1
• "Installing Gentoo on a Sun Ultra 10 [UltraSPARC, OLD comp]" Page:1
• "Kernel 2.6.25 compile error "-m64" ?" Page:1
• "Kernel path question" Page:1
• "problem booting enterprise 4500 with PCI board" Page:1
• "64-bit on Sparc??" Page:1
• "Install on SunFire 280r - please help" Page:1
• "Emerge hosed on 3 Spark boxes. (Fixed)" Page:1
• "Error trying to configure Kernel on Netra T1 105" Page:1
• "Xorg and kernel 2.6.24-gentoo-r4 problem on Ultra5" Page:1
• "Cannot update PROM on a Netra T1 105" Page:1
• "Sun Blade 100 Smart Card Reader" Page:1
• "Installing on Ultra60, stuck after chroot (kernel too old)" Page:1
• "[Help] Can Gentoo be installed in Sun Ultra 25?" Page:1
• "Error from amule on Sparc Ultra5 - GTK problem?" Page:1
• "Ultra 5 VX100 Boot problem[SOLVED]" Page:1
• "silo boot raid1" Page:1
• "Trouble getting a serial console on a V120" Page:1
• "gtk crashes" Page:1
• "LOM from within Gentoo" Page:1
• "xorg, creator and widescreen?" Page:1
• "Just wondering.." Page:1
• "[LDOMs] Installing gentoo in a LDOM" Page:1
• "fdisk warning: error 22 after mdadm" Page:1
• "2007.0 fails from boot cdrom with V880" Page:1
• "Clearing MBR and booting default drive" Page:1
• "Weird hang problem on a niagara machine" Page:1
• "Kernel unaligned access on Ultra5" Page:1
• "Problems installing second Hard Drive" Page:1
• "Nautilus crashgin" Page:1
• "Hard-drive advice..." Page:1
• "Sun Chimera card" Page:1
• "Bus error after upgrading" Page:1
• "Minimal Boot CD 2007.0 does not work on E450" Page:1
• "CONFIG_SUN_MOSTEK_RTC= 2.6.23-gentoo-r3" Page:1
• "Openoffice [solved]" Page:1
• "Random OpenSSH session hangs on Ultra5" Page:1
• "iproute2: Bus Error on Ultra/5 (sparc64)" Page:1
• "usb/ide/sata combo card and Ultra5" Page:1
• "Multiple Happy Meal NIC Problem" Page:1
• "Virtualizaton for Sparc" Page:1
• "SPARC and libnjb" Page:1
• "SPARC and PCMCIA" Page:1
• "Using MPT on Sparc? [SOLVED]" Page:1
• "Can't boot after install." Page:1
• "PCI-SUN4V: strange virtual-dma size" Page:1
• ""Booting Linux..." and then system reset [using 2007.0]" Page:1
• "Ultra 60 USB Keyboard" Page:1
• "SOLVED : Ultra 5 emerge -e system fails on kbd-1.13-r1" Page:1
• "Free Hardware in MA: Sun Netra T1 systems and other stuff" Page:1
• "SunFire 280 and boot device..." Page:1
• "[SOLVED] Problems installing on a Blade 150" Page:1
• "How to boot any sparc (32) installer? (2005.1/ 2006?)" Page:1
• "Problems with gcc after update" Page:1
• "Arch Testers (AT) needed for sparc" Page:1
• "Keyboard problem after upgrade to modular X server" Page:1
• "[SOLVED] Sun Blade 1000 boot trouble" Page:1
• "Ultra 10 install problem" Page:1
• "[solvedish] Can't change resolutions on Creator3D" Page:1
• "multilibbing" Page:1
• "I borked binutils. . .no physical access to machine" Page:1
• "Silo seems not to be writing on the disk" Page:1
• "OpenOffice..." Page:1
• "Gentoo on Ultra Enterprise 4000" Page:1
• "First time install on Sun Ultra 5 - hangs on booting linux" Page:1
• "[silo]"Cannot find /silo.conf " when rebooting" Page:1
• "[SOLVED] emerge problem?" Page:1
• "stage2 install fails on pcre compile (emerge system)[solved]" Page:1
• "2.6 kernel version of the tftpboot image ?" Page:1
• "Install Problem" Page:1
• "sensors @ e450" Page:1
• "Ultra 80 Fans" Page:1
• "install gentoo on ultra60 problem" Page:1
• "root on lvm2: can't find logical volumes" Page:1
• "Sound with a V100 Server?" Page:1
• "Devfsd won't build - udev needed?" Page:1
• "Ebuild request: bothunter" Page:1
• "Ultra 60 Parts giveaway" Page:1
• "sparc64 and capi" Page:1
• "kde-base/kdeaddons-3.5.5 fails on SunBlade 1500" Page:1
• "Key mappings on an ultra 5, kernel 2.4" Page:1
• "retire an Ultra30?!" Page:1
• "Gentoo on Sparc (32-bit)" Page:1
• "Kernel bug vs hardware problem: Need people to do a test" Page:1
• "Support for Ultra 25?" Page:1
• "changing net boot server from 2006.1 to current TFTP Topic" Page:1
• "sshd error: channel 0: chan_read_failed for istate 3" Page:1
• "f-spot (mono) on sparc (ultra5)" Page:1
• "Can I install Gentoo on Sparc32 (SS20)?" Page:1
• "Can't boot from CDROM on SS20." Page:1
• "Ultra10 onboard video problem" Page:1
• "GCC 3 and sparc 2007.0?" Page:1
• "K3B on Ultra5 with DVD burner [SOLVED]" Page:1
• "Netra X1 and 2.6" Page:1
• "[Solved]Ultra 5 333 MHZ can't get Gentoo to install" Page:1
• "tftpboot image" Page:1
• "SunFire V120, SILO not work" Page:1
• "Simple answers to simple problems - read before posting" Page:1
• "Ultra5 Boot Blues" Page:1
• "Boot stuck on "Booting Linux..." [SOLVED]" Page:1
• "Stuck on Installation after kernel compile" Page:1
• "DRI on mach64 on sparc (ok, ok... its an experiment!)" Page:1
• "<solved> boot cdrom error" Page:1
• "<sloved> Master reset ???" Page:1
• "kernel: unable to compile? [SOLVED]" Page:1
• "Problem mounting floppy" Page:1
• "WiFI on sparc?" Page:1
• "emerge xorg-x11 blocked by "media-libs/mesa-6.5.1-r1 failed"" Page:1
• "emerge xorg-x11 blocked by "media-libs/mesa-6.5.1-r1 failed"" Page:2
• "Warzone2100 on Sparc: threading problem?" Page:1
• "Can't emerge vnc" Page:1
• "Considering Sun Blade 100: Hardware RAID card?" Page:1
• "Can ndiswrapper works?" Page:1
• "Advice needed on larger disk drive for Ultra 5" Page:1
• "Ultra 60 memory upgrade" Page:1
• "Optimum make.conf values" Page:1
• "Printing over ethernet on my Ultra2[solved]" Page:1
• "Free: 73g Seagate FC drives - Blade 1000/2000 etc" Page:1
• "Easy way of creating an ql2200 fw loader initrd for SB2000?" Page:1
• "Keeping the sparc32 arch up ;)" Page:1
• "Data Access Exception [solved]" Page:1
• "2.6.20r5 wont detect 2nd processor on U60" Page:1
• "SPARC-NEWBE; .config and Tips for Blade 1000 [SOLVED]" Page:1
• "Gentoo Linux 2007.0 released" Page:1
• "SparcStation 5 + Gentoo + Disk Space [solved]" Page:1
• "Storage A1000" Page:1
• "Sparc64 gets to "Booting Linux..." then crashes" Page:1
• "qlogic isp scsi controller install issues." Page:1
• "sparc esp scsi driver rewritten in 2.6.22" Page:1
• "sparc root partition on software raid device" Page:1
• "gcc... Bus error" Page:1
• "gcc 4.1.1 and gcc-config [solved]" Page:1
• "Problem with filesystems on non UTC clock" Page:1
• "Kernel Question" Page:1
• "2.4 -> 2.6 upgrade, kernel too big [solved]" Page:1
• "Problem with booting on SunFire 280R" Page:1
• "gentoo offline update" Page:1
• "sparc64 package CD" Page:1
• "READ, IT's IMPORTANT: gentoo-sources-2.6.20-r4 going stable" Page:1
• "OSS ALSA alsa-oss" Page:1
• "system starting to freeze/crash" Page:1
• "Kernel Panic after first reboot on SPARCH 64 NETRA T1" Page:1
• "Digest Verification Failed after emerge --sync" Page:1
• "Cs4231" Page:1
• "SparcStation 20/QFE SMP broken" Page:1
• "hme0 aliased as kernel > 2.6.17" Page:1
• "FC-AL port on Sun Blade 2000" Page:1
• "Java on SPARC Linux" Page:1
• "Strange X11 issue, Red and Blue switched" Page:1
• "Gentoo on PrimePower200" Page:1
• "Something wrong instaling Gentoo over Sunblade 150" Page:1
• "Toolchain problems [SOLVED]" Page:1
• "Sun Blade 150 install" Page:1
• "Gentoo on Blade 2000" Page:1
• "atfb firmware not loading, but i have 108604 patch." Page:1
• "[SOLVED] Networking not working" Page:1
• "Installing Gentoo on an E4500" Page:1
• "RAID boot issue" Page:1
• "[solved] gcc-sparc64, kgcc64 and binary host" Page:1
• "Processor upgrade benchmark results" Page:1
• "why Cpu0Bogo only 11.12 ?" Page:1
• "[SOLVED] Disk Partition problem" Page:1
• "X11 / xorg-server-1.2.0 ultra5/ati mach64" Page:1
• "sun keyboard wasn't working(type5)" Page:1
• "sparc64 - why 64bits Kernel and 32bits system" Page:1
• "Netboot install Sun Blade 2000 - missing apps in image?" Page:1
• "Processor upgrades on Ultra 60" Page:1
• "How often should I upgrade the kernel ?" Page:1
• "Gentoo on a Sun Ultra 10?" Page:1
• "Gentoo on an Ultra 45" Page:1
• "2.6.17-r9 < 3.5MB wont boot, just hangs...." Page:1
• "Problems booting livecd on a sparc ultra10" Page:1
• "gcc-sparc64 and kgcc64" Page:1
• "PCI IDE card recommendations for Ultra 10 [solved]" Page:1
• "cant boot any kernel > 2.6.17" Page:1
• "Setiathome" Page:1
• "Cloning Gentoo too diff identical Netra's T105" Page:1
• "Filesize does not match recorded size -- timezone-data-2006p" Page:1
• "No video on Ultra 10" Page:1
• "Next step after netboot" Page:1
• "Need to install using only a serial connection (no monitor)" Page:1
• "MySQL Upgrade + gnupg" Page:1
• "Slow SCSI disks" Page:1
• "Ultra 2 Locks Up Compiling glibc" Page:1
• "Enterprise 3500 ok for Gentoo?" Page:1
• "sparc ultra issues with keyboard and mouse [solved]" Page:1
• "having problem putting gentoo on SPARC Ultra 1" Page:1
• "Dreadful E4500 U160 SCSI peformance on PCI I/O board" Page:1
• "Why is my 64bit executable so large?" Page:1
• "Problem with Sun Ultra 5" Page:1
• "glxgears jerky?" Page:1
• "Problems finding disk" Page:1
• "xorg 7.1.1 suncg6 driver and 2.6.x kernels" Page:1
• "cg6 xorg 7.1.1 xorg.conf" Page:1
• "Xorg.conf for Xorg 7.1.1?" Page:1
• "No video on Ultra 2?" Page:1
• "Kernel load, but won't boot" Page:1
• "Partimage restore of root partition screws disk geometry !!!" Page:1
• "Partimage on Sun box ?" Page:1
• "gcc upgrade 3.4 to 4.1" Page:1
• "System hangs during shutdown" Page:1
• "Finally got it !! Now where is X?" Page:1
• "Gentoo 2.4 kernel for Sparc install CD [SOLVED]" Page:1
• "Bus error when using mysqldump" Page:1
• "Problem with SMP on 220R [SOLVED]" Page:1
• "Can Gentoo fdisk create disk partitions for Solaris to use?" Page:1
• "sparc-sources or vanilla sources? sunblade 100? [SOLVED]" Page:1
• "New Install, hangs on boot [SOLVED]" Page:1
• "video card question [SOLVED]" Page:1
• "Partimage of Sun disk" Page:1
• "which kernel sources to use for a Blade 100 [SOLVED]" Page:1
• "SILO doesn't work" Page:1
• "SILO and Live CDs - Please help!" Page:1
• "Ultra 5 Disk Issues" Page:1
• "Custom liveCD for sparc ???" Page:1
• "SCSI help with Netra t1" Page:1
• "chroot and low level SCSI problem [solved]" Page:1
• "Error during boot of new kernel ???" Page:1
• "sparc64 on ultra10, want to use a 2.6 kernel" Page:1
• "Recommend a dual channel U160 controller for an E4500" Page:1
• "partimage on a sparc machine? [SOLVED]" Page:1
• "Mounting a boot CD, then changing it, and re-burning - Help?" Page:1
• "power off" Page:1
• "/etc/fstab entry for CD on Sun Sparc [SOLVED]" Page:1
• "e450 and a 2.6.18-r2 kernel" Page:1
• "Kernel compile - undefined reference" Page:1
• "GPL'd Java" Page:1
• "Sun SunFire V100" Page:1
• "Installing Gentoo on Netra T1 200 [SOLVED]" Page:1
• "kernel wont boot - kernel panic - not syncing. [SOLVED]" Page:1
• "Silly Q. Which distro is most used on SPARC?" Page:1
• "Sun disklabel? Do I have to use it? YES! If you wanna boot." Page:1
• "Install went OK - new kernel wont boot !!! [SOLVED]" Page:1
• "cat make kernel" Page:1
• "Roadblock 2.4 vs 2.6 kernel" Page:1
• "Modified liveCD to boot sparc machine....." Page:1
• "New gentoo 2006.1 on Sparc SunBlade 2000 ?" Page:1
• "Tricks to Using LOM Console?" Page:1
• "HD for Sparc5?" Page:1
• "partitions disappear on B100s" Page:1
• "SILO - Is this how it works from CD?" Page:1
• "RAMDISK error - Using SILO" Page:1
• "Gentoo 2006.1 on T2000" Page:1
• "Gentoo 2006.1 Package CD for SPARC64" Page:1
• "tftpboot with Cassini 10/100/1000 driver" Page:1
• "Help with Sun Ultra 5 install" Page:1
• "Gnome 2.16" Page:1
• "Netbooting a Sun Fire T1000" Page:1
• "[RESOLVED] Ummm, bad?" Page:1
• "netra x1: SCC help" Page:1
• "Udev or devfsd?" Page:1
• "Ultra 5 crashed?" Page:1
• "Gentoo on Ultra 10" Page:1
• "Firmware password" Page:1
• "Console messages [solved]" Page:1
• "Unimplemented SPARC system call on boot of 2.6.17r8" Page:1
• "No Keyboard - Sunblade 100 - 2.6 kernel [SOLVED]" Page:1
• "Gentoo 2006.1 + Blade1000 didn't work, Ubuntu SPARC works..." Page:1
• "install on ultrasparc 10" Page:1
• "tftpboot images on JavaStation - results" Page:1
• "kexec call" Page:1
• "SUN Netra 240 - gcc-3.4.6-r1 - Build error [solved]" Page:1
• "Human intervention always required on boot (Blade100, RAID1)" Page:1
• "Gentoo 2006.1 - Blade 100 - Kernel booting..." Page:1
• "ultra 10 acx111 wireless" Page:1
• "U10 or Blade 100 ?" Page:1
• "Modular Xorg on E250" Page:1
• "Kernel panic on new SPARC64 install." Page:1
• "[Solved] emerge libpcre fails on Sparc32" Page:1
• "2006.1 cdrom boot error [SOLVED]" Page:1
• "ethernet problem??" Page:1
• "New Install on Ultra 5 /etc/silo.conf Question" Page:1
• "Sun E450 - how to install?" Page:1
• "Linux kernel on sparc SUN E3500" Page:1
• "Bug introduced in sys_getdomainname() in 2.6.18-rc3" Page:1
• "how to user mask xorg 7" Page:1
• "installing gentoo on my sun blade 100" Page:1
• "Screen Artifacts on Ultra2 running 2.6.17 - in *console*" Page:1
• "tips and hints welcome for Ultra 5" Page:1
• "2.6 kernel panicked" Page:1
• "Problems with LVM device nodes after update" Page:1
• "2006.1 hung my Ultra10" Page:1
• "Sun Ultra 10 2.6.17 Kernel Install Error" Page:1
• "xf86-input-evdev-1.1.2-r1 Question" Page:1
• "2006.1 Installation CD - Ultra2 - Module is unknown" Page:1
• "Configuration Question" Page:1
• "Problem with kbd" Page:1
• "!!! All ebuilds that could satisfy ">=sys-kernel/linux-head" Page:1
• "Error emerging icewm" Page:1
• "[Solved] emerge of mesa-6.5-r3 failing" Page:1
• "Need help upgrading to 2006.0" Page:1
• "The error after reboot on ultra 60" Page:1
• "[Solved] Migrating to modular X fails emerging libX11-1.0.3" Page:1
• "Silo Oddity" Page:1
• "Blade 100 - very bad timekeeping" Page:1
• "Ultrasparc + 2.6 kernel [RESOLVED]" Page:1
• "Ultra 5 + type 5C + 2.4.32 + xorg 6.8.2" Page:1
• "[hme] onboard hme ethernet issues (solved)" Page:1
• "[kernel] upgrade to 2.6 > keyboard not detected (solved)" Page:1
• "Ultra 5 with kernel 2.4.32 - TCP does not work" Page:1
• "New installation boot fails on USB Device" Page:1
• "[SBUS] equivalent for pciutils? (solved)" Page:1
• "/etc/modules.devfs has not been generated [solved sort of]" Page:1
• "OpenBoot Update under Linux?" Page:1
• "New Install Question" Page:1
• "Sun Blade 100 problems [solved]" Page:1
• "Gentoo Installer for Sparc?" Page:1
• "Ultra 10 won't boot. "File not executable"." Page:1
• "building xorg-server-1.1.1 fails, error in kernel header?" Page:1
• "New install fails to boot." Page:1
• "SPARC Success / Questions [solved - thanks!]" Page:1
• "Solved : Sparc NICs have the same MAC address" Page:1
• "PER_CPU: Invalid layout" Page:1
• "Java 1.5 for sparc?!?! please!!" Page:1
• "Installing gentoo on SUN 220R - wont boot - Kinda solved" Page:1
• "Gentoo+Ultrasparc+software RAID - proceed or go to NetBSD?" Page:1
• "silo for RAID1 in chroot environment [RESOLVED]" Page:1
• "2.6.17 kernels and xdm" Page:1
• "Install Gentoo 2006.0 Universal on SUNBLADE 2000 ?" Page:1
• "german sun type 5 keyboard (kernel 2.4.32) and xorg 7.1" Page:1
• "2.6 netboot images [solved]" Page:1
• "SunBlade 2000 - No video Card" Page:1
• "Difficulities building linux-2.6.17-gentoo-r2" Page:1
• "Ultra 60 - Fast Data Access MMU after install" Page:1
• "My Ultrasparc Box - Replace Solaris?" Page:1
• "Trying to get 2006.0 installed on Ultra5..." Page:1
• "Kernel Confusion" Page:1
• "Ultra 5 with PCI XVR-100" Page:1
• "Need a 2.6 iso image to boot from CDROM!!" Page:1
• "Can't boot 2006.0 on 280r" Page:1
• "Oh my god help me" Page:1
• "[SILO] problem for install on software RAID0 (solved)" Page:1
• "SOS! SunBlade2000-UltraSparcIII+ 'kernel config' I m puzzled" Page:1
• "cant emerge update because of gentoo-sources mask" Page:1
• "How to dual boot my Blade 1000" Page:1
• "gentoo-sources Stable on SPARC at long last" Page:1
• "Using a Sun Netra D130 with Non-Sun Server and Gentoo" Page:1
• "Is there any way to run x86 binaries on "Gentoo on Sparc"?" Page:1
• "Yet again, I've screwed the install up!" Page:1
• "Netboot doesn't work (Sun Ultra1)" Page:1
• "strange slow ext3 performance?" Page:1
• "Just done my first Sparc install, and it won't boot." Page:1
• "strange xmms kernel messages[SOLVED]" Page:1
• "flash plugin?" Page:1
• "Hardware monitoring on 220R?" Page:1
• "dev-lang/mono on sparc ?" Page:1
• "new IDE controller for ultrasparc10" Page:1
• "Should have known a week earlier, Java..." Page:1
• "Worth it to put linux on a sparc32?" Page:1
• "Ultra5 and Xorg 6.8.2 problem" Page:1
• "rtc not working" Page:1
• "proxychains alternative?" Page:1
• "How do I upgrade my OBP?" Page:1
• "pure 64-bit installation" Page:1
• "distcc on sparc and a pentium4 machine" Page:1
• "unusually high cpu usage of X" Page:1
• "sluggish performance on ultrasparc 10, kernel 2.6" Page:1
• "keyboard map[SOLVED]" Page:1
• "Never managed to install Gentoo on my Sparc, any volunteers?" Page:1
• "sparc ultra 10 keyboard issues" Page:1
• "Can't switch to other vt consoles on Ultra5" Page:1
• "kernel config for ultrasparc[SOLVED]" Page:1
• "Kernel Compile Error" Page:1
• "2006.0 Universal CD causes Fast Data Access MMU Miss" Page:1
• "Gentoo and SunRay on Sparc" Page:1
• "Network Bridging" Page:1
• "[RESOLVED] first stage boot failure" Page:1
• "[SOLVED] liboil or gstreamer problem?" Page:1
• "Sparc Ultra 10 SCSI symbios logic 22802" Page:1
• "X.org 7.0 + direct rendering" Page:1
• "Sparc Gentoo IRC server?" Page:1
• "xorg-x11 7.0.0 modular on SPARC? --SOLVED--" Page:1
• "Is Sparc32 Gentoo dead?" Page:1
• "SunE250" Page:1
• "How to fix misaligned assignment statements in the source" Page:1
• "Time format seems to wrong?" Page:1
• "netboot woes" Page:1
• "Compiled Darwin Streaming Server but not able to to stream" Page:1
• "Graphical install (LiveCD?) ISO for sparc64?" Page:1
• "How to install egcs compiler?" Page:1
• "E450 and RAID" Page:1
• "Image from one HD to another?" Page:1
• "ultra sparc 1 question" Page:1
• "Kernell Panics" Page:1
• "Java, gentoo, SRB" Page:1
• "Compilation Problem - collect2: ld returned 1 exit status" Page:1
• "Bind Seg Fault on E450" Page:1
• "Buffer I/O error on device sdX on 2.6 kernel system" Page:1
• "RAM for E450" Page:1
• "Version of SILO on install-sparc64-universal-2006.0.iso?" Page:1
• "modules.conf newer than modules.dep error [SOLVED]" Page:1
• ""No serial devices found, bailing out" at startup" Page:1
• "Sparc handbook fstab..." Page:1
• "Gnome Volume Control refuses to control the volume" Page:1
• "Failure to emerge" Page:1
• "Sun Ultra Sparc 30" Page:1
• "Partitioning scheme for RAID array" Page:1
• "gcc build problem upgrading to 3.4.6-r1" Page:1
• "Matrox g200 PCI / ATI Rage Pro PCI" Page:1
• "Can't see "Sun Storedge D2 Array"" Page:1
• "unable to build kernel on ultra5 [solved]" Page:1
• "SPARC -- install-sparc64-minimal-2006.0.iso --" Page:1
• "Xorg and accelerated video on a Radeon?" Page:1
• "glibc detected memory corruption with sparc-sources" Page:1
• "Sparc Loader ISO? (Or how do I put solaris on?)" Page:1
• "Calculating module dependencies ...Error:" Page:1
• "Snort alternative for U5 network traffic monitoring?" Page:1
• "SOLVED - Cannot boot into gentoo *noob alert*" Page:1
• "xorg-x11 7" Page:1
• "System locks (Ultra 60)" Page:1
• "RAID Problems on boot Kernel: 2.4.32-sparc-r2" Page:1
• "Change CHOST: sparc -> sparc64 ?" Page:1
• "Network performance on UltraSPARC 5" Page:1
• "UltraSparc II 440 Unable to communicate" Page:1
• "New install on Ultra 10 requires working /etc/fstab." Page:1
• "Image too large for Sparc 5? [SOLVED]" Page:1
• "tftpboot Netra X1 - no mknod ? [SOLVED]" Page:1
• "General - What are you running on your SPARC?" Page:1
• "OpenGL with Creator 3D" Page:1
• "VIA VT6120/6121/VT6122 GE NIC, kernel panic" Page:1
• "Ultra 60 keyboard and mice problem [solved]" Page:1
• "Kernel Panic: VFS: Unable to mount root fs on 03:01" Page:1
• "GigE NIC for E250" Page:1
• "Urgent: will this RAM work with U5/U10?" Page:1
• "perl-5.8.7 unable to make" Page:1
• "Trashed my U60" Page:1
• "Gentoo 2006.0 on sunblade150" Page:1
• "Help with Old Ultra10 and Xorg keyboard config [solved]" Page:1
• "Illegal Instruction when trying to boot the kernel" Page:1
• "Gentoo 2006 on Ultra 5 hangs on installation" Page:1
• "SunPCI II and Linux" Page:1
• "UFS kernel write in 2.6.15 onwards? Vanilla sources..." Page:1
• "Promise Fasttrak66 via Magma PCI expansion [works!]" Page:1
• "Gentoo on a sun UltraSPARC 10" Page:1
• "Remapping, Registering, Booting ... Dead" Page:1
• "What -mcpu= setting should I use for UltraSPARC IIIi" Page:1
• "newbie sparc question" Page:1
• "Installing on UltarSparc" Page:1
• "/usr partition full" Page:1
• "Ultra 5 booting from a disk on module?" Page:1
• "Reiserfs?" Page:1
• "Emerge cacti failed" Page:1
• "Ultra 10 PROM through USB keyboard? [SOLVED]" Page:1
• "silo raid1 mbr copy" Page:1
• "glibc-2.3.6-r3 segfaulting w/nptl + hardened" Page:1
• "Any gentoo folks taken Sun up on the 60day eval T2000?" Page:1
• "X cannot load module ffb" Page:1
• "Can't open boot device-Sparc64-Ultra60-after install" Page:1
• "solaris & gentoo (other linux) on my sun" Page:1
• "[2006.0 + 2.6 + unstable] successful on SunFire V100" Page:1
• "booting hangs on a SunBlade2500" Page:1
• "Sun Blade 2000" Page:1
• "2006.0 on SunFire V120 (CD-less + netboot + Internet-less)" Page:1
• "pci sata controllers on sparc? maybe?" Page:1
• "Sparc install emerge dhcpcd fails" Page:1
• "Xorg not finding PCI device on 2.6 kernel - Solved for 6.8.2" Page:1
• "gcc r4 status" Page:1
• "sparc 2006.0 live-cd" Page:1
• "flags and 64bit" Page:1
• "SOLVED: gamin vs famd?" Page:1
• "Does a sparc64 graphical installer exist?" Page:1
• "SOLVED: Emerging SILO overwrites silo.conf??" Page:1
• "[solved] Problems during initial untar Input/out" Page:1
• "Blade 1000 and 2.6.15 kernel hanging" Page:1
• "Software raid and 1000Mbps on a U5?" Page:1
• "emerge fluxbox fails on Ultra 10, 2.4 kernel" Page:1
• "Final problem with Gentoo install on Netra T1 105" Page:1
• "[solved] ultra 2: obp freezes" Page:1
• "run on UltraSPARC IIIi ?" Page:1
• "[solved] compatibility question" Page:1
• "[solved] raptor gfx - yellow trails on xorg" Page:1
• "Ultra 60 Boot issues" Page:1
• "Sun Ultra1" Page:1
• "Sun Ultra1" Page:1
• "xorg.conf LSA800 Monitor" Page:1
• "dokuwiki not available for SPARC?" Page:1
• "Emerge Silo - Fails: Exitcode 127" Page:1
• "xorg and multiple PCI buses" Page:1
• "Ultra 10 - Usless IDE workaround?" Page:1
• "Is LVM2 on SPARC possible?" Page:1
• "Cherry-poppin' sparc install" Page:1
• "Prom Issues on Sparc Ultra 1 Creator" Page:1
• "Sun Netra X1 not shutting down competely" Page:1
• "Error installing 2005.1 - "No bootable medium found"" Page:1
• "System Hangs, unresponsive, Stop-A doesn't work." Page:1
• "moving from x86 to sparc -> questions" Page:1
• "[solved] Can't mount / fs" Page:1
• "boot error: not enough continuous memory 4 RAMDISK" Page:1
• "Strange Network problem on U60" Page:1
• "udev removes /dev/sda* on boot" Page:1
• "strange boot problem, fb issue probably" Page:1
• "Status of sun4d support?" Page:1
• "Which 2.3 kernel do I use?" Page:1
• "sparc disklabel" Page:1
• "MPICH2 on Sun Blade 100 OK" Page:1
• "It's impossible....." Page:1
• "Installing 2.6 kernel on sun4u architecture with 2005.1 CD" Page:1
• "Signal 11 in X on Blade 1000 w/ 2.6.13" Page:1
• "extremely poor character-IO performance" Page:1
• "/etc/issue" Page:1
• "Parallel Port Printing Problem" Page:1
• "Xorg, kernel and misc questions." Page:1
• "Need urgent help!!!" Page:1
• "Xine lockup" Page:1
• "Possible bug - Gentoo not detecting nic on Blade 100" Page:1
• "Reboot error after installation [solved]" Page:1
• "Can't open boot device, after install - Sun Ultra 10 -" Page:1
• "Unimplemented SPARC system call during boot" Page:1
• "2.6.15-r1 fails on UltraSPARC 5/10" Page:1
• "genkernel failing on 2.4.32 [solved]" Page:1
• "Stange Fan Error on Sun e250" Page:1
• "Kernel Panic - can't mount root, using raid-1" Page:1
• "[Chrooted Install] Is it possible?" Page:1
• "64bit userspace?" Page:1
• "emerge broke -- DEPRECATED call to getvirtual" Page:1
• "Error compiling Open Office 2.0.1 on Ultra 10" Page:1
• "SUN E450 Environmentals - Hardware Monitoring" Page:1
• "Problem installating on SunBlade 1000 from 2005.1 CD" Page:1
• "SS20 support?" Page:1
• "Trying to convert from 2.4.29 to 2.6 kernel(postponed)" Page:1
• "OpenOffice 2.0.1 and Gentoo Linux on Sparc" Page:1
• "SunFire v480 boot problem" Page:1
• "Gentoo on those new Ultrasparc T1 Coolthreads" Page:1
• "PGX64 display probs" Page:1
• "Kaffeine on SPARC" Page:1
• "X1140A gigabit card" Page:1
• "[Solved] E250 sun stops responding when closing terminal ses" Page:1
• "2.6 Kernel on Netra (Sparc64)" Page:1
• "touch command : wrong date" Page:1
• "Creator3D resolution" Page:1
• "Moving to RAID1" Page:1
• "[SOLVED] Fdisk : Unable to open /dev/sda" Page:1
• "noisy fans in linux (sun blade 1000)" Page:1
• "error in silo[sloved]" Page:1
• "Ultra low throughput on Ultra2" Page:1
• "fsck on a raid volume" Page:1
• "emerge --sync --quiet in crontab makes my e250 crash" Page:1
• "Keyboard Problem (not Xorg related) [solved]" Page:1
• "Ultra 10 - adding a bootable SCSI controller" Page:1
• "[solved] mke2fs -j -O dir_index from 2.4 kernel?" Page:1
• "SCSI RAID on Suns" Page:1
• "Finally got my Netra T1 AC200 running" Page:1
• "SB150 or U80 4cpu ?" Page:1
• "Free Sun Ultra 20 workstation" Page:1
• "Netra T1 network problems (solved)" Page:1
• "silo: One-shot boot of a new kernel and then back to default" Page:1
• "LEON2 SPARC Processor" Page:1
• "Kernel still to large after strip -R" Page:1
• "Sun Enterprise 450 .config for gentoo" Page:1
• "Sparc Ultra 10 NIC - Gentoo installation problems" Page:1
• "Ultra 5/New HD - After reboot OBP tries to netboot [SOLVED]" Page:1
• "There are only 32 f registers; [0-31] (libmpeg2) [solved]" Page:1
• "Newbie to Sparcs: Pitfalls?" Page:1
• "ERROR: sys-apps/sysvinit-2.86-r3 failed." Page:1
• "Serial Console Connection" Page:1
• "Masked packages under sparc" Page:1
• "solaris binary stuff on gentoo ..? .." Page:1
• "unable to compile xorg-x11" Page:1
• "Are there Sparc Binary Packages?" Page:1
• "2.6 broken on sparc64" Page:1
• "Profile for 2.6 kernel?" Page:1
• "About to install sb100 , with pci realtek 8139, home router" Page:1
• "No Kbd again" Page:1
• "java stability" Page:1
• "Games for Solaris/sparc?" Page:1
• ""No INIT Found. Try Passing INIT=OPTION TO KERNEL"" Page:1
• "2.6 kernel wierd display output." Page:1
• "Installing from a swap partition" Page:1
• "CS4231 / XMMS Garbled Sound [Solved!]" Page:1
• "CS4231 / XMMS Garbled Sound [Solved!]" Page:2
• "Sun's original black-on-white console" Page:1
• "X on Sun Blade 2000" Page:1
• "Links2 Download / Viewing Problem" Page:1
• "Cannot find /vmlinux" Page:1
• "CPU 1 illegal instruction" Page:1
• "First boot Netra T1 afterinstall: locks mounting net filesys" Page:1
• "Davicom Ethernet Problem on 2005.1 SPARC Live CD" Page:1
• "SB1000 750mhz .. performance gain from SMP ?" Page:1
• "[RADEON] problem with ati radeon on sunblade 1500" Page:1
• "[SILO] Fast data access mmu miss" Page:1
• "hardware advice" Page:1
• "Civilization call to power - loki game" Page:1
• "error in Xorg on my Enterprise 450" Page:1
• "[Resolved]Problem with Silo on an Enterprise 450" Page:1
• "C code example for -funswitch-loops" Page:1
• "Small difficulty - PM2 fbconsole on E250" Page:1
• "Bus error compiling dev-php/php-4.4.0-r1 on Sparc UE2" Page:1
• "What happened to sparc32?" Page:1
• "No keyboard on Ultra1 with 2.6 gentoo-sources" Page:1
• "Sun Sparc 60 xorg.conf problem" Page:1
• "Can openmosix work on sparc" Page:1
• "Gentoo on Netra X1" Page:1
• "HowTo: HighPoint RR 1820A Sata" Page:1
• "Video Card setting for Gnome" Page:1
• "Sun Type 6 Keyboard" Page:1
• "[SOLVED] emerge diffutils failed" Page:1
• "[Sparc64] Error at boot after installation" Page:1
• "HighPoint 1820A on Sparc?" Page:1
• "Server temperature: silly question #1" Page:1
• "Last bootable 2.6 kernel on Blade1000?" Page:1
• "ide(ali) dma timeouts" Page:1
• "OpenOffice-Ximian 1.3.16 error whil compiling genconv_dict" Page:1
• "failed nohup emerge --emptytree system > ./nohup... [solved]" Page:1
• "Sun Quad Gigaswift Ethernet Cards (QGE) on Sparc" Page:1
• "Emerge and other commands do not work" Page:1
• "No console output after boot [solved]" Page:1
• "Garbage on edge of screen w/ Ultra 10" Page:1
• "wishlist" Page:1
• "profiles 2005.0 vs. 2005.1 on sparc64 [solved]" Page:1
• "What are you running on your sparcs?" Page:1
• "installation problem step 6 chroot" Page:1
• "bt878 Wintv Support under 2.4.31-sparc" Page:1
• "OOo2 for SPARC?" Page:1
• "Software RAID on SPARC" Page:1
• "installing on ultra 10, no keys or monitor" Page:1
• "Netra T1 build failed" Page:1
• "Kernel 2.4 Build Fails on Netra T1[SOLVED]" Page:1
• "64-bit" Page:1
• "startx still does not work after the microcode install" Page:1
• "Installing Ultra-10 with EVMS on raid-1 from start" Page:1
• "USB Keyboard on Ultra 60" Page:1
• "SS20, 2Gb drive, 256 megs, Stage 3." Page:1
• "Sparc32 live cd- I'm confused...." Page:1
• "Sun Cable Converters" Page:1
• "ultra10 and mouse" Page:1
• "Netra T1 - Partitioning Weirdness" Page:1
• "Installation on Ultra5" Page:1
• "XVR-100 and Sunblade 150" Page:1
• "changing boot drive on the SPARC bios environment" Page:1
• "2005.1 on Ultra 2E" Page:1
• "Hd update on an Ultra5" Page:1
• "/etc/issue with date-command (kernel 2.6.13)" Page:1
• "Just got an Ultra2, want to upgrade the HD" Page:1
• "No 64b executable support in GCC3.3.5?" Page:1
• "changing openboot output-device" Page:1
• "Linux on Sun Netra X1" Page:1
• "E450 and gentoo" Page:1
• "Kernal Panic" Page:1
• "O/T SCSI for Ultra 10" Page:1
• "NetBeans IDE on Ultra 5" Page:1
• "using one partition for everything" Page:1
• "Courier DNS lookup error" Page:1
• "Boot from scsi cdrom using an ultra1 (SOLVED)" Page:1
• "Ultra 5 kernel muss-ups" Page:1
• "Wrong keymap - sunkeymap and sunt5 don't work" Page:1
• "HELP: Remaster LiveCD install-sparc64-minimal-20050621.iso" Page:1
• "SPARC: Installation Over A Net" Page:1
• "From Solaris to GenToo" Page:1
• "Kernel panic "no init found" on sparc64 w/ software RAID" Page:1
• "Not really a gentoo question, but creator3d graphics in u10" Page:1
• "does LAMP run well in Sun UltraSparc 5?" Page:1
• "dual head xinerama no longer works" Page:1
• "No TCP connections without proxy [SOLVED]" Page:1
• "sparc v210" Page:1
• "How about udev?" Page:1
• "Sparc Classic fdisk errors" Page:1
• "vncviewer connects ok, but doesn't display a screen" Page:1
• "Netra T1 AC 200 : new install and no boot" Page:1
• "custom 2.6.13 kernel" Page:1
• "Sparc Station 20. Can I install Gentoo" Page:1
• "named cannot open /dev/random" Page:1
• "How to enable java on mozilla" Page:1
• "Getting a Sparc-machine?" Page:1
• "stty: standard input: unable to... [Solved]" Page:1
• "Tomcat used on sparc by anyone?" Page:1
• "Ultra 10 Sound" Page:1
• "[solved][ultra sparcstation 5] keyboard pb:correction not OK" Page:1
• "PCI/SCSI Cards Supported By Openboot?" Page:1
• "Drive shows up as a 2GB disk while it is 18GB" Page:1
• "Ultra10 Won't work with monitor 1024x768 resolution.[SOLVED]" Page:1
• "Removing SMP on Ultra10 single proc" Page:1
• "booting wrong drive?? ugh" Page:1
• "Sparc4 Tftpboot weird disk issues" Page:1
• "Inconsistant Console" Page:1
• "Xorg Ultra10 Type5 Mouse but no Keyboard in X[SOLVED]" Page:1
• "Porthole-0.5.0_pre1 testing" Page:1
• "Mix 2 sun 64mb 50ns with 2 compaq 64mb 60ns: shows 192mb! :(" Page:1
• "Ultra 10 Xorg problem" Page:1
• "tuxcards-1.2.ebuild works for SPARC" Page:1
• "tightvnc server on sparc help" Page:1
• "Noob: reformat Sparc Classic, install Gentoo - How?" Page:1
• "LVM of root on install" Page:1
• "FrameBuffer Problem with Blade 100 + Rage XL + Kernel 2.6" Page:1
• "Mount problems [SOLVED]" Page:1
• "Help! Trying to build minimal LiveCD for Sparc64..." Page:1
• "Unhappy with HappyMeal" Page:1
• "All kinds of issues on a Sunblade 150" Page:1
• "I would really like X on my ultra 5...." Page:1
• "installing via tftp images?" Page:1
• "[install-pear-installer] bus error on dev-php/php-4.4.0" Page:1
• "udev-062 and SPARC = Bus Error" Page:1
• "RDI britelite (sun IPX portable)" Page:1
• "2.6 kernel on U5" Page:1
• "[solved] Keyboard on Ultra5 won't "b" with KDE" Page:1
• "sun disk label and ide on sata for U60" Page:1
• "*Desperate* SUN won't boot anymore" Page:1
• "*Desperate* SUN won't boot anymore" Page:2
• "Sun type 5 keyboard on an ultra 10" Page:1
• "Warning, live target 0 not responding to selection." Page:1
• "Figuring out netboot" Page:1
• "kernel-2.6.12-r3 compilation crashing" Page:1
• "sparcstation 20: bootable cd's?" Page:1
• "kernel-2.6.7 on U60 not booting" Page:1
• "Advantage's of Gentoo vs Solaris 10 on a Sparc?" Page:1
• "Sound on an ultra 10, kernel 2.4" Page:1
• "UFS filesystem" Page:1
• "emerge sparc-sources problem" Page:1
• "SCSI data recovery" Page:1
• "Getting hold of a U80 in the UK" Page:1
• "nomachine" Page:1
• "My Ultra 10 is Dead" Page:1
• "installing gentoo without editing the MBR" Page:1
• "Problems emerging cryptsetup" Page:1
• "2.6.12-gentoo-r1 Kernel on a SunBlade 150" Page:1
• "My U5 died, is it a memory problem? Please help!" Page:1
• "Can'g get network card driver loaded on SunBlade150" Page:1
• "sound with kernel 2.6" Page:1
• "sparc ultra 5 with LAMP very slow problem" Page:1
• "Alt/Meta on Type5c keyboard" Page:1
• "How good is sparc?" Page:1
• "Sun keyboard under X.org [SOLVED]" Page:1
• "Success with 2.6.12?" Page:1
• "Can i put my root partition on my pci ide controller?" Page:1
• "ffb_drv is apparently unloved by gentoo-sources-2.6.11-r8" Page:1
• "Can i use any old ram in my Ultra 5?" Page:1
• "How to diagnostic the network card in livecd?" Page:1
• "Sun Blade 150 vs. Sun Ultra 60" Page:1
• "C compiler cannot create executables" Page:1
• "Multiple Hypersparcs - a headache?" Page:1
• "Has anybody sucessfully build sun jdk on sparc?" Page:1
• "kernel compile time on Ultra 60" Page:1
• "Is bootsplash or gensplash work on sparc box?" Page:1
• "Error: the >xfce-base/xfce4-4.0.6 package conflicts with" Page:1
• "Ultra60 root raid0 [Solved]" Page:1
• "Partitioning on Ultra 10 [SOLVED]" Page:1
• "Running sparc64 on 2.6 kernel with 2005.0" Page:1
• "(masked by: ~sparc keyword)" Page:1
• "Installing with no cdrom or floppy" Page:1
• "[SOLVED] sparc-sources-2.4.(29 and 30) - No such file or dir" Page:1
• "Flash player plugin" Page:1
• "Disappearing mount when installing Gentoo on Ultra5 [solved]" Page:1
• "Parallel port problems" Page:1
• "kernel won't boot [Solved]" Page:1
• "anyway to play .rmvb in sparc gentoo?" Page:1
• "Response difference between athlon 2600 and sparc system" Page:1
• "Kernel versions, Gnome 2.10 dm-crypt" Page:1
• "I want to donate my Sun Blade 100 to Gentoo; any takers?" Page:1
• "Install Gentoo on Sun Netra T1 - reboot - not boot [solved]" Page:1
• "Ultra 5 hangs during Gentoo boot" Page:1
• "one hd for gentoo one for storage possible?" Page:1
• "gentoo linux on sun4c (SUN IPX)" Page:1
• "Help! need a binpkg for openoffice" Page:1
• "Snort" Page:1
• "Anyone running gentoo on non-sun sparc?" Page:1
• "Compiling alsa driver on Sun Blade 150" Page:1
• "Good news for the Ultra60 people, SMP too" Page:1
• "Moving ext3-formatted disks from x86 to sparc ?" Page:1
• "INIT: Id "c0" respawning too fast: disabled for 5" Page:1
• "e250 powers off within 1 day... how do i figure out why?" Page:1
• "multi-cpu support?" Page:1
• "cannot mount loop with ext2 partition" Page:1
• "ultrasparc and xorg... nothing to do!" Page:1
• "limitations on using Gentoo on sparc" Page:1
• "put font: KDFONTOP: Function not implemented (sun fire v240)" Page:1
• "KDE 3.4 kicker crashes" Page:1
• "keyboard doesn't work in X11." Page:1
• "Gentoo Linux + HyperSparc" Page:1
• "PROBLEM with SILO GENTOO LIVE CD 2005 on SunFire v240" Page:1
• "[Solved]Problem with kdewebdev-3.3.2-r1" Page:1
• "Gentoo on a sparcServer 10" Page:1
• "Random Illegal instructions and Segmentation faults" Page:1
• "Running Xserver over sparc ultra 60" Page:1
• "Sparc Ultra 5 Install silo hangs on boot" Page:1
• ""!!! [Errno 28] No space left on device" /usr full" Page:1
• "sparc64 drm with radeon 7000/VE, anyone?" Page:1
• "fluxbox won't emerge" Page:1
• "LinNeighborhood ends with "Segmentation Fault"" Page:1
• "Boot problem with Sun v240" Page:1
• "Emerge gnome?" Page:1
• "Gentoo/sparc64 "Sync. out of range" problem on ATI" Page:1
• "xorg pci busid confusion with width of domain field" Page:1
• "2.6 Kernel on Sun Blade 100" Page:1
• "Looking for some tips for gentoo on a Tadpole SPARCbook 3" Page:1
• "problem installing on sun ultra 5: free_all_bootmem()" Page:1
• "kernel compile error[fs/exec.c: In function setup_arg_pages]" Page:1
• "Netra X1" Page:1
• "Anyone have KDE 3.4 running on a SPARC yet?" Page:1
• "automake 1.9.4 problems." Page:1
• "MythTV on Sparc" Page:1
• "can't install *.bin files?" Page:1
• "installing Gentoo 2005.1 on a Sun Ultra 1 ... need advice" Page:1
• "SPARC Sound (dead horse)" Page:1
• "X on Ultra 5 With GDM-20D10" Page:1
• "Xorg Signal 11 failure on Ultra 10 with Elite 3D" Page:1
• "[Solved] Can't use keyboard to login in console" Page:1
• "Experimental tftpboot images issue on SunFire v240" Page:1
• "Gentoo on Ultra 60" Page:1
• "2x E450, + 2x A1000 storedges, any tips before i get started" Page:1
• "b key not working in x" Page:1
• "Linux on UltraSparc III+ SunFire 280R" Page:1
• "Trouble compiling silo" Page:1
• "Linux on UltraSparc III+ SunFire 280R" Page:1
• "thinking of installing Gentoo on a old sun box ...." Page:1
• "xorg-x11, kernel versions, and sun type5 keyboards, sun mice" Page:1
• "need help installing keyboard and mouse" Page:1
• "[SOLVED] Compiler cannot create executables" Page:1
• "emerge bind-9.2.5 fails with machine...not...[FIXED]" Page:1
• "[Solved] Also Having Trouble Installing on an Ultra 5" Page:1
• "FATAL ERROR" Page:1
• "ultra5 dont boot[solved]" Page:1
• "can't login on linux sparc64 2.4.29-sparc" Page:1
• "X-org problem on E420R PGX64" Page:1
• "Ultra5 won't POST" Page:1
• "rsync protocol data stream (code 12) at io.c(189)" Page:1
• "booting problem on ultra 5" Page:1
• "Unable to compile/emerge anything needing executables" Page:1
• "help: info for U10 and lcdproc" Page:1
• "64 bit binaries" Page:1
• "X trouble: hardlocks on U60 and Creator3D" Page:1
• "Two creator 3Ds on ultra" Page:1
• "trouble installing gentoo on ultra 5/10" Page:1
• "installing gentoo 2005 on sparc ultra 5/10" Page:1
• "mkfs.ufs" Page:1
• "[hdparm] configuration for scsi devices ?" Page:1
• "Gentoo won't boot after adding memory (2GB now)" Page:1
• "Simple php / sendmail question...." Page:1
• "Compiling kernel fails on Sparc64/Ultra5" Page:1
• "new to SPARC (but not linux), a few quick questions" Page:1
• "kernel panic" Page:1
• "Keyboard Mapping for 2005.0 Installation" Page:1
• "X troubles on Ultra 80 Expert 3D" Page:1
• "Problem with QFE card" Page:1
• "Multiple Entries in silo.conf" Page:1
• "SPARC Question" Page:1
• "2005.0 on a Sparc station 5" Page:1
• "sound on sun blade 100" Page:1
• "Could not run/locate sparc-unknown-linux-gnu-gcc?" Page:1
• "Apache trouble" Page:1
• "Fast Instruction Access MMU Miss" Page:1
• "Error Emerging kdemultimedia-3.3.2" Page:1
• "xorg-x11-6.8.2 on an Ultra-10 workstation" Page:1
• "infinite loop from 'ls -l' running expect kbd translator" Page:1
• "Snort?" Page:1
• "DVD Burner" Page:1
• "emerge world or emerge system ??" Page:1
• "bootstrap failure on sparc ultra 60" Page:1
• "Installed Gentoo....now it wont boot....." Page:1
• "Backup of system into a stage3 like manner" Page:1
• "Can't boot gentoo" Page:1
• "Serial console on a Sun Netra T1115 and kernel 2.6.11" Page:1
• "sun4d" Page:1
• "USB controller for UltraSPARC1?" Page:1
• "can't compile alsa driver" Page:1
• "Can not boot Live CD" Page:1
• "does anyone have a working mouse in v2.6 on an ultra 60" Page:1
• "error is back, do you know what it is" Page:1
• "fdisk problem. Cant make 80G sun disk [SOLVED]" Page:1
• "logwatch ebuild for sparc?" Page:1
• "E3500 unabel to access disks after initial boot process" Page:1
• "Newbie (sorry) with No Such File or Directory Errors . . ." Page:1
• "Emerge openoffice-ximian ends in an error" Page:1
• "is Gentoo on SPARC stable enough for enterprise use?" Page:1
• "make.conf configuration for multi processor ultra60" Page:1
• "IRC Server on SPARC??" Page:1
• "ultra 60 kernel emerge IO error" Page:1
• "kicker crashes on kde" Page:1
• "PHP PEAR net-www/pears masked ?" Page:1
• "Sun disklabel on 120G SATA drive" Page:1
• "expert3D on ultra 60" Page:1
• "cdrecord problem" Page:1
• "Bot problem on an Ultra60" Page:1
• "SATA on Ultra-30" Page:1
• "Capacity recognized problem with Hard Drive On Sunblade 150" Page:1
• "SparcStation 20 as a thin client" Page:1
• "No NFS Mount capability from the diskless image?" Page:1
• "Sun Type 5c Keyboard" Page:1
• "Getting modeline from OBP" Page:1
• "Sparc64 - 2.4.28 (vanilla-sources) - Ultra5 wont boot" Page:1
• "Openboot "Bad Magic Number" after install" Page:1
• "Can't emerge deep - error about freetype-2.1.8 [RESOLVED]" Page:1
• "Lose web/ftp/rsync randomly with a sparc system" Page:1
• "X on Sun Blade 100" Page:1
• "Sun Ultra10 Questions" Page:1
• "sparc Ultra1 3D Creator 2.6.x issue" Page:1
• "pthreads" Page:1
• "Which 2.6 kernel for E250" Page:1
• "KDE on the Livecd?" Page:1
• "Emerging Analog" Page:1
• "kernel panic on blade 100" Page:1
• "Error loading key mappings- Anybody understand?" Page:1
• "gcc-sparc64 failed to compile [RESOLVED]" Page:1
• "Boot problem - new install on Ultra 2E" Page:1
• "lost X windows, problem loading sunffb" Page:1
• "Let's get some p2p apps stable on sparc" Page:1
• "SMP on sparc32 scheduling problems" Page:1
• "Sun Blade 150" Page:1
• "xorg blues" Page:1
• "kernel compile errors.." Page:1
• "LiveCD 2004.3 Boot Problem" Page:1
• "SunFire v250" Page:1
• "Need help getting davfs working" Page:1
• "Upgraded kernel now V100 won't boot" Page:1
• "How to upgrade the kernel [SOLVED]" Page:1
• "Latest kernel for sparc" Page:1
• "xorg-x11 is eating all my memory" Page:1
• "Hard Drive swapout" Page:1
• "GCC problems" Page:1
• "Blackdown-1.4.1 very unstable" Page:1
• "Two somehow related problems (sound)" Page:1
• "Problem emerging gtk+ [SOLVED]" Page:1
• "E-250 and 2.6.10-r2" Page:1
• "At my wits ends installing gentoo on V100 [SOLVED]" Page:1
• "Xorg screen does not refresh correctly" Page:1
• "spurious new lines sent from prompt from etc-update" Page:1
• "Enable Sound - Sunblade 100" Page:1
• "Emerge System yields no packages" Page:1
• "Sunblade1000 with PGX64 doesn't start X server" Page:1
• "Elite3D - where do I get sunffb from ? [SOLVED]" Page:1
• "Bad keymaps for 2.6.10-r1 on Ultra 5 and Ultra 60, FIXED" Page:1
• "Need cisco vpn client on sparc" Page:1
• "Emerging gentoo-dev-sources 2.6.9" Page:1
• "Booting Live CD on sparc fails: not enough memory!" Page:1
• "1st stage 1 install on Sparc. At Part 6c and no /usr/portage" Page:1
• "Compiler internal error" Page:1
• "Broken "dmfe" network driver in 2.6.9/10" Page:1
• "A coule of questions on Sparc ebuilds and ebuilds - Answered" Page:1
• "Install X on Netra?" Page:1
• "ipvsadm" Page:1
• "fdisk and default start cylinder - differs from x86" Page:1
• "md5sum check FAILED on stage1 file!!!!!!!" Page:1
• "gentoo liveCD on a Netra computer with another OS" Page:1
• "status of gentoo on SB150, Netra X1, and Netra T1" Page:1
• "Exorcise in futility :)" Page:1
• "fdisk ide serius problem" Page:1
• "Using gentoo liveCD for password recovery?" Page:1
• "Xorg broken for Sparc sunffb?" Page:1
• "X on Sun Blade 100" Page:1
• "U10 & sb live! no midi" Page:1
• "1st boot on Netra240" Page:1
• "Xorg on Sun Ultra 5" Page:1
• "ok prompt?" Page:1
• "Openprom Prompt cli question" Page:1
• "linux 2.6 and system freezes" Page:1
• "What package are people running to get kernel 2.6.X" Page:1
• "can someone send me ksysguardd binary" Page:1
• "32 bit vs 64bit... kernel" Page:1
• "E250 Install Issues" Page:1
• "Sun Ultra5 and the 2.6.9 kernel (2.6.9-r14)" Page:1
• "Ultra 5 HDD Size problem" Page:1
• "Problem booting 2.4.28" Page:1
• "Rebuild the kernel problem" Page:1
• "ALSA compilation problem on Sun Blade 100 (2.4.28)" Page:1
• "Ultra 10: which kernel source is the best?" Page:1
• "Sound on an Ultra 5 2.6.7" Page:1
• "need help with SILO" Page:1
• "Ultra 10 HDD size" Page:1
• "Disk Specs for Fujitsu MAN3367MC" Page:1
• "U2 Kernel Compile" Page:1
• "sparc station 10 install" Page:1
• "sun mouse issues with 2.6.9 on ultra5" Page:1
• "IDE speeds on sun hardware" Page:1
• "server blade b100s, no NICs when tftp image is booted? help." Page:1
• "Couldnt open /dev/vc/1 on sunfire v240" Page:1
• "[Semi-OT] Anyone here have experience with sun ray clients?" Page:1
• "Need to resize SWAP partition on a NetraX1" Page:1
• "2.6.10-r2 console issue help" Page:1
• "emerge imagemagick-6.1.3.4 fails with libtool - a solution" Page:1
• "Sunfire V240 quad ethernet problem" Page:1
• "Sun Netra T1125 and SMP 'problem'" Page:1
• "Can't change xorg resolution (Ultra 60 / Creator 3d)" Page:1
• "Memory leak ?" Page:1
• "keyboard errors after install reboot, on kernel 2.4.27-sparc" Page:1
• "openssl will not compile [SOLVED]" Page:1
• "Latest decent kernel for ultrasparcs?" Page:1
• "gcc-3.4.3 [solved]" Page:1
• "Total SPARC noob here..." Page:1
• "Can´t boot Blade 150 from LiveCD SPARC64" Page:1
• "2.6.10 ultra 5 keyboard problems" Page:1
• "ttmkfdir-3.0.9-r2 Won't Build" Page:1
• "Error booting 2004.3 LiveCD on Ultra60" Page:1
• "Gentoo vs. Solaris Performance?" Page:1
• "which pci ide controller on sparc" Page:1
• "Difference, - UltraSPARCII, - UltraSPARCIIi ?" Page:1
• "X11 Questions on Sparc U60" Page:1
• "Tatung axdp Ultra 60 clone motherboard ATX compatible??" Page:1
• "Need help with prelink" Page:1
• "Turn off power management/screensaver?" Page:1
• "Module load failure in xorg-x11 on U2" Page:1
• "Netra T1 100 - no cdrom after reboot" Page:1
• "emerge vim fails - ACCESS VIOLATION" Page:1
• "Upgrading RAM in SPARC 10" Page:1
• "Is this worth the money?" Page:1
• "SATA RAID on Ultra 60" Page:1
• "Mouse on xorg-x11 6.8.0-r3 Doesn't Work [RESOLVED]" Page:1
• "linux-2.4.28-sparc-r3 Won't Compile" Page:1
• "2.6.10 kernel and serial console" Page:1
• "Emerged Fluxbox and SSH wont work now..." Page:1
• "2.6.10 on Ultra 5 (atyfb csync problem)" Page:1
• "tightvnc problem between Gentoo on Sparc from Gentoo on x86" Page:1
• "Problem boot Ultra5" Page:1
• "Quick Question about bugs in the docs" Page:1
• "Text Browser on SPARC other than lynx? [SOLVED: elinks]" Page:1
• "Running Solaris Binary on Linux (both on SPARC Platform)" Page:1
• "Sparc hardware advice" Page:1
• "Mose recent Sparc Live CD" Page:1
• "Fcode sequence resulted in a net stack [RESOLVED]" Page:1
• "xorg on u30 creator3d not working,.." Page:1
• "Hosting domain at home on U60" Page:1
• "How sad is the world....400Mhz UltraSparc II vs 2x200Mhz" Page:1
• "Ultra2 Disk Config & Silo.Conf & FSTAB" Page:1
• "Build bootable CD on sparc" Page:1
• "Can't Change Root Password on UltraSPARC IIi [RESOLVED]" Page:1
• "Problem boot Linux Gentoo on UltraSparc5" Page:1
• "openmosix on ultrasparc" Page:1
• "Should I buy a Ultra5?" Page:1
• "USB 2.0 on Ultra 2 via PCMCIA" Page:1
• "java plugin for firefox" Page:1
• "Working kernel config for blade 1000" Page:1
• "Problems getting NetraX1 to boot from disk" Page:1
• "[SOLVED] automount at boot doesn't mount network stuff" Page:1
• "net-snmpd and 64bit interface counters" Page:1
• "Stage3 on Ultra2E bombs on Kernel Compile" Page:1
• "wine" Page:1
• "Numlock causes things to lock in fluxbox" Page:1
• "at daemon" Page:1
• "hpijs error compiling on SPARC" Page:1
• "emerge gentoo-dev-sources-2.6.9 problem" Page:1
• "Gnome on sparc?" Page:1
• "mod_php 4.3.9 and $_ENV variables" Page:1
• "Gentoo 2.4.27 on UltraSparc: fsck problems at bootup[SOLVED]" Page:1
• "find: /var/spool/cron/lastrun/cron.hourly: No such file..." Page:1
• "Kicker on Ultra 10 SPARC" Page:1
• "Kicker on Ultra 10 SPARC" Page:2
• "Kicker on Ultra 10 SPARC" Page:3
• "Kicker on Ultra 10 SPARC" Page:4
• "Weird problems with 2.6.7" Page:1
• "init: Id "c1" respawning too fast: disabled for 5" Page:1
• "Sparc & eGroupware Advise for Box welcome" Page:1
• "compiling kernel for ultra sparc 2" Page:1
• "Boot cdrom gives "Fast Data Access MMU Miss" Error" Page:1
• "Why do you use sparc?" Page:1
• "udev, hotplug and coldplug on sparc" Page:1
• "Error during Bind patching" Page:1
• "emerge xfree on SPARC Ultra10" Page:1
• "IDE controller works but no /dev/hd*" Page:1
• "blackdown jre 1.4.2.x on sparc anytime soon?" Page:1
• "Syskonnect SK-9821" Page:1
• "Just got an E250, what to do?" Page:1
• "bittorent/python-curses issue." Page:1
• "SS20 recommanded config options? (Cross Compile/Distcc)" Page:1
• "Errors compiling kernel sparc-sources-2.4.27-r3 on Ultra2" Page:1
• "Bad magic number" Page:1
• "Ultra 5 won't boot" Page:1
• "livecd 2004.3 -- initial ramdisk fatal error" Page:1
• "mount problem on Sun Fire V100" Page:1
• "Weird keyboard problems on Ultra10" Page:1
• "kernel 2.6.x on sparc" Page:1
• "Hey, anyone listening? Please!!" Page:1
• "Is it possible to change?" Page:1
• "full duplex?" Page:1
• "Ultra10 question" Page:1
• "Video monitor question about sun/sparc" Page:1
• "X on sun ultra5" Page:1
• "Java 1.4.2" Page:1
• "flash updating" Page:1
• "Any ideas on this U60 X issue?" Page:1
• "iptables and memory allocation errors" Page:1
• "Samba 3.0.8 fails to compile/link" Page:1
• "Creator Gfx and X" Page:1
• "SUNPCi cards" Page:1
• "What shall I do with my U60?" Page:1
• "solaris binary emulation" Page:1
• "Sparc 2004.3 livecd" Page:1
• "Sun E250 and RSC" Page:1
• "lost password in installation" Page:1
• "Sun disklabel help" Page:1
• "bad keyboard setting" Page:1
• "gentoo sparc developers" Page:1
• "Installation of Ultra 10" Page:1
• "Nectra T1 LOM Support" Page:1
• "XVideo on a Creator3D...yay or nay ?" Page:1
• "Gentoo - Sparc E250 system returning to openboot prompt" Page:1
• "DHCPCD not starting at boot time" Page:1
• "Sun 5 JDK Source" Page:1
• "Ultra5 boot stalls after CD-ROM" Page:1
• "U30-problem with keyboard" Page:1
• "Adaptec 29160 on Ultra10?" Page:1
• "Just won a 400mhz ultra5... what keyboard?" Page:1
• "2.6.6 on sparc64 blade 150, ati mach64: xfree or xorg?" Page:1
• "X on Sparc help please" Page:1
• "Can i throw a USB controller into a U5/10?" Page:1
• "EATA module compilation problem with 2.4.27_sparc kernel" Page:1
• "What sparc to get" Page:1
• "SSH and remote management" Page:1
• "jre on sparc and other n00b questions" Page:1
• "Error from tftpboot: Unimplemented SPARC system call 188" Page:1
• "Type 5 mouse, doesnt work in X until disconnect/reconnect" Page:1
• "Where is the passwd command?" Page:1
• "Is Audio on SS20 supported?" Page:1
• "xorg with raptor gfx card" Page:1
• "kernel (2.6.7) boot messages garbled on serial ... [SOLVED]" Page:1
• "Software Raid partitions on a sparc system" Page:1
• "High CPU with E220R and MRTG" Page:1
• "Netra T1...Wierd Problem" Page:1
• "XKB Problems Sun Ultra 5" Page:1
• "getting warnings: kernel 2.6.7 make image modules_install" Page:1
• "GCC compile error installing on [b]32 bit only[/b] Ultra 1" Page:1
• "bootstrap.sh fails on ultra 10" Page:1
• "Pause during boot process" Page:1
• "cruel logs /var/log/messages - Instruction DUMP:" Page:1
• "Successfull installation on 2 sparc boxes (Sunblade 150s)!!" Page:1
• "problems getting netra t1 to respond to minicom" Page:1
• "Gentoo installation on a sun fire v120 [SOLVED]" Page:1
• "Azureus on Gentoo Sparc Linux" Page:1
• "Ultra 5 8GB limitation" Page:1
• "How to upgrade from 2.4x to 2.6x" Page:1
• "Help installing at a sparcstation 20 please" Page:1
• "X11 on Blade 100 - problem to configure Elite 3D Lite" Page:1
• "Revisiting "SILO Fast Data Access MMU Miss"" Page:1
• "SPARCstation 5 install help" Page:1
• "Pinnacle PCTV not registered on PCI bus on Ultra10" Page:1
• "Ultra 10 x86conf" Page:1
• "Netboot on Netra T105 doesn't seem to be working." Page:1
• "Sun Ultra 5 Gigabit Ethernet" Page:1
• "Ultra5/10 without PCI riser card ... does it work?" Page:1
• "Keyboard problem: no pipe key (the 105th key on pc105)" Page:1
• "newbee guestion, confused about 32bit/64bit" Page:1
• "Xorg abort Elite 3D (2.6.6) (Fix 'AFB Firmware not loaded')" Page:1
• "[q] Can't load Xorg (Ultra1 sparc creator 3D)" Page:1
• "Enterprise 4500 + Gigabit Ethernet SBus (GBE/S) 2.0" Page:1
• "I just bought an ultra 10" Page:1
• "SILO "does not appear executable" error" Page:1
• "/var keeps filling up" Page:1
• "SILO Illegal Instruction when Booting LiveCD from SPARC 20" Page:1
• "Zope - Postgresql doesnt work" Page:1
• "SPARC install - Jumpstart???" Page:1
• "SPARCserver 20 and an X Desktop" Page:1
• "Xorg.conf for Blade 1000 with PGX64?" Page:1
• "I want to install Gentoo on a Ultra1, but..." Page:1
• "Problem with label [SOLVED]" Page:1
• "Optimized programs - bang for the buck?" Page:1
• "[q] Install Ultra1. But Don't load X-Window" Page:1
• "Kernel problems - wont compile modules" Page:1
• "smbclient bus error" Page:1
• "silo fatal error with raid 1" Page:1
• "Serial logins working on 2.6.[89]?" Page:1
• "ERROR:Dev-Java/Blackdown-jre-1.4.1 Failed. --SOLVED." Page:1
• "Elite 3D, Xorg, 2.6.6 kernel - problem with rc.afb [solved]" Page:1
• "gcc 3.4 on an Ultra 5?" Page:1
• "Any experience with Enterprise 3000's?" Page:1
• "what's with gnome-xml/libxml/libxml/libxml/libxml/libxml/..." Page:1
• "Impact of open sourcing solaris?" Page:1
• "Sun Blade 100 Boot 2004.2 CDROM USB Keyboard does not work" Page:1
• "Win2K client locks while accessing Samba (SOLVED!!)" Page:1
• "How to emerge db(uniquename) and then OpenLDAP?" Page:1
• "Whats the status of XVR-whatever in Linux?" Page:1
• "Sparc more cutting edge than x86? follow xorg sticky note?" Page:1
• "SILO 1.4.8, V210 not working from harddisk. CDROM ok" Page:1
• "Xorg.conf for sparc ultra 10 Elite 3D" Page:1
• "Xorg.conf for sparc ultra 10 Elite 3D" Page:1
• "Openboot / SILO help! What flavour for Ultra 60..." Page:1
• "IT WORKS!" Page:1
• "Migrate to sparc 2.6 from devfs ->enough nodes in /dev?" Page:1
• "metalog consumes all CPU" Page:1
• "Working xorg.conf for Sun XVR-100 (Radeon)?" Page:1
• "Machine Freeze on 2.6.8 kernel / Blade 100 on shutdown" Page:1
• "Ultra5 & network problems" Page:1
• "xorg-x11-6.8.0-r1 stable." Page:1
• "ultra 10 simple question" Page:1
• "2.6, smp, status/performance?" Page:1
• "performace differences between stage 1, 2, and 3 install" Page:1
• "Installing Gentoo 2.4.27 on Ultra 5 - Failure at Reboot" Page:1
• "floppy install on an ultra5" Page:1
• "apm blackscreen" Page:1
• "Ultra 5, kernel bridging" Page:1
• "Sun Ultra 10 + Gentoo Sparc + 120Gb Drive" Page:1
• "smp and kernel 2.6.7" Page:1
• "happy meal chipset net seed issues." Page:1
• "firefox compile failure" Page:1
• "Can't boot iso image on Ultra 5." Page:1
• "can not use happy meal ethernet" Page:1
• "About fan control in linux" Page:1
• "Sun FC25/S soc.o driver w/ 2.6.7-r14 Problem" Page:1
• "OpenSSH hangs, Ultra 60" Page:1
• "compile kernel error on Ultra1" Page:1
• "Cannot find -boot/silo.con" Page:1
• "Xorg config for onboard ATI on Blade 100?" Page:1
• "Xorg installation & configuration issue on Ultra 30" Page:1
• "INIT: Id "c1" respawning too fast: disabled for 5" Page:1
• "DVB on Sparc ?" Page:1
• "lspci" Page:1
• "X server on PCI-based sparc" Page:1
• "Update /etc/make.profile and Lose Package DB?" Page:1
• "Anyone need to clone their Sun machines?" Page:1
• "inetd missing" Page:1
• "[Huge Post & $20 REWARD!] SunFire V100 problems." Page:1
• "Aironet 340 on Sun Blade 150" Page:1
• "emerge kde....and wait a month?" Page:1
• "how to boot from second hdd" Page:1
• "Ultra 10 dual head" Page:1
• "boot net pointer wanted" Page:1
• "upgrade kernel Xfree problem" Page:1
• "Expert3d on Blade 100 - Driving me Insane" Page:1
• "install from stage 1" Page:1
• "sparc64 system" Page:1
• "Freenx" Page:1
• "Install issue with automake and autoconf" Page:1
• "Raid-1 Support off the Live CD" Page:1
• "Ultra 60 with creator or elite video?" Page:1
• "Ultra 10 X11 config mouse buttons won't work" Page:1
• "sound on my sunblade1500" Page:1
• "need advice on where to get sun parts (frame buffers)" Page:1
• "SB1000 hardware, Ultrasparc III support/status?" Page:1
• "dual head strange problem" Page:1
• "Comands not recognised" Page:1
• "SILO Fast Data Access MMU Miss" Page:1
• "SILO Fast Data Access MMU Miss" Page:2
• "Why is my box shutting down?" Page:1
• "Sun Keyboard Type 6" Page:1
• "Install docs neglect boot partition setup?" Page:1
• "No Console Login on E250" Page:1
• "question on Creator3d" Page:1
• "want to upgrade U80 scsi system but need help" Page:1
• "question about SB1000 SB2000" Page:1
• "Error booting..." Page:1
• "vixie-cron locks system after x starts up?" Page:1
• "Sparc64 network install, tar error with stage 2/3 files." Page:1
• "which device is my sun mouse?" Page:1
• "installing gentoo on an ultra enterprise 2" Page:1
• "Ultra 60 install questions" Page:1
• "Proud new Sunfire v100 owner" Page:1
• "Gento on Sun Blade 1500" Page:1
• "/boot partition noob question" Page:1
• "Ultra 10 - cannot install xorg-x11" Page:1
• "Install Trouble with Ultra 5 and latest Universal Installer" Page:1
• "Gentoo kernel and Sparc ecache issue" Page:1
• "SUNWvts equivalent for Linux?" Page:1
• "Non-usb Type 6 keyboard on AXi based sun" Page:1
• "Sparc equip for sale, how much do you think I should ask?" Page:1
• "Sparc installation" Page:1
• "Anyone ever attempt Gentoo Linux on Enterprise 4000?" Page:1
• "Install help" Page:1
• "Good place to start? Headless Server" Page:1
• "user-mode Linux under SPARC" Page:1
• "Netra x1 tail of woe - please help! (2 of 3 solved)" Page:1
• "Apache, slow, many processes" Page:1
• "crafty on sparc" Page:1
• "Sun keyboard settings in rc.conf" Page:1
• "Black screen after try to install on Ultra 10" Page:1
• "First boot, I can't type anything?" Page:1
• "new install" Page:1
• "Is there any speed difference with gentoo?" Page:1
• "Why is default sparc kernel 2.4?" Page:1
• "Wow, not enough swap space caused all my issues." Page:1
• "PCI nic (realtek 8139too) not working in ultra5" Page:1
• "what does linux give me that sparc does not?" Page:1
• "Ultra10 Ram" Page:1
• "dhcpcd resource temporarily unavailable." Page:1
• "Is there any way to monitor the temperature?" Page:1
• "flickering monitor (console)" Page:1
• "Kernel Oops with 2.4.26 from sparc64-universal-2004.2 cd" Page:1
• "Which Ultra?" Page:1
• "graphics question ultra 80" Page:1
• "ultra 5 as router/gateway .. need adivce on PCI nic" Page:1
• "state of snd-sun-cs4231 in kernel higher than 2.6.5?" Page:1
• "Poor upload speeds" Page:1
• "Advice on dual head setup" Page:1
• "ximian-connector on sparc?" Page:1
• "BINHOST??" Page:1
• ""Invalid Scan Freq" on Ultra 5/10" Page:1
• "PC graphics on Blade 100" Page:1
• "stupid Q about sun keyboards of diff types (5,6,etc)" Page:1
• "Riva128 on Blade100" Page:1
• "prelink not in portage?" Page:1
• "multiple displays in xorg on an ultra 5" Page:1
• "solaris emulator" Page:1
• "sparc64, 64bit userland stuff" Page:1
• "Problems with disclabel, ss20" Page:1
• "Gentoo Linux & int max size" Page:1
• "Ultra2 Creator hangs after boot" Page:1
• "tftpboot / elftoaout" Page:1
• "Elite3D, Xfree and 3Dacceleration" Page:1
• "2004.1 Sparc 32 Stage 2 Tarball problem pr.c invalid chars" Page:1
• "openssl-0.9.7d-r1" Page:1
• "Invalid pointer" Page:1
• "MOD_AUTH_LDAP masked" Page:1
• "What should I do with this machine?" Page:1
• "E250: make front-panel LEDs go green after OS is up-how?" Page:1
• "X11/atyfb on E250: Show Xorg.conf please" Page:1
• "emerge make: invalid option -- J make: invalid option -- 3" Page:1
• "3D acceleration on an Ultra 5 with an ATI Radeon" Page:1
• "Missing /dev/audioctl on Sun Blade 100 (Kernel 2.4.26)" Page:1
• "Xfree / X on ultra 5" Page:1
• ""Illegal Instruction": booting LiveCD on Sparc Ult" Page:1
• "Can you emerge to openssl-0.9.7d-r1: -mcpu=ultrasparc prob" Page:1
• "Enable On-Board Audio on Sun Blade 100" Page:1
• "Some questions before I spend some time and money" Page:1
• "Ultra1 serial install" Page:1
• "Frontpage Extensions/Apache2/Gentoo/Sparc" Page:1
• "Xorg and Type5c keyboard" Page:1
• "Troubles running Xorg on a SunBlade 100 with Expert3D-Lite" Page:1
• "Ultra 10 Video" Page:1
• "dosbox/bochs/other: dos emulation on sparc" Page:1
• "APC and E4500" Page:1
• "Help with buying a sparc" Page:1
• "Sparc Ultra5 128 Mb ram" Page:1
• "Huge disk ?" Page:1
• "acroread on sparc" Page:1
• "Gentoo 2004.1 on SunBlade 100 Booting Problem (Framebuffer)" Page:1
• "Kernel compile on Sparc64" Page:1
• "alsa-driver masked by: -keyword" Page:1
• "alsa USE FLAG problem" Page:1
• "Clear NVRAM password?" Page:1
• "Games for Gentoo/Sparc" Page:1
• "swatch is masked anybody got a replacement program" Page:1
• "U5 New 2004.1 Install Xorg sorta Hangs" Page:1
• "fdisk-problem on SUN Blade 100" Page:1
• "LiveCD doesn't work on Ultra 10" Page:1
• "[OT] Chaining SPARCserver 10 power supplies o_O" Page:1
• "How to Erase SunOS Partition?" Page:1
• "emerge kde problems" Page:1
• "xorg problem on ultra60 with elite3d" Page:1
• "error installing perl in emerge system part of stage 1 inst" Page:1
• "scsi hosts and usb mass storage device" Page:1
• "Elite3D microcode hang up" Page:1
• "CD Player for Sparc" Page:1
• "Can't "make menuconfig" kernel-2.4.26-sparc-r1" Page:1
• "bootstrape stage1 on sparc 32 (SS5) fails with ERRORS" Page:1
• "Sound on Ultra SPARC 10?" Page:1
• "System only boots to openboot prompt" Page:1
• "Install on a U60" Page:1
• "Entrance on Ultra 5" Page:1
• "How to upgrade OpenBoot" Page:1
• "sparc "sleeping"" Page:1
• "2.4.26 kernel compilation errors" Page:1
• "newbie silo question- ultra 10, kernel 2.4.26" Page:1
• "swap not working" Page:1
• "Enterprise 450 vs Xfree" Page:1
• "Ultra2 gcc-3.3.3-r5 compile error." Page:1
• "noob sparc question" Page:1
• "Sound on an Ultra 60" Page:1
• "Coreutils on Sparc20" Page:1
• "qlogic SCSI on sparc32 - scsi abort failure: 4005" Page:1
• "Blade 100 & DMA on IDE" Page:1
• "Does Linux outperform Solaris on a SPARC based machine?" Page:1
• "X problem on Ultra 2" Page:1
• "Qmail issues on gentoo/sparc" Page:1
• "Eclipse start-up error" Page:1
• "Sun Sparc Server 1000" Page:1
• "Emerge gnome failing on epiphany" Page:1
• "2004.1 on Sparc64" Page:1
• "emerge gnome from package cd?" Page:1
• "Info on an Ultra2 scsi controller please?" Page:1
• "2004.1 system install without a network - where's silo?" Page:1
• "SILO hangs at Booting Linux...." Page:1
• "Sun Happy Meal missing from 2004.1???" Page:1
• "Xfree on SparcStation 10 - Help!" Page:1
• "Bootstrap on Ultra2 fails - autoconf missing" Page:1
• "fs type ISO9660 not supported" Page:1
• "my gentoo is dead" Page:1
• "OUCH /etc/init.d/net.etho is empty" Page:1
• "[Solved] Repairing a bootsector that got zapped by SILO" Page:1
• "X Server on SS5 with S24" Page:1
• "Ultra 2E/Creator and 5c keyboard" Page:1
• "error: image too large to fit in destination" Page:1
• "Bootstrap on Ultra2 Sparc fails - Perl missing?" Page:1
• "SILO in SunFire 280R" Page:1
• "Silo + single user mode" Page:1
• "sparc 20 compares to what in x86 land ?" Page:1
• "xorg-x11-6.8.2-r1 stable; link to xorg.conf for ffb/afb" Page:1
• "Xorg/XFree failure on Ultra 60 Cretor 3D" Page:1
• "Cross Compiling with distcc" Page:1
• "i managed to netboot... now what do i do ?" Page:1
• "Kernel panic" Page:1
• "First boot after install" Page:1
• "Ultra 60 w/ Creator3D" Page:1
• "[ebuild U ] sys-boot/silo-1.4.4 [1.3.1-r1] wont upgrade" Page:1
• "Live CD install aborts at emerge" Page:1
• "help!!!!" Page:1
• "bonus question:" Page:1
• "Weird System Hang" Page:1
• "Video playback problem on U10 with Elite3D" Page:1
• "modules problem on sparc64" Page:1
• "Using all the keys on a type 6 keyboard" Page:1
• "sparc64 + gcc-3,4" Page:1
• ""emerge system" fails on SS5" Page:1
• "Please post your experiences with Sun Enterprise 250" Page:1
• "Making a Sparc boot floppy ?" Page:1
• "passwd failing on newly emerged system" Page:1
• "net-pf-1" Page:1
• "Sparc as Developing station" Page:1
• "Keyboard problem after reboot with kernel 2.6 [Solved]" Page:1
• "Error with the stage1 Tarball - Sparc64" Page:1
• ""emerge system" failure on sparc64 smp" Page:1
• "ultra sparc10 install, can't partition???" Page:1
• "Getting a SPARC server and wanna know about it...." Page:1
• "Dual-headed Gentoo Sparc-- Possible?" Page:1
• "Update on how my install is going" Page:1
• "Sparc32 2004.1 packages iso is broken!" Page:1
• "Packages not yet available for Sparc" Page:1
• "Nothing happened after reboot on Ultra 10" Page:1
• "SILO Boots linux then screen goes black" Page:1
• "Recommendations for PCI WLAN adapter for Ultra10" Page:1
• "XVR-100 Radeon VE experimentation." Page:1
• "IDE controllers on kernel 2.6 !" Page:1
• "Device support for SPARC: one more to add" Page:1
• "qmail-1.03-r13 doesn't start after fresh install" Page:1
• "X.Org or Xfree on sparc?" Page:1
• "Building SPARC Kernel Problem" Page:1
• "procps 3.1.15 top failed /proc/stat read on 2.4.26 U2" Page:1
• "make options for SS5" Page:1
• "Stage 1 unpack problems" Page:1
• "n00b with an Ultra 10 and boot problems" Page:1
• "why would unpacking stage2 fail?" Page:1
• "prom question--video resolution" Page:1
• "Pulling hair out. Cannot boot Sunblade 100 with Silo" Page:1
• "Minimum OBP version for SPARC64" Page:1
• "Did I kill my Sun? - Help!" Page:1
• "2004.1 Sparc64 LiveCD Panic" Page:1
• "Gentoo Linux 2004.1 Released for SPARC and SPARC64" Page:1
• "Bad Magic Number" Page:1
• "Solaris Vs Gentoo" Page:1
• "performance of one sun vs another sun" Page:1
• "cant boot on ultra30" Page:1
• "kernel 2.6.6-rc1 on Ultra-5" Page:1
• "[SOLVED] Can't boot from own compiled kernel 2.4.26" Page:1
• "13W3 to HD15 connector how-to and pinout" Page:1
• "xorg-x11 experiences." Page:1
• "sun Ultra 10 gentoo 2.4.24 boting fsck problem" Page:1
• "Bug Report and Question" Page:1
• "emerge --fetchonly system shows nothing?" Page:1
• "2004.0 on Netra T and E250 Boot Help Please" Page:1
• "SELinux on SPARC ??" Page:1
• "alsa with 2.6.5 kernel on Ultra 80" Page:1
• "mplayer colormap problems with sunffb" Page:1
• "SILO problem" Page:1
• "ditching Sun screen defaults" Page:1
• "webcam ?" Page:1
• "ss5: cannot log in. how do i put gentoo on it ?" Page:1
• "Elite3d + 2.6, anyone have problems?" Page:1
• "sys-cluster/lam-mpi-7.0.4 going stable" Page:1
• "Install Gentoo on Sun Fire v240 problem" Page:1
• "qt/kde emerge problems" Page:1
• "[SOLVED] XFree 4.3.99, GLX: no double buffered visuals?" Page:1
• "Compiling kernel 2.6.5 for Ultra 1" Page:1
• "Userland - 32 or 64 bit?" Page:1
• "Eclipse" Page:1
• "'emerge system' fails on my SS20, now what?" Page:1
• "Boot from software raid" Page:1
• "ultra 5 locks up after 2 days uptime" Page:1
• "What X driver is used for Sun TGX frame buffer?" Page:1
• "Compiling at76c503a berlios wlan on Sparc" Page:1
• "Illegal Instruction" Page:1
• "superkaramba" Page:1
• "yasi ( Yet Another Silo Issue ) reiserfs" Page:1
• "soundproblems on a ultra80" Page:1
• "having problems setting up gentoo on a SS20" Page:1
• "SparcStation 5" Page:1
• "TSM for SPARC Linux?" Page:1
• "Gentoo on a Sun Blade 100" Page:1
• "E4500 UltraSparc - Gentoo installation" Page:1
• "size of kernel is too big, can not boot system[solved]" Page:1
• "Bad experiences with distcc and ccache" Page:1
• "X on an Ultra 10 - so close, yet so far..." Page:1
• "How to get ee on sparc??" Page:1
• "Sound doesn't always work." Page:1
• "Can't use vga monitor" Page:1
• "Emerge -u error on help2man" Page:1
• "Emerge coreutils fails on my Sparc20" Page:1
• "Whats difference of emerge -uvp world or emerge -uvp system" Page:1
• "Forgive the newbness but...." Page:1
• "help2man 1.33 fails as dependecy for coreutils" Page:1
• "No video on boot (SS5)" Page:1
• "disable false BRK signal when serial console power loss" Page:1
• "unknown sparc network card" Page:1
• "kernel 2.4.24 compile failed on Ultra10" Page:1
• "/dev/shm?" Page:1
• "kernel 2.4.24 for SPARC compile error!" Page:1
• "Receiving /dev/ttyS0 error after upgrading to kernel 2.6.4" Page:1
• "proper way to backup?" Page:1
• "Semi-OT: Creation Of Solaris Disk Labels?" Page:1
• "Problem installing Gentoo on a SparcStation 5" Page:1
• "Installation fails on my Ultra2" Page:1
• "mod_perl and apache2" Page:1
• "hard masked packages" Page:1
• "squirrelmail setup" Page:1
• "Sun monitor on a PC" Page:1
• "SPARCStation 5, 128MB RAM, 1Gb SCSI hdd." Page:1
• "Error compiling automake on Sparc20" Page:1
• "Hardware Compatibility?" Page:1
• "Elite 3D on Ultra 30" Page:1
• "Email filtering gateway on an Ultra 10?" Page:1
• "Sound on U2" Page:1
• "What do you do with the "Whole disk" partition?" Page:1
• "Boot issues" Page:1
• "RAID5 corrupting partition table" Page:1
• "Failing to get the zatm module to work" Page:1
• "problem when compiling xfree" Page:1
• "OBP "Cant open boot device" on Ultra2 SMP" Page:1
• "Ultra5, 2.6.3, X dies "no devices found"" Page:1
• "Kernel" Page:1
• "startx causes monitor to shut off (was RAM on video card?)" Page:1
• "xf86config" Page:1
• "cfdisk?" Page:1
• "Sunvideo" Page:1
• "Ultra 250, can't fdisk SCSI device /dev/sdf" Page:1
• "Sun Blade 100 cdrom" Page:1
• "What window manager do you like to use on Sparc?" Page:1
• "Boot problems" Page:1
• "32 or 64 bit?" Page:1
• "Broken Fdisk" Page:1
• "Kernel panic, again. LiveCD 1.4 RC5 on SS10 dual CPU." Page:1
• "xfree build bug?" Page:1
• "Sun Mouse on Ultra 5 with 2.6 kernel" Page:1
• "which application for audio streams?" Page:1
• "Getting "Bus error" on "silo -C /boot/silo.co" Page:1
• "PGX32(Permedia2) video issues" Page:1
• "1st boot hangs: Now, can't recompile kernel {SOLVED}" Page:1
• "New Install: Can't set root passwd!!" Page:1
• "Keyboard problem on an Ultra 5, Just upgraded to 2.6.4" Page:1
• "2004.0 Sparc64 LiveCD install on Netra T1" Page:1
• "genkernel dies on sparc/32 during install" Page:1
• "emacs ignores C-<mouse 1> on Blade 100" Page:1
• "Choosing a kernel:how stable is 2.6 on sparc64? Experiences?" Page:1
• "modprobe errors, but everything works??? [RESOLVED]" Page:1
• "Can you do wireless NIC on Sparc?" Page:1
• "Do you need to have USE flag X on install?" Page:1
• "Compile issues on a new Sunblade 100 install." Page:1
• "DRI + Creator3d" Page:1
• "Ultra 60 - IDE, USB & SCSI?" Page:1
• "2004.0 on Sparcstation 20" Page:1
• "liveCD install on ultra10" Page:1
• "Can SunOS partition be mounted RW ?" Page:1
• "Does LiveCD 2004.0 boot on SunBlade 2500?" Page:1
• "DBD-Oracle and gentoo/sparc?" Page:1
• "U60 keyboard + mouse in 2.6.3" Page:1
• "Running X on PCI Sparcs under 2.6" Page:1
• "configuring ethernet on Ultra60" Page:1
• "Does ASLA work with 2.6?" Page:1
• "The gentoo tftp boot image can not drive Sun Blade 2000" Page:1
• "Sparc partition w/fdisk. What is 'u' flag?" Page:1
• "Clustering Gentoo on Sparc Hardware" Page:1
• "E4500 anyone running Gentoo on one?" Page:1
• "Can't compile Perl 5.8.2-r1 on SparcStation 5" Page:1
• "netboot works, but..." Page:1
• "Sunblade 100 Installation" Page:1
• "Would an install on a sparc req on regular board be..." Page:1
• "Xmule" Page:1
• "serial modem" Page:1
• "Kernel won't compile, but no errors!" Page:1
• "How do you turn off an Ultra 5" Page:1
• "Installing: emerge sync locks up box" Page:1
• "Installing: emerge sync locks up box" Page:2
• "Where are sources on LiveCD? RESOLVED" Page:1
• "Question on partitioning 2 scsi drives on Sparc" Page:1
• "compile kernel error with 2.4.25 or 2.4.24-r1" Page:1
• "Ultra 60 with dual procs won't boot" Page:1
• "For Ultra2: How to find hardware config for kernel compile?" Page:1
• "SparcStation 5 + gentoo" Page:1
• "Constant file coruption" Page:1
• "Problem with emerge sync on SparcStation 5" Page:1
• "2004.0 release of sparc64 available" Page:1
• "First Sparc..Ultra 2: Tips on starting? New Gentoo 2004?" Page:1
• "Problem with SILO on an UltraSparc 10" Page:1
• "XF86Config U5/PGX32" Page:1
• "Livecd doesn't like network interfaces" Page:1
• "emerg of arts failing" Page:1
• "Trying to convert from RH to Gentoo on a Sparc" Page:1
• "2004.0 sparc32?" Page:1
• "SMP Sparc32 stability woes :(" Page:1
• "Architecture specific install guides" Page:1
• "sparcbooks/sparcles and irda support?" Page:1
• "floppy, headless sparc 20 install??" Page:1
• "Quantum VK4550J drive" Page:1
• "glibc-2.3.2-r9 compile failure" Page:1
• "LVM2/2004.0/2.6.x & install" Page:1
• "2.6.x kernel on sparc howto" Page:1
• "Blade 100 & root FS" Page:1
• "Apache 1.3.29 +mod_ssl on SPARC hangs on ipc()" Page:1
• "Sparc Ultra 10 w/Creator 3D" Page:1
• "Sparc FAQ (Where is it?)" Page:1
• "Booting 2.6.3 on SunBlade 100 panics" Page:1
• "build of help2man fails during emerge -up system" Page:1
• "Gentoo Ultra 1 CD Boot Problem" Page:1
• "have no nic with tftpbootimage" Page:1
• "Can't access the net with lynx to get mirrors" Page:1
• "dual head ultra1 creator3d + sunGX" Page:1
• "2.6 kernel, sparc (64), install docs, and other misc" Page:1
• "comments/advice on architecture specific CFLAGS (and CHOST)" Page:1
• "Emerge -u world" Page:1
• "Cyrus imapd" Page:1
• "Sysutils or unix2dos dos2unix?" Page:1
• ""Expert 3D Lite" graphic card - what driver?" Page:1
• "Error emerging (upgrade) ntp 4.1.2" Page:1
• "Modprobe error on sparc32" Page:1
• "Removing default-sparc-1.0 and default-sparc64-1.0 profiles" Page:1
• "Buying a Sun UltraSPARC 2" Page:1
• "Blackdown JDK problem on fresh gentoo install" Page:1
• "Oracle RDBMS on Sparc64" Page:1
• "Printing" Page:1
• "X won't run on Blade 150" Page:1
• "Keyboard and Mouse config in XF86Config" Page:1
• "Can anyone help with Gentoo on Ultra5 install problem?" Page:1
• "Gentoo as DHCP client in Microsoft environment" Page:1
• "silo 1.4.x unleashed" Page:1
• "Undefined reference to `_mcount' during kernel compile..." Page:1
• "problem with network" Page:1
• "Headless install and other Ultra 150 queries." Page:1
• "Kernel build for 2.4.24 error" Page:1
• "/proc" Page:1
• "Kernel 2.6.2 ?" Page:1
• "Sparc fdisk ?" Page:1
• "New install on Sparc Ultra 10 newbie observations" Page:1
• "Gentoo wont boot on my 450 (not enough memory for initrd)" Page:1
• "DRM and elite3d....is it possible?" Page:1
• "Help with new Ultra5 install" Page:1
• "W00t!!!!!! I converted my Gentoo sparcstation to be DISKLESS" Page:1
• "Configuring X on a Sunblade with kernel 2.6.1" Page:1
• "Sparc Partitioning Question:" Page:1
• "/var/log/wtmp" Page:1
• "failed to load eth0 -- Sun Ultra 5" Page:1
• "boot compact-flash?" Page:1
• "Memory on an Ultra 2....Pricing on units?" Page:1
• "Sun Java2 on sparc64" Page:1
• "Triva: bootstrap time on Classic microsparc" Page:1
• "Fatal error: You do not have enough continuous available mem" Page:1
• "kernel 2.6 options for ultra 80 scsi" Page:1
• "emerge kbd-1.12 fails" Page:1
• "Ultra 5 Onboard VDA settings for X" Page:1
• "After emerge -u world it won't boot" Page:1
• "2.6 seems to work...then doesn't" Page:1
• "What file system should I use on a Sparc20" Page:1
• "which compiler needed to compile 2.6 series kernel?" Page:1
• "X/KDE Question" Page:1
• "Building X and Gnome2 on Ultra 10 Creator 3D" Page:1
• "Ultra5 emerge system Problem" Page:1
• "ultra 5 installation problem" Page:1
• "SPARC bluetooth working" Page:1
• "need some advice :)" Page:1
• "Sparc Cluster..." Page:1
• "elite 3d in ultra 5?" Page:1
• "Want to obtain a sparc machine" Page:1
• "Bootstrap hangs on Updating dependencies" Page:1
• "dual display, no 2d accleration" Page:1
• "usb keyboard question" Page:1
• "Ultra 5, change monitor resolution (serial console?)" Page:1
• "PHP" Page:1
• "kernel 2.6.1 and keyboard problem on Ultra 10" Page:1
• "What is best config/bang for buck Sparc w/Gentoo?" Page:1
• "question about processor models" Page:1
• "Sparc root passwd?" Page:1
• "Sparc root passwd?" Page:2
• "problem accessing cdrom" Page:1
• "Brainfade - deleted gcc, now emerge is fubar. Any way back?" Page:1
• "Sparc Noob with a 333 Ultra II AXi - why install..." Page:1
• "Gnome compile error" Page:1
• "question about graphics in Ultra 80" Page:1
• "New Gentoo system & question" Page:1
• "How long to emerge Gnome???" Page:1
• "gentoo on sparcstation 5 problem" Page:1
• "why masked?" Page:1
• "Changing filesystem" Page:1
• "Conspiracy Against Me regarding Sun displays." Page:1
• "how to compile a netboot image for sparc on a x86 arch?" Page:1
• "Kernel Compile speed 2.4 -2.6" Page:1
• "How do you keep you kernels available to reuse." Page:1
• "Poor video quality Xine+Mach64+XFree 4.3.99.902" Page:1
• "sys-devel/egcs64-sparc package conflicts" Page:1
• "NFS root, file server, all on sparc..." Page:1
• "Ultra5, Disk dma and hdparm issues" Page:1
• "xfree screen problems ....and some cpu upgrade questions..." Page:1
• "Kernel 2.6 on SPARC" Page:1
• "Gentoo on Netra t1 105?" Page:1
• "-bash: /usr/bin/qpkg: cannot execute binary file" Page:1
• "Gentoo on Tadpole SparcLE Laptops?" Page:1
• "Endian wierdness" Page:1
• "Sparc32 1.4rc5 live cd image problem" Page:1
• "Elite3D: How do you get it working with xfree?" Page:1
• "sparc64 chost doesn't seem to bootstrap" Page:1
• "Linux on a SparcServer 1000 box with 8 Processors, HELP!" Page:1
• "Ultra 1E: serial console and power off" Page:1
• "Emerging Gnome on SPARC corrupted my gcc" Page:1
• "Compiling 2.6.0 Sparc64 Ultra AXe" Page:1
• "i2c drivers" Page:1
• "Dual head on Ultra 10?" Page:1
• "DVD/DivX on a Sparc...What's it take?" Page:1
• "Gentoo on Ultra-10, error emerging VNC, xfree, ttmkfdir" Page:1
• "XFree 4.3.0 + kernel 2.6.0 trouble" Page:1
• "problem installing on ultra5" Page:1
• "It is done wow" Page:1
• "Ultra 10 DVD playback performance" Page:1
• "Sun USB Type 6 Keyboard Not Working" Page:1
• "Linux equivalent to Solaris' 'init 0'?" Page:1
• "rp-pppoe users?" Page:1
• "SPARC64 and UDMA?" Page:1
• "YAY: got 1.4 loaded on my ultra 5..." Page:1
• "SMP on Ultra 60" Page:1
• "courier-imap masked?" Page:1
• "Gentoo 1.4 on Ultra10" Page:1
• "Using a Promise controller with SPARC, my experiences" Page:1
• "Genkernel masked?" Page:1
• "Fresh Install fails compiling glibc in ibm1004.c" Page:1
• "file system support on liveCD" Page:1
• "rc5 and sunt5-uk keyboard map" Page:1
• "First steps with gentoo-sparc" Page:1
• "Kernel doesn't compile for 2.4.23 and Ultra1 with Creator 3D" Page:1
• "Invalid db entry when emerging" Page:1
• "emerge Qmail Broken" Page:1
• "A cheap way to get into 64bit computing." Page:1
• "Booting from a software RAID partition with SILO" Page:1
• "Status of SMP on supersparcs?" Page:1
• "DVD - playback" Page:1
• "32bit SparcStation boot proms, nvram, batteries..? supplier?" Page:1
• "Fatal server error: no screens found (XFree86)" Page:1
• "FREE NVRAM chip" Page:1
• "1.4_rc4 SS2 cdrom serial not booting" Page:1
• "Installing Gentoo as we speak" Page:1
• "IPX complications" Page:1
• "My Sunblade 150" Page:1
• "Ultra 5 HDD Bracket" Page:1
• "/proc/openprom" Page:1
• "Sun Ultra 5/10 "Alternative" PCI video cards" Page:1
• "Gentoo-SPARC IRC channel" Page:1
• "no carrier signal on happy meal" Page:1
• "!!! Error calculating dependencies." Page:1
• "glibc 2.3.2-r3 now compiles !!" Page:1
• "Sun Blade 100 Keyboard Problems After Reboot" Page:1
• "problem emerging glibc with propolice" Page:1
• "Kernel trouble on enterprise 450" Page:1
• "SparcStation 5 and X?" Page:1
• "Netatalk" Page:1
• "Anybody run a SparkBook?" Page:1
• "compiling binaries for gentoo live cd" Page:1
• "FreeS/WAN ebuild for sparc masked..." Page:1
• "Ultra1 + raidtools problem (bad raid superblock)" Page:1
• "Help with a dial-in server?" Page:1
• "sys-apps/baselayout-1.8.6.12 broke net.eth0" Page:1
• "SunBlade 100 Booting Problems" Page:1
• "some advice & help ?" Page:1
• "Flash" Page:1
• "Sunblade 150" Page:1
• "silo boot failure "the file just loaded does not appear" Page:1
• "OpenOffice" Page:1
• "emerge -u portage on new Netra T1 install gawks" Page:1
• "SparcPrinter" Page:1
• "Error compiling kernel" Page:1
• "Dual Boot Problems on Ultra-5" Page:1
• "Future Gentoo Sparc" Page:1
• "unable to emerge x11-misc/ttmkfdir-3.0.9-r1" Page:1
• "seg fault fun with swapon" Page:1
• "Unable to emerge -u kbd-1.08-r4" Page:1
• "Unable to emerge KDE 3.1.4" Page:1
• "Many masked ebuilds on sparc?" Page:1
• "Ultra 5 > 512 MB RAM" Page:1
• "XF86Config for Sunblade w/ 3d Rage (XL)" Page:1
• "silo.conf sample in install instructions is misleading" Page:1
• "Flashing your boot PROM..." Page:1
• "No Network Connection on Ultra-5" Page:1
• "Anyone successful with 3C996B-T Gigabit NIC on Sparc?" Page:1
• "Which Live CD can be used for booting up?" Page:1
• "silo croaked" Page:1
• "emerge -u world issues with python-2.2 and glibc-2.3.2" Page:1
• "Problems with Xfree86" Page:1
• "SunBlade 100 Booting Question" Page:1
• "xinerama with pci possible?" Page:1
• "build kernel failed" Page:1
• "Sparc4/85 Help" Page:1
• "IBM RaidServe" Page:1
• "gdesklets" Page:1
• "Ultra5 boot problem" Page:1
• "A Dumb question re: 64bit" Page:1
• "[sparc v9] need atomic operations in assemly help" Page:1
• "problem while "emerge kde"" Page:1
• "Clockspeeds" Page:1
• "Sparc slower than PIII 550" Page:1
• "Ultra 2 parallel port" Page:1
• "cross-platform compile" Page:1
• "kernel compilation error" Page:1
• "Boot error: 'input in flex scanner failed'" Page:1
• "[howto] x-video extention for Xfree 4.3 and Mach64" Page:1
• "Flash for sun4u?" Page:1
• "Linux software RAID problems:" Page:1
• "Swapon /dev/sdx = Segementation Fault:" Page:1
• "Serial console on Ultra 10" Page:1
• "How about jfs?" Page:1
• "Netra X1 and Fire v100 network" Page:1
• "Minor typo in Sparc installation document" Page:1
• "Troubles compiling linux-2.4.21-sparc-r1 on Ultra1" Page:1
• "XFCE 4.0 Desktop Environment" Page:1
• "Problems with audio on ULTRA 10" Page:1
• "My compliments!" Page:1
• "sparc 5 question" Page:1
• "Preliminary audio results, Ultra 5" Page:1
• "console font / colors on Ultra 5" Page:1
• "Linux/Sparc Non-SUN Hardware Compatibility List" Page:1
• "New Video Cards and frame buffer consoles..." Page:1
• "Quick install guide for Nectra X1 (head-less cd-less)" Page:1
• "Java for Linux on Sparc?" Page:1
• "Video Card choices?" Page:1
• "Ok, then perhaps..." Page:1
• "Virtual Terminals coexisting with X..." Page:1
• "Sound on Ultra 5" Page:1
• "A few questions for Ultra10 owners please? Not many!" Page:1
• "info about root.img" Page:1
• "sunmouse baud rate" Page:1
• "Netra X1 console install HOWTO" Page:1
• "info about root.img" Page:1
• "info about root.img" Page:1
• "info about root.img" Page:1
• "info about root.img" Page:1
• "info about root.img" Page:1
• "info about root.img" Page:1
• "Info about howto build root.img" Page:1
• "Info about howto build root.img" Page:1
• "emerge openmotif errors" Page:1
• "problems trying to emerge libart_lgpl" Page:1
• "libperl busticated, preventing emerge system on install" Page:1
• "Local Sparc build source" Page:1
• "SILO magic 2GB boundary problem on SS10 (sun4m)" Page:1
• "SILO magic 2GB boundary on Sun4m (SS10) Problem" Page:1
• "SILO magic 2GB boundary on Sun4m (SS10) Problem" Page:1
• "SILO magic 2GB boundary on Sun4m (SS10) Problem" Page:1
• "SILO magic 2GB boundary on Sun4m (SS10) Problem" Page:1
• "Requested: XF86Config for Ultra60" Page:1
• "SunFastEthernet 1.0 2.0 2.1" Page:1
• "cgsix and X" Page:1
• "Sparc 5/110 boot problem" Page:1
• "new install missing /etc/modules.conf after reboot" Page:1
• "Sunblade 2000 livecd issues." Page:1
• "HDparm" Page:1
• "SILO error" Page:1
• "SILO error" Page:1
• "SILO error" Page:1
• "SILO problem" Page:1
• "SILO problem" Page:1
• "SILO problem" Page:1
• "SILO problem" Page:1
• "SILO problem" Page:1
• "Gentoo Sobre Sun Netra T1 Modelo 105" Page:1
• "Gentoo Sobre Sun Netra T1 Modelo 105" Page:1
• "Gentoo Sobre Sun Netra T1 Modelo 105" Page:1
• "Gentoo Sobre Sun Netra T1 Modelo 105" Page:1
• "Gentoo Sobre Sun Netra T1 Modelo 105" Page:1
• "bootstrap error" Page:1
• "/etc/fstab stage1 install" Page:1
• "error emerging mod_php" Page:1
• "XFree86 Keyboard Problem" Page:1
• "man problems" Page:1
• "Gentoo on SunFire v100" Page:1
• "openssh?" Page:1
• "What sparcs are people running?" Page:1
• "What sparcs are people running?" Page:2
• "What sparcs are people running?" Page:3
• "What sparcs are people running?" Page:4
• "What sparcs are people running?" Page:5
• "What sparcs are people running?" Page:6
• "What sparcs are people running?" Page:7
• "What sparcs are people running?" Page:8
• "What sparcs are people running?" Page:9
• "What sparcs are people running?" Page:10
• "What sparcs are people running?" Page:11
• "What sparcs are people running?" Page:12
• "What sparcs are people running?" Page:13
• "gentoo netboot" Page:1
• "gentoo netboot" Page:1
• "gentoo netboot" Page:1
• "Testing needed: Gnome 2.4" Page:1
• "Live-CD" Page:1
• "SunPCI?" Page:1
• "Blade 100 FAQ?" Page:1
• "Silo Alternatives" Page:1
• "emerge gcc-3.2.3-r1 fails (maybe propolice problem)" Page:1
• "new install wont boot" Page:1
• "complete total failure to make dualboot go ( silo.conf )" Page:1
• "games i got working today.. and the failures" Page:1
• "Ultra Sparc 1 -- Silo Kernel Issue" Page:1
• "Emerging mod_php" Page:1
• "status of sparc/~sparc games/emulation ebuilds" Page:1
• "Testing sparc64 GRP CDs now available" Page:1
• "Serial console on Ultra-5 not quite right" Page:1
• "Missed something with kernel?" Page:1
• "Test Request: apache and openoffice" Page:1
• "Kernel Compilation Issues On sun4u" Page:1
• "questions for those who have made ultra5 work" Page:1
• "Unresolved symbols mcount" Page:1
• "Sun QFE and Netra T1" Page:1
• "Kernel Panic after install, but not using liveCD" Page:1
• "IMPORTANT: 33 config files in /etc need updating..." Page:1
• "ss20 - heat dual cpu" Page:1
• "Using regular IDE drives" Page:1
• "unable to choose "whole disk" type in fdisk from L" Page:1
• "unable to set type to "whole disk" during fdisk" Page:1
• "unable to set type to "whole disk" during fdisk" Page:1
• "fdisk instructions on install doc wrong?" Page:1
• "fdisk instructions on install doc wrong?" Page:1
• "Ebuild for IPKungfu?" Page:1
• "broken gst-plugins" Page:1
• "Cross compilation" Page:1
• "semctl(semid,offset,SETVAL,ctl) doesn't on sparc-64?" Page:1
• "semctl(semid,offset,SETVAL,ctl) doesn't on sparc-64?" Page:1
• "semctl(semid,offset,SETVAL,ctl) doesn't on sparc-64?" Page:1
• "semctl(semid,offset,SETVAL,ctl) doesn't on sparc-64?" Page:1
• "semctl(semid,offset,SETVAL,ctl) doesn't on sparc-64?" Page:1
• "semctl(semid,offset,SETVAL,ctl) doesn't on sparc-64?" Page:1
• "semctl(semid,offset,SETVAL,ctl) doesn't on sparc-64?" Page:1
• "reference to linux/compile.h in init/version.c" Page:1
• "No unmasked ebuilds for libbonobo-2.1" Page:1
• "kernel panic! attempted to kill init! on sparc64" Page:1
• "Ultra 5, onboard ethnet dead, PCI card options?" Page:1
• "Sun Ultra5 Graphics Options" Page:1
• "PC Hardware" Page:1
• "swapon segfaults and then a silo problem" Page:1
• "I/O errors when running commands off LiveCD" Page:1
• "Silo problems (I want to play too, but mine are different!)" Page:1
• "Ultra 10 Kernel size" Page:1
• "Easy Ultra II stage 3 w/ KDE 3.1 install but no sound." Page:1
• "A fine day" Page:1
• "What should I do to install Gentoo without a net connections" Page:1
• "Netless Sparc Install?" Page:1
• "Aug-13 LiveCD" Page:1
• "Aug-11 LiveCD Hangups?" Page:1
• "Ultra 5 won't boot from CD" Page:1
• "cgfourteen anyone?" Page:1
• "Sparcstation 20/LiveCD - SILO won't boot the 'gentoo' image" Page:1
• "64-bit userland is sloooooooow" Page:1
• "shadow-4.8.3-r6 fails to build :(" Page:1
• "Ultra-2+kernel-2.4.21+xfree very unstable; Ultra-60, SS20 OK" Page:1
• "X with an Expert3D-Lite?" Page:1
• "Swapon segfaults" Page:1
• "gcc64 with ebuilds" Page:1
• "ATI 3D Rage Pro and Symbios-Logic 53c875" Page:1
• "Gentoo 1.4_RCx and Gentoo 1.4" Page:1
• "Emerge one file" Page:1
• "Bug with the experimental LiveCD" Page:1
• "X Resolution on Ultra 60 with Creator 3d" Page:1
• "Starting a FAQ" Page:1
• "LinuxWorld Expo Aug 5-7" Page:1
• "SPARCStation 5 anyone?" Page:1
• "make a static library" Page:1
• "Netbooting a Sparc for Installation via Debian TFTP image" Page:1
• "Gentoo crashes on Ultra 10" Page:1
• "64-bit progress (and near-success)" Page:1
• "Gentoo Installation on Sun Netra AX1150-500" Page:1
• "Success on Ultra5!" Page:1
• "Ulta 2 and sound" Page:1
• "sparc-sources-2.4.21-r1 b00fed?" Page:1
• "finally got ir up on Sun Fire V120" Page:1
• "emerge kde violates sandbox" Page:1
• "Sparc install w/distcc" Page:1
• "Mozilla Plugins" Page:1
• "Don't laugh: SparcStation VOYAGER - gentoo install possible?" Page:1
• "Silo: no serial device found" Page:1
• "Sun Creator3d Xfree driver?" Page:1
• "64-bit build progress" Page:1
• "libgsf-1.6.0 won't build" Page:1
• "g++ missing in gentoo-sparc64 1.4rc4 stage 1 tarball" Page:1
• "fully 64-bit build" Page:1
• "Enterprise 3000 error: Fast Data Access MMU Miss" Page:1
• "XFree86 4.3 improper monitor timing issue - fixed!" Page:1
• "New guy too everything>>>First problem--> Emerge" Page:1
• "kernel 2.6.0-test2" Page:1
• "Sun Ultra1 use/compile flags (what to use?)" Page:1
• "install doesnt boot, ultra1, bad magic number problem moreso" Page:1
• "New install won't boot" Page:1
• "New install won't boot" Page:2
• "New experimental stage tarballs" Page:1
• "chroot Segmentation Fault" Page:1
• "Setting up RAID" Page:1
• "make.conf help" Page:1
• "Keyboard issue in X" Page:1
• "Sun Blade-100 and /dev/random" Page:1
• "Network problem" Page:1
• "Gentoo Network install?" Page:1
• "Ultra5/Mach64/ poor resolution only!" Page:1
• "Tomcat starting automatically" Page:1
• "portage: Update type "robbat2" not recognized. it'" Page:1
• "ISO's for Sparc64?" Page:1
• "booting an E10K?" Page:1
• "Anyone get zope or plone to emerge?" Page:1
• "VFS: Cannot open root device /dev/hda3 or 03:03" Page:1
• "sparc32(sun4m)-SMP, experience or problems with pthreads." Page:1
• "Got postgres working but..." Page:1
• "Postgresql and Sparc?" Page:1
• "backups" Page:1
• "Sparc and portage snapshots" Page:1
• "Firebird SQL on sparc?" Page:1
• "Success on sunfire 100 (Finally!!!)" Page:1
• "chroot problem with fdisk" Page:1
• "sparc FDISK question" Page:1
• "Docs question" Page:1
• "Need some help with my sparc install on a sunfire 100" Page:1
• "Kernel booting problems on Ultra 2" Page:1
• "Kernel size" Page:1
• "Success on Netra X1 ?" Page:1
• "Success on an Ultra10 but some problems" Page:1
• "Sparc Install Doc Question?" Page:1
• "XFree86 DRI on SPARCstation5 (CG6 gfx)" Page:1
• "Changing the keymap when booting from the CD." Page:1
• "hyperstation30 manual/help request" Page:1
• "Help with my First Sparcstation 20" Page:1
• "SOLVED: Problem with emerge and gcc..." Page:1
• "psycopg build broken?" Page:1
• "gmplayer" Page:1
• "Sunblade 1000 type 6 usb keyboard problem" Page:1
• "Gentoo on Sun Blade 2000 / Ultrasparc III" Page:1
• "Ultra 5 install of the 1.4 iso docs" Page:1
• "Compiling 2.5/2.6 kernels" Page:1
• "Problem mounting /proc" Page:1
• "USE Flags" Page:1
• "Sparc Stage1 tarball burnt on an X86" Page:1
• "Problems with SILO" Page:1
• "usage of VIS-instruction set on Linux" Page:1
• "Latest ISO Images & Install Doc" Page:1
• "Recovering reiserfs" Page:1
• "silo on sparcstation5" Page:1
• "FrameBuffer Mode on CG6" Page:1
• "Installing on a Sunblade100 with gentoo-s32-s64-test3.iso" Page:1
• "Recommended patches?" Page:1
• "test iso gentoo-s32-s64-test2.iso problems" Page:1
• "use the aurora sparc distro cd for boot kernel 2.4" Page:1
• "xfree-4.3.0-r2 + opengl (Mesa, libGL) = ?" Page:1
• "ultra1 xfree type5 keyboard" Page:1
• "Remote X Sessions" Page:1
• "Recommendations wanted" Page:1
• "How to Install in SunFire v880?" Page:1
• "Anyone tried distcc with sparc and another architecture?" Page:1
• "new to sparc, not new to gentoo" Page:1
• "What is the current state of gentoo on sparc 32 systems" Page:1
• "speed expectancy for a Ultra1 Creator 3D ?" Page:1
• "Cross compiling for Sparc on Sparc64" Page:1
• "X question for Blade users" Page:1
• "GCC3.2 doesn't work for kernels" Page:1
• "Which ~arch to use on Sunblade 100?" Page:1
• "SparcStation 20 Issue, new install" Page:1
• "x on ultra 80?" Page:1
• "ultra1 kernel too big" Page:1
• "What chost?" Page:1
• "disks for an ultra 60" Page:1
• "Gentoo on E220 in production?" Page:1
• "gentoo on ultra 80, about hardware" Page:1
• "Ultrasparc IIi with orginal Keyboard and Mouse" Page:1
• "Sun Ethernet" Page:1
• "silo error on ultra 80" Page:1
• "sparc64 and egcs problems" Page:1
• "old sun hardware" Page:1
• "Is it worth putting Gentoo on my SPARC?" Page:1
• "Ultra 5 Performance" Page:1
• "reiserfs and SILO" Page:1
• "jdk on sparc" Page:1
• "I wrote some docs" Page:1
• "Can't boot a u2" Page:1
• "recommended hardware" Page:1
• "the new X" Page:1
• "Mozilla Ebuild Fails - Ultra 5" Page:1
• "List of problems/fixes with 1.1iso or Install docs" Page:1
• "SPARCstation 5 CD Install Using Stage3 Tarball" Page:1
• "YOUR DOCS need work" Page:1
• "Boot problems on Ultra 10" Page:1
• "Newbie: install from CD - unimp. sparc sys call 69" Page:1
• "Gentoo on a Keyboardless SUN box" Page:1
• "openoffice fails misserably" Page:1
• "Installation fails! Big Ugly box..." Page:1
• "browser plugins" Page:1
• "Sunblade 100 speaker" Page:1
• "Sun disklabel creation" Page:1
• "mkinitrd for sparc" Page:1
• "Problem installing on sparc. Kernel Panic after ramdisk" Page:1
• "Install - Chroot problem" Page:1
• "Configuring XFree86 on Ultra60 with Creator 3D" Page:1
• "About to install - any advice" Page:1
• "SS20 SMP boot problem" Page:1
• "sparc IPX" Page:1
• "who maintains ebuild files?" Page:1
• "sparcstation installation scsi (esp0) problem" Page:1
• "cross compiling a system" Page:1
• "trying to install kde" Page:1
• "trying to boot" Page:1
• "Sparc64 and -mno-fpu" Page:1
• "kernel on the sunblade 100" Page:1
• "v1.1a bootable cd on e3500 and starfire v880" Page:1
• "Sun Blade 150" Page:1
• "KDE 3.1 for sparc?" Page:1
• "Install: kernel version too old to chroot?" Page:1
• "TMPFS booting issue" Page:1
• "Problem compiling the kernel on install." Page:1
• "xfree-4.2.1-r2" Page:1
• "emerge silo-1.2.6 fails Exitcode 2" Page:1
• "wget says "connection refused" off of 1.1a iso" Page:1
• "sparc install bootstrap.sh problem" Page:1
• "losing settings during install" Page:1
• "Ultra 60 Dual Processor Question" Page:1
• "sparc64 + gcc64" Page:1
• "g++ problems" Page:1
• "how to make an install boot cd for my ultrasparc?" Page:1
• "Can't emerge KDE" Page:1
• "SPARCstation 20 Boot Problem" Page:1
• "New Sparc Owner" Page:1
• "Trying to automount network drives" Page:1
• "gentoo on sun E220" Page:1
• "Linux Driver for Sun Storedge Intelligent SCSI RAID" Page:1
• "Gentoo on Sparc32 Status" Page:1
• "XFree crashes on startup" Page:1
• "How much performance needed?" Page:1
• "Sparc 20 internal Hard Drive Max size?" Page:1
• "Bootable Sparc Image booting issues, Sparc Blade 100" Page:1
• "silo/bootloader problems" Page:1
• "portage problems" Page:1
• "gentoo server on sparc5?" Page:1
• "TTMKFDIR build problem on sparc 5" Page:1
• "more help need with fdisk" Page:1
• "Degree of Support for Sparc on Gentoo" Page:1
• "Gentoo on UltraSPARC-III?" Page:1
• "Silo config on Ultra 5" Page:1
• "Sparc 5 170mhz" Page:1
• "iptables & limit option and hwclock on Sun Ultra Sparc 5" Page:1
• "cdrecord problem on ultra30" Page:1
• "xfree ebuild fails" Page:1
• "bootstrap.sh overwrites make.conf" Page:1
• "Sparc 5 problems." Page:1
• "How to Flash Openboot Prom from linux" Page:1
• "mouse prolbem" Page:1
• "Installed on Ultra-1, get an error during boot...." Page:1
• "Question about "keywords" in an ebuild for sparc/6" Page:1
• "stupid masked stuff" Page:1
• "unable to mount root fs on 01:00" Page:1
• "Booting Gentoo on Netra T105" Page:1
• "Is Sparc32 Still being supported" Page:1
• "network unreachable thru PIX Firewall" Page:1
• "ultra 1 X problem" Page:1
• "GCC64 3.2?" Page:1
• "2.4.20p5/p6 sparc64 kernel failure" Page:1
• "ss20 boot problems - 2.4.19" Page:1
• "Netra X1 sucesses and failures" Page:1
• "Troubles with sparc64 installation" Page:1
• "error while loading ramdisk on sparc" Page:1
• "new sparc64 stage1" Page:1
• "new sparc64 stage1" Page:2
• "apache + openssl on a ultra10" Page:1
• "How to get the sound UP" Page:1
• "bootfloppy for: SPARCstation IPX" Page:1
• "Ultra 1 performance." Page:1
• "Sparc ISOs are missing?" Page:1
• "Emerge Issue(s)" Page:1
• "Gentoo sparc install error(emerge system)" Page:1
• "Gentoo-Sparc newbie questions" Page:1
• "Problem with install(partition disk)" Page:1
• "Firebird broken on Sparc" Page:1
• "More SparcStation 20 Booting issues" Page:1
• "KDE 3" Page:1
• "installation files for Sparc64" Page:1
• "SparcStation 20 booting issues (tmpfs)" Page:1
• "X on Gentoo" Page:1
• "GCC3.1 64 bit support?" Page:1
• "Problems with X" Page:1
• "Second stage 'emerge system' problem" Page:1
• "SunBlade 100?" Page:1
• "Keyboard problem" Page:1
• "Issues with emerge rsync during install" Page:1
• "SFast Data Access MMU Miss" Page:1
• "Writing a how to for Gentoo for Sparc" Page:1
• "problems creating disklabel on ibm ddys t18350" Page:1
• "What to do after reaching the second stage?" Page:1
• "gentoo sparc - iso?" Page:1
• "SparcLX" Page:1
• "openssl-0.9.6d error" Page:1
• "X Problem on Gentoo Ultra 60" Page:1